[PATCH 1/2] riscv: dts: spacemit: Make dtschema recognize the etherent PHY correctly on K3 pico-itx board

[PATCH 1/2] riscv: dts: spacemit: Make dtschema recognize the etherent PHY correctly on K3 pico-itx board

[Inochi Amaoto]

Since the previous commit does not change the phy node name,
the dtschema can not recognize the type of the ethernet phy,
so the following error is produced:

/arch/riscv/boot/dts/spacemit/k3-pico-itx.dtb: phy@1 (ethernet-phy-id001c.c916): $nodename:0: 'phy@1' does not match '^ethernet-phy(@[a-f0-9]+)?$'
        from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml
/arch/riscv/boot/dts/spacemit/k3-pico-itx.dtb: phy@1 (ethernet-phy-id001c.c916): Unevaluated properties are not allowed ('reg', 'reset-assert-us', 're
set-deassert-us', 'reset-gpios' were unexpected)
        from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml

Change the nodename to make the dtschema can recognize the right
PHY type.

Fixes: 6d6536c880fe ("riscv: dts: spacemit: Fix phy id check for the phy on pico-itx board")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
---
 arch/riscv/boot/dts/spacemit/k3-pico-itx.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
index d78416f3118e..e91a4712f2db 100644
--- a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
@@ -195,7 +195,7 @@ &eth0 {
 	status = "okay";
 
 	mdio {
-		phy0: phy@1 {
+		phy0: ethernet-phy@1 {
 			compatible = "ethernet-phy-id001c.c916";
 			reg = <1>;
 			reset-gpios = <&gpio 0 15 GPIO_ACTIVE_LOW>;
-- 
2.55.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 2/2] riscv: dts: spacemit: Make dtschema recognize the etherent PHY correctly on K3 com260 board

[Inochi Amaoto]

Since the previous commit does not change the phy node name,
the dtschema can not recognize the type of the ethernet phy,
so the following error is produced:

/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dtb: phy@1 (ethernet-phy-id001c.c916): $nodename:0: 'phy@1' does not match '^ethernet-phy(@[a-f0-9]+)?$'
        from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml
/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dtb: phy@1 (ethernet-phy-id001c.c916): Unevaluated properties are not allowed ('reg', 'reset-assert-us', '
reset-deassert-us', 'reset-gpios' were unexpected)
        from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml

Change the nodename to make the dtschema can recognize the right
PHY type.

Fixes: 9db839d52ccd ("riscv: dts: spacemit: Fix phy id check for the phy on com260 board")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
---
 arch/riscv/boot/dts/spacemit/k3-com260.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/spacemit/k3-com260.dtsi b/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
index 2a07cd8f2a56..c7a04a338d08 100644
--- a/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
@@ -173,7 +173,7 @@ &eth1 {
 	status = "okay";
 
 	mdio {
-		phy1: phy@1 {
+		phy1: ethernet-phy@1 {
 			compatible = "ethernet-phy-id001c.c916";
 			reg = <1>;
 			reset-gpios = <&gpio 1 5 GPIO_ACTIVE_LOW>;
-- 
2.55.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 1/2] riscv: dts: spacemit: Make dtschema recognize the etherent PHY correctly on K3 pico-itx board

[Yixun Lan]

Hi Inochi,
 lacking cover letter, although it's not a really big problem..

On 09:24 Wed 29 Jul     , Inochi Amaoto wrote:
> Since the previous commit does not change the phy node name,
> the dtschema can not recognize the type of the ethernet phy,
> so the following error is produced:
> 
> /arch/riscv/boot/dts/spacemit/k3-pico-itx.dtb: phy@1 (ethernet-phy-id001c.c916): $nodename:0: 'phy@1' does not match '^ethernet-phy(@[a-f0-9]+)?$'
>         from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml
> /arch/riscv/boot/dts/spacemit/k3-pico-itx.dtb: phy@1 (ethernet-phy-id001c.c916): Unevaluated properties are not allowed ('reg', 'reset-assert-us', 're
> set-deassert-us', 'reset-gpios' were unexpected)
>         from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml
> 
> Change the nodename to make the dtschema can recognize the right
> PHY type.
> 
> Fixes: 6d6536c880fe ("riscv: dts: spacemit: Fix phy id check for the phy on pico-itx board")
> Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Looks good, thanks for the fix

Reviewed-by: Yixun Lan <dlan@kernel.org>
> ---
>  arch/riscv/boot/dts/spacemit/k3-pico-itx.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
> index d78416f3118e..e91a4712f2db 100644
> --- a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
> +++ b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
> @@ -195,7 +195,7 @@ &eth0 {
>  	status = "okay";
>  
>  	mdio {
> -		phy0: phy@1 {
> +		phy0: ethernet-phy@1 {
>  			compatible = "ethernet-phy-id001c.c916";
>  			reg = <1>;
>  			reset-gpios = <&gpio 0 15 GPIO_ACTIVE_LOW>;
> -- 
> 2.55.0
> 

-- 
Yixun Lan (dlan)

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 2/2] riscv: dts: spacemit: Make dtschema recognize the etherent PHY correctly on K3 com260 board

[Yixun Lan]

On 09:24 Wed 29 Jul     , Inochi Amaoto wrote:
> Since the previous commit does not change the phy node name,
> the dtschema can not recognize the type of the ethernet phy,
> so the following error is produced:
> 
> /arch/riscv/boot/dts/spacemit/k3-com260-ifx.dtb: phy@1 (ethernet-phy-id001c.c916): $nodename:0: 'phy@1' does not match '^ethernet-phy(@[a-f0-9]+)?$'
>         from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml
> /arch/riscv/boot/dts/spacemit/k3-com260-ifx.dtb: phy@1 (ethernet-phy-id001c.c916): Unevaluated properties are not allowed ('reg', 'reset-assert-us', '
> reset-deassert-us', 'reset-gpios' were unexpected)
>         from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml
> 
> Change the nodename to make the dtschema can recognize the right
> PHY type.
> 
> Fixes: 9db839d52ccd ("riscv: dts: spacemit: Fix phy id check for the phy on com260 board")
> Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Also, with my R-B
Reviewed-by: Yixun Lan <dlan@kernel.org>

-- 
Yixun Lan (dlan)

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv