From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Heiko Stuebner <heiko@sntech.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Lee Jones <lee@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Alessandro Zummo <a.zummo@towertech.it>,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sebastian Reichel <sebastian.reichel@collabora.com>,
kernel@collabora.com
Subject: [PATCHv2 08/13] dt-bindings: mfd: add rk806 binding
Date: Thu, 8 Sep 2022 02:31:02 +0200 [thread overview]
Message-ID: <20220908003107.220143-9-sebastian.reichel@collabora.com> (raw)
In-Reply-To: <20220908003107.220143-1-sebastian.reichel@collabora.com>
Add DT binding document for Rockchip's RK806 PMIC.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
.../bindings/mfd/rockchip,rk806.yaml | 388 ++++++++++++++++++
1 file changed, 388 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
new file mode 100644
index 000000000000..80216440bd9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
@@ -0,0 +1,388 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk806.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK806 Power Management Integrated Circuit
+
+maintainers:
+ - Sebastian Reichel <sebastian.reichel@collabora.com>
+
+description: |
+ Rockchip RK806 series PMIC. This device consists of an spi or
+ i2c controlled MFD that includes multiple switchable regulators.
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk806
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ vcc1-supply:
+ description:
+ The input supply for dcdc-reg1.
+
+ vcc2-supply:
+ description:
+ The input supply for dcdc-reg2.
+
+ vcc3-supply:
+ description:
+ The input supply for dcdc-reg3.
+
+ vcc4-supply:
+ description:
+ The input supply for dcdc-reg4.
+
+ vcc5-supply:
+ description:
+ The input supply for dcdc-reg5.
+
+ vcc6-supply:
+ description:
+ The input supply for dcdc-reg6.
+
+ vcc7-supply:
+ description:
+ The input supply for dcdc-reg7.
+
+ vcc8-supply:
+ description:
+ The input supply for dcdc-reg8.
+
+ vcc9-supply:
+ description:
+ The input supply for dcdc-reg9.
+
+ vcc10-supply:
+ description:
+ The input supply for dcdc-reg10.
+
+ vcc11-supply:
+ description:
+ The input supply for pldo-reg1, pldo-reg2 and pldo-reg3.
+
+ vcc12-supply:
+ description:
+ The input supply for pldo-reg4 and pldo-reg5.
+
+ vcc13-supply:
+ description:
+ The input supply for nldo-reg1, nldo-reg2 and nldo-reg3.
+
+ vcc14-supply:
+ description:
+ The input supply for nldo-reg4 and nldo-reg5.
+
+ vcca-supply:
+ description:
+ The input supply for pldo-reg6.
+
+ regulators:
+ type: object
+ patternProperties:
+ "^(dcdc-reg([1-9]|10)|[pn]ldo_reg[1-6])$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/rockchip.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ reg = <0x0>;
+
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc5v0_sys>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ regulators {
+ vdd_gpu_s0: dcdc-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_npu_s0: dcdc-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_npu_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_log_s0";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_vdenc_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu_mem_s0: dcdc-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_gpu_mem_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_npu_mem_s0: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_npu_mem_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_2v0_pldo_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vdd_vdenc_mem_s0: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_vdenc_mem_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v1_nldo_s3: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vcc_1v1_nldo_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1100000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "avcc_1v8_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd1_1v8_ddr_s3: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd1_1v8_ddr_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_1v8_s3: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vcc_1v8_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vcc_3v3_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vccio_sd_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ master_pldo6_s3: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "master_pldo6_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_0v75_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd2l_0v9_ddr_s3: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdd2l_0v9_ddr_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ master_nldo3: nldo-reg3 {
+ regulator-name = "master_nldo3";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "avdd_0v75_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v85_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_0v85_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+ };
--
2.35.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2022-09-08 0:31 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-08 0:30 [PATCHv2 00/13] Introduce RK806 Support Sebastian Reichel
2022-09-08 0:30 ` [PATCHv2 01/13] mfd: rk808: convert to device managed resources Sebastian Reichel
2022-09-08 0:30 ` [PATCHv2 02/13] mfd: rk808: use dev_err_probe Sebastian Reichel
2022-09-08 8:45 ` Robin Murphy
2022-09-08 0:30 ` [PATCHv2 03/13] clk: RK808: reduce 'struct rk808' usage Sebastian Reichel
2022-09-08 0:30 ` [PATCHv2 04/13] regulator: rk808: " Sebastian Reichel
2022-09-08 0:30 ` [PATCHv2 05/13] rtc: " Sebastian Reichel
2022-09-08 0:31 ` [PATCHv2 06/13] mfd: rk808: replace 'struct i2c_client' with 'struct device' Sebastian Reichel
2022-09-08 0:31 ` [PATCHv2 07/13] mfd: rk808: split into core and i2c Sebastian Reichel
2022-09-08 0:31 ` Sebastian Reichel [this message]
2022-09-08 8:51 ` [PATCHv2 08/13] dt-bindings: mfd: add rk806 binding Krzysztof Kozlowski
2022-09-08 12:35 ` Rob Herring
2022-09-08 0:31 ` [PATCHv2 09/13] mfd: rk8xx: add rk806 support Sebastian Reichel
2022-09-08 0:31 ` [PATCHv2 10/13] pinctrl: rk805: add rk806 pinctrl support Sebastian Reichel
2022-09-08 0:31 ` [PATCHv2 11/13] regulator: rk808: Use dev_err_probe Sebastian Reichel
2022-09-08 0:31 ` [PATCHv2 12/13] regulator: rk808: add rk806 support Sebastian Reichel
2022-09-08 7:45 ` Matti Vaittinen
2022-09-08 11:31 ` Mark Brown
2022-09-08 0:31 ` [PATCHv2 13/13] ASoC: rk817: Remove 'select REGMAP_I2C' Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220908003107.220143-9-sebastian.reichel@collabora.com \
--to=sebastian.reichel@collabora.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=kernel@collabora.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox