[PATCH AUTOSEL 6.6 31/31] i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126

[PATCH AUTOSEL 6.6 31/31] i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126

[Sasha Levin]

From: Tim Lunn <tim@feathertop.org>

[ Upstream commit 92a85b7c6262f19c65a1c115cf15f411ba65a57c ]

Rockchip RV1126 is using old style i2c controller, the i2c2
bus uses a non-sequential offset in the grf register for the
mask/value bits for this bus.

This patch fixes i2c2 bus on rv1126 SoCs.

Signed-off-by: Tim Lunn <tim@feathertop.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-rk3x.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 4362db7c5789..086fdf262e7b 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -1295,8 +1295,12 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 			return -EINVAL;
 		}
 
-		/* 27+i: write mask, 11+i: value */
-		value = BIT(27 + bus_nr) | BIT(11 + bus_nr);
+		/* rv1126 i2c2 uses non-sequential write mask 20, value 4 */
+		if (i2c->soc_data == &rv1126_soc_data && bus_nr == 2)
+			value = BIT(20) | BIT(4);
+		else
+			/* 27+i: write mask, 11+i: value */
+			value = BIT(27 + bus_nr) | BIT(11 + bus_nr);
 
 		ret = regmap_write(grf, i2c->soc_data->grf_offset, value);
 		if (ret != 0) {
-- 
2.43.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip