[PATCH v4 0/5] Add more RK3326 gaming handhelds

[PATCH v4 0/5] Add more RK3326 gaming handhelds

[Maya Matuszczyk]

This patch series adds Odroid Go Advance, Odroid Go Super(without
display) and Anbernic RG351M.

RG351P uses almost the same motherboard, and I'm not sure how to handle
it. RG351P DTS file would look exactly the same, aside name change.

--

Changes from V3:
- Changed go3's volume buttons to not re-use builtin controller dt node
- Addressed Krzysztof Kozlowski's comments - removed status = "okay"
  where it's not needed, and added a commit message to patch adding dt
  bindings.
- Addressed Chris Morgan's comments - removed battery node from RG351M
- Added a cover letter even harder

Changes from V2:
- Fixed a typo
- Added "v3" tag, sorry!
- Added the cover letter in a way that shouldn't get swallowed by gmail
  this time

Changes from V1:
- Addressed Chris Morgan's comments
- Added RG351M
- Added RG351M and Odroid Go Super

--

Maya Matuszczyk (5):
  arm64: dts: rockchip: Move most of Odroid Go Advance DTS into a DTSI
  dt-bindings: arm: rockchip: Add more RK3326 devices
  arm64: dts: rockchip: Add Odroid Go Advance Black Edition
  arm64: dts: rockchip: Add Odroid Go Super
  arm64: dts: rockchip: Add Anbernic RG351M

 .../devicetree/bindings/arm/rockchip.yaml     |  25 +
 arch/arm64/boot/dts/rockchip/Makefile         |   3 +
 .../dts/rockchip/rk3326-anbernic-rg351m.dts   |  33 +
 .../boot/dts/rockchip/rk3326-odroid-go.dtsi   | 600 +++++++++++++++++
 .../dts/rockchip/rk3326-odroid-go2-v11.dts    | 156 +++++
 .../boot/dts/rockchip/rk3326-odroid-go2.dts   | 620 +-----------------
 .../boot/dts/rockchip/rk3326-odroid-go3.dts   | 185 ++++++
 7 files changed, 1011 insertions(+), 611 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts

-- 
2.38.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v4 1/5] arm64: dts: rockchip: Move most of Odroid Go Advance DTS into a DTSI

[Maya Matuszczyk]

To support more devices that are clones of this device or minor
revisions without duplication move msot of go2's dts into a dtsi file.

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
---
 .../boot/dts/rockchip/rk3326-odroid-go.dtsi   | 600 +++++++++++++++++
 .../boot/dts/rockchip/rk3326-odroid-go2.dts   | 620 +-----------------
 2 files changed, 609 insertions(+), 611 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi

diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
new file mode 100644
index 000000000000..fbc6bfbaa5c1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
@@ -0,0 +1,600 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	builtin_gamepad: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&btn_pins>;
+
+		button-sw1 {
+			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+		button-sw2 {
+			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+		button-sw3 {
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+		button-sw4 {
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+		button-sw5 {
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+		button-sw6 {
+			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+		button-sw7 {
+			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+		button-sw8 {
+			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+		btn_f1: button-sw9 {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+		};
+		btn_f2: button-sw10 {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+		};
+		btn_f3: button-sw11 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+		};
+		btn_f4: button-sw12 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+		};
+		btn_f5: button-sw13 {
+			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+		};
+		btn_f6: button-sw14 {
+			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+		};
+		button-sw15 {
+			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "TOP-LEFT";
+			linux,code = <BTN_TL>;
+		};
+		button-sw16 {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "TOP-RIGHT";
+			linux,code = <BTN_TR>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blue_led_pin>;
+
+		blue_led: led-0 {
+			label = "blue:heartbeat";
+			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Analog";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_host: vcc_host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&usb_midu>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
+		<&cru PLL_CPLL>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>,
+		<17000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	internal_display: panel@0 {
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		vdd-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S1_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+		vcc8-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-name = "vcc_bl";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-name = "vcc_lcd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			LDO_REG9 {
+				/* unused */
+			};
+
+			usb_midu: BOOST {
+				regulator-name = "usb_midu";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+
+		rk817_charger: charger {
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <300000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+
+		rk817_codec: codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+/* I2S 1 Channel Used */
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		blue_led_pin: blue-led-pin {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index 72899a714310..4702183b673c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -2,30 +2,21 @@
 /*
  * Copyright (c) 2019 Hardkernel Co., Ltd
  * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
  */
 
 /dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include "rk3326.dtsi"
+#include "rk3326-odroid-go.dtsi"
 
 / {
 	model = "ODROID-GO Advance";
 	compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
 
-	aliases {
-		mmc0 = &sdmmc;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	adc-joystick {
+	analog_sticks: adc-joystick {
 		compatible = "adc-joystick";
 		io-channels = <&saradc 1>,
 			      <&saradc 2>;
+		poll-interval = <60>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -46,12 +37,6 @@ axis@1 {
 		};
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		power-supply = <&vcc_bl>;
-		pwms = <&pwm1 0 25000 0>;
-	};
-
 	battery: battery {
 		compatible = "simple-battery";
 		charge-full-design-microamp-hours = <3000000>;
@@ -63,606 +48,19 @@ battery: battery {
 		voltage-min-design-microvolt = <3500000>;
 
 		ocv-capacity-celsius = <20>;
-		ocv-capacity-table-0 =	<4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
 					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
 					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
 					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
 					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
 					<3574170 0>;
 	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&btn_pins>;
-
-		/*
-		 *      *** ODROIDGO2-Advance Switch layout ***
-		 * |------------------------------------------------|
-		 * | sw15                                      sw16 |
-		 * |------------------------------------------------|
-		 * |     sw1      |-------------------|      sw8    |
-		 * |  sw3   sw4   |                   |   sw7   sw5 |
-		 * |     sw2      |    LCD Display    |      sw6    |
-		 * |              |                   |             |
-		 * |              |-------------------|             |
-		 * |         sw9 sw10   sw11 sw12   sw13 sw14       |
-		 * |------------------------------------------------|
-		 */
-
-		button-sw1 {
-			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
-			label = "DPAD-UP";
-			linux,code = <BTN_DPAD_UP>;
-		};
-		button-sw2 {
-			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
-			label = "DPAD-DOWN";
-			linux,code = <BTN_DPAD_DOWN>;
-		};
-		button-sw3 {
-			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
-			label = "DPAD-LEFT";
-			linux,code = <BTN_DPAD_LEFT>;
-		};
-		button-sw4 {
-			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
-			label = "DPAD-RIGHT";
-			linux,code = <BTN_DPAD_RIGHT>;
-		};
-		button-sw5 {
-			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
-			label = "BTN-A";
-			linux,code = <BTN_EAST>;
-		};
-		button-sw6 {
-			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "BTN-B";
-			linux,code = <BTN_SOUTH>;
-		};
-		button-sw7 {
-			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
-			label = "BTN-Y";
-			linux,code = <BTN_WEST>;
-		};
-		button-sw8 {
-			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
-			label = "BTN-X";
-			linux,code = <BTN_NORTH>;
-		};
-		button-sw9 {
-			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
-			label = "F1";
-			linux,code = <BTN_TRIGGER_HAPPY1>;
-		};
-		button-sw10 {
-			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
-			label = "F2";
-			linux,code = <BTN_TRIGGER_HAPPY2>;
-		};
-		button-sw11 {
-			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
-			label = "F3";
-			linux,code = <BTN_TRIGGER_HAPPY3>;
-		};
-		button-sw12 {
-			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
-			label = "F4";
-			linux,code = <BTN_TRIGGER_HAPPY4>;
-		};
-		button-sw13 {
-			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
-			label = "F5";
-			linux,code = <BTN_TRIGGER_HAPPY5>;
-		};
-		button-sw14 {
-			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "F6";
-			linux,code = <BTN_TRIGGER_HAPPY6>;
-		};
-		button-sw15 {
-			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
-			label = "TOP-LEFT";
-			linux,code = <BTN_TL>;
-		};
-		button-sw16 {
-			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
-			label = "TOP-RIGHT";
-			linux,code = <BTN_TR>;
-		};
-	};
-
-	leds: gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&blue_led_pin>;
-
-		blue_led: led-0 {
-			label = "blue:heartbeat";
-			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	rk817-sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Analog";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Headphone", "Headphones",
-			"Speaker", "Speaker";
-		simple-audio-card,routing =
-			"MICL", "Mic Jack",
-			"Headphones", "HPOL",
-			"Headphones", "HPOR",
-			"Speaker", "SPKO";
-
-		simple-audio-card,codec {
-			sound-dai = <&rk817>;
-		};
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s1_2ch>;
-		};
-	};
-
-	vccsys: vccsys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v8_sys";
-		regulator-always-on;
-		regulator-min-microvolt = <3800000>;
-		regulator-max-microvolt = <3800000>;
-	};
-
-	vcc_host: vcc_host {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_host";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&usb_midu>;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu1 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu2 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cpu3 {
-	cpu-supply = <&vdd_arm>;
-};
-
-&cru {
-	assigned-clocks = <&cru PLL_NPLL>,
-		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
-		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
-		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
-		<&cru PLL_CPLL>;
-
-	assigned-clock-rates = <1188000000>,
-		<200000000>, <200000000>,
-		<150000000>, <150000000>,
-		<100000000>, <200000000>,
-		<17000000>;
 };
 
-&display_subsystem {
-	status = "okay";
+&internal_display {
+	compatible = "elida,kd35t133";
 };
 
-&dsi {
-	status = "okay";
-
-	ports {
-		mipi_out: port@1 {
-			reg = <1>;
-
-			mipi_out_panel: endpoint {
-				remote-endpoint = <&mipi_in_panel>;
-			};
-		};
-	};
-
-	panel@0 {
-		compatible = "elida,kd35t133";
-		reg = <0>;
-		backlight = <&backlight>;
-		iovcc-supply = <&vcc_lcd>;
-		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
-		rotation = <270>;
-		vdd-supply = <&vcc_lcd>;
-
-		port {
-			mipi_in_panel: endpoint {
-				remote-endpoint = <&mipi_out_panel>;
-			};
-		};
-	};
-};
-
-&dsi_dphy {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_logic>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-falling-time-ns = <16>;
-	i2c-scl-rising-time-ns = <280>;
-	status = "okay";
-
-	rk817: pmic@20 {
-		compatible = "rockchip,rk817";
-		reg = <0x20>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
-		clock-output-names = "rk808-clkout1", "xin32k";
-		clock-names = "mclk";
-		clocks = <&cru SCLK_I2S1_OUT>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
-		wakeup-source;
-		#clock-cells = <1>;
-		#sound-dai-cells = <0>;
-
-		vcc1-supply = <&vccsys>;
-		vcc2-supply = <&vccsys>;
-		vcc3-supply = <&vccsys>;
-		vcc4-supply = <&vccsys>;
-		vcc5-supply = <&vccsys>;
-		vcc6-supply = <&vccsys>;
-		vcc7-supply = <&vccsys>;
-		vcc8-supply = <&vccsys>;
-
-		regulators {
-			vdd_logic: DCDC_REG1 {
-				regulator-name = "vdd_logic";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <950000>;
-				};
-			};
-
-			vdd_arm: DCDC_REG2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <950000>;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_3v3: DCDC_REG4 {
-				regulator-name = "vcc_3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_1v8: LDO_REG2 {
-				regulator-name = "vcc_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vdd_1v0: LDO_REG3 {
-				regulator-name = "vdd_1v0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc3v3_pmu: LDO_REG4 {
-				regulator-name = "vcc3v3_pmu";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-name = "vccio_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_sd: LDO_REG6 {
-				regulator-name = "vcc_sd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_bl: LDO_REG7 {
-				regulator-name = "vcc_bl";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_lcd: LDO_REG8 {
-				regulator-name = "vcc_lcd";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <2800000>;
-				};
-			};
-
-			vcc_cam: LDO_REG9 {
-				regulator-name = "vcc_cam";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			usb_midu: BOOST {
-				regulator-name = "usb_midu";
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-
-		rk817_charger: charger {
-			monitored-battery = <&battery>;
-			rockchip,resistor-sense-micro-ohms = <10000>;
-			rockchip,sleep-enter-current-microamp = <300000>;
-			rockchip,sleep-filter-current-microamp = <100000>;
-		};
-
-		rk817_codec: codec {
-			rockchip,mic-in-differential;
-		};
-	};
-};
-
-/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
-&i2c1 {
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-/* I2S 1 Channel Used */
-&i2s1_2ch {
-	status = "okay";
-};
-
-&io_domains {
-	vccio1-supply = <&vcc_3v3>;
-	vccio2-supply = <&vccio_sd>;
-	vccio3-supply = <&vcc_3v3>;
-	vccio4-supply = <&vcc_3v3>;
-	vccio5-supply = <&vcc_3v3>;
-	vccio6-supply = <&vcc_3v3>;
-	status = "okay";
-};
-
-&pmu_io_domains {
-	pmuio1-supply = <&vcc3v3_pmu>;
-	pmuio2-supply = <&vcc3v3_pmu>;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcc_1v8>;
-	status = "okay";
-};
-
-&sdmmc {
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc_sd>;
-	vqmmc-supply = <&vccio_sd>;
-	status = "okay";
-};
-
-&sfc {
-	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
-	pinctrl-names = "default";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <108000000>;
-		spi-rx-bus-width = <2>;
-		spi-tx-bus-width = <1>;
-	};
-};
-
-&tsadc {
-	status = "okay";
-};
-
-&u2phy {
-	status = "okay";
-
-	u2phy_host: host-port {
-		status = "okay";
-	};
-
-	u2phy_otg: otg-port {
-		status = "disabled";
-	};
-};
-
-&usb20_otg {
-	status = "okay";
-};
-
-/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_xfer &uart1_cts>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2m1_xfer>;
-	status = "okay";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&pinctrl {
-	btns {
-		btn_pins: btn-pins {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
-					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
-					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	headphone {
-		hp_det: hp-det {
-			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	leds {
-		blue_led_pin: blue-led-pin {
-			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		dc_det: dc-det {
-			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pmic_int: pmic-int {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		soc_slppin_gpio: soc_slppin_gpio {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
-		};
-
-		soc_slppin_rst: soc_slppin_rst {
-			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
-		};
-
-		soc_slppin_slp: soc_slppin_slp {
-			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
-		};
-	};
+&rk817_charger {
+	monitored-battery = <&battery>;
 };
-- 
2.38.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v4 2/5] dt-bindings: arm: rockchip: Add more RK3326 devices

[Maya Matuszczyk]

This patch adds Anbernic RG351M, Odroid Go Advance Black Edition and
Odroid Go Super into dt bindings.

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
---
 .../devicetree/bindings/arm/rockchip.yaml         | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index c6c69a4e3777..d2748826cf39 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -30,6 +30,11 @@ properties:
           - const: amarula,vyasa-rk3288
           - const: rockchip,rk3288
 
+      - description: Anbernic RG351M
+        items:
+          - const: anbernic,rg351m
+          - const: rockchip,rk3326
+
       - description: Anbernic RG353P
         items:
           - const: anbernic,rg353p
@@ -468,6 +473,16 @@ properties:
           - const: hardkernel,rk3326-odroid-go2
           - const: rockchip,rk3326
 
+      - description: Hardkernel Odroid Go Advance Black Edition
+        items:
+          - const: hardkernel,rk3326-odroid-go2-v11
+          - const: rockchip,rk3326
+
+      - description: Hardkernel Odroid Go Super
+        items:
+          - const: hardkernel,rk3326-odroid-go3
+          - const: rockchip,rk3326
+
       - description: Hugsun X99 TV Box
         items:
           - const: hugsun,x99
-- 
2.38.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v4 3/5] arm64: dts: rockchip: Add Odroid Go Advance Black Edition

[Maya Matuszczyk]

This device is a minor revision of the origin Odroid Go Advance, with
added two more buttons and a WiFi card

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3326-odroid-go2-v11.dts    | 156 ++++++++++++++++++
 2 files changed, 157 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 8c15593c0ca4..12446f531d29 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
new file mode 100644
index 000000000000..139c898e590e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Advance Black Edition";
+	compatible = "hardkernel,rk3326-odroid-go2-v11", "rockchip,rk3326";
+
+	aliases {
+		mmc1 = &sdio;
+	};
+
+	analog_sticks: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 1>,
+			      <&saradc 2>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <172 772>;
+			linux,code = <ABS_X>;
+			};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <278 815>;
+			linux,code = <ABS_Y>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <180000>;
+		voltage-max-design-microvolt = <4100000>;
+		voltage-min-design-microvolt = <3500000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+					<3574170 0>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pins>;
+		reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&builtin_gamepad {
+	button-sw20 {
+		gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		label = "TOP-LEFT 2";
+		linux,code = <BTN_TL2>;
+	};
+	button-sw21 {
+		gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+		label = "TOP-RIGHT 2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&internal_display {
+	compatible = "elida,kd35t133";
+};
+
+&rk817 {
+	regulators {
+		vcc_wifi: LDO_REG9 {
+			regulator-name = "vcc_wifi";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-suspend-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&rk817_charger {
+	monitored-battery = <&battery>;
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&vcc_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	esp8089: wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_pwrseq_pins: wifi-pwrseq-pins {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB6 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
-- 
2.38.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v4 4/5] arm64: dts: rockchip: Add Odroid Go Super

[Maya Matuszczyk]

This device is another revision of Odroid Go Advance, with added two
volume buttons, a second analog stick and a bigger screen that isn't yet
supported in the mainline kernel.

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3326-odroid-go3.dts   | 185 ++++++++++++++++++
 2 files changed, 186 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 12446f531d29..142c83d2e5aa 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
new file mode 100644
index 000000000000..69aecc5c76b5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Super";
+	compatible = "hardkernel,rk3326-odroid-go3", "rockchip,rk3326";
+
+	joystick_mux_controller: mux-controller {
+		compatible = "gpio-mux";
+		pinctrl = <&mux_en_pins>;
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>,
+			    <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+
+	joystick_mux: adc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&saradc 1>;
+		io-channel-names = "parent";
+		#io-channel-cells = <1>;
+
+		mux-controls = <&joystick_mux_controller>;
+
+		channels = "0", "1", "2", "3";
+	};
+
+	analog_sticks: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&joystick_mux 0>,
+			      <&joystick_mux 1>,
+			      <&joystick_mux 2>,
+			      <&joystick_mux 3>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_RX>;
+		};
+		axis@2 {
+			reg = <2>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <4000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <180000>;
+		voltage-max-design-microvolt = <4100000>;
+		voltage-min-design-microvolt = <3500000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+					<3574170 0>;
+	};
+
+	gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-vol-down {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volume-up {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+/* f1 and f2 conflict with volume buttons */
+/delete-node/ &btn_f1;
+/delete-node/ &btn_f2;
+
+&builtin_gamepad {
+	button-sw19 {
+		gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+		label = "SELECT";
+		linux,code = <BTN_SELECT>;
+	};
+	/* note that TR2 and TL2 are swapped */
+	button-sw20 {
+		gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		label = "TOP-RIGHT 2";
+		linux,code = <BTN_TR2>;
+	};
+	button-sw21 {
+		gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+		label = "TOP-LEFT 2";
+		linux,code = <BTN_TL2>;
+	};
+	button-sw22 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "START";
+		linux,code = <BTN_START>;
+	};
+};
+
+&internal_display {
+	status = "disabled";
+};
+
+&rk817_charger {
+	monitored-battery = <&battery>;
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+	joystick {
+		mux_en_pins: mux-pins {
+			rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+};
-- 
2.38.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v4 5/5] arm64: dts: rockchip: Add Anbernic RG351M

[Maya Matuszczyk]

This device is a clone of Odroid Go Advance, with added PWM motor, internal
gamepad connected on USB instead of just having it be on GPIO + ADC, and
missing battery shunt resistor.
Due to missing shunt resistor and lack of a workaroun in rk817_charger
driver rk817_charger is not enabled in dts.

There's also an LED on GPIO 77(I *guess* PB5 on &gpio2),
that is controlled in a weird way:

- It is set to red by setting output value to 1
- Set to green by setting output value to 0
- Set to yellow by setting gpio direction to input

I have no idea how to describe that in DTS, without adding a custom
driver, for now it's just left out.

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |  1 +
 .../dts/rockchip/rk3326-anbernic-rg351m.dts   | 33 +++++++++++++++++++
 2 files changed, 34 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 142c83d2e5aa..b379516c15eb 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
new file mode 100644
index 000000000000..61b31688b469
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "Anbernic RG351M";
+	compatible = "anbernic,rg351m", "rockchip,rk3326";
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm0 0 1000000 0>;
+		pwm-names = "enable";
+	};
+};
+
+/delete-node/ &builtin_gamepad;
+/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
+
+&internal_display {
+	compatible = "elida,kd35t133";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+/delete-node/ &rk817_charger;
-- 
2.38.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v4 2/5] dt-bindings: arm: rockchip: Add more RK3326 devices

[Krzysztof Kozlowski]

On 17/11/2022 22:59, Maya Matuszczyk wrote:
> This patch adds Anbernic RG351M, Odroid Go Advance Black Edition and
> Odroid Go Super into dt bindings.
> 
> Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v4 0/5] Add more RK3326 gaming handhelds

[Heiko Stuebner]

On Thu, 17 Nov 2022 22:59:49 +0100, Maya Matuszczyk wrote:
> This patch series adds Odroid Go Advance, Odroid Go Super(without
> display) and Anbernic RG351M.
> 
> RG351P uses almost the same motherboard, and I'm not sure how to handle
> it. RG351P DTS file would look exactly the same, aside name change.
> 
> --
> 
> [...]

Applied, thanks!

[1/5] arm64: dts: rockchip: Move most of Odroid Go Advance DTS into a DTSI
      commit: 04ea3e30386e632c028654409e9a86c4c6b7accb
[2/5] dt-bindings: arm: rockchip: Add more RK3326 devices
      commit: 76eeb9b665d72ee53e5e93f154b23536f9d1c9c0
[3/5] arm64: dts: rockchip: Add Odroid Go Advance Black Edition
      commit: abba44b3e7c3f7530b607e8d2e2db96e6460fc73
[4/5] arm64: dts: rockchip: Add Odroid Go Super
      commit: 2f217d71aa89504abc9ab95286b807efaa03e11a
[5/5] arm64: dts: rockchip: Add Anbernic RG351M
      commit: 4e2347dbd618f88865408709cb7c06ab1f5f3f4a

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v4 0/5] Add more RK3326 gaming handhelds

[Chris Morgan]

On Tue, Nov 22, 2022 at 11:34:12PM +0100, Heiko Stuebner wrote:
> On Thu, 17 Nov 2022 22:59:49 +0100, Maya Matuszczyk wrote:
> > This patch series adds Odroid Go Advance, Odroid Go Super(without
> > display) and Anbernic RG351M.
> > 
> > RG351P uses almost the same motherboard, and I'm not sure how to handle
> > it. RG351P DTS file would look exactly the same, aside name change.
> > 
> > --
> > 
> > [...]
> 
> Applied, thanks!

Late to the party, sorry about that. For what it's worth I was able to
test this for the Odroid Go Advance at least and everything tested out
okay. I do see a potential sound regression that is unrelated to this
change I will have to chase down though...

Tested-by: Chris Morgan <macromorgan@hotmail.com>

> 
> [1/5] arm64: dts: rockchip: Move most of Odroid Go Advance DTS into a DTSI
>       commit: 04ea3e30386e632c028654409e9a86c4c6b7accb
> [2/5] dt-bindings: arm: rockchip: Add more RK3326 devices
>       commit: 76eeb9b665d72ee53e5e93f154b23536f9d1c9c0
> [3/5] arm64: dts: rockchip: Add Odroid Go Advance Black Edition
>       commit: abba44b3e7c3f7530b607e8d2e2db96e6460fc73
> [4/5] arm64: dts: rockchip: Add Odroid Go Super
>       commit: 2f217d71aa89504abc9ab95286b807efaa03e11a
> [5/5] arm64: dts: rockchip: Add Anbernic RG351M
>       commit: 4e2347dbd618f88865408709cb7c06ab1f5f3f4a
> 
> Best regards,
> -- 
> Heiko Stuebner <heiko@sntech.de>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip