From: Jonas Karlman <jonas@kwiboo.se>
To: Heiko Stuebner <heiko@sntech.de>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Yao Zi <ziyao@disroot.org>,
linux-rockchip@lists.infradead.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Jonas Karlman <jonas@kwiboo.se>
Subject: [PATCH 3/4] arm64: dts: rockchip: Add GMAC nodes for RK3528
Date: Thu, 6 Mar 2025 22:13:56 +0000 [thread overview]
Message-ID: <20250306221402.1704196-4-jonas@kwiboo.se> (raw)
In-Reply-To: <20250306221402.1704196-1-jonas@kwiboo.se>
Rockchip RK3528 has two Ethernet controllers based on Synopsys DWC
Ethernet QoS IP.
Add device tree nodes for the two Ethernet controllers in RK3528.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
gmac0 is missing the integrated-phy and has not been tested bacause I do
not have any board that use this Ethernet controller.
---
arch/arm64/boot/dts/rockchip/rk3528.dtsi | 92 ++++++++++++++++++++++++
1 file changed, 92 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
index c1a71ea81e03..5940719cffec 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
@@ -286,6 +286,98 @@ saradc: adc@ffae0000 {
#io-channel-cells = <1>;
};
+ gmac0: ethernet@ffbd0000 {
+ compatible = "rockchip,rk3528-gmac", "snps,dwmac-4.20a";
+ reg = <0x0 0xffbd0000 0x0 0x10000>;
+ clocks = <&cru CLK_GMAC0_SRC>, <&cru CLK_GMAC0_RMII_50M>,
+ <&cru CLK_GMAC0_RX>, <&cru CLK_GMAC0_TX>,
+ <&cru PCLK_MAC_VO>, <&cru ACLK_MAC_VO>;
+ clock-names = "stmmaceth", "clk_mac_ref",
+ "mac_clk_rx", "mac_clk_tx",
+ "pclk_mac", "aclk_mac";
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ resets = <&cru SRST_A_MAC_VO>;
+ reset-names = "stmmaceth";
+ rockchip,grf = <&vo_grf>;
+ snps,axi-config = <&gmac0_stmmac_axi_setup>;
+ snps,mixed-burst;
+ snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+ snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+ snps,tso;
+ status = "disabled";
+
+ mdio0: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ };
+
+ gmac0_stmmac_axi_setup: stmmac-axi-config {
+ snps,blen = <0 0 0 0 16 8 4>;
+ snps,rd_osr_lmt = <8>;
+ snps,wr_osr_lmt = <4>;
+ };
+
+ gmac0_mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+ queue0 {};
+ };
+
+ gmac0_mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <1>;
+ queue0 {};
+ };
+ };
+
+ gmac1: ethernet@ffbe0000 {
+ compatible = "rockchip,rk3528-gmac", "snps,dwmac-4.20a";
+ reg = <0x0 0xffbe0000 0x0 0x10000>;
+ clocks = <&cru CLK_GMAC1_SRC_VPU>,
+ <&cru CLK_GMAC1_RMII_VPU>,
+ <&cru PCLK_MAC_VPU>,
+ <&cru ACLK_MAC_VPU>;
+ clock-names = "stmmaceth",
+ "clk_mac_ref",
+ "pclk_mac",
+ "aclk_mac";
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ resets = <&cru SRST_A_MAC>;
+ reset-names = "stmmaceth";
+ rockchip,grf = <&vpu_grf>;
+ snps,axi-config = <&gmac1_stmmac_axi_setup>;
+ snps,mixed-burst;
+ snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
+ snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
+ snps,tso;
+ status = "disabled";
+
+ mdio1: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ };
+
+ gmac1_stmmac_axi_setup: stmmac-axi-config {
+ snps,blen = <0 0 0 0 16 8 4>;
+ snps,rd_osr_lmt = <8>;
+ snps,wr_osr_lmt = <4>;
+ };
+
+ gmac1_mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+ queue0 {};
+ };
+
+ gmac1_mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <1>;
+ queue0 {};
+ };
+ };
+
sdhci: mmc@ffbf0000 {
compatible = "rockchip,rk3528-dwcmshc",
"rockchip,rk3588-dwcmshc";
--
2.48.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2025-03-06 22:19 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-06 22:13 [PATCH 0/4] rockchip: Enable Ethernet controller on Radxa E20C Jonas Karlman
2025-03-06 22:13 ` [PATCH 1/4] dt-bindings: net: rockchip-dwmac: Add compatible string for RK3528 Jonas Karlman
2025-03-07 15:42 ` Conor Dooley
2025-03-07 16:01 ` Jonas Karlman
2025-03-06 22:13 ` [PATCH 2/4] ethernet: stmmac: dwmac-rk: Add GMAC support " Jonas Karlman
2025-03-06 22:13 ` Jonas Karlman [this message]
2025-03-06 22:46 ` [PATCH 3/4] arm64: dts: rockchip: Add GMAC nodes " Andrew Lunn
2025-03-07 0:05 ` Jonas Karlman
2025-03-07 14:02 ` Andrew Lunn
2025-03-06 22:13 ` [PATCH 4/4] arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C Jonas Karlman
2025-03-06 22:49 ` Andrew Lunn
2025-03-07 9:16 ` Jonas Karlman
2025-03-07 13:25 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250306221402.1704196-4-jonas@kwiboo.se \
--to=jonas@kwiboo.se \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=ziyao@disroot.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox