[PATCH fixes] riscv: Properly export reserved regions in /proc/iomem

[PATCH fixes] riscv: Properly export reserved regions in /proc/iomem

[Björn Töpel]

From: Björn Töpel <bjorn@rivosinc.com>

The /proc/iomem represents the kernel's memory map. Regions marked
with "Reserved" tells the user that the range should not be tampered
with. Kexec-tools, when using the older kexec_load syscall relies on
the "Reserved" regions to build the memory segments, that will be the
target of the new kexec'd kernel.

The RISC-V port tries to expose all reserved regions to userland, but
some regions were not properly exposed: Regions that resided in both
the "regular" and reserved memory block, e.g. the EFI Memory Map. A
missing entry could result in reserved memory being overwritten.

It turns out, that arm64, and loongarch had a similar issue a while
back:

  commit d91680e687f4 ("arm64: Fix /proc/iomem for reserved but not memory regions")
  commit 50d7ba36b916 ("arm64: export memblock_reserve()d regions via /proc/iomem")

Similar to the other ports, resolve the issue by splitting the regions
in an arch initcall, since we need a working allocator.

Fixes: ffe0e5261268 ("RISC-V: Improve init_resources()")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
---
 arch/riscv/kernel/setup.c | 36 +++++++++++++++++++++++++++++++++++-
 1 file changed, 35 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index c174544eefc8..f7c9a1caa83e 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -66,6 +66,9 @@ static struct resource bss_res = { .name = "Kernel bss", };
 static struct resource elfcorehdr_res = { .name = "ELF Core hdr", };
 #endif
 
+static int num_standard_resources;
+static struct resource *standard_resources;
+
 static int __init add_resource(struct resource *parent,
 				struct resource *res)
 {
@@ -139,7 +142,7 @@ static void __init init_resources(void)
 	struct resource *res = NULL;
 	struct resource *mem_res = NULL;
 	size_t mem_res_sz = 0;
-	int num_resources = 0, res_idx = 0;
+	int num_resources = 0, res_idx = 0, non_resv_res = 0;
 	int ret = 0;
 
 	/* + 1 as memblock_alloc() might increase memblock.reserved.cnt */
@@ -193,6 +196,7 @@ static void __init init_resources(void)
 	/* Add /memory regions to the resource tree */
 	for_each_mem_region(region) {
 		res = &mem_res[res_idx--];
+		non_resv_res++;
 
 		if (unlikely(memblock_is_nomap(region))) {
 			res->name = "Reserved";
@@ -210,6 +214,9 @@ static void __init init_resources(void)
 			goto error;
 	}
 
+	num_standard_resources = non_resv_res;
+	standard_resources = &mem_res[res_idx + 1];
+
 	/* Clean-up any unused pre-allocated resources */
 	if (res_idx >= 0)
 		memblock_free(mem_res, (res_idx + 1) * sizeof(*mem_res));
@@ -221,6 +228,33 @@ static void __init init_resources(void)
 	memblock_free(mem_res, mem_res_sz);
 }
 
+static int __init reserve_memblock_reserved_regions(void)
+{
+	u64 i, j;
+
+	for (i = 0; i < num_standard_resources; i++) {
+		struct resource *mem = &standard_resources[i];
+		phys_addr_t r_start, r_end, mem_size = resource_size(mem);
+
+		if (!memblock_is_region_reserved(mem->start, mem_size))
+			continue;
+
+		for_each_reserved_mem_range(j, &r_start, &r_end) {
+			resource_size_t start, end;
+
+			start = max(PFN_PHYS(PFN_DOWN(r_start)), mem->start);
+			end = min(PFN_PHYS(PFN_UP(r_end)) - 1, mem->end);
+
+			if (start > mem->end || end < mem->start)
+				continue;
+
+			reserve_region_with_split(mem, start, end, "Reserved");
+		}
+	}
+
+	return 0;
+}
+arch_initcall(reserve_memblock_reserved_regions);
 
 static void __init parse_dtb(void)
 {

base-commit: a24588245776dafc227243a01bfbeb8a59bafba9
-- 
2.45.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH fixes] riscv: Properly export reserved regions in /proc/iomem

[Alexandre Ghiti]

Hi Bjorn,

On 09/04/2025 20:21, Björn Töpel wrote:
> From: Björn Töpel <bjorn@rivosinc.com>
>
> The /proc/iomem represents the kernel's memory map. Regions marked
> with "Reserved" tells the user that the range should not be tampered
> with. Kexec-tools, when using the older kexec_load syscall relies on
> the "Reserved" regions to build the memory segments, that will be the
> target of the new kexec'd kernel.
>
> The RISC-V port tries to expose all reserved regions to userland, but
> some regions were not properly exposed: Regions that resided in both
> the "regular" and reserved memory block, e.g. the EFI Memory Map. A
> missing entry could result in reserved memory being overwritten.
>
> It turns out, that arm64, and loongarch had a similar issue a while
> back:
>
>    commit d91680e687f4 ("arm64: Fix /proc/iomem for reserved but not memory regions")
>    commit 50d7ba36b916 ("arm64: export memblock_reserve()d regions via /proc/iomem")
>
> Similar to the other ports, resolve the issue by splitting the regions
> in an arch initcall, since we need a working allocator.
>
> Fixes: ffe0e5261268 ("RISC-V: Improve init_resources()")
> Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
> ---
>   arch/riscv/kernel/setup.c | 36 +++++++++++++++++++++++++++++++++++-
>   1 file changed, 35 insertions(+), 1 deletion(-)
>
> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> index c174544eefc8..f7c9a1caa83e 100644
> --- a/arch/riscv/kernel/setup.c
> +++ b/arch/riscv/kernel/setup.c
> @@ -66,6 +66,9 @@ static struct resource bss_res = { .name = "Kernel bss", };
>   static struct resource elfcorehdr_res = { .name = "ELF Core hdr", };
>   #endif
>   
> +static int num_standard_resources;
> +static struct resource *standard_resources;
> +
>   static int __init add_resource(struct resource *parent,
>   				struct resource *res)
>   {
> @@ -139,7 +142,7 @@ static void __init init_resources(void)
>   	struct resource *res = NULL;
>   	struct resource *mem_res = NULL;
>   	size_t mem_res_sz = 0;
> -	int num_resources = 0, res_idx = 0;
> +	int num_resources = 0, res_idx = 0, non_resv_res = 0;
>   	int ret = 0;
>   
>   	/* + 1 as memblock_alloc() might increase memblock.reserved.cnt */
> @@ -193,6 +196,7 @@ static void __init init_resources(void)
>   	/* Add /memory regions to the resource tree */
>   	for_each_mem_region(region) {
>   		res = &mem_res[res_idx--];
> +		non_resv_res++;
>   
>   		if (unlikely(memblock_is_nomap(region))) {
>   			res->name = "Reserved";
> @@ -210,6 +214,9 @@ static void __init init_resources(void)
>   			goto error;
>   	}
>   
> +	num_standard_resources = non_resv_res;
> +	standard_resources = &mem_res[res_idx + 1];
> +
>   	/* Clean-up any unused pre-allocated resources */
>   	if (res_idx >= 0)
>   		memblock_free(mem_res, (res_idx + 1) * sizeof(*mem_res));
> @@ -221,6 +228,33 @@ static void __init init_resources(void)
>   	memblock_free(mem_res, mem_res_sz);
>   }
>   
> +static int __init reserve_memblock_reserved_regions(void)
> +{
> +	u64 i, j;
> +
> +	for (i = 0; i < num_standard_resources; i++) {
> +		struct resource *mem = &standard_resources[i];
> +		phys_addr_t r_start, r_end, mem_size = resource_size(mem);
> +
> +		if (!memblock_is_region_reserved(mem->start, mem_size))
> +			continue;
> +
> +		for_each_reserved_mem_range(j, &r_start, &r_end) {
> +			resource_size_t start, end;
> +
> +			start = max(PFN_PHYS(PFN_DOWN(r_start)), mem->start);
> +			end = min(PFN_PHYS(PFN_UP(r_end)) - 1, mem->end);
> +
> +			if (start > mem->end || end < mem->start)
> +				continue;
> +
> +			reserve_region_with_split(mem, start, end, "Reserved");
> +		}
> +	}
> +
> +	return 0;
> +}
> +arch_initcall(reserve_memblock_reserved_regions);
>   
>   static void __init parse_dtb(void)
>   {
>
> base-commit: a24588245776dafc227243a01bfbeb8a59bafba9


Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>

It will be merged with other fixes in the next rc-ish!

Thanks,

Alex


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH fixes] riscv: Properly export reserved regions in /proc/iomem

[patchwork-bot+linux-riscv]

Hello:

This patch was applied to riscv/linux.git (fixes)
by Alexandre Ghiti <alexghiti@rivosinc.com>:

On Wed,  9 Apr 2025 20:21:27 +0200 you wrote:
> From: Björn Töpel <bjorn@rivosinc.com>
> 
> The /proc/iomem represents the kernel's memory map. Regions marked
> with "Reserved" tells the user that the range should not be tampered
> with. Kexec-tools, when using the older kexec_load syscall relies on
> the "Reserved" regions to build the memory segments, that will be the
> target of the new kexec'd kernel.
> 
> [...]

Here is the summary with links:
  - [fixes] riscv: Properly export reserved regions in /proc/iomem
    https://git.kernel.org/riscv/c/e94eb7ea6f20

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html



_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 0/1] Fix for riscv vmcore issue

[Pnina Feder]

We are creating a vmcore using kexec on a Linux 6.15 RISC-V system and analyzing it with the crash tool on the host.
This workflow used to work on Linux 6.14 but is now broken in 6.15.

The issue is caused by a change in the kernel:
In Linux 6.15, certain memblock sections are now marked as Reserved in /proc/iomem.
The kexec tool excludes all Reserved regions when generating the vmcore, so these sections are missing from the dump.

However, the kernel still uses addresses in these regions—for example, for IRQ pointers.
Since the crash tool needs access to these memory areas to function correctly, their exclusion breaks the analysis.


Pnina Feder (1):
  riscv: Change memblock reserved name to be recognized on kexec

 arch/riscv/kernel/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

-- 
2.43.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 0/1] Fix for riscv vmcore issue

[Björn Töpel]

Pnina!

Pnina Feder <pnina.feder@mobileye.com> writes:

> We are creating a vmcore using kexec on a Linux 6.15 RISC-V system and
> analyzing it with the crash tool on the host. This workflow used to
> work on Linux 6.14 but is now broken in 6.15.

Thanks for reporting this!

> The issue is caused by a change in the kernel:
> In Linux 6.15, certain memblock sections are now marked as Reserved in
> /proc/iomem. The kexec tool excludes all Reserved regions when
> generating the vmcore, so these sections are missing from the dump.

How are you collecting the /proc/vmcore file? A full set of commands
would be helpful.

> However, the kernel still uses addresses in these regions—for example,
> for IRQ pointers. Since the crash tool needs access to these memory
> areas to function correctly, their exclusion breaks the analysis.

Wdym with "IRQ pointers"? Also, what version (sha1) of crash are you
using?


Thanks!
Björn

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

RE: [PATCH 0/1] Fix for riscv vmcore issue

[Pnina Feder]

> Pnina!
>
> Pnina Feder <pnina.feder@mobileye.com> writes:
>
> > We are creating a vmcore using kexec on a Linux 6.15 RISC-V system and 
> > analyzing it with the crash tool on the host. This workflow used to 
> > work on Linux 6.14 but is now broken in 6.15.
>
> Thanks for reporting this!
>
> > The issue is caused by a change in the kernel:
> > In Linux 6.15, certain memblock sections are now marked as Reserved in 
> > /proc/iomem. The kexec tool excludes all Reserved regions when 
> > generating the vmcore, so these sections are missing from the dump.
>
> How are you collecting the /proc/vmcore file? A full set of commands would be helpful.
>

We’ve defined in our system that when a process crashes, we call panic().
To handle crash recovery, we're using kexec with the following command:
kexec -p /Image --initrd=/rootfs.cpio --append "console=${con} earlycon=${earlycon} no4lvl"

To simulate crash, we trigger it using: 
sleep 100 & kill -6 $!

This boots into the crash kernel (kdump), where we then copy the /proc/vmcore file back to the host for analysis.

> > However, the kernel still uses addresses in these regions—for example, 
> > for IRQ pointers. Since the crash tool needs access to these memory 
> > areas to function correctly, their exclusion breaks the analysis.
>
> Wdym with "IRQ pointers"? Also, what version (sha1) of crash are you using?
>

We are currently using crash-utility version 9.0.0 (master).
From the crash analysis logs, we observed errors like:

"......
IRQ stack pointer[0] is  ffffffd6fbdcc068
crash: read error: kernel virtual address: ffffffd6fbdcc068  type: "IRQ stack pointer"
.....

<read_kdump: addr: ffffffff80edf1cc paddr: 8010df1cc cnt: 4>
<readmem: ffffffd6fbdd6880, KVADDR, "runqueues entry (per_cpu)", 3456, (FOE), 55acf03963e0>
>read_kdump: addr: ffffffd6fbdd6880 paddr: 8fbdd6880 cnt: 1920<
crash: read error: kernel virtual address: ffffffd6fbdd6880  type: "runqueues entry (per_cpu)"

These failures occur consistently for addresses in the 0xffffffd000000000 region.
Upon inspection, we confirmed that the physical addresses corresponding to those virtual addresses are not present in the vmcore, as they fall under Reserved memory sections.
We tested a patch to kexec-tools that prevents exclusion of the Reserved-memblock section from the vmcore. With this patch, the issue no longer occurs, and crash analysis succeeds.
Note: I suspect the same issue exists on ARM64, as both the signal.c and kexec-tools implementations are similar.

>
> Thanks!
> Björn
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 0/1] Fix for riscv vmcore issue

[Alexandre Ghiti]

Hi Pnina,

On 7/3/25 14:06, Pnina Feder wrote:
>> Pnina!
>>
>> Pnina Feder <pnina.feder@mobileye.com> writes:
>>
>>> We are creating a vmcore using kexec on a Linux 6.15 RISC-V system and
>>> analyzing it with the crash tool on the host. This workflow used to
>>> work on Linux 6.14 but is now broken in 6.15.
>> Thanks for reporting this!
>>
>>> The issue is caused by a change in the kernel:
>>> In Linux 6.15, certain memblock sections are now marked as Reserved in
>>> /proc/iomem. The kexec tool excludes all Reserved regions when
>>> generating the vmcore, so these sections are missing from the dump.
>> How are you collecting the /proc/vmcore file? A full set of commands would be helpful.
>>
> We’ve defined in our system that when a process crashes, we call panic().
> To handle crash recovery, we're using kexec with the following command:
> kexec -p /Image --initrd=/rootfs.cpio --append "console=${con} earlycon=${earlycon} no4lvl"
>
> To simulate crash, we trigger it using:
> sleep 100 & kill -6 $!
>
> This boots into the crash kernel (kdump), where we then copy the /proc/vmcore file back to the host for analysis.
>
>>> However, the kernel still uses addresses in these regions—for example,
>>> for IRQ pointers. Since the crash tool needs access to these memory
>>> areas to function correctly, their exclusion breaks the analysis.
>> Wdym with "IRQ pointers"? Also, what version (sha1) of crash are you using?
>>
> We are currently using crash-utility version 9.0.0 (master).
>  From the crash analysis logs, we observed errors like:
>
> "......
> IRQ stack pointer[0] is  ffffffd6fbdcc068
> crash: read error: kernel virtual address: ffffffd6fbdcc068  type: "IRQ stack pointer"
> .....
>
> <read_kdump: addr: ffffffff80edf1cc paddr: 8010df1cc cnt: 4>
> <readmem: ffffffd6fbdd6880, KVADDR, "runqueues entry (per_cpu)", 3456, (FOE), 55acf03963e0>
>> read_kdump: addr: ffffffd6fbdd6880 paddr: 8fbdd6880 cnt: 1920<
> crash: read error: kernel virtual address: ffffffd6fbdd6880  type: "runqueues entry (per_cpu)"


I can't reproduce this issue on qemu, booting with sv39. I'm using the 
latest kexec-tools (which recently merged riscv support), crash 9.0.0 
and kernel 6.16.0-rc4. Note that I'm using crash in qemu.

Are you able to reproduce this on qemu too?

Maybe that's related to the config, can you share your config?


>
> These failures occur consistently for addresses in the 0xffffffd000000000 region.


FYI, this region is the direct mapping (see 
Documentation/arch/riscv/vm-layout.rst).

Thanks,

Alex


> Upon inspection, we confirmed that the physical addresses corresponding to those virtual addresses are not present in the vmcore, as they fall under Reserved memory sections.
> We tested a patch to kexec-tools that prevents exclusion of the Reserved-memblock section from the vmcore. With this patch, the issue no longer occurs, and crash analysis succeeds.
> Note: I suspect the same issue exists on ARM64, as both the signal.c and kexec-tools implementations are similar.
>
>> Thanks!
>> Björn

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

RE: [PATCH 0/1] Fix for riscv vmcore issue

[Pnina Feder]

>Hi Pnina,
>
>>> Pnina!
>>>
>>> Pnina Feder <pnina.feder@mobileye.com> writes:
>>>
>>>> We are creating a vmcore using kexec on a Linux 6.15 RISC-V system 
>>>> and analyzing it with the crash tool on the host. This workflow used 
>>>> to work on Linux 6.14 but is now broken in 6.15.
>>> Thanks for reporting this!
>>>
>>>> The issue is caused by a change in the kernel:
>>>> In Linux 6.15, certain memblock sections are now marked as Reserved 
>>>> in /proc/iomem. The kexec tool excludes all Reserved regions when 
>>>> generating the vmcore, so these sections are missing from the dump.
>>>> How are you collecting the /proc/vmcore file? A full set of commands would be helpful.
>>>
>> We’ve defined in our system that when a process crashes, we call panic().
>> To handle crash recovery, we're using kexec with the following command:
>> kexec -p /Image --initrd=/rootfs.cpio --append "console=${con} earlycon=${earlycon} no4lvl"
>>
>> To simulate crash, we trigger it using:
>> sleep 100 & kill -6 $!
>>
>> This boots into the crash kernel (kdump), where we then copy the /proc/vmcore file back to the host for analysis.
>>
>>>> However, the kernel still uses addresses in these regions—for 
>>>> example, for IRQ pointers. Since the crash tool needs access to 
>>>> these memory areas to function correctly, their exclusion breaks the analysis.
>>> Wdym with "IRQ pointers"? Also, what version (sha1) of crash are you using?
>>>
>>> We are currently using crash-utility version 9.0.0 (master).
>>>  From the crash analysis logs, we observed errors like:
>>>
>> "......
>> IRQ stack pointer[0] is  ffffffd6fbdcc068
>>> crash: read error: kernel virtual address: ffffffd6fbdcc068  type: "IRQ stack pointer"
>> .....
>>
>>> <read_kdump: addr: ffffffff80edf1cc paddr: 8010df1cc cnt: 4>
>> <readmem: ffffffd6fbdd6880, KVADDR, "runqueues entry (per_cpu)", 3456, 
>> (FOE), 55acf03963e0>
>>> read_kdump: addr: ffffffd6fbdd6880 paddr: 8fbdd6880 cnt: 1920<
>> crash: read error: kernel virtual address: ffffffd6fbdd6880  type: "runqueues entry (per_cpu)"
>
>
>I can't reproduce this issue on qemu, booting with sv39. I'm using the latest kexec-tools (which recently merged riscv support), crash 9.0.0 and kernel 6.16.0-rc4. Note that I'm using crash in qemu.
>
>Are you able to reproduce this on qemu too?

Yes, I am using qemu too on main and crash kernel, with latest kexec-tools, crash 9.0.0 and kernel 6.15


>Maybe that's related to the config, can you share your config?

this is my dev_config 

CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_AUDIT=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BPF_SYSCALL=y
CONFIG_PREEMPT_RT=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_PSI=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CGROUPS=y
CONFIG_MEMCG=y
CONFIG_CGROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_NAMESPACES=y
CONFIG_USER_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_PROFILING=y
CONFIG_KEXEC=y
CONFIG_ARCH_VIRT=y
CONFIG_NONPORTABLE=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_HZ_1000=y
CONFIG_CPU_IDLE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_IOSCHED_BFQ=y
CONFIG_PAGE_REPORTING=y
CONFIG_PERCPU_STATS=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_INET_ESP=m
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_BRIDGE=m
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_VLAN_8021Q=m
CONFIG_NET_SCHED=y
CONFIG_NET_CLS_CGROUP=m
CONFIG_NETLINK_DIAG=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_FAILOVER=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
CONFIG_VIRTIO_BLK=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_VIRTIO=y
CONFIG_MD=y
CONFIG_BLK_DEV_DM=y
CONFIG_NETDEVICES=y
CONFIG_MACB=y
CONFIG_PCS_XPCS=m
CONFIG_SERIO_LIBPS2=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_I2C=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_SPI=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_SIFIVE=y
CONFIG_POWER_SUPPLY=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_DMADEVICES=y
CONFIG_SYNC_FILE=y
CONFIG_COMMON_CLK_EYEQ=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_VIRTIO=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_SIMPLE=y
CONFIG_GENERIC_PHY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_PATH=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_BLAKE2B=m
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRC_CCITT=m
CONFIG_CRC_ITU_T=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=m
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO_DWARF5=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_PTDUMP_DEBUGFS=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_WQ_WATCHDOG=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
CONFIG_RCU_EQS_DEBUG=y
CONFIG_MEMTEST=y

>> These failures occur consistently for addresses in the 0xffffffd000000000 region.
>
>
>FYI, this region is the direct mapping (see Documentation/arch/riscv/vm-layout.rst).
>
>Thanks,
>
>Alex
>
>
>> Upon inspection, we confirmed that the physical addresses corresponding to those virtual addresses are not present in the vmcore, as they fall under Reserved memory sections.
>> We tested a patch to kexec-tools that prevents exclusion of the Reserved-memblock section from the vmcore. With this patch, the issue no longer occurs, and crash analysis succeeds.
>> Note: I suspect the same issue exists on ARM64, as both the signal.c and kexec-tools implementations are similar.
>>
>>> Thanks!
>>> Björn
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

RE: [PATCH 0/1] Fix for riscv vmcore issue

[Pnina Feder]

>>>Hi Pnina,
>>
>>>> Pnina!
>>>>
>>>> Pnina Feder <pnina.feder@mobileye.com> writes:
>>>>
>>>>> We are creating a vmcore using kexec on a Linux 6.15 RISC-V system 
>>>>> and analyzing it with the crash tool on the host. This workflow 
>>>>> used to work on Linux 6.14 but is now broken in 6.15.
>>>> Thanks for reporting this!
>>>>
>>>>> The issue is caused by a change in the kernel:
>>>>> In Linux 6.15, certain memblock sections are now marked as Reserved 
>>>>> in /proc/iomem. The kexec tool excludes all Reserved regions when 
>>>>> generating the vmcore, so these sections are missing from the dump.
>>>>> How are you collecting the /proc/vmcore file? A full set of commands would be helpful.
>>>>
>>> We’ve defined in our system that when a process crashes, we call panic().
>>> To handle crash recovery, we're using kexec with the following command:
>>> kexec -p /Image --initrd=/rootfs.cpio --append "console=${con} earlycon=${earlycon} no4lvl"
>>>
>>> To simulate crash, we trigger it using:
>>> sleep 100 & kill -6 $!
>>>
>>> This boots into the crash kernel (kdump), where we then copy the /proc/vmcore file back to the host for analysis.
>>>
>>>>> However, the kernel still uses addresses in these regions—for 
>>>>> example, for IRQ pointers. Since the crash tool needs access to 
>>>>> these memory areas to function correctly, their exclusion breaks the analysis.
>>>> Wdym with "IRQ pointers"? Also, what version (sha1) of crash are you using?
>>>>
>>>> We are currently using crash-utility version 9.0.0 (master).
>>>>  From the crash analysis logs, we observed errors like:
>>>>
>>> "......
>>> IRQ stack pointer[0] is  ffffffd6fbdcc068
>>>> crash: read error: kernel virtual address: ffffffd6fbdcc068  type: "IRQ stack pointer"
>>> .....
>>>
>>>> <read_kdump: addr: ffffffff80edf1cc paddr: 8010df1cc cnt: 4>
>>> <readmem: ffffffd6fbdd6880, KVADDR, "runqueues entry (per_cpu)", 
>>> 3456, (FOE), 55acf03963e0>
>>>> read_kdump: addr: ffffffd6fbdd6880 paddr: 8fbdd6880 cnt: 1920<
>>> crash: read error: kernel virtual address: ffffffd6fbdd6880  type: "runqueues entry (per_cpu)"
>>
>>
>>I can't reproduce this issue on qemu, booting with sv39. I'm using the latest kexec-tools (which recently merged riscv .support), crash 9.0.0 and kernel 6.16.0-rc4. Note that I'm using crash in qemu.
>>
>>Are you able to reproduce this on qemu too?
>
>Yes, I am using qemu too on main and crash kernel, with latest kexec-tools, crash 9.0.0 and kernel 6.15
>
>
>>Maybe that's related to the config, can you share your config?
>
>this is my dev_config 
>
> CONFIG_SYSVIPC=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_AUDIT=y
> CONFIG_NO_HZ_IDLE=y
> CONFIG_HIGH_RES_TIMERS=y
> CONFIG_BPF_SYSCALL=y
> CONFIG_PREEMPT_RT=y
> CONFIG_TASKSTATS=y
> CONFIG_TASK_DELAY_ACCT=y
> CONFIG_PSI=y
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> CONFIG_CGROUPS=y
> CONFIG_MEMCG=y
> CONFIG_CGROUP_SCHED=y
> CONFIG_CFS_BANDWIDTH=y
> CONFIG_RT_GROUP_SCHED=y
> CONFIG_CGROUP_PIDS=y
> CONFIG_CGROUP_FREEZER=y
> CONFIG_CGROUP_HUGETLB=y
> CONFIG_CPUSETS=y
> CONFIG_CGROUP_DEVICE=y
> CONFIG_CGROUP_CPUACCT=y
> CONFIG_CGROUP_PERF=y
> CONFIG_CGROUP_BPF=y
> CONFIG_NAMESPACES=y
> CONFIG_USER_NS=y
> CONFIG_CHECKPOINT_RESTORE=y
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_EXPERT=y
> CONFIG_PROFILING=y
> CONFIG_KEXEC=y
> CONFIG_ARCH_VIRT=y
> CONFIG_NONPORTABLE=y
> CONFIG_SMP=y
> CONFIG_NR_CPUS=32
> CONFIG_HZ_1000=y
> CONFIG_CPU_IDLE=y
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> CONFIG_IOSCHED_BFQ=y
> CONFIG_PAGE_REPORTING=y
> CONFIG_PERCPU_STATS=y
> CONFIG_NET=y
> CONFIG_PACKET=y
> CONFIG_UNIX=y
> CONFIG_XFRM_USER=m
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_INET_ESP=m
> CONFIG_NETWORK_SECMARK=y
> CONFIG_NETFILTER=y
> CONFIG_IP_NF_IPTABLES=y
> CONFIG_IP_NF_FILTER=y
> CONFIG_BRIDGE=m
> CONFIG_BRIDGE_VLAN_FILTERING=y
> CONFIG_VLAN_8021Q=m
> CONFIG_NET_SCHED=y
> CONFIG_NET_CLS_CGROUP=m
> CONFIG_NETLINK_DIAG=y
> CONFIG_NET_L3_MASTER_DEV=y
> CONFIG_CGROUP_NET_PRIO=y
> CONFIG_FAILOVER=y
> CONFIG_DEVTMPFS=y
> CONFIG_DEVTMPFS_MOUNT=y
> CONFIG_MTD=y
> CONFIG_MTD_BLOCK=y
> CONFIG_MTD_CFI=y
> CONFIG_MTD_CFI_INTELEXT=y
> CONFIG_MTD_PHYSMAP=y
> CONFIG_MTD_PHYSMAP_OF=y
> CONFIG_BLK_DEV_LOOP=y
> CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
> CONFIG_VIRTIO_BLK=y
> CONFIG_SCSI=y
> CONFIG_BLK_DEV_SD=y
> CONFIG_SCSI_VIRTIO=y
> CONFIG_MD=y
> CONFIG_BLK_DEV_DM=y
> CONFIG_NETDEVICES=y
> CONFIG_MACB=y
> CONFIG_PCS_XPCS=m
> CONFIG_SERIO_LIBPS2=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_LEGACY_PTY_COUNT=16
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_OF_PLATFORM=y
> CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
> CONFIG_VIRTIO_CONSOLE=y
> CONFIG_HW_RANDOM=y
> CONFIG_HW_RANDOM_VIRTIO=y
> CONFIG_I2C=y
> CONFIG_I2C_DESIGNWARE_CORE=y
> CONFIG_SPI=y
> CONFIG_PINCTRL=y
> CONFIG_PINCTRL_SINGLE=y
> CONFIG_GPIOLIB=y
> CONFIG_GPIO_SYSFS=y
> CONFIG_GPIO_DWAPB=y
> CONFIG_GPIO_SIFIVE=y
> CONFIG_POWER_SUPPLY=y
> CONFIG_WATCHDOG=y
> CONFIG_WATCHDOG_CORE=y
> CONFIG_REGULATOR=y
> CONFIG_REGULATOR_FIXED_VOLTAGE=y
> CONFIG_BACKLIGHT_CLASS_DEVICE=m
> CONFIG_SCSI_UFSHCD=y
> CONFIG_SCSI_UFSHCD_PLATFORM=y
> CONFIG_SCSI_UFS_DWC_TC_PLATFORM=y
> CONFIG_RTC_CLASS=y
> CONFIG_RTC_DRV_M41T80=y
> CONFIG_DMADEVICES=y
> CONFIG_SYNC_FILE=y
> CONFIG_COMMON_CLK_EYEQ=y
> CONFIG_RPMSG_CHAR=y
> CONFIG_RPMSG_CTRL=y
> CONFIG_RPMSG_VIRTIO=y
> CONFIG_RESET_CONTROLLER=y
> CONFIG_RESET_SIMPLE=y
> CONFIG_GENERIC_PHY=y
> CONFIG_EXT4_FS=y
> CONFIG_EXT4_FS_POSIX_ACL=y
> CONFIG_EXT4_FS_SECURITY=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_TMPFS=y
> CONFIG_TMPFS_POSIX_ACL=y
> CONFIG_HUGETLBFS=y
> CONFIG_KEYS=y
> CONFIG_SECURITY=y
> CONFIG_SECURITYFS=y
> CONFIG_SECURITY_NETWORK=y
> CONFIG_SECURITY_PATH=y
> CONFIG_CRYPTO_RSA=y
> CONFIG_CRYPTO_ECB=y
> CONFIG_CRYPTO_BLAKE2B=m
> CONFIG_CRYPTO_XXHASH=m
> CONFIG_CRYPTO_USER_API_HASH=y
> CONFIG_CRC_CCITT=m
> CONFIG_CRC_ITU_T=y
> CONFIG_CRC7=y
> CONFIG_LIBCRC32C=m
> CONFIG_PRINTK_TIME=y
> CONFIG_DYNAMIC_DEBUG=y
> CONFIG_DEBUG_INFO_DWARF5=y
> CONFIG_DEBUG_FS=y
> CONFIG_DEBUG_PAGEALLOC=y
> CONFIG_PTDUMP_DEBUGFS=y
> CONFIG_SCHED_STACK_END_CHECK=y
> CONFIG_DEBUG_VM=y
> CONFIG_DEBUG_VM_PGFLAGS=y
> CONFIG_DEBUG_MEMORY_INIT=y
> CONFIG_DEBUG_PER_CPU_MAPS=y
> CONFIG_SOFTLOCKUP_DETECTOR=y
> CONFIG_WQ_WATCHDOG=y
> CONFIG_DEBUG_RT_MUTEXES=y
> CONFIG_DEBUG_SPINLOCK=y
> CONFIG_DEBUG_ATOMIC_SLEEP=y
> CONFIG_DEBUG_LIST=y
> CONFIG_DEBUG_PLIST=y
> CONFIG_DEBUG_SG=y
> CONFIG_RCU_EQS_DEBUG=y
> CONFIG_MEMTEST=y
>
>>> These failures occur consistently for addresses in the 0xffffffd000000000 region.
>>
>>
>>FYI, this region is the direct mapping (see Documentation/arch/riscv/vm-layout.rst).
>>
>>Thanks,
>>
>>Alex
>>

Hi Alex!

Do I have something to try or help to process this issue?
maybe, can you give your Config and I will try it on my system?
Any more information I can share?

Thanks a lot,
Pnina

>>
>>> Upon inspection, we confirmed that the physical addresses corresponding to those virtual addresses are not present in the vmcore, as they fall under Reserved memory sections.
>>> We tested a patch to kexec-tools that prevents exclusion of the Reserved-memblock section from the vmcore. With this patch, the issue no longer occurs, and crash analysis succeeds.
>>> Note: I suspect the same issue exists on ARM64, as both the signal.c and kexec-tools implementations are similar.
>>>
>>>> Thanks!
>>>> Björn
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 0/1] Fix for riscv vmcore issue

[Alexandre Ghiti]

Hi Pnina,

On 7/14/25 14:00, Pnina Feder wrote:
>>>> Hi Pnina,
>>>>> Pnina!
>>>>>
>>>>> Pnina Feder <pnina.feder@mobileye.com> writes:
>>>>>
>>>>>> We are creating a vmcore using kexec on a Linux 6.15 RISC-V system
>>>>>> and analyzing it with the crash tool on the host. This workflow
>>>>>> used to work on Linux 6.14 but is now broken in 6.15.
>>>>> Thanks for reporting this!
>>>>>
>>>>>> The issue is caused by a change in the kernel:
>>>>>> In Linux 6.15, certain memblock sections are now marked as Reserved
>>>>>> in /proc/iomem. The kexec tool excludes all Reserved regions when
>>>>>> generating the vmcore, so these sections are missing from the dump.
>>>>>> How are you collecting the /proc/vmcore file? A full set of commands would be helpful.
>>>> We’ve defined in our system that when a process crashes, we call panic().
>>>> To handle crash recovery, we're using kexec with the following command:
>>>> kexec -p /Image --initrd=/rootfs.cpio --append "console=${con} earlycon=${earlycon} no4lvl"
>>>>
>>>> To simulate crash, we trigger it using:
>>>> sleep 100 & kill -6 $!
>>>>
>>>> This boots into the crash kernel (kdump), where we then copy the /proc/vmcore file back to the host for analysis.
>>>>
>>>>>> However, the kernel still uses addresses in these regions—for
>>>>>> example, for IRQ pointers. Since the crash tool needs access to
>>>>>> these memory areas to function correctly, their exclusion breaks the analysis.
>>>>> Wdym with "IRQ pointers"? Also, what version (sha1) of crash are you using?
>>>>>
>>>>> We are currently using crash-utility version 9.0.0 (master).
>>>>>   From the crash analysis logs, we observed errors like:
>>>>>
>>>> "......
>>>> IRQ stack pointer[0] is  ffffffd6fbdcc068
>>>>> crash: read error: kernel virtual address: ffffffd6fbdcc068  type: "IRQ stack pointer"
>>>> .....
>>>>
>>>>> <read_kdump: addr: ffffffff80edf1cc paddr: 8010df1cc cnt: 4>
>>>> <readmem: ffffffd6fbdd6880, KVADDR, "runqueues entry (per_cpu)",
>>>> 3456, (FOE), 55acf03963e0>
>>>>> read_kdump: addr: ffffffd6fbdd6880 paddr: 8fbdd6880 cnt: 1920<
>>>> crash: read error: kernel virtual address: ffffffd6fbdd6880  type: "runqueues entry (per_cpu)"
>>>
>>> I can't reproduce this issue on qemu, booting with sv39. I'm using the latest kexec-tools (which recently merged riscv .support), crash 9.0.0 and kernel 6.16.0-rc4. Note that I'm using crash in qemu.
>>>
>>> Are you able to reproduce this on qemu too?
>> Yes, I am using qemu too on main and crash kernel, with latest kexec-tools, crash 9.0.0 and kernel 6.15
>>
>>
>>> Maybe that's related to the config, can you share your config?
>> this is my dev_config
>>
>> CONFIG_SYSVIPC=y
>> CONFIG_POSIX_MQUEUE=y
>> CONFIG_AUDIT=y
>> CONFIG_NO_HZ_IDLE=y
>> CONFIG_HIGH_RES_TIMERS=y
>> CONFIG_BPF_SYSCALL=y
>> CONFIG_PREEMPT_RT=y
>> CONFIG_TASKSTATS=y
>> CONFIG_TASK_DELAY_ACCT=y
>> CONFIG_PSI=y
>> CONFIG_IKCONFIG=y
>> CONFIG_IKCONFIG_PROC=y
>> CONFIG_CGROUPS=y
>> CONFIG_MEMCG=y
>> CONFIG_CGROUP_SCHED=y
>> CONFIG_CFS_BANDWIDTH=y
>> CONFIG_RT_GROUP_SCHED=y
>> CONFIG_CGROUP_PIDS=y
>> CONFIG_CGROUP_FREEZER=y
>> CONFIG_CGROUP_HUGETLB=y
>> CONFIG_CPUSETS=y
>> CONFIG_CGROUP_DEVICE=y
>> CONFIG_CGROUP_CPUACCT=y
>> CONFIG_CGROUP_PERF=y
>> CONFIG_CGROUP_BPF=y
>> CONFIG_NAMESPACES=y
>> CONFIG_USER_NS=y
>> CONFIG_CHECKPOINT_RESTORE=y
>> CONFIG_BLK_DEV_INITRD=y
>> CONFIG_EXPERT=y
>> CONFIG_PROFILING=y
>> CONFIG_KEXEC=y
>> CONFIG_ARCH_VIRT=y
>> CONFIG_NONPORTABLE=y
>> CONFIG_SMP=y
>> CONFIG_NR_CPUS=32
>> CONFIG_HZ_1000=y
>> CONFIG_CPU_IDLE=y
>> CONFIG_MODULES=y
>> CONFIG_MODULE_UNLOAD=y
>> CONFIG_IOSCHED_BFQ=y
>> CONFIG_PAGE_REPORTING=y
>> CONFIG_PERCPU_STATS=y
>> CONFIG_NET=y
>> CONFIG_PACKET=y
>> CONFIG_UNIX=y
>> CONFIG_XFRM_USER=m
>> CONFIG_INET=y
>> CONFIG_IP_MULTICAST=y
>> CONFIG_IP_ADVANCED_ROUTER=y
>> CONFIG_INET_ESP=m
>> CONFIG_NETWORK_SECMARK=y
>> CONFIG_NETFILTER=y
>> CONFIG_IP_NF_IPTABLES=y
>> CONFIG_IP_NF_FILTER=y
>> CONFIG_BRIDGE=m
>> CONFIG_BRIDGE_VLAN_FILTERING=y
>> CONFIG_VLAN_8021Q=m
>> CONFIG_NET_SCHED=y
>> CONFIG_NET_CLS_CGROUP=m
>> CONFIG_NETLINK_DIAG=y
>> CONFIG_NET_L3_MASTER_DEV=y
>> CONFIG_CGROUP_NET_PRIO=y
>> CONFIG_FAILOVER=y
>> CONFIG_DEVTMPFS=y
>> CONFIG_DEVTMPFS_MOUNT=y
>> CONFIG_MTD=y
>> CONFIG_MTD_BLOCK=y
>> CONFIG_MTD_CFI=y
>> CONFIG_MTD_CFI_INTELEXT=y
>> CONFIG_MTD_PHYSMAP=y
>> CONFIG_MTD_PHYSMAP_OF=y
>> CONFIG_BLK_DEV_LOOP=y
>> CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
>> CONFIG_VIRTIO_BLK=y
>> CONFIG_SCSI=y
>> CONFIG_BLK_DEV_SD=y
>> CONFIG_SCSI_VIRTIO=y
>> CONFIG_MD=y
>> CONFIG_BLK_DEV_DM=y
>> CONFIG_NETDEVICES=y
>> CONFIG_MACB=y
>> CONFIG_PCS_XPCS=m
>> CONFIG_SERIO_LIBPS2=y
>> CONFIG_VT_HW_CONSOLE_BINDING=y
>> CONFIG_LEGACY_PTY_COUNT=16
>> CONFIG_SERIAL_8250=y
>> CONFIG_SERIAL_8250_CONSOLE=y
>> CONFIG_SERIAL_OF_PLATFORM=y
>> CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
>> CONFIG_VIRTIO_CONSOLE=y
>> CONFIG_HW_RANDOM=y
>> CONFIG_HW_RANDOM_VIRTIO=y
>> CONFIG_I2C=y
>> CONFIG_I2C_DESIGNWARE_CORE=y
>> CONFIG_SPI=y
>> CONFIG_PINCTRL=y
>> CONFIG_PINCTRL_SINGLE=y
>> CONFIG_GPIOLIB=y
>> CONFIG_GPIO_SYSFS=y
>> CONFIG_GPIO_DWAPB=y
>> CONFIG_GPIO_SIFIVE=y
>> CONFIG_POWER_SUPPLY=y
>> CONFIG_WATCHDOG=y
>> CONFIG_WATCHDOG_CORE=y
>> CONFIG_REGULATOR=y
>> CONFIG_REGULATOR_FIXED_VOLTAGE=y
>> CONFIG_BACKLIGHT_CLASS_DEVICE=m
>> CONFIG_SCSI_UFSHCD=y
>> CONFIG_SCSI_UFSHCD_PLATFORM=y
>> CONFIG_SCSI_UFS_DWC_TC_PLATFORM=y
>> CONFIG_RTC_CLASS=y
>> CONFIG_RTC_DRV_M41T80=y
>> CONFIG_DMADEVICES=y
>> CONFIG_SYNC_FILE=y
>> CONFIG_COMMON_CLK_EYEQ=y
>> CONFIG_RPMSG_CHAR=y
>> CONFIG_RPMSG_CTRL=y
>> CONFIG_RPMSG_VIRTIO=y
>> CONFIG_RESET_CONTROLLER=y
>> CONFIG_RESET_SIMPLE=y
>> CONFIG_GENERIC_PHY=y
>> CONFIG_EXT4_FS=y
>> CONFIG_EXT4_FS_POSIX_ACL=y
>> CONFIG_EXT4_FS_SECURITY=y
>> CONFIG_MSDOS_FS=y
>> CONFIG_VFAT_FS=y
>> CONFIG_TMPFS=y
>> CONFIG_TMPFS_POSIX_ACL=y
>> CONFIG_HUGETLBFS=y
>> CONFIG_KEYS=y
>> CONFIG_SECURITY=y
>> CONFIG_SECURITYFS=y
>> CONFIG_SECURITY_NETWORK=y
>> CONFIG_SECURITY_PATH=y
>> CONFIG_CRYPTO_RSA=y
>> CONFIG_CRYPTO_ECB=y
>> CONFIG_CRYPTO_BLAKE2B=m
>> CONFIG_CRYPTO_XXHASH=m
>> CONFIG_CRYPTO_USER_API_HASH=y
>> CONFIG_CRC_CCITT=m
>> CONFIG_CRC_ITU_T=y
>> CONFIG_CRC7=y
>> CONFIG_LIBCRC32C=m
>> CONFIG_PRINTK_TIME=y
>> CONFIG_DYNAMIC_DEBUG=y
>> CONFIG_DEBUG_INFO_DWARF5=y
>> CONFIG_DEBUG_FS=y
>> CONFIG_DEBUG_PAGEALLOC=y
>> CONFIG_PTDUMP_DEBUGFS=y
>> CONFIG_SCHED_STACK_END_CHECK=y
>> CONFIG_DEBUG_VM=y
>> CONFIG_DEBUG_VM_PGFLAGS=y
>> CONFIG_DEBUG_MEMORY_INIT=y
>> CONFIG_DEBUG_PER_CPU_MAPS=y
>> CONFIG_SOFTLOCKUP_DETECTOR=y
>> CONFIG_WQ_WATCHDOG=y
>> CONFIG_DEBUG_RT_MUTEXES=y
>> CONFIG_DEBUG_SPINLOCK=y
>> CONFIG_DEBUG_ATOMIC_SLEEP=y
>> CONFIG_DEBUG_LIST=y
>> CONFIG_DEBUG_PLIST=y
>> CONFIG_DEBUG_SG=y
>> CONFIG_RCU_EQS_DEBUG=y
>> CONFIG_MEMTEST=y
>>
>>>> These failures occur consistently for addresses in the 0xffffffd000000000 region.
>>>
>>> FYI, this region is the direct mapping (see Documentation/arch/riscv/vm-layout.rst).
>>>
>>> Thanks,
>>>
>>> Alex
>>>
> Hi Alex!
>
> Do I have something to try or help to process this issue?
> maybe, can you give your Config and I will try it on my system?
> Any more information I can share?


So I'm able to reproduce your issue with your config, it only happens 
with kexec_load(), not kexec_file_load().

Your patch does not fix the problem for me, makedumpfile still fails. I 
spent quite some time looking for the code that parses the memory 
regions and exposes them as PT_LOAD segments in vmcore, but I did not 
find it, do you know where that happens for kexec_load()?

Thanks,

Alex


>
> Thanks a lot,
> Pnina
>
>>>> Upon inspection, we confirmed that the physical addresses corresponding to those virtual addresses are not present in the vmcore, as they fall under Reserved memory sections.
>>>> We tested a patch to kexec-tools that prevents exclusion of the Reserved-memblock section from the vmcore. With this patch, the issue no longer occurs, and crash analysis succeeds.
>>>> Note: I suspect the same issue exists on ARM64, as both the signal.c and kexec-tools implementations are similar.
>>>>
>>>>> Thanks!
>>>>> Björn
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

RE: [PATCH 0/1] Fix for riscv vmcore issue

[Pnina Feder]

Hi Alex,
Thank you for your response!

>Hi Pnina,
>
>On 7/14/25 14:00, Pnina Feder wrote:
>>>>> Hi Pnina,
>>>>>> Pnina!
>>>>>>
>>>>>> Pnina Feder <pnina.feder@mobileye.com> writes:
>>>>>>
>>>>>>> We are creating a vmcore using kexec on a Linux 6.15 RISC-V 
>>>>>>> system and analyzing it with the crash tool on the host. This 
>>>>>>> workflow used to work on Linux 6.14 but is now broken in 6.15.
>>>>>> Thanks for reporting this!
>>>>>>
>>>>>>> The issue is caused by a change in the kernel:
>>>>>>> In Linux 6.15, certain memblock sections are now marked as 
>>>>>>> Reserved in /proc/iomem. The kexec tool excludes all Reserved 
>>>>>>> regions when generating the vmcore, so these sections are missing from the dump.
>>>>>>> How are you collecting the /proc/vmcore file? A full set of commands would be helpful.
>>>>> We’ve defined in our system that when a process crashes, we call panic().
>>>>> To handle crash recovery, we're using kexec with the following command:
>>>>> kexec -p /Image --initrd=/rootfs.cpio --append "console=${con} earlycon=${earlycon} no4lvl"
>>>>>
>>>>> To simulate crash, we trigger it using:
>>>>> sleep 100 & kill -6 $!
>>>>>
>>>>> This boots into the crash kernel (kdump), where we then copy the /proc/vmcore file back to the host for analysis.
>>>>>
>>>>>>> However, the kernel still uses addresses in these regions—for 
>>>>>>> example, for IRQ pointers. Since the crash tool needs access to 
>>>>>>> these memory areas to function correctly, their exclusion breaks the analysis.
>>>>>> Wdym with "IRQ pointers"? Also, what version (sha1) of crash are you using?
>>>>>>
>>>>>> We are currently using crash-utility version 9.0.0 (master).
>>>>>>   From the crash analysis logs, we observed errors like:
>>>>>>
>>>>> "......
>>>>> IRQ stack pointer[0] is  ffffffd6fbdcc068
>>>>>> crash: read error: kernel virtual address: ffffffd6fbdcc068  type: "IRQ stack pointer"
>>>>> .....
>>>>>
>>>>>> <read_kdump: addr: ffffffff80edf1cc paddr: 8010df1cc cnt: 4>
>>>>> <readmem: ffffffd6fbdd6880, KVADDR, "runqueues entry (per_cpu)", 
>>>>> 3456, (FOE), 55acf03963e0>
>>>>>> read_kdump: addr: ffffffd6fbdd6880 paddr: 8fbdd6880 cnt: 1920<
>>>>> crash: read error: kernel virtual address: ffffffd6fbdd6880  type: "runqueues entry (per_cpu)"
>>>>
>>>> I can't reproduce this issue on qemu, booting with sv39. I'm using the latest kexec-tools (which recently merged riscv .support), crash 9.0.0 and kernel 6.16.0-rc4. Note that I'm using crash in qemu.
>>>>
>>>> Are you able to reproduce this on qemu too?
>>> Yes, I am using qemu too on main and crash kernel, with latest 
>>> kexec-tools, crash 9.0.0 and kernel 6.15
>>>
>>>
>>>> Maybe that's related to the config, can you share your config?
>>> this is my dev_config
>>>
>>> CONFIG_SYSVIPC=y
>>> CONFIG_POSIX_MQUEUE=y
>>> CONFIG_AUDIT=y
>>> CONFIG_NO_HZ_IDLE=y
>>> CONFIG_HIGH_RES_TIMERS=y
>>> CONFIG_BPF_SYSCALL=y
>>> CONFIG_PREEMPT_RT=y
>>> CONFIG_TASKSTATS=y
>>> CONFIG_TASK_DELAY_ACCT=y
>>> CONFIG_PSI=y
>>> CONFIG_IKCONFIG=y
>>> CONFIG_IKCONFIG_PROC=y
>>> CONFIG_CGROUPS=y
>>> CONFIG_MEMCG=y
>>> CONFIG_CGROUP_SCHED=y
>>> CONFIG_CFS_BANDWIDTH=y
>>> CONFIG_RT_GROUP_SCHED=y
>>> CONFIG_CGROUP_PIDS=y
>>> CONFIG_CGROUP_FREEZER=y
>>> CONFIG_CGROUP_HUGETLB=y
>>> CONFIG_CPUSETS=y
>>> CONFIG_CGROUP_DEVICE=y
>>> CONFIG_CGROUP_CPUACCT=y
>>> CONFIG_CGROUP_PERF=y
>>> CONFIG_CGROUP_BPF=y
>>> CONFIG_NAMESPACES=y
>>> CONFIG_USER_NS=y
>>> CONFIG_CHECKPOINT_RESTORE=y
>>> CONFIG_BLK_DEV_INITRD=y
>>> CONFIG_EXPERT=y
>>> CONFIG_PROFILING=y
>>> CONFIG_KEXEC=y
>>> CONFIG_ARCH_VIRT=y
>>> CONFIG_NONPORTABLE=y
>>> CONFIG_SMP=y
>>> CONFIG_NR_CPUS=32
>>> CONFIG_HZ_1000=y
>>> CONFIG_CPU_IDLE=y
>>> CONFIG_MODULES=y
>>> CONFIG_MODULE_UNLOAD=y
>>> CONFIG_IOSCHED_BFQ=y
>>> CONFIG_PAGE_REPORTING=y
>>> CONFIG_PERCPU_STATS=y
>>> CONFIG_NET=y
>>> CONFIG_PACKET=y
>>> CONFIG_UNIX=y
>>> CONFIG_XFRM_USER=m
>>> CONFIG_INET=y
>>> CONFIG_IP_MULTICAST=y
>>> CONFIG_IP_ADVANCED_ROUTER=y
>>> CONFIG_INET_ESP=m
>>> CONFIG_NETWORK_SECMARK=y
>>> CONFIG_NETFILTER=y
>>> CONFIG_IP_NF_IPTABLES=y
>>> CONFIG_IP_NF_FILTER=y
>>> CONFIG_BRIDGE=m
>>> CONFIG_BRIDGE_VLAN_FILTERING=y
>>> CONFIG_VLAN_8021Q=m
>>> CONFIG_NET_SCHED=y
>>> CONFIG_NET_CLS_CGROUP=m
>>> CONFIG_NETLINK_DIAG=y
>>> CONFIG_NET_L3_MASTER_DEV=y
>>> CONFIG_CGROUP_NET_PRIO=y
>>> CONFIG_FAILOVER=y
>>> CONFIG_DEVTMPFS=y
>>> CONFIG_DEVTMPFS_MOUNT=y
>>> CONFIG_MTD=y
>>> CONFIG_MTD_BLOCK=y
>>> CONFIG_MTD_CFI=y
>>> CONFIG_MTD_CFI_INTELEXT=y
>>> CONFIG_MTD_PHYSMAP=y
>>> CONFIG_MTD_PHYSMAP_OF=y
>>> CONFIG_BLK_DEV_LOOP=y
>>> CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
>>> CONFIG_VIRTIO_BLK=y
>>> CONFIG_SCSI=y
>>> CONFIG_BLK_DEV_SD=y
>>> CONFIG_SCSI_VIRTIO=y
>>> CONFIG_MD=y
>>> CONFIG_BLK_DEV_DM=y
>>> CONFIG_NETDEVICES=y
>>> CONFIG_MACB=y
>>> CONFIG_PCS_XPCS=m
>>> CONFIG_SERIO_LIBPS2=y
>>> CONFIG_VT_HW_CONSOLE_BINDING=y
>>> CONFIG_LEGACY_PTY_COUNT=16
>>> CONFIG_SERIAL_8250=y
>>> CONFIG_SERIAL_8250_CONSOLE=y
>>> CONFIG_SERIAL_OF_PLATFORM=y
>>> CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
>>> CONFIG_VIRTIO_CONSOLE=y
>>> CONFIG_HW_RANDOM=y
>>> CONFIG_HW_RANDOM_VIRTIO=y
>>> CONFIG_I2C=y
>>> CONFIG_I2C_DESIGNWARE_CORE=y
>>> CONFIG_SPI=y
>>> CONFIG_PINCTRL=y
>>> CONFIG_PINCTRL_SINGLE=y
>>> CONFIG_GPIOLIB=y
>>> CONFIG_GPIO_SYSFS=y
>>> CONFIG_GPIO_DWAPB=y
>>> CONFIG_GPIO_SIFIVE=y
>>> CONFIG_POWER_SUPPLY=y
>>> CONFIG_WATCHDOG=y
>>> CONFIG_WATCHDOG_CORE=y
>>> CONFIG_REGULATOR=y
>>> CONFIG_REGULATOR_FIXED_VOLTAGE=y
>>> CONFIG_BACKLIGHT_CLASS_DEVICE=m
>>> CONFIG_SCSI_UFSHCD=y
>>> CONFIG_SCSI_UFSHCD_PLATFORM=y
>>> CONFIG_SCSI_UFS_DWC_TC_PLATFORM=y
>>> CONFIG_RTC_CLASS=y
>>> CONFIG_RTC_DRV_M41T80=y
>>> CONFIG_DMADEVICES=y
>>> CONFIG_SYNC_FILE=y
>>> CONFIG_COMMON_CLK_EYEQ=y
>>> CONFIG_RPMSG_CHAR=y
>>> CONFIG_RPMSG_CTRL=y
>>> CONFIG_RPMSG_VIRTIO=y
>>> CONFIG_RESET_CONTROLLER=y
>>> CONFIG_RESET_SIMPLE=y
>>> CONFIG_GENERIC_PHY=y
>>> CONFIG_EXT4_FS=y
>>> CONFIG_EXT4_FS_POSIX_ACL=y
>>> CONFIG_EXT4_FS_SECURITY=y
>>> CONFIG_MSDOS_FS=y
>>> CONFIG_VFAT_FS=y
>>> CONFIG_TMPFS=y
>>> CONFIG_TMPFS_POSIX_ACL=y
>>> CONFIG_HUGETLBFS=y
>>> CONFIG_KEYS=y
>>> CONFIG_SECURITY=y
>>> CONFIG_SECURITYFS=y
>>> CONFIG_SECURITY_NETWORK=y
>>> CONFIG_SECURITY_PATH=y
>>> CONFIG_CRYPTO_RSA=y
>>> CONFIG_CRYPTO_ECB=y
>>> CONFIG_CRYPTO_BLAKE2B=m
>>> CONFIG_CRYPTO_XXHASH=m
>>> CONFIG_CRYPTO_USER_API_HASH=y
>>> CONFIG_CRC_CCITT=m
>>> CONFIG_CRC_ITU_T=y
>>> CONFIG_CRC7=y
>>> CONFIG_LIBCRC32C=m
>>> CONFIG_PRINTK_TIME=y
>>> CONFIG_DYNAMIC_DEBUG=y
>>> CONFIG_DEBUG_INFO_DWARF5=y
>>> CONFIG_DEBUG_FS=y
>>> CONFIG_DEBUG_PAGEALLOC=y
>>> CONFIG_PTDUMP_DEBUGFS=y
>>> CONFIG_SCHED_STACK_END_CHECK=y
>>> CONFIG_DEBUG_VM=y
>>> CONFIG_DEBUG_VM_PGFLAGS=y
>>> CONFIG_DEBUG_MEMORY_INIT=y
>>> CONFIG_DEBUG_PER_CPU_MAPS=y
>>> CONFIG_SOFTLOCKUP_DETECTOR=y
>>> CONFIG_WQ_WATCHDOG=y
>>> CONFIG_DEBUG_RT_MUTEXES=y
>>> CONFIG_DEBUG_SPINLOCK=y
>>> CONFIG_DEBUG_ATOMIC_SLEEP=y
>>> CONFIG_DEBUG_LIST=y
>>> CONFIG_DEBUG_PLIST=y
>>> CONFIG_DEBUG_SG=y
>>> CONFIG_RCU_EQS_DEBUG=y
>>> CONFIG_MEMTEST=y
>>>
>>>>> These failures occur consistently for addresses in the 0xffffffd000000000 region.
>>>>
>>>> FYI, this region is the direct mapping (see Documentation/arch/riscv/vm-layout.rst).
>>>>
>>>> Thanks,
>>>>
>>>> Alex
>>>>
>> Hi Alex!
>>
>> Do I have something to try or help to process this issue?
>> maybe, can you give your Config and I will try it on my system?
>> Any more information I can share?
>
>
>So I'm able to reproduce your issue with your config, it only happens with kexec_load(), not kexec_file_load().
>
>Your patch does not fix the problem for me, makedumpfile still fails. I spent quite some time looking for the code that parses the memory regions and exposes them as PT_LOAD segments in vmcore, but I did not find it, do you know where that happens for kexec_load()?
>
>Thanks,
>
>Alex
>
>

The code that parses memory regions is located in kexec-tools.

To fix the issue with missing memory regions in the vmcore, we need to ensure that kexec-tools does not exclude the Reserved-memblock sections when generating ELF headers for kexec_load().

I’ve added a patch to handle this, and plan to submit it upstream to kexec-tools once this approach is confirmed and approved.

Kexec-tools patch:
---
diff --git a/kexec/arch/riscv/kexec-riscv.c b/kexec/arch/riscv/kexec-riscv.c
index f34b468..1a93b51 100644
--- a/kexec/arch/riscv/kexec-riscv.c
+++ b/kexec/arch/riscv/kexec-riscv.c
@@ -421,8 +421,11 @@ static bool to_be_excluded(char *str, unsigned long long start, unsigned long lo
 	    !strncmp(str, KERNEL_CODE, strlen(KERNEL_CODE)) ||
 	    !strncmp(str, KERNEL_DATA, strlen(KERNEL_DATA)))
 		return false;
-	else
-		return true;
+
+	if (!strncmp(str, "Reserved-memblock", strlen("Reserved-memblock")))
+		return false;
+
+	return true;
 }
 
 int get_memory_ranges(struct memory_range **range, int *num_ranges,
---

With this patch, the kexec-tools will no longer exclude the Reserved-memblock regions, allowing the crash tool to access the necessary memory areas for analysis.

Thanks,
Pnina

>>
>> Thanks a lot,
>> Pnina
>>
>>>>> Upon inspection, we confirmed that the physical addresses corresponding to those virtual addresses are not present in the vmcore, as they fall under Reserved memory sections.
>>>>> We tested a patch to kexec-tools that prevents exclusion of the Reserved-memblock section from the vmcore. With this patch, the issue no longer occurs, and crash analysis succeeds.
>>>>> Note: I suspect the same issue exists on ARM64, as both the signal.c and kexec-tools implementations are similar.
>>>>>
>>>>>> Thanks!
>>>>>> Björn
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 0/1] Fix for riscv vmcore issue

[Alexandre Ghiti]

+cc Simon

On 7/16/25 13:05, Pnina Feder wrote:
> Hi Alex,
> Thank you for your response!
>
>> Hi Pnina,
>>
>> On 7/14/25 14:00, Pnina Feder wrote:
>>>>>> Hi Pnina,
>>>>>>> Pnina!
>>>>>>>
>>>>>>> Pnina Feder <pnina.feder@mobileye.com> writes:
>>>>>>>
>>>>>>>> We are creating a vmcore using kexec on a Linux 6.15 RISC-V
>>>>>>>> system and analyzing it with the crash tool on the host. This
>>>>>>>> workflow used to work on Linux 6.14 but is now broken in 6.15.
>>>>>>> Thanks for reporting this!
>>>>>>>
>>>>>>>> The issue is caused by a change in the kernel:
>>>>>>>> In Linux 6.15, certain memblock sections are now marked as
>>>>>>>> Reserved in /proc/iomem. The kexec tool excludes all Reserved
>>>>>>>> regions when generating the vmcore, so these sections are missing from the dump.
>>>>>>>> How are you collecting the /proc/vmcore file? A full set of commands would be helpful.
>>>>>> We’ve defined in our system that when a process crashes, we call panic().
>>>>>> To handle crash recovery, we're using kexec with the following command:
>>>>>> kexec -p /Image --initrd=/rootfs.cpio --append "console=${con} earlycon=${earlycon} no4lvl"
>>>>>>
>>>>>> To simulate crash, we trigger it using:
>>>>>> sleep 100 & kill -6 $!
>>>>>>
>>>>>> This boots into the crash kernel (kdump), where we then copy the /proc/vmcore file back to the host for analysis.
>>>>>>
>>>>>>>> However, the kernel still uses addresses in these regions—for
>>>>>>>> example, for IRQ pointers. Since the crash tool needs access to
>>>>>>>> these memory areas to function correctly, their exclusion breaks the analysis.
>>>>>>> Wdym with "IRQ pointers"? Also, what version (sha1) of crash are you using?
>>>>>>>
>>>>>>> We are currently using crash-utility version 9.0.0 (master).
>>>>>>>    From the crash analysis logs, we observed errors like:
>>>>>>>
>>>>>> "......
>>>>>> IRQ stack pointer[0] is  ffffffd6fbdcc068
>>>>>>> crash: read error: kernel virtual address: ffffffd6fbdcc068  type: "IRQ stack pointer"
>>>>>> .....
>>>>>>
>>>>>>> <read_kdump: addr: ffffffff80edf1cc paddr: 8010df1cc cnt: 4>
>>>>>> <readmem: ffffffd6fbdd6880, KVADDR, "runqueues entry (per_cpu)",
>>>>>> 3456, (FOE), 55acf03963e0>
>>>>>>> read_kdump: addr: ffffffd6fbdd6880 paddr: 8fbdd6880 cnt: 1920<
>>>>>> crash: read error: kernel virtual address: ffffffd6fbdd6880  type: "runqueues entry (per_cpu)"
>>>>> I can't reproduce this issue on qemu, booting with sv39. I'm using the latest kexec-tools (which recently merged riscv .support), crash 9.0.0 and kernel 6.16.0-rc4. Note that I'm using crash in qemu.
>>>>>
>>>>> Are you able to reproduce this on qemu too?
>>>> Yes, I am using qemu too on main and crash kernel, with latest
>>>> kexec-tools, crash 9.0.0 and kernel 6.15
>>>>
>>>>
>>>>> Maybe that's related to the config, can you share your config?
>>>> this is my dev_config
>>>>
>>>> CONFIG_SYSVIPC=y
>>>> CONFIG_POSIX_MQUEUE=y
>>>> CONFIG_AUDIT=y
>>>> CONFIG_NO_HZ_IDLE=y
>>>> CONFIG_HIGH_RES_TIMERS=y
>>>> CONFIG_BPF_SYSCALL=y
>>>> CONFIG_PREEMPT_RT=y
>>>> CONFIG_TASKSTATS=y
>>>> CONFIG_TASK_DELAY_ACCT=y
>>>> CONFIG_PSI=y
>>>> CONFIG_IKCONFIG=y
>>>> CONFIG_IKCONFIG_PROC=y
>>>> CONFIG_CGROUPS=y
>>>> CONFIG_MEMCG=y
>>>> CONFIG_CGROUP_SCHED=y
>>>> CONFIG_CFS_BANDWIDTH=y
>>>> CONFIG_RT_GROUP_SCHED=y
>>>> CONFIG_CGROUP_PIDS=y
>>>> CONFIG_CGROUP_FREEZER=y
>>>> CONFIG_CGROUP_HUGETLB=y
>>>> CONFIG_CPUSETS=y
>>>> CONFIG_CGROUP_DEVICE=y
>>>> CONFIG_CGROUP_CPUACCT=y
>>>> CONFIG_CGROUP_PERF=y
>>>> CONFIG_CGROUP_BPF=y
>>>> CONFIG_NAMESPACES=y
>>>> CONFIG_USER_NS=y
>>>> CONFIG_CHECKPOINT_RESTORE=y
>>>> CONFIG_BLK_DEV_INITRD=y
>>>> CONFIG_EXPERT=y
>>>> CONFIG_PROFILING=y
>>>> CONFIG_KEXEC=y
>>>> CONFIG_ARCH_VIRT=y
>>>> CONFIG_NONPORTABLE=y
>>>> CONFIG_SMP=y
>>>> CONFIG_NR_CPUS=32
>>>> CONFIG_HZ_1000=y
>>>> CONFIG_CPU_IDLE=y
>>>> CONFIG_MODULES=y
>>>> CONFIG_MODULE_UNLOAD=y
>>>> CONFIG_IOSCHED_BFQ=y
>>>> CONFIG_PAGE_REPORTING=y
>>>> CONFIG_PERCPU_STATS=y
>>>> CONFIG_NET=y
>>>> CONFIG_PACKET=y
>>>> CONFIG_UNIX=y
>>>> CONFIG_XFRM_USER=m
>>>> CONFIG_INET=y
>>>> CONFIG_IP_MULTICAST=y
>>>> CONFIG_IP_ADVANCED_ROUTER=y
>>>> CONFIG_INET_ESP=m
>>>> CONFIG_NETWORK_SECMARK=y
>>>> CONFIG_NETFILTER=y
>>>> CONFIG_IP_NF_IPTABLES=y
>>>> CONFIG_IP_NF_FILTER=y
>>>> CONFIG_BRIDGE=m
>>>> CONFIG_BRIDGE_VLAN_FILTERING=y
>>>> CONFIG_VLAN_8021Q=m
>>>> CONFIG_NET_SCHED=y
>>>> CONFIG_NET_CLS_CGROUP=m
>>>> CONFIG_NETLINK_DIAG=y
>>>> CONFIG_NET_L3_MASTER_DEV=y
>>>> CONFIG_CGROUP_NET_PRIO=y
>>>> CONFIG_FAILOVER=y
>>>> CONFIG_DEVTMPFS=y
>>>> CONFIG_DEVTMPFS_MOUNT=y
>>>> CONFIG_MTD=y
>>>> CONFIG_MTD_BLOCK=y
>>>> CONFIG_MTD_CFI=y
>>>> CONFIG_MTD_CFI_INTELEXT=y
>>>> CONFIG_MTD_PHYSMAP=y
>>>> CONFIG_MTD_PHYSMAP_OF=y
>>>> CONFIG_BLK_DEV_LOOP=y
>>>> CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
>>>> CONFIG_VIRTIO_BLK=y
>>>> CONFIG_SCSI=y
>>>> CONFIG_BLK_DEV_SD=y
>>>> CONFIG_SCSI_VIRTIO=y
>>>> CONFIG_MD=y
>>>> CONFIG_BLK_DEV_DM=y
>>>> CONFIG_NETDEVICES=y
>>>> CONFIG_MACB=y
>>>> CONFIG_PCS_XPCS=m
>>>> CONFIG_SERIO_LIBPS2=y
>>>> CONFIG_VT_HW_CONSOLE_BINDING=y
>>>> CONFIG_LEGACY_PTY_COUNT=16
>>>> CONFIG_SERIAL_8250=y
>>>> CONFIG_SERIAL_8250_CONSOLE=y
>>>> CONFIG_SERIAL_OF_PLATFORM=y
>>>> CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
>>>> CONFIG_VIRTIO_CONSOLE=y
>>>> CONFIG_HW_RANDOM=y
>>>> CONFIG_HW_RANDOM_VIRTIO=y
>>>> CONFIG_I2C=y
>>>> CONFIG_I2C_DESIGNWARE_CORE=y
>>>> CONFIG_SPI=y
>>>> CONFIG_PINCTRL=y
>>>> CONFIG_PINCTRL_SINGLE=y
>>>> CONFIG_GPIOLIB=y
>>>> CONFIG_GPIO_SYSFS=y
>>>> CONFIG_GPIO_DWAPB=y
>>>> CONFIG_GPIO_SIFIVE=y
>>>> CONFIG_POWER_SUPPLY=y
>>>> CONFIG_WATCHDOG=y
>>>> CONFIG_WATCHDOG_CORE=y
>>>> CONFIG_REGULATOR=y
>>>> CONFIG_REGULATOR_FIXED_VOLTAGE=y
>>>> CONFIG_BACKLIGHT_CLASS_DEVICE=m
>>>> CONFIG_SCSI_UFSHCD=y
>>>> CONFIG_SCSI_UFSHCD_PLATFORM=y
>>>> CONFIG_SCSI_UFS_DWC_TC_PLATFORM=y
>>>> CONFIG_RTC_CLASS=y
>>>> CONFIG_RTC_DRV_M41T80=y
>>>> CONFIG_DMADEVICES=y
>>>> CONFIG_SYNC_FILE=y
>>>> CONFIG_COMMON_CLK_EYEQ=y
>>>> CONFIG_RPMSG_CHAR=y
>>>> CONFIG_RPMSG_CTRL=y
>>>> CONFIG_RPMSG_VIRTIO=y
>>>> CONFIG_RESET_CONTROLLER=y
>>>> CONFIG_RESET_SIMPLE=y
>>>> CONFIG_GENERIC_PHY=y
>>>> CONFIG_EXT4_FS=y
>>>> CONFIG_EXT4_FS_POSIX_ACL=y
>>>> CONFIG_EXT4_FS_SECURITY=y
>>>> CONFIG_MSDOS_FS=y
>>>> CONFIG_VFAT_FS=y
>>>> CONFIG_TMPFS=y
>>>> CONFIG_TMPFS_POSIX_ACL=y
>>>> CONFIG_HUGETLBFS=y
>>>> CONFIG_KEYS=y
>>>> CONFIG_SECURITY=y
>>>> CONFIG_SECURITYFS=y
>>>> CONFIG_SECURITY_NETWORK=y
>>>> CONFIG_SECURITY_PATH=y
>>>> CONFIG_CRYPTO_RSA=y
>>>> CONFIG_CRYPTO_ECB=y
>>>> CONFIG_CRYPTO_BLAKE2B=m
>>>> CONFIG_CRYPTO_XXHASH=m
>>>> CONFIG_CRYPTO_USER_API_HASH=y
>>>> CONFIG_CRC_CCITT=m
>>>> CONFIG_CRC_ITU_T=y
>>>> CONFIG_CRC7=y
>>>> CONFIG_LIBCRC32C=m
>>>> CONFIG_PRINTK_TIME=y
>>>> CONFIG_DYNAMIC_DEBUG=y
>>>> CONFIG_DEBUG_INFO_DWARF5=y
>>>> CONFIG_DEBUG_FS=y
>>>> CONFIG_DEBUG_PAGEALLOC=y
>>>> CONFIG_PTDUMP_DEBUGFS=y
>>>> CONFIG_SCHED_STACK_END_CHECK=y
>>>> CONFIG_DEBUG_VM=y
>>>> CONFIG_DEBUG_VM_PGFLAGS=y
>>>> CONFIG_DEBUG_MEMORY_INIT=y
>>>> CONFIG_DEBUG_PER_CPU_MAPS=y
>>>> CONFIG_SOFTLOCKUP_DETECTOR=y
>>>> CONFIG_WQ_WATCHDOG=y
>>>> CONFIG_DEBUG_RT_MUTEXES=y
>>>> CONFIG_DEBUG_SPINLOCK=y
>>>> CONFIG_DEBUG_ATOMIC_SLEEP=y
>>>> CONFIG_DEBUG_LIST=y
>>>> CONFIG_DEBUG_PLIST=y
>>>> CONFIG_DEBUG_SG=y
>>>> CONFIG_RCU_EQS_DEBUG=y
>>>> CONFIG_MEMTEST=y
>>>>
>>>>>> These failures occur consistently for addresses in the 0xffffffd000000000 region.
>>>>> FYI, this region is the direct mapping (see Documentation/arch/riscv/vm-layout.rst).
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Alex
>>>>>
>>> Hi Alex!
>>>
>>> Do I have something to try or help to process this issue?
>>> maybe, can you give your Config and I will try it on my system?
>>> Any more information I can share?
>>
>> So I'm able to reproduce your issue with your config, it only happens with kexec_load(), not kexec_file_load().
>>
>> Your patch does not fix the problem for me, makedumpfile still fails. I spent quite some time looking for the code that parses the memory regions and exposes them as PT_LOAD segments in vmcore, but I did not find it, do you know where that happens for kexec_load()?
>>
>> Thanks,
>>
>> Alex
>>
>>
> The code that parses memory regions is located in kexec-tools.


Damn, I was not looking there!


>
> To fix the issue with missing memory regions in the vmcore, we need to ensure that kexec-tools does not exclude the Reserved-memblock sections when generating ELF headers for kexec_load().


I'm still not in favor with this solution, that does not sound right.

I think we should not exclude the "Reserved" regions which lie inside 
"System RAM" region. The problem is that we mark "nomap" regions as 
"Reserved" too, I would say this is where we are wrong: "nomap" regions 
don't even have direct mapping, so they should be presented as a hole 
rather than "Reserved". And that would allow us to not exclude the 
"Reserved" regions.

@Simon, @Pnina WDYT?

Thanks,

Alex


>
> I’ve added a patch to handle this, and plan to submit it upstream to kexec-tools once this approach is confirmed and approved.
>
> Kexec-tools patch:
> ---
> diff --git a/kexec/arch/riscv/kexec-riscv.c b/kexec/arch/riscv/kexec-riscv.c
> index f34b468..1a93b51 100644
> --- a/kexec/arch/riscv/kexec-riscv.c
> +++ b/kexec/arch/riscv/kexec-riscv.c
> @@ -421,8 +421,11 @@ static bool to_be_excluded(char *str, unsigned long long start, unsigned long lo
>   	    !strncmp(str, KERNEL_CODE, strlen(KERNEL_CODE)) ||
>   	    !strncmp(str, KERNEL_DATA, strlen(KERNEL_DATA)))
>   		return false;
> -	else
> -		return true;
> +
> +	if (!strncmp(str, "Reserved-memblock", strlen("Reserved-memblock")))
> +		return false;
> +
> +	return true;
>   }
>   
>   int get_memory_ranges(struct memory_range **range, int *num_ranges,
> ---
>
> With this patch, the kexec-tools will no longer exclude the Reserved-memblock regions, allowing the crash tool to access the necessary memory areas for analysis.
>
> Thanks,
> Pnina
>
>>> Thanks a lot,
>>> Pnina
>>>
>>>>>> Upon inspection, we confirmed that the physical addresses corresponding to those virtual addresses are not present in the vmcore, as they fall under Reserved memory sections.
>>>>>> We tested a patch to kexec-tools that prevents exclusion of the Reserved-memblock section from the vmcore. With this patch, the issue no longer occurs, and crash analysis succeeds.
>>>>>> Note: I suspect the same issue exists on ARM64, as both the signal.c and kexec-tools implementations are similar.
>>>>>>
>>>>>>> Thanks!
>>>>>>> Björn
>>> _______________________________________________
>>> linux-riscv mailing list
>>> linux-riscv@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-riscv

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 0/1] Fix for riscv vmcore issue

[Nick Kossifidis]

On 7/16/25 14:47, Alexandre Ghiti wrote:
> 
> 
> I'm still not in favor with this solution, that does not sound right.
> 
> I think we should not exclude the "Reserved" regions which lie inside 
> "System RAM" region. The problem is that we mark "nomap" regions as 
> "Reserved" too, I would say this is where we are wrong: "nomap" regions 
> don't even have direct mapping, so they should be presented as a hole 
> rather than "Reserved". And that would allow us to not exclude the 
> "Reserved" regions.
> 
> @Simon, @Pnina WDYT?
> 
> Thanks,
> 
> Alex
> 
> 
NOMAP means the region is reserved:

https://elixir.bootlin.com/linux/v6.16-rc6/source/include/linux/memblock.h#L36

* @MEMBLOCK_NOMAP: don't add to kernel direct mapping and treat as
* reserved in the memory map; refer to memblock_mark_nomap() description
* for further details

https://elixir.bootlin.com/linux/v6.16-rc6/source/mm/memblock.c#L1060

* The memory regions marked with %MEMBLOCK_NOMAP will not be added to the
* direct mapping of the physical memory. These regions will still be
* covered by the memory map. The struct page representing NOMAP memory
* frames in the memory map will be PageReserved()
*
* Note: if the memory being marked %MEMBLOCK_NOMAP was allocated from
* memblock, the caller must inform kmemleak to ignore that memory

This is also what ARM64 does btw:

https://elixir.bootlin.com/linux/v6.16-rc6/source/arch/arm64/kernel/setup.c#L230


Sorry I didn't review this earlier...

* In the original kexec-tools port I added a function 
dtb_get_memory_ranges that parsed the device tree (either through 
/sys/firmware/fdt, or a user-provided one) for memory regions, including 
reserved memory regions added there e.g. by OpenSBI. This works better 
than using /proc/iomem, since /proc/iomem captures the memory layout of 
the running system, not the system we are going to boot to, and also 
/proc/iomem is not a standardized interface, which was yet another 
reason I wanted to avoid using it. I can further argue why that approach 
is better but it's a bit off topic here, and since we now have EFI in 
play it needed review anyway (when I wrote that we didn't have ACPI/EFI 
support, things were nice and clean). The thing is I'd prefer if there 
was still an option to use it, the function was upstreamed but it's not 
called anymore, please fix that, not everyone uses ACPI/EFI or cares 
about it (actually almost all RISC-V systems I've seen in production use 
a device tree). In our use cases where we e.g. swap accelerators on 
FPGAs this approach is much simpler to follow and implement, than having 
to re-generate ACPI tables for our target system everytime (that will 
have a new accelerator in place with its own reserved regions etc, that 
we don't want to overlap with e.g. initrd or the kernel image). Also 
keep in mind that kexec is not there just for kdump, it's a very useful 
feature for other use cases as well.


* For creating the elfcorehdr for kdump (that ends up being used for 
/proc/vmcore in the crashkernel), we obviously need runtime information 
from the running kernel (the one we want to analyze if it crashes), so 
the device tree couldn't obviously provide that, the standardized 
interface was supposed to be /proc/kcore, but that's also a security 
mess and is considered obsolete as far as I know (back when I was 
working on that I remember it was considered for removal). Which is why 
I used /proc/iomem and /proc/kallsyms in load_elfcorehdr like other 
archs do on kexec-tools, to determine the address of specific symbols to 
populate struct crash_elf_info, and also exclude the range of the 
crashkernel allocated at runtime (which I also exported via 
/proc/iomem). I still used the memory regions from the device tree 
(info->memory_ranges populated via dtb_get_memory_ranges) which meant 
that everything was there.


* When the code changed to rely only on /proc/iomem, although 
get_memory_ranges was changed, load_elfcorehdr and the regions exported 
via /proc/iomem remained the same. In the device tree scenario this 
still worked, since init_resources exposed basically the same regions as 
in the device tree. It should also work for the EFI scenario, by the 
time we reach init_resources we've already called efi_init -> 
reserve_regions, so we'll add both reserved and nomap regions there. For 
the soft-reserved regions we didn't add in efi_init, we add them later 
on in riscv_enable_runtime_services as "Soft Reserved" resources. I 
don't see why we need to add an arch initcall to run after that on 
resources we already added (on init_resources btw, ignoring those added 
by riscv_enable_runtime_services). Why do we need to do that ? Note that 
init_resources does two passes unlike arm64's approach, so it should 
handle overlapping regions properly.

Am I missing something ?

Regards,
Nick

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 1/1] riscv: Change memblock reserved name to be recognized on kexec

[Pnina Feder]

memblock resreved exposes as Reserved on iomem,
kexec tool doesn't take those parts to vmcore, but
the kernel use those address and it needed when opening the vmcore.
Without this fix the crash-tool fails.

Fixes: e94eb7ea6f20 ("riscv: Properly export reserved regions in /proc/iomem")
Signed-off-by: Pnina Feder <pnina.feder@mobileye.com>
---
 arch/riscv/kernel/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 14888e5ea19a..16e0cebed170 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -249,7 +249,7 @@ static int __init reserve_memblock_reserved_regions(void)
 			if (start > mem->end || end < mem->start)
 				continue;
 
-			reserve_region_with_split(mem, start, end, "Reserved");
+			reserve_region_with_split(mem, start, end, "Reserved-memblock");
 		}
 	}
 
-- 
2.43.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv