[PATCH net-next v12 0/7] net: stmmac: qcom-ethqos: add support for SCMI power domains

[PATCH net-next v12 0/7] net: stmmac: qcom-ethqos: add support for SCMI power domains

[Bartosz Golaszewski]

Add support for the firmware-managed variant of the DesignWare MAC on
the sa8255p platform. This series contains new DT bindings and driver
changes required to support the MAC in the STMMAC driver.

It also reorganizes the ethqos code quite a bit to make the introduction
of power domains into the driver a bit easier on the eye.

The DTS changes will go in separately.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
Changes in v12:
- Drop the power-domain-names from the SGMII PHY DT bindings
- Add missing Kconfig dependency on PM for the new SGMII PHY driver
- Link to v11: https://patch.msgid.link/20260629-qcom-sa8255p-emac-v11-0-1b7fb95b51f9@oss.qualcomm.com

Changes in v11:
- Take a new approach: add a dedicated driver for the firmware-managed
  SGMII PHY and simplify changes made to the MAC driver
- Link to v10: https://patch.msgid.link/20260323-qcom-sa8255p-emac-v10-0-79302b238a16@oss.qualcomm.com

Changes in v10:
- Fix unit address in DT example
- Link to v9: https://patch.msgid.link/20260316-qcom-sa8255p-emac-v9-0-c58934e76ff2@oss.qualcomm.com

Changes in v9:
- Rebase on top of current linux-next again
- Link to v8: https://patch.msgid.link/20260311-qcom-sa8255p-emac-v8-0-58227bcf1018@oss.qualcomm.com

Changes in v8:
- Rebase on top of recent changes in linux-next which required an
  extensive rework
- Drop partial R-b tags
- Link to v7: https://patch.msgid.link/20260306-qcom-sa8255p-emac-v7-0-d6a3013094b7@oss.qualcomm.com

Changes in v7:
- Restored the correct authorship after learning git uses .mailmap for
  the --author switch
- Rebased on top of changes from Russell
- Fixed resource management issues in error paths
- Link to v6: https://lore.kernel.org/r/20260112-qcom-sa8255p-emac-v6-0-86a3d4b2ad83@oss.qualcomm.com

Changes in v6:
- Fix $id value in the bindings
- Drop patch 3/8 from the series
- Update init/exit callback signatures
- Link to v5: https://lore.kernel.org/r/20251107-qcom-sa8255p-emac-v5-0-01d3e3aaf388@linaro.org
- Link to v6: https://lore.kernel.org/r/20251219-qcom-sa8255p-emac-v6-0-487f1082461e@oss.qualcomm.com

Changes in v5:
- Name the DT binding document after the new compatbile
- Add missing space
- Make the power-domains limits stricter
- Link to v4: https://lore.kernel.org/r/20251104-qcom-sa8255p-emac-v4-0-f76660087cea@linaro.org

Changes in v4:
- Remove the phys property from the SCMI bindings
- Mark the power-domain-names property as required
- Set maxItems for power-domains to 1 for all existing bindings to
  maintain the current requirements after modifying the value in the
  top-level document
- Link to v3: https://lore.kernel.org/r/20251027-qcom-sa8255p-emac-v3-0-75767b9230ab@linaro.org

Changes in v3:
- Drop 'power' and 'perf' prefixes from power domain names
- Rebase on top of Russell's changes to dwmac
- Rebase on top of even more changes from Russell that are not yet
  in next (E1vB6ld-0000000BIPy-2Qi4@rmk-PC.armlinux.org.uk)
- Link to v2: https://lore.kernel.org/all/20251008-qcom-sa8255p-emac-v2-0-92bc29309fce@linaro.org/

Changes in v2:
- Fix the power-domains property in DT bindings
- Rework the DT bindings example
- Drop the DTS patch, it will go upstream separately
- Link to v1: https://lore.kernel.org/r/20250910-qcom-sa8255p-emac-v1-0-32a79cf1e668@linaro.org

---
Bartosz Golaszewski (7):
      dt-bindings: phy: document the serdes PHY on sa8255p
      phy: qcom: add the SGMII SerDes PHY driver for SCMI systems
      dt-bindings: net: qcom: document the ethqos device for SCMI-based systems
      net: stmmac: qcom-ethqos: set serdes mode before powerup
      net: stmmac: qcom-ethqos: reuse the address of ethqos_emac_driver_data
      net: stmmac: qcom-ethqos: factor out linux-level setup into a separate function
      net: stmmac: qcom-ethqos: add support for sa8255p

 .../bindings/net/allwinner,sun7i-a20-gmac.yaml     |   3 +
 .../bindings/net/altr,socfpga-stmmac.yaml          |   3 +
 .../bindings/net/amlogic,meson-dwmac.yaml          |   3 +
 .../devicetree/bindings/net/eswin,eic7700-eth.yaml |   3 +
 .../devicetree/bindings/net/intel,dwmac-plat.yaml  |   3 +
 .../bindings/net/loongson,ls1b-gmac.yaml           |   3 +
 .../bindings/net/loongson,ls1c-emac.yaml           |   3 +
 .../devicetree/bindings/net/nxp,dwmac-imx.yaml     |   3 +
 .../devicetree/bindings/net/nxp,lpc1850-dwmac.yaml |   3 +
 .../devicetree/bindings/net/nxp,s32-dwmac.yaml     |   3 +
 .../devicetree/bindings/net/qcom,ethqos.yaml       |   3 +
 .../bindings/net/qcom,sa8255p-ethqos.yaml          | 107 ++++++++++
 .../devicetree/bindings/net/renesas,rzn1-gmac.yaml |   3 +
 .../bindings/net/renesas,rzv2h-gbeth.yaml          |   3 +
 .../devicetree/bindings/net/rockchip-dwmac.yaml    |   3 +
 .../devicetree/bindings/net/snps,dwmac.yaml        |   5 +-
 .../bindings/net/sophgo,cv1800b-dwmac.yaml         |   3 +
 .../bindings/net/sophgo,sg2044-dwmac.yaml          |   3 +
 .../bindings/net/starfive,jh7110-dwmac.yaml        |   3 +
 .../devicetree/bindings/net/stm32-dwmac.yaml       |   3 +
 .../devicetree/bindings/net/tesla,fsd-ethqos.yaml  |   3 +
 .../devicetree/bindings/net/thead,th1520-gmac.yaml |   3 +
 .../bindings/net/toshiba,visconti-dwmac.yaml       |   3 +
 .../bindings/phy/qcom,sa8255p-dwmac-sgmii-phy.yaml |  50 +++++
 MAINTAINERS                                        |   1 +
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 230 ++++++++++++++++-----
 drivers/phy/qualcomm/Kconfig                       |  11 +
 drivers/phy/qualcomm/Makefile                      |   1 +
 drivers/phy/qualcomm/phy-qcom-sgmii-eth-scmi.c     | 161 +++++++++++++++
 29 files changed, 573 insertions(+), 56 deletions(-)
---
base-commit: ca70e9a43a66435fda3a9d37f90c9c3b7bf211f6
change-id: 20250704-qcom-sa8255p-emac-8460235ac512

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH net-next v12 1/7] dt-bindings: phy: document the serdes PHY on sa8255p

[Bartosz Golaszewski]

Describe the SGMII/SerDes PHY present on the Qualcomm sa8255p platforms.
This is essentially the same hardware as sa8775p rev3 but the PHY is
managed by firmware over SCMI.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 .../bindings/phy/qcom,sa8255p-dwmac-sgmii-phy.yaml | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sa8255p-dwmac-sgmii-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sa8255p-dwmac-sgmii-phy.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..9e846e381555514bb32177f884abf0cf2c942948
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,sa8255p-dwmac-sgmii-phy.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sa8255p-dwmac-sgmii-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SerDes/SGMII ethernet PHY controller (firmware managed)
+
+maintainers:
+  - Bartosz Golaszewski <brgl@kernel.org>
+
+description:
+  The SerDes PHY sits between the MAC and the external PHY and provides
+  separate Rx Tx lines.
+
+properties:
+  compatible:
+    const: qcom,sa8255p-dwmac-sgmii-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  power-domains:
+    maxItems: 1
+
+  power-domain-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - power-domains
+  - power-domain-names
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@8901000 {
+        compatible = "qcom,sa8255p-dwmac-sgmii-phy";
+        reg = <0x08901000 0xe10>;
+        #phy-cells = <0>;
+        power-domains = <&scmi7_dvfs 0>;
+        power-domain-names = "serdes";
+    };

-- 
2.47.3


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH net-next v12 2/7] phy: qcom: add the SGMII SerDes PHY driver for SCMI systems

[Bartosz Golaszewski]

Implement support for the firmware-managed SGMII/SerDes PHY present on
Qualcomm platforms. Do this as a separate driver from the HLOS-managed
variant as they don't share almost any code.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 drivers/phy/qualcomm/Kconfig                   |  11 ++
 drivers/phy/qualcomm/Makefile                  |   1 +
 drivers/phy/qualcomm/phy-qcom-sgmii-eth-scmi.c | 161 +++++++++++++++++++++++++
 3 files changed, 173 insertions(+)

diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index 60a0ead127fa9f08749e1bc686e15cc5eb341c28..a7cf348f6a7aa18e8b3f39f109b02ea672ae4177 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -232,3 +232,14 @@ config PHY_QCOM_SGMII_ETH
 	help
 	  Enable this to support the internal SerDes/SGMII PHY on various
 	  Qualcomm chipsets.
+
+config PHY_QCOM_SGMII_ETH_SCMI
+	tristate "Qualcomm DWMAC SGMII SerDes/PHY driver (firmware managed)"
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	select GENERIC_PHY
+	select PM
+	select PM_GENERIC_DOMAINS
+	help
+	  Enable this to support the internal SerDes/SGMII PHY on Qualcomm
+	  chipsets where the SerDes hardware (clocks and registers) is owned
+	  by the firmware.
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index b71a6a0bed3f1489b1d07664ecd728f1db145986..032e582f2e1af96687484ce28aaba0c2ef73e754 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -25,3 +25,4 @@ obj-$(CONFIG_PHY_QCOM_USB_SS)		+= phy-qcom-usb-ss.o
 obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2)+= phy-qcom-snps-femto-v2.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_USB)	+= phy-qcom-ipq806x-usb.o
 obj-$(CONFIG_PHY_QCOM_SGMII_ETH)	+= phy-qcom-sgmii-eth.o
+obj-$(CONFIG_PHY_QCOM_SGMII_ETH_SCMI)	+= phy-qcom-sgmii-eth-scmi.o
diff --git a/drivers/phy/qualcomm/phy-qcom-sgmii-eth-scmi.c b/drivers/phy/qualcomm/phy-qcom-sgmii-eth-scmi.c
new file mode 100644
index 0000000000000000000000000000000000000000..8ee62189556fe4ff0d8aa2f8b105175e08000b7c
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-sgmii-eth-scmi.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ *
+ * Firmware-managed variant of the Qualcomm DWMAC SGMII SerDes/PHY driver.
+ */
+
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+
+struct qcom_dwmac_sgmii_phy_scmi {
+	unsigned int perf_state;
+};
+
+static int qcom_dwmac_sgmii_phy_scmi_power_on(struct phy *phy)
+{
+	struct qcom_dwmac_sgmii_phy_scmi *priv = phy_get_drvdata(phy);
+	struct device *dev = phy->dev.parent;
+	int ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		return ret;
+
+	ret = dev_pm_genpd_set_performance_state(dev, priv->perf_state);
+	if (ret) {
+		pm_runtime_put(dev);
+		return ret;
+	}
+
+	usleep_range(5000, 10000);
+
+	return 0;
+}
+
+static int qcom_dwmac_sgmii_phy_scmi_power_off(struct phy *phy)
+{
+	struct device *dev = phy->dev.parent;
+
+	dev_pm_genpd_set_performance_state(dev, 0);
+	pm_runtime_put(dev);
+
+	return 0;
+}
+
+static int qcom_dwmac_sgmii_phy_scmi_validate(struct phy *phy, enum phy_mode mode,
+					      int submode,
+					      union phy_configure_opts *opts)
+{
+	if (mode != PHY_MODE_ETHERNET)
+		return -EINVAL;
+
+	switch (submode) {
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_1000BASEX:
+	case PHY_INTERFACE_MODE_2500BASEX:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int qcom_dwmac_sgmii_phy_scmi_set_mode(struct phy *phy, enum phy_mode mode,
+					      int submode)
+{
+	struct qcom_dwmac_sgmii_phy_scmi *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = qcom_dwmac_sgmii_phy_scmi_validate(phy, mode, submode, NULL);
+	if (ret)
+		return ret;
+
+	priv->perf_state = (submode == PHY_INTERFACE_MODE_2500BASEX) ?
+			   SPEED_2500 : SPEED_1000;
+
+	return 0;
+}
+
+static const struct phy_ops qcom_dwmac_sgmii_phy_scmi_ops = {
+	.power_on	= qcom_dwmac_sgmii_phy_scmi_power_on,
+	.power_off	= qcom_dwmac_sgmii_phy_scmi_power_off,
+	.set_mode	= qcom_dwmac_sgmii_phy_scmi_set_mode,
+	.validate	= qcom_dwmac_sgmii_phy_scmi_validate,
+	.owner		= THIS_MODULE,
+};
+
+static void qcom_dwmac_sgmii_phy_scmi_runtime_disable(void *data)
+{
+	struct device *dev = data;
+
+	pm_runtime_disable(dev);
+}
+
+static int qcom_dwmac_sgmii_phy_scmi_probe(struct platform_device *pdev)
+{
+	struct qcom_dwmac_sgmii_phy_scmi *priv;
+	struct device *dev = &pdev->dev;
+	struct phy_provider *provider;
+	struct phy *phy;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->perf_state = SPEED_1000;
+
+	/*
+	 * Enable runtime PM on the provider before creating the PHY so that the
+	 * PHY core enables runtime PM on the PHY device too. The single SCMI
+	 * power domain has already been attached to this device by the driver
+	 * core, so runtime PM votes propagate to firmware through the genpd
+	 * device link. No register or clock access is done here - firmware owns
+	 * the SerDes.
+	 */
+	pm_runtime_enable(dev);
+
+	ret = devm_add_action_or_reset(dev, qcom_dwmac_sgmii_phy_scmi_runtime_disable, dev);
+	if (ret)
+		return ret;
+
+	phy = devm_phy_create(dev, NULL, &qcom_dwmac_sgmii_phy_scmi_ops);
+	if (IS_ERR(phy))
+		return dev_err_probe(dev, PTR_ERR(phy), "failed to create the phy\n");
+
+	phy_set_drvdata(phy, priv);
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(provider))
+		return dev_err_probe(dev, PTR_ERR(provider),
+				     "failed to register the PHY provider\n");
+
+	return 0;
+}
+
+static const struct of_device_id qcom_dwmac_sgmii_phy_scmi_of_match[] = {
+	{ .compatible = "qcom,sa8255p-dwmac-sgmii-phy" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_dwmac_sgmii_phy_scmi_of_match);
+
+static struct platform_driver qcom_dwmac_sgmii_phy_scmi_driver = {
+	.probe	= qcom_dwmac_sgmii_phy_scmi_probe,
+	.driver = {
+		.name = "qcom-dwmac-sgmii-phy-scmi",
+		.of_match_table = qcom_dwmac_sgmii_phy_scmi_of_match,
+	},
+};
+module_platform_driver(qcom_dwmac_sgmii_phy_scmi_driver);
+
+MODULE_DESCRIPTION("Qualcomm DWMAC SGMII PHY driver (firmware managed)");
+MODULE_AUTHOR("Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>");
+MODULE_LICENSE("GPL");

-- 
2.47.3


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH net-next v12 3/7] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Describe the firmware-managed variant of the QCom DesignWare MAC. As the
properties here differ a lot from the HLOS-managed variant, lets put it
in a separate file. Since we need to update the maximum number of power
domains, let's update existing bindings referencing the top-level
snps,dwmac.yaml and limit their maxItems for power-domains to 1.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com> # For RZ/N1
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 .../bindings/net/allwinner,sun7i-a20-gmac.yaml     |   3 +
 .../bindings/net/altr,socfpga-stmmac.yaml          |   3 +
 .../bindings/net/amlogic,meson-dwmac.yaml          |   3 +
 .../devicetree/bindings/net/eswin,eic7700-eth.yaml |   3 +
 .../devicetree/bindings/net/intel,dwmac-plat.yaml  |   3 +
 .../bindings/net/loongson,ls1b-gmac.yaml           |   3 +
 .../bindings/net/loongson,ls1c-emac.yaml           |   3 +
 .../devicetree/bindings/net/nxp,dwmac-imx.yaml     |   3 +
 .../devicetree/bindings/net/nxp,lpc1850-dwmac.yaml |   3 +
 .../devicetree/bindings/net/nxp,s32-dwmac.yaml     |   3 +
 .../devicetree/bindings/net/qcom,ethqos.yaml       |   3 +
 .../bindings/net/qcom,sa8255p-ethqos.yaml          | 107 +++++++++++++++++++++
 .../devicetree/bindings/net/renesas,rzn1-gmac.yaml |   3 +
 .../bindings/net/renesas,rzv2h-gbeth.yaml          |   3 +
 .../devicetree/bindings/net/rockchip-dwmac.yaml    |   3 +
 .../devicetree/bindings/net/snps,dwmac.yaml        |   5 +-
 .../bindings/net/sophgo,cv1800b-dwmac.yaml         |   3 +
 .../bindings/net/sophgo,sg2044-dwmac.yaml          |   3 +
 .../bindings/net/starfive,jh7110-dwmac.yaml        |   3 +
 .../devicetree/bindings/net/stm32-dwmac.yaml       |   3 +
 .../devicetree/bindings/net/tesla,fsd-ethqos.yaml  |   3 +
 .../devicetree/bindings/net/thead,th1520-gmac.yaml |   3 +
 .../bindings/net/toshiba,visconti-dwmac.yaml       |   3 +
 MAINTAINERS                                        |   1 +
 24 files changed, 175 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
index 23e92be33ac8609a16db530782989caed22a5730..b12632545673b2ad0148a677f45a7447309a43cd 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
@@ -40,6 +40,9 @@ properties:
     description:
       PHY regulator
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/altr,socfpga-stmmac.yaml b/Documentation/devicetree/bindings/net/altr,socfpga-stmmac.yaml
index fc445ad5a1f1ac490e921696d6f7ca83d15de459..448e617cddc4cda8dbc77e83324495ffd5dfb9be 100644
--- a/Documentation/devicetree/bindings/net/altr,socfpga-stmmac.yaml
+++ b/Documentation/devicetree/bindings/net/altr,socfpga-stmmac.yaml
@@ -140,6 +140,9 @@ properties:
           - description: offset of the control register
           - description: shift within the control register
 
+  power-domains:
+    maxItems: 1
+
 patternProperties:
   "^mdio[0-9]$":
     type: object
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index 5c91716d1f21e617543b03c5a90b993f8aee053c..9c9cc3ef384da0270489c21b3426572ea46d9499 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -158,6 +158,9 @@ properties:
   interrupt-names:
     const: macirq
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
index 65882ff79d8d7e3227e31415676639dd86f7098f..081a21174fd42bc4925d1850b1147545e111363c 100644
--- a/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
+++ b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
@@ -95,6 +95,9 @@ properties:
           - description: Optional offset of register controlling TXD delay
           - description: Optional offset of register controlling RXD delay
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
index 62c1da36a2b5a29290e5e01be87c48158c4adf89..e41851931b947559c89b0cd6f4756f71046f9594 100644
--- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -47,6 +47,9 @@ properties:
   interrupt-names:
     const: macirq
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - clocks
diff --git a/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml
index c4f3224bad387b87a5b4a3049dabd75f2c4bd42f..c9a131b8d8304c41559a416b324df749c0a87d14 100644
--- a/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml
+++ b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml
@@ -66,6 +66,9 @@ properties:
       - mii
       - rgmii-id
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml
index 99001b940b8361f69bb917617f857ee99f4b3fa5..49db18423dd807683b9bb297978f5da8ea6cee3d 100644
--- a/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml
+++ b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml
@@ -65,6 +65,9 @@ properties:
       - mii
       - rmii
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
index e5db346beca9649be4f97727b78fda8973095912..b240c76e7dd5254d0c3752610c4aa848a3c3d65b 100644
--- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@@ -83,6 +83,9 @@ properties:
     description:
       To select RMII reference clock from external.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - clocks
diff --git a/Documentation/devicetree/bindings/net/nxp,lpc1850-dwmac.yaml b/Documentation/devicetree/bindings/net/nxp,lpc1850-dwmac.yaml
index 05acd9bc7616356e68090ebdd4df20e42f70dd7e..f61188ab0dbe3c0cec5b10f7a65dfaff4dc3898f 100644
--- a/Documentation/devicetree/bindings/net/nxp,lpc1850-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,lpc1850-dwmac.yaml
@@ -51,6 +51,9 @@ properties:
     items:
       - const: stmmaceth
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml b/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml
index 753a04941659b82b655dad1439ff66f8b37fa18b..fcad2274302d9cff36760184b74918a9835906f7 100644
--- a/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml
@@ -81,6 +81,9 @@ properties:
       - const: rx
       - const: ptp_ref
 
+  power-domains:
+    maxItems: 1
+
 required:
   - clocks
   - clock-names
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
index 423959cb928d945aa3e758a3c803d12bd61ec42b..ef520f8105773e22c0536ff419dad55fe316e1bd 100644
--- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
@@ -86,6 +86,9 @@ properties:
   phy-names:
     const: serdes
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - clocks
diff --git a/Documentation/devicetree/bindings/net/qcom,sa8255p-ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,sa8255p-ethqos.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..5158481e5e5b0feed5b3dcd2cda2f593b7ff62e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,sa8255p-ethqos.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,sa8255p-ethqos.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Ethernet ETHQOS device (firmware managed)
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+  dwmac based Qualcomm ethernet devices which support Gigabit
+  ethernet (version v2.3.0 and onwards) with clocks, interconnects, etc.
+  managed by firmware
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    const: qcom,sa8255p-ethqos
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: stmmaceth
+      - const: rgmii
+
+  interrupts:
+    items:
+      - description: Combined signal for various interrupt events
+      - description: The interrupt that occurs when HW safety error triggered
+
+  interrupt-names:
+    items:
+      - const: macirq
+      - const: sfty
+
+  power-domains:
+    minItems: 2
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: core
+      - const: mdio
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: serdes
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg-names
+  - power-domains
+  - power-domain-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet: ethernet@23040000 {
+        compatible = "qcom,sa8255p-ethqos";
+        reg = <0x23040000 0x10000>,
+              <0x23056000 0x100>;
+        reg-names = "stmmaceth", "rgmii";
+
+        iommus = <&apps_smmu 0x120 0x7>;
+
+        interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "macirq", "sfty";
+
+        dma-coherent;
+
+        snps,tso;
+        snps,pbl = <32>;
+        rx-fifo-depth = <16384>;
+        tx-fifo-depth = <16384>;
+
+        phy-handle = <&ethernet_phy>;
+        phy-mode = "2500base-x";
+
+        snps,mtl-rx-config = <&mtl_rx_setup1>;
+        snps,mtl-tx-config = <&mtl_tx_setup1>;
+
+        power-domains = <&scmi8_pd 0>, <&scmi8_pd 1>;
+        power-domain-names = "core", "mdio";
+
+        phys = <&serdes1>;
+        phy-names = "serdes";
+    };
diff --git a/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml b/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml
index 16dd7a2631abf6fb7dc8e0c90755ab1e81915b38..ed0d10a19ca4c47c05f6873c64b0537b90acd15a 100644
--- a/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml
+++ b/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml
@@ -44,6 +44,9 @@ properties:
       phandle pointing to a PCS sub-node compatible with
       renesas,rzn1-miic.yaml#
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
 
diff --git a/Documentation/devicetree/bindings/net/renesas,rzv2h-gbeth.yaml b/Documentation/devicetree/bindings/net/renesas,rzv2h-gbeth.yaml
index 2125b5ddf73dadd8b0d372e83a6b5c4624f5e648..8338834f49cd21df6c697a1f52a8b195c0208c23 100644
--- a/Documentation/devicetree/bindings/net/renesas,rzv2h-gbeth.yaml
+++ b/Documentation/devicetree/bindings/net/renesas,rzv2h-gbeth.yaml
@@ -154,6 +154,9 @@ properties:
       Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml#
       (Refer RZ/T2H portion in the DT-binding file)
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
index 80c252845349c4533deff85b052157984d0e2f23..3ec3f6dc2a125908ba98f20b1120311de8967954 100644
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
@@ -123,6 +123,9 @@ properties:
   phy-supply:
     description: PHY regulator
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - clocks
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 2449311c6d28ed3fbf8c92526ce8b872900653f4..d3aff1df3070d1b22198766ee2e0131dcf925287 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -72,6 +72,7 @@ properties:
         - nuvoton,ma35d1-dwmac
         - nxp,s32g2-dwmac
         - qcom,qcs404-ethqos
+        - qcom,sa8255p-ethqos
         - qcom,sa8775p-ethqos
         - qcom,sc8280xp-ethqos
         - qcom,sm8150-ethqos
@@ -185,7 +186,8 @@ properties:
           - const: ahb
 
   power-domains:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   mac-mode:
     $ref: ethernet-controller.yaml#/properties/phy-connection-type
@@ -630,6 +632,7 @@ allOf:
                 - ingenic,x1830-mac
                 - ingenic,x2000-mac
                 - qcom,qcs404-ethqos
+                - qcom,sa8255p-ethqos
                 - qcom,sa8775p-ethqos
                 - qcom,sc8280xp-ethqos
                 - qcom,sm8150-ethqos
diff --git a/Documentation/devicetree/bindings/net/sophgo,cv1800b-dwmac.yaml b/Documentation/devicetree/bindings/net/sophgo,cv1800b-dwmac.yaml
index b89456f0ef830991135bd17626da98661429596c..e78cbf594c695204040a53ab1e367daa9e12246b 100644
--- a/Documentation/devicetree/bindings/net/sophgo,cv1800b-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/sophgo,cv1800b-dwmac.yaml
@@ -49,6 +49,9 @@ properties:
   reset-names:
     const: stmmaceth
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml b/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml
index e8d3814db0e94fdcd0f3ab2a9fa8bab972a97ab5..845e2c67d20037496bb1eec6eb73c99cde74e944 100644
--- a/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml
@@ -52,6 +52,9 @@ properties:
   interrupt-names:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
   resets:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
index fdcc61c65f87d1dc15a17b9486cde032ffa7798b..c424e77973921e1f9f18135c3106f1c270c9ac87 100644
--- a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
@@ -75,6 +75,9 @@ properties:
       The argument one is the offset of phy mode selection, the
       argument two is the shift of phy mode selection.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index 987254900d0da7aab81237f20b1540ad8a17bd21..29b878079ff0c1a0ef95fc63f2035f478ee039b2 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -121,6 +121,9 @@ properties:
     minItems: 1
     maxItems: 2
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - clocks
diff --git a/Documentation/devicetree/bindings/net/tesla,fsd-ethqos.yaml b/Documentation/devicetree/bindings/net/tesla,fsd-ethqos.yaml
index dd7481bb16e59982c26c1a54ae82b8cff85fdfe0..ad635529d676ed6b752ab3bde5152d5cbddcb519 100644
--- a/Documentation/devicetree/bindings/net/tesla,fsd-ethqos.yaml
+++ b/Documentation/devicetree/bindings/net/tesla,fsd-ethqos.yaml
@@ -67,6 +67,9 @@ properties:
       - rgmii-rxid
       - rgmii-txid
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml b/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
index b3492a9aa4effa73fadf92a63a76ba8bb65a8769..c859f8bb5d582af8b8782f2f89ab5e6ee3d7a46c 100644
--- a/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
+++ b/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
@@ -78,6 +78,9 @@ properties:
     items:
       - const: macirq
 
+  power-domains:
+    maxItems: 1
+
 required:
   - clocks
   - clock-names
diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
index f0f32e18fc8550e6f63b87b60a095972453836c9..efa39eab0256a1102b01872bd848749788c9b4e8 100644
--- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
@@ -48,6 +48,9 @@ properties:
   interrupt-names:
     const: macirq
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/MAINTAINERS b/MAINTAINERS
index 4a8b0fd665ce2447c3e89784b142d998f7384b95..7d5877528df099d546929bc145ee9e7233391105 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22184,6 +22184,7 @@ L:	netdev@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/qcom,ethqos.yaml
+F:	Documentation/devicetree/bindings/net/qcom,sa8255p-ethqos.yaml
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
 
 QUALCOMM FASTRPC DRIVER

-- 
2.47.3


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH net-next v12 4/7] net: stmmac: qcom-ethqos: set serdes mode before powerup

[Bartosz Golaszewski]

Call phy_set_mode_ext() before phy_power_on() in
qcom_ethqos_serdes_powerup(). This is harmless for existing users but on
SCMI systems this is required for the PHY driver to select the right
performance level - which translates to the link speed. This is done
ahead of adding support for the firmware-managed EMAC on Qualcomm sa8255p.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index ac7d6d3e205a1ab5b391def879d6f1033a0961b6..47b70b5e706f221c01f1c0ae3b1acafae6641165 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -601,10 +601,19 @@ static int qcom_ethqos_serdes_powerup(struct net_device *ndev, void *priv)
 	if (ret)
 		return ret;
 
+	ret = phy_set_mode_ext(ethqos->serdes_phy, PHY_MODE_ETHERNET,
+			       ethqos->phy_mode);
+	if (ret)
+		goto err_out;
+
 	ret = phy_power_on(ethqos->serdes_phy);
 	if (ret)
-		phy_exit(ethqos->serdes_phy);
+		goto err_out;
 
+	return 0;
+
+err_out:
+	phy_exit(ethqos->serdes_phy);
 	return ret;
 }
 

-- 
2.47.3


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH net-next v12 5/7] net: stmmac: qcom-ethqos: reuse the address of ethqos_emac_driver_data

[Bartosz Golaszewski]

Instead of needlessly copying the fields of ethqos_emac_driver_data into
struct qcom_ethqos, just use the address of the former as a reference.
It's .rodata after all. This is done in order to avoid having either two
calls to of_device_get_match_data() or having to extend the latter with
another field when adding support for SCMI.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 37 ++++++++--------------
 1 file changed, 14 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 47b70b5e706f221c01f1c0ae3b1acafae6641165..fa3447b90315672d706d5ce7d710bdec6214e4e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -103,12 +103,7 @@ struct qcom_ethqos {
 	struct clk *link_clk;
 	struct phy *serdes_phy;
 	phy_interface_t phy_mode;
-
-	const struct ethqos_emac_por *rgmii_por;
-	unsigned int num_rgmii_por;
-	bool rgmii_config_loopback_en;
-	bool has_emac_ge_3;
-	bool needs_sgmii_loopback;
+	const struct ethqos_emac_driver_data *data;
 };
 
 static u32 rgmii_readl(struct qcom_ethqos *ethqos, unsigned int offset)
@@ -189,7 +184,7 @@ static int ethqos_set_clk_tx_rate(void *bsp_priv, struct clk *clk_tx_i,
 static void
 qcom_ethqos_set_sgmii_loopback(struct qcom_ethqos *ethqos, bool enable)
 {
-	if (!ethqos->needs_sgmii_loopback ||
+	if (!ethqos->data->needs_sgmii_loopback ||
 	    ethqos->phy_mode != PHY_INTERFACE_MODE_2500BASEX)
 		return;
 
@@ -322,7 +317,7 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 	/* Set DLL_EN */
 	rgmii_setmask(ethqos, SDCC_DLL_CONFIG_DLL_EN, SDCC_HC_REG_DLL_CONFIG);
 
-	if (!ethqos->has_emac_ge_3) {
+	if (!ethqos->data->has_emac_ge_3) {
 		rgmii_clrmask(ethqos, SDCC_DLL_MCLK_GATING_EN,
 			      SDCC_HC_REG_DLL_CONFIG);
 
@@ -352,7 +347,7 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 	rgmii_setmask(ethqos, SDCC_DLL_CONFIG2_DDR_CAL_EN,
 		      SDCC_HC_REG_DLL_CONFIG2);
 
-	if (!ethqos->has_emac_ge_3) {
+	if (!ethqos->data->has_emac_ge_3) {
 		rgmii_clrmask(ethqos, SDCC_DLL_CONFIG2_DLL_CLOCK_DIS,
 			      SDCC_HC_REG_DLL_CONFIG2);
 
@@ -432,7 +427,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 	rgmii_clrmask(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
 		      RGMII_IO_MACRO_CONFIG2);
 
-	if (speed == SPEED_1000 || ethqos->has_emac_ge_3)
+	if (speed == SPEED_1000 || ethqos->data->has_emac_ge_3)
 		rgmii_setmask(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
 			      RGMII_IO_MACRO_CONFIG2);
 	else
@@ -456,7 +451,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		 * in practice this becomes PRG_RCLK_DLY = 52 * 4 /
 		 *  (2 * RX delay ns)
 		 */
-		if (ethqos->has_emac_ge_3) {
+		if (ethqos->data->has_emac_ge_3) {
 			/* 0.9 ns */
 			prg_rclk_dly = 115;
 		} else {
@@ -472,7 +467,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 			      SDCC_HC_REG_DDR_CONFIG);
 	}
 
-	if (ethqos->rgmii_config_loopback_en)
+	if (ethqos->data->rgmii_config_loopback_en)
 		loopback = RGMII_CONFIG_LOOPBACK_EN;
 	else
 		loopback = 0;
@@ -495,9 +490,9 @@ static void ethqos_fix_mac_speed_rgmii(void *bsp_priv,
 	dev = &ethqos->pdev->dev;
 
 	/* Reset to POR values and enable clk */
-	for (i = 0; i < ethqos->num_rgmii_por; i++)
-		rgmii_writel(ethqos, ethqos->rgmii_por[i].value,
-			     ethqos->rgmii_por[i].offset);
+	for (i = 0; i < ethqos->data->num_rgmii_por; i++)
+		rgmii_writel(ethqos, ethqos->data->rgmii_por[i].value,
+			     ethqos->data->rgmii_por[i].offset);
 
 	ethqos_set_func_clk_en(ethqos);
 
@@ -511,7 +506,7 @@ static void ethqos_fix_mac_speed_rgmii(void *bsp_priv,
 	rgmii_setmask(ethqos, SDCC_DLL_CONFIG_PDN,
 		      SDCC_HC_REG_DLL_CONFIG);
 
-	if (ethqos->has_emac_ge_3) {
+	if (ethqos->data->has_emac_ge_3) {
 		if (speed == SPEED_1000) {
 			rgmii_writel(ethqos, 0x1800000, SDCC_TEST_CTL);
 			rgmii_writel(ethqos, 0x2C010800, SDCC_USR_CTL);
@@ -538,7 +533,7 @@ static void ethqos_fix_mac_speed_rgmii(void *bsp_priv,
 			      SDCC_HC_REG_DLL_CONFIG);
 
 		/* Set USR_CTL bit 26 with mask of 3 bits */
-		if (!ethqos->has_emac_ge_3)
+		if (!ethqos->data->has_emac_ge_3)
 			rgmii_updatel(ethqos, GENMASK(26, 24), BIT(26),
 				      SDCC_USR_CTL);
 
@@ -743,11 +738,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 				     "Failed to map rgmii resource\n");
 
 	data = of_device_get_match_data(dev);
-	ethqos->rgmii_por = data->rgmii_por;
-	ethqos->num_rgmii_por = data->num_rgmii_por;
-	ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en;
-	ethqos->has_emac_ge_3 = data->has_emac_ge_3;
-	ethqos->needs_sgmii_loopback = data->needs_sgmii_loopback;
+	ethqos->data = data;
 
 	ethqos->link_clk = devm_clk_get(dev, data->link_clk_name ?: "rgmii");
 	if (IS_ERR(ethqos->link_clk))
@@ -784,7 +775,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	plat_dat->dump_debug_regs = rgmii_dump;
 	plat_dat->ptp_clk_freq_config = ethqos_ptp_clk_freq_config;
 	plat_dat->core_type = DWMAC_CORE_GMAC4;
-	if (ethqos->has_emac_ge_3)
+	if (data->has_emac_ge_3)
 		plat_dat->dwmac4_addrs = &data->dwmac4_addrs;
 	plat_dat->pmt = true;
 	if (of_property_read_bool(np, "snps,tso"))

-- 
2.47.3


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH net-next v12 6/7] net: stmmac: qcom-ethqos: factor out linux-level setup into a separate function

[Bartosz Golaszewski]

Ahead of adding support for firmware-controlled EMAC variants, extend
the ethqos_emac_driver_data structure with a setup() callback, implement
it for the existing models and move all operations not required in SCMI
mode into it.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 99 +++++++++++++++-------
 1 file changed, 68 insertions(+), 31 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index fa3447b90315672d706d5ce7d710bdec6214e4e6..f379570f80680e96f027873cda6a6bca398e22dc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -5,6 +5,7 @@
 #include <linux/of.h>
 #include <linux/of_net.h>
 #include <linux/platform_device.h>
+#include <linux/pm_domain.h>
 #include <linux/phy.h>
 #include <linux/phy/phy.h>
 
@@ -81,6 +82,8 @@
 
 #define SGMII_10M_RX_CLK_DVDR			0x31
 
+struct qcom_ethqos;
+
 struct ethqos_emac_por {
 	unsigned int offset;
 	unsigned int value;
@@ -95,6 +98,8 @@ struct ethqos_emac_driver_data {
 	const char *link_clk_name;
 	struct dwmac4_addrs dwmac4_addrs;
 	bool needs_sgmii_loopback;
+	int (*setup)(struct qcom_ethqos *ethqos,
+		     struct plat_stmmacenet_data *plat_dat);
 };
 
 struct qcom_ethqos {
@@ -199,6 +204,9 @@ static void ethqos_set_func_clk_en(struct qcom_ethqos *ethqos)
 	rgmii_setmask(ethqos, RGMII_CONFIG_FUNC_CLK_EN, RGMII_IO_MACRO_CONFIG);
 }
 
+static int ethqos_hlos_setup(struct qcom_ethqos *ethqos,
+			     struct plat_stmmacenet_data *plat_dat);
+
 static const struct ethqos_emac_por emac_v2_3_0_por[] = {
 	{ .offset = RGMII_IO_MACRO_CONFIG,	.value = 0x00C01343 },
 	{ .offset = SDCC_HC_REG_DLL_CONFIG,	.value = 0x2004642C },
@@ -213,6 +221,7 @@ static const struct ethqos_emac_driver_data emac_v2_3_0_data = {
 	.num_rgmii_por = ARRAY_SIZE(emac_v2_3_0_por),
 	.rgmii_config_loopback_en = true,
 	.has_emac_ge_3 = false,
+	.setup = ethqos_hlos_setup,
 };
 
 static const struct ethqos_emac_por emac_v2_1_0_por[] = {
@@ -229,6 +238,7 @@ static const struct ethqos_emac_driver_data emac_v2_1_0_data = {
 	.num_rgmii_por = ARRAY_SIZE(emac_v2_1_0_por),
 	.rgmii_config_loopback_en = false,
 	.has_emac_ge_3 = false,
+	.setup = ethqos_hlos_setup,
 };
 
 static const struct ethqos_emac_por emac_v3_0_0_por[] = {
@@ -261,6 +271,7 @@ static const struct ethqos_emac_driver_data emac_v3_0_0_data = {
 		.mtl_low_cred = 0x00008024,
 		.mtl_low_cred_offset = 0x1000,
 	},
+	.setup = ethqos_hlos_setup,
 };
 
 static const struct ethqos_emac_por emac_v4_0_0_por[] = {
@@ -296,6 +307,7 @@ static const struct ethqos_emac_driver_data emac_v4_0_0_data = {
 		.mtl_low_cred = 0x00008024,
 		.mtl_low_cred_offset = 0x1000,
 	},
+	.setup = ethqos_hlos_setup,
 };
 
 static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
@@ -685,6 +697,58 @@ static void ethqos_ptp_clk_freq_config(struct stmmac_priv *priv)
 	netdev_dbg(priv->dev, "PTP rate %lu\n", plat_dat->clk_ptp_rate);
 }
 
+static int ethqos_hlos_setup(struct qcom_ethqos *ethqos,
+			     struct plat_stmmacenet_data *plat_dat)
+{
+	struct platform_device *pdev = ethqos->pdev;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ethqos->rgmii_base = devm_platform_ioremap_resource_byname(pdev, "rgmii");
+	if (IS_ERR(ethqos->rgmii_base))
+		return dev_err_probe(dev, PTR_ERR(ethqos->rgmii_base),
+				     "Failed to map rgmii resource\n");
+
+	ethqos->link_clk = devm_clk_get(dev, ethqos->data->link_clk_name ?: "rgmii");
+	if (IS_ERR(ethqos->link_clk))
+		return dev_err_probe(dev, PTR_ERR(ethqos->link_clk),
+				     "Failed to get link_clk\n");
+
+	plat_dat->clks_config = ethqos_clks_config;
+
+	ret = ethqos_clks_config(ethqos, true);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, ethqos_clks_disable, ethqos);
+	if (ret)
+		return ret;
+
+	ethqos_set_clk_tx_rate(ethqos, NULL, plat_dat->phy_interface, SPEED_1000);
+	qcom_ethqos_set_sgmii_loopback(ethqos, true);
+	ethqos_set_func_clk_en(ethqos);
+
+	switch (ethqos->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		plat_dat->fix_mac_speed = ethqos_fix_mac_speed_rgmii;
+		break;
+	case PHY_INTERFACE_MODE_2500BASEX:
+	case PHY_INTERFACE_MODE_SGMII:
+		plat_dat->fix_mac_speed = ethqos_fix_mac_speed_sgmii;
+		break;
+	default:
+		break;
+	}
+
+	plat_dat->set_clk_tx_rate = ethqos_set_clk_tx_rate;
+	plat_dat->dump_debug_regs = rgmii_dump;
+
+	return 0;
+}
+
 static int qcom_ethqos_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -706,23 +770,20 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 				     "dt configuration failed\n");
 	}
 
-	plat_dat->clks_config = ethqos_clks_config;
-
 	ethqos = devm_kzalloc(dev, sizeof(*ethqos), GFP_KERNEL);
 	if (!ethqos)
 		return -ENOMEM;
 
 	ethqos->phy_mode = plat_dat->phy_interface;
+
 	switch (ethqos->phy_mode) {
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII_RXID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
-		plat_dat->fix_mac_speed = ethqos_fix_mac_speed_rgmii;
 		break;
 	case PHY_INTERFACE_MODE_2500BASEX:
 	case PHY_INTERFACE_MODE_SGMII:
-		plat_dat->fix_mac_speed = ethqos_fix_mac_speed_sgmii;
 		plat_dat->mac_finish = ethqos_mac_finish_serdes;
 		break;
 	default:
@@ -732,24 +793,13 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	}
 
 	ethqos->pdev = pdev;
-	ethqos->rgmii_base = devm_platform_ioremap_resource_byname(pdev, "rgmii");
-	if (IS_ERR(ethqos->rgmii_base))
-		return dev_err_probe(dev, PTR_ERR(ethqos->rgmii_base),
-				     "Failed to map rgmii resource\n");
-
 	data = of_device_get_match_data(dev);
 	ethqos->data = data;
 
-	ethqos->link_clk = devm_clk_get(dev, data->link_clk_name ?: "rgmii");
-	if (IS_ERR(ethqos->link_clk))
-		return dev_err_probe(dev, PTR_ERR(ethqos->link_clk),
-				     "Failed to get link_clk\n");
-
-	ret = ethqos_clks_config(ethqos, true);
-	if (ret)
-		return ret;
+	if (WARN_ON(!data->setup))
+		return -EINVAL;
 
-	ret = devm_add_action_or_reset(dev, ethqos_clks_disable, ethqos);
+	ret = data->setup(ethqos, plat_dat);
 	if (ret)
 		return ret;
 
@@ -758,21 +808,8 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(ethqos->serdes_phy),
 				     "Failed to get serdes phy\n");
 
-	ethqos_set_clk_tx_rate(ethqos, NULL, plat_dat->phy_interface,
-			       SPEED_1000);
-
-	qcom_ethqos_set_sgmii_loopback(ethqos, true);
-	ethqos_set_func_clk_en(ethqos);
-
-	/* The clocks are controlled by firmware, so we don't know for certain
-	 * what clock rate is being used. Hardware documentation mentions that
-	 * the AHB slave clock will be in the range of 50 to 100MHz, which
-	 * equates to a MDC between 1.19 and 2.38MHz.
-	 */
 	plat_dat->clk_csr = STMMAC_CSR_60_100M;
 	plat_dat->bsp_priv = ethqos;
-	plat_dat->set_clk_tx_rate = ethqos_set_clk_tx_rate;
-	plat_dat->dump_debug_regs = rgmii_dump;
 	plat_dat->ptp_clk_freq_config = ethqos_ptp_clk_freq_config;
 	plat_dat->core_type = DWMAC_CORE_GMAC4;
 	if (data->has_emac_ge_3)

-- 
2.47.3


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH net-next v12 7/7] net: stmmac: qcom-ethqos: add support for sa8255p

[Bartosz Golaszewski]

Extend the driver to support a new model - sa8255p. Unlike the previously
supported variants, this one's power management is done in the firmware
over SCMI. This is modeled in linux using power domains so add a new
emac data variant and a separate setup callback.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 83 ++++++++++++++++++++++
 1 file changed, 83 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index f379570f80680e96f027873cda6a6bca398e22dc..47175670a32631369a2cf8b00388d9359513e090 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -108,6 +108,7 @@ struct qcom_ethqos {
 	struct clk *link_clk;
 	struct phy *serdes_phy;
 	phy_interface_t phy_mode;
+	struct dev_pm_domain_list *pds;
 	const struct ethqos_emac_driver_data *data;
 };
 
@@ -206,6 +207,8 @@ static void ethqos_set_func_clk_en(struct qcom_ethqos *ethqos)
 
 static int ethqos_hlos_setup(struct qcom_ethqos *ethqos,
 			     struct plat_stmmacenet_data *plat_dat);
+static int ethqos_scmi_setup(struct qcom_ethqos *ethqos,
+			     struct plat_stmmacenet_data *plat_dat);
 
 static const struct ethqos_emac_por emac_v2_3_0_por[] = {
 	{ .offset = RGMII_IO_MACRO_CONFIG,	.value = 0x00C01343 },
@@ -310,6 +313,29 @@ static const struct ethqos_emac_driver_data emac_v4_0_0_data = {
 	.setup = ethqos_hlos_setup,
 };
 
+static const struct ethqos_emac_driver_data emac_v4_0_0_scmi_data = {
+	.has_emac_ge_3 = true,
+	.needs_sgmii_loopback = true,
+	.dma_addr_width = 36,
+	.dwmac4_addrs = {
+		.dma_chan = 0x00008100,
+		.dma_chan_offset = 0x1000,
+		.mtl_chan = 0x00008000,
+		.mtl_chan_offset = 0x1000,
+		.mtl_ets_ctrl = 0x00008010,
+		.mtl_ets_ctrl_offset = 0x1000,
+		.mtl_txq_weight = 0x00008018,
+		.mtl_txq_weight_offset = 0x1000,
+		.mtl_send_slp_cred = 0x0000801c,
+		.mtl_send_slp_cred_offset = 0x1000,
+		.mtl_high_cred = 0x00008020,
+		.mtl_high_cred_offset = 0x1000,
+		.mtl_low_cred = 0x00008024,
+		.mtl_low_cred_offset = 0x1000,
+	},
+	.setup = ethqos_scmi_setup,
+};
+
 static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 {
 	struct device *dev = &ethqos->pdev->dev;
@@ -749,6 +775,62 @@ static int ethqos_hlos_setup(struct qcom_ethqos *ethqos,
 	return 0;
 }
 
+static const char *const ethqos_scmi_pd_names[] = { "core", "mdio" };
+
+static int ethqos_scmi_setup(struct qcom_ethqos *ethqos,
+			     struct plat_stmmacenet_data *plat_dat)
+{
+	const struct dev_pm_domain_attach_data pd_data = {
+		.pd_names	= ethqos_scmi_pd_names,
+		.num_pd_names	= ARRAY_SIZE(ethqos_scmi_pd_names),
+		.pd_flags	= PD_FLAG_DEV_LINK_ON,
+	};
+
+	struct platform_device *pdev = ethqos->pdev;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = devm_pm_domain_attach_list(dev, &pd_data, &ethqos->pds);
+	if (ret < 0)
+		return dev_err_probe(dev, ret,
+				     "Failed to attach power domains\n");
+
+	/*
+	 * The SerDes lane, its clocks and the MAC AXI/AHB clocks are owned by
+	 * firmware and brought up through the SCMI power domains above. The
+	 * MAC wrapper itself, however is in the kernel's register space: the
+	 * mux that feeds the SerDes recovered RX clock into the MAC's clk_rx_i
+	 * is not configured by firmware. Without it, clk_rx_i never toggles
+	 * and the DMA SW-reset polled in dwmac4_dma_reset() never completes.
+	 *
+	 * Map the wrapper and program the same loopback/functional clock bits
+	 * the non-firmware platforms rely on (see ethqos_clks_config) so the
+	 * RX clock is present by the time the DMA engine is reset.
+	 */
+	ethqos->rgmii_base = devm_platform_ioremap_resource_byname(pdev, "rgmii");
+	if (IS_ERR(ethqos->rgmii_base))
+		return dev_err_probe(dev, PTR_ERR(ethqos->rgmii_base),
+				     "Failed to map rgmii resource\n");
+
+	/*
+	 * Run on every runtime resume, which stmmac performs after the power
+	 * domains are on but before serdes_powerup() and the DMA reset, so the
+	 * wrapper is always configured ahead of the reset.
+	 */
+	plat_dat->clks_config = ethqos_clks_config;
+
+	switch (ethqos->phy_mode) {
+	case PHY_INTERFACE_MODE_2500BASEX:
+	case PHY_INTERFACE_MODE_SGMII:
+		plat_dat->fix_mac_speed = ethqos_fix_mac_speed_sgmii;
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
 static int qcom_ethqos_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -836,6 +918,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 
 static const struct of_device_id qcom_ethqos_match[] = {
 	{ .compatible = "qcom,qcs404-ethqos", .data = &emac_v2_3_0_data},
+	{ .compatible = "qcom,sa8255p-ethqos", .data = &emac_v4_0_0_scmi_data},
 	{ .compatible = "qcom,sa8775p-ethqos", .data = &emac_v4_0_0_data},
 	{ .compatible = "qcom,sc8280xp-ethqos", .data = &emac_v3_0_0_data},
 	{ .compatible = "qcom,sm8150-ethqos", .data = &emac_v2_1_0_data},

-- 
2.47.3


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH net-next v12 2/7] phy: qcom: add the SGMII SerDes PHY driver for SCMI systems

[Uwe Kleine-König]

[-- Attachment #1.1: Type: text/plain, Size: 255 bytes --]

On Mon, Jul 06, 2026 at 03:20:17PM +0200, Bartosz Golaszewski wrote:
> +#include <linux/mod_devicetable.h>

Please only include those <linux/device-id/*.h> that you actually need.
I'm actively working on deprecating <linux/mod_devicetable.h>.

Thanks
Uwe

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 161 bytes --]

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH net-next v12 0/7] net: stmmac: qcom-ethqos: add support for SCMI power domains

[Bartosz Golaszewski]

On Mon, 6 Jul 2026 15:20:15 +0200, Bartosz Golaszewski
<bartosz.golaszewski@oss.qualcomm.com> said:
> Add support for the firmware-managed variant of the DesignWare MAC on
> the sa8255p platform. This series contains new DT bindings and driver
> changes required to support the MAC in the STMMAC driver.
>
> It also reorganizes the ethqos code quite a bit to make the introduction
> of power domains into the driver a bit easier on the eye.
>
> The DTS changes will go in separately.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
> ---

There's one more comment to address by Uwe so there'll be a v13. For merging
strategy: there are no build-time dependencies between the PHY and MAC parts.
Vinod, Jakub: do you prefer me to split the series next time into its PHY and
MAC parts for integration?

Bart

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv