From: Tianling Shen <cnsztl@gmail.com>
To: Jonas Karlman <jonas@kwiboo.se>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Chris Morgan <macromorgan@hotmail.com>,
Andy Yan <andyshrk@163.com>, Jagan Teki <jagan@edgeble.ai>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: rockchip: Add FriendlyARM NanoPi R3S board
Date: Wed, 23 Oct 2024 01:38:58 +0800 [thread overview]
Message-ID: <20241022173901.892190-1-cnsztl@gmail.com> (raw)
In-Reply-To: <13bb8657-f048-4f79-a2c1-3680445f2bef@kwiboo.se>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="us-ascii", Size: 26507 bytes --]
Hi Jonas,
On Wed, Oct 23, 2024 at 12:49 AM Jonas Karlman <jonas@kwiboo.se> wrote:
>
> Hi Tianling,
>
> On 2024-10-20 19:39, Tianling Shen wrote:
> > The NanoPi R3S(as "R3S") is an open source platform with dual-Gbps
> > Ethernet ports designed and developed by FriendlyElec for IoT
> > applications.
> >
> > Specification:
> > - Rockchip RK3566
> > - 2GB LPDDR4X RAM
> > - optional 32GB eMMC module
> > - SD card slot
> > - 2x 1000 Base-T
> > - 3x LEDs (POWER, LAN, WAN)
> > - 2x Buttons (Reset, MaskROM)
> > - 1x USB 3.0 Port
> > - Type-C 5V 2A Power
> >
> > Signed-off-by: Tianling Shen <cnsztl@gmail.com>
> > ---
> > arch/arm64/boot/dts/rockchip/Makefile | 1 +
> > .../boot/dts/rockchip/rk3566-nanopi-r3s.dts | 554 ++++++++++++++++++
> > 2 files changed, 555 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > index 8e1025cb5d20..e641033d23d1 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lckfb-tspi.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-nanopi-r3s.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
> > new file mode 100644
> > index 000000000000..951dd9bcb4b0
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
> > @@ -0,0 +1,554 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> > +/*
> > + * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
> > + *
> > + * Copyright (c) 2024 FriendlyElec Computer Tech. Co., Ltd.
> > + * (http://www.friendlyarm.com/
> > + *
> > + * Copyright (c) 2024 Tianling Shen <cnsztl@gmail.com>
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/leds/common.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > +#include <dt-bindings/soc/rockchip,vop2.h>
> > +#include "rk3566.dtsi"
> > +
> > +/ {
> > + model = "FriendlyARM NanoPi R3S";
>
> Please use the marketing name, and the name added in binding:
>
> FriendlyElec NanoPi R3S
Sorry for the copy & paste error, will fix it in new patch.
>
> > + compatible = "friendlyarm,nanopi-r3s", "rockchip,rk3566";
> > +
> > + aliases {
> > + ethernet0 = &gmac1;
> > + mmc0 = &sdmmc0;
> > + mmc1 = &sdhci;
>
> This board comes with on-board eMMC this please use mmc0 as alias for
> &sdhci; and mmc1 for sd-card.
Is using mmc0 for sdhci a common practice for eMMC boards?
The eMMC module on R3S is optional and users may get boards without it.
>
> > + };
> > +
> > + chosen: chosen {
> > + stdout-path = "serial2:1500000n8";
> > + };
> > +
> > + gpio-keys {
> > + compatible = "gpio-keys";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&reset_button_pin>;
> > +
> > + button-reset {
> > + label = "reset";
> > + gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
> > + linux,code = <KEY_RESTART>;
> > + debounce-interval = <50>;
> > + };
> > + };
> > +
> > + gpio-leds {
> > + compatible = "gpio-leds";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&power_led_pin>, <&lan_led_pin>, <&wan_led_pin>;
> > +
> > + power_led: led-0 {
> > + color = <LED_COLOR_ID_RED>;
> > + function = LED_FUNCTION_POWER;
> > + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> > + default-state = "on";
> > + };
> > +
> > + lan_led: led-1 {
> > + color = <LED_COLOR_ID_GREEN>;
> > + function = LED_FUNCTION_LAN;
> > + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + wan_led: led-2 {
> > + color = <LED_COLOR_ID_GREEN>;
> > + function = LED_FUNCTION_WAN;
> > + gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
> > + };
> > + };
> > +
> > + vdd_usbc: vdd-usbc-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vdd_usbc";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + };
> > +
> > + vcc5v0_sys: vcc5v0-sys-regulator {
>
> This and other fixed regulators does not match the recommended naming
> pattern: ^regulator-(.*)$, please rename fixed regulator nodes.
Soory I missed the dt-binding update, also thanks Heiko for renaming the
regulator nodes.
>
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc5v0_sys";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + vin-supply = <&vdd_usbc>;
> > + };
> > +
> > + vcc3v3_sys: vcc3v3-sys-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc3v3_sys";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + vin-supply = <&vcc5v0_sys>;
> > + };
> > +
> > + vcc5v0_usb: vcc5v0_usb-regulator {
> > + compatible = "regulator-fixed";
> > + enable-active-high;
> > + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&vcc5v0_usb_host_en>;
> > + regulator-name = "vcc5v0_usb";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + vin-supply = <&vcc5v0_sys>;
> > + };
> > +};
> > +
> > +&combphy1 {
> > + status = "okay";
> > +};
> > +
> > +&combphy2 {
> > + status = "okay";
> > +};
> > +
> > +&cpu0 {
> > + cpu-supply = <&vdd_cpu>;
> > +};
> > +
> > +&cpu1 {
> > + cpu-supply = <&vdd_cpu>;
> > +};
> > +
> > +&cpu2 {
> > + cpu-supply = <&vdd_cpu>;
> > +};
> > +
> > +&cpu3 {
> > + cpu-supply = <&vdd_cpu>;
> > +};
> > +
> > +&gmac1 {
> > + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
> > + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
> > + assigned-clock-rates = <0>, <125000000>;
> > + clock_in_out = "output";
> > + phy-mode = "rgmii-id";
> > + phy-handle = <&rgmii_phy1>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&gmac1m0_miim
> > + &gmac1m0_tx_bus2_level3
> > + &gmac1m0_rx_bus2
> > + &gmac1m0_rgmii_clk_level2
> > + &gmac1m0_rgmii_bus_level3>;
> > + snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
> > + snps,reset-active-low;
> > + /* Reset time is 20ms, 100ms for rtl8211f */
> > + snps,reset-delays-us = <0 20000 100000>;
>
> These snps,reset props is deprecated, please add reset props to the
> Ethernet PHY node.
Will fix it in new patch.
>
> > + status = "okay";
> > +};
> > +
> > +&gpu {
> > + mali-supply = <&vdd_gpu>;
> > + status = "okay";
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > +
> > + vdd_cpu: regulator@1c {
> > + compatible = "tcs,tcs4525";
> > + reg = <0x1c>;
> > + fcs,suspend-voltage-selector = <1>;
> > + regulator-name = "vdd_cpu";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <1150000>;
> > + regulator-ramp-delay = <2300>;
> > + vin-supply = <&vcc5v0_sys>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + rk809: pmic@20 {
> > + compatible = "rockchip,rk809";
> > + reg = <0x20>;
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> > + #clock-cells = <1>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pmic_int>;
> > + system-power-controller;
> > + vcc1-supply = <&vcc3v3_sys>;
> > + vcc2-supply = <&vcc3v3_sys>;
> > + vcc3-supply = <&vcc3v3_sys>;
> > + vcc4-supply = <&vcc3v3_sys>;
> > + vcc5-supply = <&vcc3v3_sys>;
> > + vcc6-supply = <&vcc3v3_sys>;
> > + vcc7-supply = <&vcc3v3_sys>;
> > + vcc8-supply = <&vcc3v3_sys>;
> > + vcc9-supply = <&vcc3v3_sys>;
> > + wakeup-source;
> > +
> > + regulators {
> > + vdd_logic: DCDC_REG1 {
> > + regulator-name = "vdd_logic";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-initial-mode = <0x2>;
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <1350000>;
> > + regulator-ramp-delay = <6001>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdd_gpu: DCDC_REG2 {
> > + regulator-name = "vdd_gpu";
> > + regulator-always-on;
> > + regulator-initial-mode = <0x2>;
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <1350000>;
> > + regulator-ramp-delay = <6001>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcc_ddr: DCDC_REG3 {
> > + regulator-name = "vcc_ddr";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-initial-mode = <0x2>;
> > +
> > + regulator-state-mem {
> > + regulator-on-in-suspend;
> > + };
> > + };
> > +
> > + vdd_npu: DCDC_REG4 {
> > + regulator-name = "vdd_npu";
> > + regulator-initial-mode = <0x2>;
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <1350000>;
> > + regulator-ramp-delay = <6001>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcc_1v8: DCDC_REG5 {
> > + regulator-name = "vcc_1v8";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdda0v9_image: LDO_REG1 {
> > + regulator-name = "vdda0v9_image";
> > + regulator-min-microvolt = <950000>;
> > + regulator-max-microvolt = <950000>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdda_0v9: LDO_REG2 {
> > + regulator-name = "vdda_0v9";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <900000>;
> > + regulator-max-microvolt = <900000>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdda0v9_pmu: LDO_REG3 {
> > + regulator-name = "vdda0v9_pmu";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <900000>;
> > + regulator-max-microvolt = <900000>;
> > +
> > + regulator-state-mem {
> > + regulator-on-in-suspend;
> > + regulator-suspend-microvolt = <900000>;
> > + };
> > + };
> > +
> > + vccio_acodec: LDO_REG4 {
> > + regulator-name = "vccio_acodec";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vccio_sd: LDO_REG5 {
> > + regulator-name = "vccio_sd";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <3300000>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcc3v3_pmu: LDO_REG6 {
> > + regulator-name = "vcc3v3_pmu";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > +
> > + regulator-state-mem {
> > + regulator-on-in-suspend;
> > + regulator-suspend-microvolt = <3300000>;
> > + };
> > + };
> > +
> > + vcca_1v8: LDO_REG7 {
> > + regulator-name = "vcca_1v8";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcca1v8_pmu: LDO_REG8 {
> > + regulator-name = "vcca1v8_pmu";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > +
> > + regulator-state-mem {
> > + regulator-on-in-suspend;
> > + regulator-suspend-microvolt = <1800000>;
> > + };
> > + };
> > +
> > + vcca1v8_image: LDO_REG9 {
> > + regulator-name = "vcca1v8_image";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcc_3v3: SWITCH_REG1 {
> > + regulator-name = "vcc_3v3";
> > + regulator-always-on;
> > + regulator-boot-on;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vcc3v3_sd: SWITCH_REG2 {
> > + regulator-name = "vcc3v3_sd";
> > + regulator-always-on;
> > + regulator-boot-on;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c1 {
> > + status = "okay";
> > +
> > + hym8563: rtc@51 {
> > + compatible = "haoyu,hym8563";
> > + reg = <0x51>;
> > + #clock-cells = <0>;
> > + clock-output-names = "hym8563";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&hym8563_int>;
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
> > + wakeup-source;
> > + };
> > +};
> > +
> > +&mdio1 {
> > + rgmii_phy1: ethernet-phy@1 {
> > + compatible = "ethernet-phy-ieee802.3-c22";
> > + reg = <1>;
> > + interrupt-parent = <&gpio4>;
> > + interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <ð_phy_reset_pin>;
>
> Please add the reset props here.
>
> > + };
> > +};
> > +
> > +&pcie2x1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pcie_reset_h>;
> > + reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
> > + status = "okay";
> > +};
> > +
> > +&pinctrl {
> > + gpio-leds {
> > + lan_led_pin: lan-led-pin {
> > + rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > +
> > + power_led_pin: power-led-pin {
> > + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > +
> > + wan_led_pin: wan-led-pin {
> > + rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > + };
> > +
> > + gmac {
> > + eth_phy_reset_pin: eth-phy-reset-pin {
> > + rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
> > + };
> > + };
> > +
> > + pcie {
> > + pcie_reset_h: pcie-reset-h {
> > + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
> > + };
> > + };
> > +
> > + pmic {
> > + pmic_int: pmic-int {
> > + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> > + };
> > + };
> > +
> > + rockchip-key {
> > + reset_button_pin: reset-button-pin {
> > + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
> > + };
> > + };
> > +
> > + rtc {
> > + hym8563_int: hym8563-int {
> > + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
> > + };
> > + };
> > +
> > + usb {
> > + vcc5v0_usb_host_en: vcc5v0-usb-host-en {
> > + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > + };
> > +};
> > +
> > +&pmu_io_domains {
> > + status = "okay";
>
> The status prop is typically the last prop.
Will fix it in new patch.
>
> > + pmuio1-supply = <&vcc3v3_pmu>;
> > + pmuio2-supply = <&vcc3v3_pmu>;
> > + vccio1-supply = <&vccio_acodec>;
> > + vccio2-supply = <&vcc_1v8>;
> > + vccio3-supply = <&vccio_sd>;
> > + vccio4-supply = <&vcc_3v3>;
> > + vccio5-supply = <&vcc_1v8>;
> > + vccio6-supply = <&vcc_3v3>;
> > + vccio7-supply = <&vcc_3v3>;
> > +};
> > +
> > +&sdhci {
> > + bus-width = <8>;
> > + max-frequency = <200000000>;
> > + non-removable;
>
> Please add the hs200 prop here, or we will need to add is in U-Boot to
> be able to boot from eMMC.
Thanks for the hint, will fix it in new patch.
Thanks,
Tianling.
>
> Regards,
> Jonas
>
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
> > + status = "okay";
> > +};
> > +
> > +&sdmmc0 {
> > + bus-width = <4>;
> > + cap-mmc-highspeed;
> > + cap-sd-highspeed;
> > + disable-wp;
> > + no-sdio;
> > + no-mmc;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> > + sd-uhs-sdr50;
> > + vmmc-supply = <&vcc3v3_sd>;
> > + vqmmc-supply = <&vccio_sd>;
> > + status = "okay";
> > +};
> > +
> > +&tsadc {
> > + status = "okay";
> > +};
> > +
> > +&uart2 {
> > + status = "okay";
> > +};
> > +
> > +&usb2phy0 {
> > + status = "okay";
> > +};
> > +
> > +&usb2phy0_host {
> > + phy-supply = <&vcc5v0_usb>;
> > + status = "okay";
> > +};
> > +
> > +&usb2phy0_otg {
> > + status = "okay";
> > +};
> > +
> > +&usb_host0_xhci {
> > + extcon = <&usb2phy0>;
> > + status = "okay";
> > +};
> > +
> > +&usb_host1_xhci {
> > + status = "okay";
> > +};
> > +
> > +&vop {
> > + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> > + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> > + status = "okay";
> > +};
> > +
> > +&vop_mmu {
> > + status = "okay";
> > +};
>
[-- Attachment #2: Type: text/plain, Size: 170 bytes --]
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2024-10-22 17:50 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-20 17:39 [PATCH 1/2] dt-bindings: arm: rockchip: Add FriendlyARM NanoPi R3S Tianling Shen
2024-10-20 17:39 ` [PATCH 2/2] arm64: dts: rockchip: Add FriendlyARM NanoPi R3S board Tianling Shen
2024-10-22 16:49 ` Jonas Karlman
2024-10-22 17:38 ` Tianling Shen [this message]
2024-10-22 17:56 ` Jonas Karlman
2024-10-22 18:18 ` Tianling Shen
2024-10-22 18:43 ` Jonas Karlman
2024-10-21 11:47 ` [PATCH 1/2] dt-bindings: arm: rockchip: Add FriendlyARM NanoPi R3S Conor Dooley
2024-10-22 14:12 ` Heiko Stuebner
2024-10-22 17:07 ` Jonas Karlman
2024-10-22 20:34 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241022173901.892190-1-cnsztl@gmail.com \
--to=cnsztl@gmail.com \
--cc=andyshrk@163.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jagan@edgeble.ai \
--cc=jonas@kwiboo.se \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=macromorgan@hotmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox