From: Damon Ding <damon.ding@rock-chips.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: robh@kernel.org, conor+dt@kernel.org, algea.cao@rock-chips.com,
rfoss@kernel.org, heiko@sntech.de, devicetree@vger.kernel.org,
linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org,
sebastian.reichel@collabora.com, dri-devel@lists.freedesktop.org,
hjc@rock-chips.com, kever.yang@rock-chips.com,
linux-rockchip@lists.infradead.org, vkoul@kernel.org,
andy.yan@rock-chips.com, krzk+dt@kernel.org,
linux-arm-kernel@lists.infradead.org, l.stach@pengutronix.de
Subject: Re: [PATCH v3 14/15] arm64: dts: rockchip: Enable eDP0 display on RK3588S EVB1 board
Date: Wed, 25 Dec 2024 17:34:17 +0800 [thread overview]
Message-ID: <32c7ef0a-8da6-449a-8f2d-59965aa622ec@rock-chips.com> (raw)
In-Reply-To: <CAA8EJpp0Smtqx7VQ5zdg9x3EhuLpk4u4vGv=rv8DHJ0rhei18w@mail.gmail.com>
Hi Dmitry,
On 2024/12/20 13:38, Dmitry Baryshkov wrote:
> On Fri, 20 Dec 2024 at 04:38, Damon Ding <damon.ding@rock-chips.com> wrote:
>>
>> Hi Dmitry,
>>
>> On 2024/12/20 8:20, Dmitry Baryshkov wrote:
>>> On Thu, Dec 19, 2024 at 04:06:03PM +0800, Damon Ding wrote:
>>>> Add the necessary DT changes to enable eDP0 on RK3588S EVB1 board:
>>>> - Add edp-panel node
>>>> - Set pinctrl of pwm12 for backlight
>>>> - Enable edp0/hdptxphy0/vp2
>>>>
>>>> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
>>>>
>>>> ---
>>>>
>>>> Changes in v2:
>>>> - Remove brightness-levels and default-brightness-level properties in
>>>> backlight node.
>>>> - Add the detail DT changes to commit message.
>>>>
>>>> Changes in v3:
>>>> - Use aux-bus instead of platform bus for edp-panel.
>>>> ---
>>>> .../boot/dts/rockchip/rk3588s-evb1-v10.dts | 52 +++++++++++++++++++
>>>> 1 file changed, 52 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
>>>> index bc4077575beb..9547ab18e596 100644
>>>> --- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
>>>> @@ -9,6 +9,7 @@
>>>> #include <dt-bindings/gpio/gpio.h>
>>>> #include <dt-bindings/input/input.h>
>>>> #include <dt-bindings/pinctrl/rockchip.h>
>>>> +#include <dt-bindings/soc/rockchip,vop2.h>
>>>> #include <dt-bindings/usb/pd.h>
>>>> #include "rk3588s.dtsi"
>>>>
>>>> @@ -238,6 +239,41 @@ &combphy2_psu {
>>>> status = "okay";
>>>> };
>>>>
>>>> +&edp0 {
>>>> + force-hpd;
>>>> + status = "okay";
>>>> +
>>>> + aux-bus {
>>>> + panel {
>>>> + compatible = "lg,lp079qx1-sp0v";
>>>
>>> Why do you need the particular compat string here? Can you use the
>>> generic "edp-panel" instead? What if the user swaps the panel?
>>>
>>
>> The eDP panels used in conjunction with the RK3588S EVB1 have broken
>> identification, which is one of the valid reasons for using a particular
>> compat string. So the generic_edp_panel_probe() can not return success
>> when using the "edp-panel".
>
> Broken how? I don't see such info in the commit message.
>
The log related to the broken identification may be like:
[ 0.623793] panel-simple-dp-aux aux-fdec0000.edp: Unknown panel ETC
0x0000, using conservative timings
The eDP panel used in RK3588S EVB1 is indeed the LP079QX1_SP0V model, it
should be also reasonable to use the "lg,lp079qx1-sp0v".
And I will mention all of the above in the commit message for the next
version.
>>
>>>> + backlight = <&backlight>;
>>>> + power-supply = <&vcc3v3_lcd_edp>;
>>>> +
>>>> + port {
>>>> + panel_in_edp: endpoint {
>>>> + remote-endpoint = <&edp_out_panel>;
>>>> + };
>>>> + };
>>>> + };
>>>> + };
>>>> +};
>>>> +
>>>> +&edp0_in {
>>>> + edp0_in_vp2: endpoint {
>>>> + remote-endpoint = <&vp2_out_edp0>;
>>>> + };
>>>> +};
>>>> +
>>>> +&edp0_out {
>>>> + edp_out_panel: endpoint {
>>>> + remote-endpoint = <&panel_in_edp>;
>>>> + };
>>>> +};
>>>> +
>>>> +&hdptxphy0 {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> &i2c3 {
>>>> status = "okay";
>>>>
>>>> @@ -399,6 +435,7 @@ usbc0_int: usbc0-int {
>>>> };
>>>>
>>>> &pwm12 {
>>>> + pinctrl-0 = <&pwm12m1_pins>;
>>>> status = "okay";
>>>> };
>>>>
>>>> @@ -1168,3 +1205,18 @@ usbdp_phy0_dp_altmode_mux: endpoint@1 {
>>>> };
>>>> };
>>>> };
>>>> +
>>>> +&vop_mmu {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&vop {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&vp2 {
>>>> + vp2_out_edp0: endpoint@ROCKCHIP_VOP2_EP_EDP0 {
>>>> + reg = <ROCKCHIP_VOP2_EP_EDP0>;
>>>> + remote-endpoint = <&edp0_in_vp2>;
>>>> + };
>>>> +};
>>>> --
>>>> 2.34.1
>>>>
Best regards
Damon
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2024-12-25 9:34 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-19 8:05 [PATCH v3 00/15] Add eDP support for RK3588 Damon Ding
2024-12-19 8:05 ` [PATCH v3 01/15] drm/rockchip: analogix_dp: Use formalized struct definition for grf field Damon Ding
2024-12-19 8:05 ` [PATCH v3 02/15] dt-bindings: display: rockchip: analogix-dp: Add support for RK3588 Damon Ding
2024-12-19 8:28 ` Krzysztof Kozlowski
2024-12-26 2:10 ` Damon Ding
2024-12-19 8:05 ` [PATCH v3 03/15] drm/rockchip: analogix_dp: " Damon Ding
2024-12-19 8:05 ` [PATCH v3 04/15] phy: phy-rockchip-samsung-hdptx: Rename some register names related to DP Damon Ding
2024-12-20 0:22 ` Dmitry Baryshkov
2024-12-20 1:46 ` Damon Ding
2024-12-20 2:01 ` Dmitry Baryshkov
2024-12-19 8:05 ` [PATCH v3 05/15] phy: phy-rockchip-samsung-hdptx: Add support for eDP mode Damon Ding
2024-12-19 8:05 ` [PATCH v3 06/15] drm/bridge: analogix_dp: Add support for RK3588 Damon Ding
2024-12-19 8:05 ` [PATCH v3 07/15] drm/bridge: analogix_dp: Add support for phy configuration Damon Ding
2024-12-20 0:13 ` Dmitry Baryshkov
2024-12-20 0:17 ` Diederik de Haas
2024-12-20 3:37 ` Damon Ding
2024-12-20 5:37 ` Dmitry Baryshkov
2024-12-25 8:27 ` Damon Ding
2024-12-19 8:05 ` [PATCH v3 08/15] drm/rockchip: analogix_dp: Add support to get panel from the DP AUX bus Damon Ding
2024-12-20 0:16 ` Dmitry Baryshkov
2024-12-20 8:29 ` Damon Ding
2024-12-19 8:05 ` [PATCH v3 09/15] drm/bridge: " Damon Ding
2024-12-20 0:17 ` Dmitry Baryshkov
2024-12-19 8:05 ` [PATCH v3 10/15] dt-bindings: display: rockchip: analogix-dp: " Damon Ding
2024-12-20 0:18 ` Dmitry Baryshkov
2024-12-20 2:48 ` Damon Ding
2024-12-24 9:36 ` Krzysztof Kozlowski
2024-12-19 8:06 ` [PATCH v3 11/15] dt-bindings: display: rockchip: Fix label name of hdptxphy for RK3588 HDMI TX Controller Damon Ding
2024-12-19 8:06 ` [PATCH v3 12/15] arm64: dts: rockchip: Fix label name of hdptxphy for RK3588 Damon Ding
2024-12-19 8:06 ` [PATCH v3 13/15] arm64: dts: rockchip: Add eDP0 node " Damon Ding
2024-12-19 8:06 ` [PATCH v3 14/15] arm64: dts: rockchip: Enable eDP0 display on RK3588S EVB1 board Damon Ding
2024-12-20 0:20 ` Dmitry Baryshkov
2024-12-20 2:38 ` Damon Ding
2024-12-20 5:38 ` Dmitry Baryshkov
2024-12-25 9:34 ` Damon Ding [this message]
2024-12-26 20:26 ` Dmitry Baryshkov
2024-12-27 8:54 ` Damon Ding
2024-12-19 8:06 ` [PATCH v3 15/15] arm64: dts: rockchip: Add eDP1 node for RK3588 Damon Ding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=32c7ef0a-8da6-449a-8f2d-59965aa622ec@rock-chips.com \
--to=damon.ding@rock-chips.com \
--cc=algea.cao@rock-chips.com \
--cc=andy.yan@rock-chips.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=kever.yang@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox