[PATCH] dt-bindings: Correct paths in Rockchip power domains binding document

[PATCH] dt-bindings: Correct paths in Rockchip power domains binding document

[Geert Uytterhoeven]

Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
 Documentation/devicetree/bindings/soc/rockchip/power_domain.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
index 4be34188afe41029..112756e11802c7cc 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
+++ b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
@@ -13,7 +13,7 @@ Required properties for power domain controller:
 
 Required properties for power domain sub nodes:
 - reg: index of the power domain, should use macros in:
-	"include/dt-bindings/power-domain/rk3288.h" - for RK3288 type power domain.
+	"include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
 - clocks (optional): phandles to clocks which need to be enabled while power domain
 	switches state.
 
@@ -35,7 +35,7 @@ Node of a device using power domains must have a power-domains property,
 containing a phandle to the power device node and an index specifying which
 power domain to use.
 The index should use macros in:
-	"include/dt-bindings/power-domain/rk3288.h" - for rk3288 type power domain.
+	"include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
 
 Example of the node using power domain:
 
-- 
1.9.1

Re: [PATCH] dt-bindings: Correct paths in Rockchip power domains binding document

[Heiko Stübner]

Hi Geert,

Am Freitag, 16. Oktober 2015, 16:11:41 schrieb Geert Uytterhoeven:
> Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/soc/rockchip/power_domain.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Thanks for catching this. I've applied it to my drivers branch with the other 
fixes.


Thanks
Heiko