[PATCH v10 01/24] dt-bindings: mailbox: Add bindings for RPMI shared memory transport

[Anup Patel <apatel@ventanamicro.com>]

Add device tree bindings for the common RISC-V Platform Management
Interface (RPMI) shared memory transport as a mailbox controller.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 .../mailbox/riscv,rpmi-shmem-mbox.yaml        | 124 ++++++++++++++++++
 1 file changed, 124 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/riscv,rpmi-shmem-mbox.yaml

diff --git a/Documentation/devicetree/bindings/mailbox/riscv,rpmi-shmem-mbox.yaml b/Documentation/devicetree/bindings/mailbox/riscv,rpmi-shmem-mbox.yaml
new file mode 100644
index 000000000000..3aabc52a0c03
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/riscv,rpmi-shmem-mbox.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/riscv,rpmi-shmem-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V Platform Management Interface (RPMI) shared memory mailbox
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description: |
+  The RISC-V Platform Management Interface (RPMI) [1] defines a common shared
+  memory based RPMI transport. This RPMI shared memory transport integrates as
+  mailbox controller in the SBI implementation or supervisor software whereas
+  each RPMI service group is mailbox client in the SBI implementation and
+  supervisor software.
+
+  ===========================================
+  References
+  ===========================================
+
+  [1] RISC-V Platform Management Interface (RPMI) v1.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-rpmi/releases
+
+properties:
+  compatible:
+    const: riscv,rpmi-shmem-mbox
+
+  reg:
+    minItems: 2
+    items:
+      - description: A2P request queue base address
+      - description: P2A acknowledgment queue base address
+      - description: P2A request queue base address
+      - description: A2P acknowledgment queue base address
+      - description: A2P doorbell address
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: a2p-req
+      - const: p2a-ack
+      - enum: [ p2a-req, a2p-doorbell ]
+      - const: a2p-ack
+      - const: a2p-doorbell
+
+  interrupts:
+    maxItems: 1
+    description:
+      The RPMI shared memory transport supports P2A doorbell as a wired
+      interrupt and this property specifies the interrupt source.
+
+  msi-parent:
+    description:
+      The RPMI shared memory transport supports P2A doorbell as a system MSI
+      and this property specifies the target MSI controller.
+
+  riscv,slot-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 64
+    description:
+      Power-of-2 RPMI slot size of the RPMI shared memory transport.
+
+  riscv,a2p-doorbell-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x1
+    description:
+      Value written to the 32-bit A2P doorbell register.
+
+  riscv,p2a-doorbell-sysmsi-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The RPMI shared memory transport supports P2A doorbell as a system MSI
+      and this property specifies system MSI index to be used for configuring
+      the P2A doorbell MSI.
+
+  "#mbox-cells":
+    const: 1
+    description:
+      The first cell specifies RPMI service group ID.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - riscv,slot-size
+  - "#mbox-cells"
+
+anyOf:
+  - required:
+      - interrupts
+  - required:
+      - msi-parent
+
+additionalProperties: false
+
+examples:
+  - |
+    // Example 1 (RPMI shared memory with only 2 queues):
+    mailbox@10080000 {
+        compatible = "riscv,rpmi-shmem-mbox";
+        reg = <0x10080000 0x10000>,
+              <0x10090000 0x10000>;
+        reg-names = "a2p-req", "p2a-ack";
+        msi-parent = <&imsic_mlevel>;
+        riscv,slot-size = <64>;
+        #mbox-cells = <1>;
+    };
+  - |
+    // Example 2 (RPMI shared memory with only 4 queues):
+    mailbox@10001000 {
+        compatible = "riscv,rpmi-shmem-mbox";
+        reg = <0x10001000 0x800>,
+              <0x10001800 0x800>,
+              <0x10002000 0x800>,
+              <0x10002800 0x800>,
+              <0x10003000 0x4>;
+        reg-names = "a2p-req", "p2a-ack", "p2a-req", "a2p-ack", "a2p-doorbell";
+        msi-parent = <&imsic_mlevel>;
+        riscv,slot-size = <64>;
+        riscv,a2p-doorbell-value = <0x00008000>;
+        #mbox-cells = <1>;
+    };
-- 
2.43.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv