* [PATCH v5 1/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add P1 PMIC regulator tree
2026-11-17 5:43 [PATCH v5 0/3] Enable USB and SD for Deepcomputing FML13V05 board Sandie Cao
@ 2026-11-17 5:45 ` Sandie Cao
2026-11-17 5:45 ` [PATCH v5 2/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add USB controller and USB phy support Sandie Cao
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Sandie Cao @ 2026-11-17 5:45 UTC (permalink / raw)
To: Yixun Lan, Troy Mitchell, Conor Dooley, Rob Herring,
Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou
Cc: Alexandre Ghiti, devicetree, linux-riscv, spacemit, linux-kernel,
Sandie Cao
Add the P1 PMIC's regulator topology tree for DeepComputing FML13V05 board
Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
---
.../spacemit/k3-deepcomputing-fml13v05.dts | 148 ++++++++++++++++++
1 file changed, 148 insertions(+)
diff --git a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
index b5d5112de358..e061233c15a3 100644
--- a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
@@ -22,6 +22,154 @@ memory@100000000 {
device_type = "memory";
reg = <0x1 0x00000000 0x4 0x00000000>;
};
+
+ reg_aux_vcc5v: regulator-aux-vcc5v {
+ compatible = "regulator-fixed";
+ regulator-name = "AUX_VCC5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&i2c8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c8_cfg>;
+ status = "okay";
+
+ pmic@41 {
+ compatible = "spacemit,p1";
+ reg = <0x41>;
+ interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+ vin1-supply = <®_aux_vcc5v>;
+ vin2-supply = <®_aux_vcc5v>;
+ vin3-supply = <®_aux_vcc5v>;
+ vin4-supply = <®_aux_vcc5v>;
+ vin5-supply = <®_aux_vcc5v>;
+ vin6-supply = <®_aux_vcc5v>;
+ aldoin-supply = <®_aux_vcc5v>;
+ dldoin1-supply = <&buck4>;
+ dldoin2-supply = <&buck4>;
+
+ regulators {
+ buck1: buck1 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <5000>;
+ regulator-always-on;
+ };
+
+ buck2: buck2 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <5000>;
+ regulator-always-on;
+ };
+
+ buck3: buck3 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-ramp-delay = <5000>;
+ regulator-always-on;
+ };
+
+ buck4: buck4 {
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-ramp-delay = <5000>;
+ regulator-always-on;
+ };
+
+ buck5: buck5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <5000>;
+ regulator-always-on;
+ };
+
+ buck6: buck6 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <500000>;
+ regulator-ramp-delay = <5000>;
+ regulator-always-on;
+ };
+
+ aldo1: aldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ aldo2: aldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ aldo3: aldo3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <3400000>;
+ };
+
+ aldo4: aldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dldo1: dldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dldo2: dldo2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dldo3: dldo3 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dldo4: dldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dldo5: dldo5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dldo6: dldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dldo7: dldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
};
&uart0 {
--
2.43.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v5 2/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add USB controller and USB phy support
2026-11-17 5:43 [PATCH v5 0/3] Enable USB and SD for Deepcomputing FML13V05 board Sandie Cao
2026-11-17 5:45 ` [PATCH v5 1/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add P1 PMIC regulator tree Sandie Cao
@ 2026-11-17 5:45 ` Sandie Cao
2026-11-17 5:46 ` [PATCH v5 3/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: Enable SD card support Sandie Cao
2026-11-18 6:34 ` [PATCH v5 0/3] Enable USB and SD for Deepcomputing FML13V05 board Yixun Lan
3 siblings, 0 replies; 5+ messages in thread
From: Sandie Cao @ 2026-11-17 5:45 UTC (permalink / raw)
To: Yixun Lan, Troy Mitchell, Conor Dooley, Rob Herring,
Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou
Cc: Alexandre Ghiti, devicetree, linux-riscv, spacemit, linux-kernel,
Sandie Cao
Add a USB 2.0 hub under the USB 2.0 controller node, to which devices such
as the USB Bluetooth, USB fingerprint and USB camera are attached.
Add USB 3.0 device node (b, c, d).
- Port b: PD 3.0 (65W Max), USB 3.2 Gen 1
- Port c: USB 3.2 Gen 1
- Port d: PD 3.0 (65W Max), USB 3.2 Gen 1, DP 1.4 (4K@60Hz)
Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
---
.../spacemit/k3-deepcomputing-fml13v05.dts | 50 +++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
index e061233c15a3..bcd533484a73 100644
--- a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
@@ -172,8 +172,58 @@ dldo7: dldo7 {
};
};
+&combophy {
+ spacemit,apmu = <&syscon_apmu 0x17>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_0_cfg>;
status = "okay";
};
+
+&usb2_host {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub@1 {
+ compatible = "usb5e3,608";
+ reg = <1>;
+ };
+};
+
+&usb2_phy {
+ status = "okay";
+};
+
+&usb3b_u2phy {
+ status = "okay";
+};
+
+&usb3b {
+ phys = <&usb3b_u2phy>, <&combophy 2 PHY_TYPE_USB3>;
+ phy-names = "usb2-phy", "usb3-phy";
+ status = "okay";
+};
+
+&usb3c_u2phy {
+ status = "okay";
+};
+
+&usb3c {
+ phys = <&usb3c_u2phy>, <&combophy 3 PHY_TYPE_USB3>;
+ phy-names = "usb2-phy", "usb3-phy";
+ status = "okay";
+};
+
+&usb3d_u2phy {
+ status = "okay";
+};
+
+&usb3d {
+ phys = <&usb3d_u2phy>, <&combophy 4 PHY_TYPE_USB3>;
+ phy-names = "usb2-phy", "usb3-phy";
+ status = "okay";
+};
--
2.43.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v5 3/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: Enable SD card support
2026-11-17 5:43 [PATCH v5 0/3] Enable USB and SD for Deepcomputing FML13V05 board Sandie Cao
2026-11-17 5:45 ` [PATCH v5 1/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add P1 PMIC regulator tree Sandie Cao
2026-11-17 5:45 ` [PATCH v5 2/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add USB controller and USB phy support Sandie Cao
@ 2026-11-17 5:46 ` Sandie Cao
2026-11-18 6:34 ` [PATCH v5 0/3] Enable USB and SD for Deepcomputing FML13V05 board Yixun Lan
3 siblings, 0 replies; 5+ messages in thread
From: Sandie Cao @ 2026-11-17 5:46 UTC (permalink / raw)
To: Yixun Lan, Troy Mitchell, Conor Dooley, Rob Herring,
Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou
Cc: Alexandre Ghiti, devicetree, linux-riscv, spacemit, linux-kernel,
Sandie Cao
Add the device tree node SDHCI-0 controller for onboard Micro SD card slot.
Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
---
.../dts/spacemit/k3-deepcomputing-fml13v05.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
index bcd533484a73..a80d32fe6f7f 100644
--- a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
@@ -177,6 +177,23 @@ &combophy {
status = "okay";
};
+&sdhci0 {
+ pinctrl-names = "default","uhs";
+ pinctrl-0 = <&mmc1_cfg>;
+ pinctrl-1 = <&mmc1_uhs_cfg>;
+ bus-width = <4>;
+ broken-cd;
+ no-mmc;
+ no-sdio;
+ disable-wp;
+ cap-sd-highspeed;
+ vqmmc-supply = <&aldo1>;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_0_cfg>;
--
2.43.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v5 0/3] Enable USB and SD for Deepcomputing FML13V05 board
2026-11-17 5:43 [PATCH v5 0/3] Enable USB and SD for Deepcomputing FML13V05 board Sandie Cao
` (2 preceding siblings ...)
2026-11-17 5:46 ` [PATCH v5 3/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: Enable SD card support Sandie Cao
@ 2026-11-18 6:34 ` Yixun Lan
3 siblings, 0 replies; 5+ messages in thread
From: Yixun Lan @ 2026-11-18 6:34 UTC (permalink / raw)
To: Sandie Cao
Cc: Troy Mitchell, Conor Dooley, Rob Herring, Krzysztof Kozlowski,
Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti,
devicetree, linux-riscv, spacemit, linux-kernel
On 13:43 Tue 17 Nov , Sandie Cao wrote:
> This series updates Deepcomputing FML13V05 Device Tree: Add P1 PMIC
> regulator tree, add USB controller and USB phy, Enable SD card.
>
> This series is rebased on next-20261116.
>
For the series, with
Reviewed-by: Yixun Lan <dlan@kernel.org>
--
Yixun Lan (dlan)
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 5+ messages in thread