From: Damon Ding <damon.ding@rock-chips.com>
To: heiko@sntech.de
Cc: robh@kernel.org, conor+dt@kernel.org, algea.cao@rock-chips.com,
rfoss@kernel.org, devicetree@vger.kernel.org,
linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org,
sebastian.reichel@collabora.com, dri-devel@lists.freedesktop.org,
hjc@rock-chips.com, kever.yang@rock-chips.com,
linux-rockchip@lists.infradead.org, vkoul@kernel.org,
Damon Ding <damon.ding@rock-chips.com>,
andy.yan@rock-chips.com, krzk+dt@kernel.org,
linux-arm-kernel@lists.infradead.org, l.stach@pengutronix.de
Subject: [PATCH v3 04/15] phy: phy-rockchip-samsung-hdptx: Rename some register names related to DP
Date: Thu, 19 Dec 2024 16:05:53 +0800 [thread overview]
Message-ID: <20241219080604.1423600-5-damon.ding@rock-chips.com> (raw)
In-Reply-To: <20241219080604.1423600-1-damon.ding@rock-chips.com>
The modifications of DP register names are as follows:
- Add the '_MASK' suffix to some registers to ensure consistency.
- Complete the names of some register to their full names.
- Swap the definitions of LCPLL_REF and ROPLL_REF.
Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
---
.../phy/rockchip/phy-rockchip-samsung-hdptx.c | 64 +++++++++----------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index ceab9c71d3b5..c1b9c73f5f9f 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -69,41 +69,41 @@
#define ROPLL_PMS_IQDIV_RSTN BIT(5)
/* CMN_REG(005e) */
#define ROPLL_SDM_EN_MASK BIT(6)
-#define ROPLL_SDM_FRAC_EN_RBR BIT(3)
-#define ROPLL_SDM_FRAC_EN_HBR BIT(2)
-#define ROPLL_SDM_FRAC_EN_HBR2 BIT(1)
-#define ROPLL_SDM_FRAC_EN_HBR3 BIT(0)
+#define ROPLL_SDC_FRAC_EN_RBR_MASK BIT(3)
+#define ROPLL_SDC_FRAC_EN_HBR_MASK BIT(2)
+#define ROPLL_SDC_FRAC_EN_HBR2_MASK BIT(1)
+#define ROPLL_SDM_FRAC_EN_HBR3_MASK BIT(0)
/* CMN_REG(0064) */
#define ROPLL_SDM_NUM_SIGN_RBR_MASK BIT(3)
/* CMN_REG(0069) */
#define ROPLL_SDC_N_RBR_MASK GENMASK(2, 0)
/* CMN_REG(0074) */
-#define ROPLL_SDC_NDIV_RSTN BIT(2)
-#define ROPLL_SSC_EN BIT(0)
+#define ROPLL_SDC_NDIV_RSTN_MASK BIT(2)
+#define ROPLL_SSC_EN_MASK BIT(0)
/* CMN_REG(0081) */
-#define OVRD_PLL_CD_CLK_EN BIT(8)
-#define PLL_CD_HSCLK_EAST_EN BIT(0)
+#define OVRD_PLL_CD_CLK_EN_MASK BIT(8)
+#define ANA_PLL_CD_HSCLK_EAST_EN_MASK BIT(0)
/* CMN_REG(0086) */
#define PLL_PCG_POSTDIV_SEL_MASK GENMASK(7, 4)
#define PLL_PCG_CLK_SEL_MASK GENMASK(3, 1)
#define PLL_PCG_CLK_EN BIT(0)
/* CMN_REG(0087) */
-#define PLL_FRL_MODE_EN BIT(3)
-#define PLL_TX_HS_CLK_EN BIT(2)
+#define ANA_PLL_FRL_MODE_EN_MASK BIT(3)
+#define ANA_PLL_TX_HS_CLK_EN_MASK BIT(2)
/* CMN_REG(0089) */
#define LCPLL_ALONE_MODE BIT(1)
/* CMN_REG(0097) */
-#define DIG_CLK_SEL BIT(1)
-#define ROPLL_REF BIT(1)
-#define LCPLL_REF 0
+#define DIG_CLK_SEL_MASK BIT(1)
+#define LCPLL_REF BIT(1)
+#define ROPLL_REF 0
/* CMN_REG(0099) */
#define CMN_ROPLL_ALONE_MODE BIT(2)
#define ROPLL_ALONE_MODE BIT(2)
/* CMN_REG(009a) */
-#define HS_SPEED_SEL BIT(0)
+#define HS_SPEED_SEL_MASK BIT(0)
#define DIV_10_CLOCK BIT(0)
/* CMN_REG(009b) */
-#define IS_SPEED_SEL BIT(4)
+#define LS_SPEED_SEL_MASK BIT(4)
#define LINK_SYMBOL_CLOCK BIT(4)
#define LINK_SYMBOL_CLOCK1_2 0
@@ -165,32 +165,32 @@
#define HDMI_MODE BIT(2)
#define HDMI_TMDS_FRL_SEL BIT(1)
/* LNTOP_REG(0206) */
-#define DATA_BUS_SEL BIT(0)
+#define DATA_BUS_WIDTH_SEL_MASK BIT(0)
#define DATA_BUS_36_40 BIT(0)
/* LNTOP_REG(0207) */
#define LANE_EN 0xf
#define ALL_LANE_EN 0xf
/* LANE_REG(0312) */
-#define LN0_TX_SER_RATE_SEL_RBR BIT(5)
-#define LN0_TX_SER_RATE_SEL_HBR BIT(4)
-#define LN0_TX_SER_RATE_SEL_HBR2 BIT(3)
-#define LN0_TX_SER_RATE_SEL_HBR3 BIT(2)
+#define LN0_TX_SER_RATE_SEL_RBR_MASK BIT(5)
+#define LN0_TX_SER_RATE_SEL_HBR_MASK BIT(4)
+#define LN0_TX_SER_RATE_SEL_HBR2_MASK BIT(3)
+#define LN0_TX_SER_RATE_SEL_HBR3_MASK BIT(2)
/* LANE_REG(0412) */
-#define LN1_TX_SER_RATE_SEL_RBR BIT(5)
-#define LN1_TX_SER_RATE_SEL_HBR BIT(4)
-#define LN1_TX_SER_RATE_SEL_HBR2 BIT(3)
-#define LN1_TX_SER_RATE_SEL_HBR3 BIT(2)
+#define LN1_TX_SER_RATE_SEL_RBR_MASK BIT(5)
+#define LN1_TX_SER_RATE_SEL_HBR_MASK BIT(4)
+#define LN1_TX_SER_RATE_SEL_HBR2_MASK BIT(3)
+#define LN1_TX_SER_RATE_SEL_HBR3_MASK BIT(2)
/* LANE_REG(0512) */
-#define LN2_TX_SER_RATE_SEL_RBR BIT(5)
-#define LN2_TX_SER_RATE_SEL_HBR BIT(4)
-#define LN2_TX_SER_RATE_SEL_HBR2 BIT(3)
-#define LN2_TX_SER_RATE_SEL_HBR3 BIT(2)
+#define LN2_TX_SER_RATE_SEL_RBR_MASK BIT(5)
+#define LN2_TX_SER_RATE_SEL_HBR_MASK BIT(4)
+#define LN2_TX_SER_RATE_SEL_HBR2_MASK BIT(3)
+#define LN2_TX_SER_RATE_SEL_HBR3_MASK BIT(2)
/* LANE_REG(0612) */
-#define LN3_TX_SER_RATE_SEL_RBR BIT(5)
-#define LN3_TX_SER_RATE_SEL_HBR BIT(4)
-#define LN3_TX_SER_RATE_SEL_HBR2 BIT(3)
-#define LN3_TX_SER_RATE_SEL_HBR3 BIT(2)
+#define LN3_TX_SER_RATE_SEL_RBR_MASK BIT(5)
+#define LN3_TX_SER_RATE_SEL_HBR_MASK BIT(4)
+#define LN3_TX_SER_RATE_SEL_HBR2_MASK BIT(3)
+#define LN3_TX_SER_RATE_SEL_HBR3_MASK BIT(2)
#define HDMI20_MAX_RATE 600000000
--
2.34.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2024-12-19 8:11 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-19 8:05 [PATCH v3 00/15] Add eDP support for RK3588 Damon Ding
2024-12-19 8:05 ` [PATCH v3 01/15] drm/rockchip: analogix_dp: Use formalized struct definition for grf field Damon Ding
2024-12-19 8:05 ` [PATCH v3 02/15] dt-bindings: display: rockchip: analogix-dp: Add support for RK3588 Damon Ding
2024-12-19 8:28 ` Krzysztof Kozlowski
2024-12-26 2:10 ` Damon Ding
2024-12-19 8:05 ` [PATCH v3 03/15] drm/rockchip: analogix_dp: " Damon Ding
2024-12-19 8:05 ` Damon Ding [this message]
2024-12-20 0:22 ` [PATCH v3 04/15] phy: phy-rockchip-samsung-hdptx: Rename some register names related to DP Dmitry Baryshkov
2024-12-20 1:46 ` Damon Ding
2024-12-20 2:01 ` Dmitry Baryshkov
2024-12-19 8:05 ` [PATCH v3 05/15] phy: phy-rockchip-samsung-hdptx: Add support for eDP mode Damon Ding
2024-12-19 8:05 ` [PATCH v3 06/15] drm/bridge: analogix_dp: Add support for RK3588 Damon Ding
2024-12-19 8:05 ` [PATCH v3 07/15] drm/bridge: analogix_dp: Add support for phy configuration Damon Ding
2024-12-20 0:13 ` Dmitry Baryshkov
2024-12-20 0:17 ` Diederik de Haas
2024-12-20 3:37 ` Damon Ding
2024-12-20 5:37 ` Dmitry Baryshkov
2024-12-25 8:27 ` Damon Ding
2024-12-19 8:05 ` [PATCH v3 08/15] drm/rockchip: analogix_dp: Add support to get panel from the DP AUX bus Damon Ding
2024-12-20 0:16 ` Dmitry Baryshkov
2024-12-20 8:29 ` Damon Ding
2024-12-19 8:05 ` [PATCH v3 09/15] drm/bridge: " Damon Ding
2024-12-20 0:17 ` Dmitry Baryshkov
2024-12-19 8:05 ` [PATCH v3 10/15] dt-bindings: display: rockchip: analogix-dp: " Damon Ding
2024-12-20 0:18 ` Dmitry Baryshkov
2024-12-20 2:48 ` Damon Ding
2024-12-24 9:36 ` Krzysztof Kozlowski
2024-12-19 8:06 ` [PATCH v3 11/15] dt-bindings: display: rockchip: Fix label name of hdptxphy for RK3588 HDMI TX Controller Damon Ding
2024-12-19 8:06 ` [PATCH v3 12/15] arm64: dts: rockchip: Fix label name of hdptxphy for RK3588 Damon Ding
2024-12-19 8:06 ` [PATCH v3 13/15] arm64: dts: rockchip: Add eDP0 node " Damon Ding
2024-12-19 8:06 ` [PATCH v3 14/15] arm64: dts: rockchip: Enable eDP0 display on RK3588S EVB1 board Damon Ding
2024-12-20 0:20 ` Dmitry Baryshkov
2024-12-20 2:38 ` Damon Ding
2024-12-20 5:38 ` Dmitry Baryshkov
2024-12-25 9:34 ` Damon Ding
2024-12-26 20:26 ` Dmitry Baryshkov
2024-12-27 8:54 ` Damon Ding
2024-12-19 8:06 ` [PATCH v3 15/15] arm64: dts: rockchip: Add eDP1 node for RK3588 Damon Ding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241219080604.1423600-5-damon.ding@rock-chips.com \
--to=damon.ding@rock-chips.com \
--cc=algea.cao@rock-chips.com \
--cc=andy.yan@rock-chips.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=kever.yang@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox