Re: [PATCH v5 03/11] media: dt-bindings: media: add bindings for rockchip rk3568 vicap

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

On Mon, Apr 28, 2025 at 11:48:57AM +0200, Michael Riesch wrote:
> On 4/28/25 11:22, Laurent Pinchart wrote:
> > On Mon, Apr 28, 2025 at 10:11:51AM +0200, Michael Riesch wrote:
> >> Hi Krzysztof, Sakari,
> >>
> >> Thanks for your feedback! Also, sorry for the delayed response, but as
> >> the e-mail address indicates, there has been a job change in between
> >> that kept me busy :-)
> >>
> >> On 3/7/25 10:49, Sakari Ailus wrote:
> >>> Hi Krzysztof, Michael,
> >>>
> >>> On Fri, Mar 07, 2025 at 08:51:54AM +0100, Krzysztof Kozlowski wrote:
> >>>> On Thu, Mar 06, 2025 at 05:56:04PM +0100, Michael Riesch wrote:
> >>>>> Add documentation for the Rockchip RK3568 Video Capture (VICAP) unit.
> >>>>>
> >>>>> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
> >>>>
> >>>> subject: only one media prefix, the first
> >>>>
> >>>> A nit, subject: drop second/last, redundant "bindings". The
> >>>> "dt-bindings" prefix is already stating that these are bindings.
> >>>> See also:
> >>>> https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18
> >>
> >> Ack. Plain "media: dt-bindings: add rockchip rk3568 vicap" it is, then.
> >>
> >>>>
> >>>>> ---
> >>>>>  .../bindings/media/rockchip,rk3568-vicap.yaml      | 169 +++++++++++++++++++++
> >>>>>  MAINTAINERS                                        |   1 +
> >>>>>  2 files changed, 170 insertions(+)
> >>>>>
> >>>>
> >>>> ...
> >>>>
> >>>>> +  clocks:
> >>>>> +    items:
> >>>>> +      - description: ACLK
> >>>>> +      - description: HCLK
> >>>>> +      - description: DCLK
> >>>>> +      - description: ICLK
> >>>>> +
> >>>>> +  clock-names:
> >>>>> +    items:
> >>>>> +      - const: aclk
> >>>>> +      - const: hclk
> >>>>> +      - const: dclk
> >>>>> +      - const: iclk
> >>>>> +
> >>>>> +  rockchip,cif-clk-delaynum:
> >>>>> +    $ref: /schemas/types.yaml#/definitions/uint32
> >>>>> +    minimum: 0
> >>>>> +    maximum: 127
> >>>>> +    description:
> >>>>> +      Delay the DVP path clock input to align the sampling phase, only valid
> >>>>> +      in dual edge sampling mode. Delay is zero by default and can be adjusted
> >>>>> +      optionally.
> >>>>
> >>>> default: 0
> >>
> >> Ack.
> >>
> >>>
> >>> And this is technically specific to the DVP port (0). Should (or could?) it
> >>> be located there?
> >>
> >> "Should"? Yes, makes sense to me.
> >> "Could"? I guess, as we are referencing port-base here it should be
> >> feasible. Not an expert opinion, mind you.
> >>
> >>>
> >>>>
> >>>>> +
> >>>>> +  iommus:
> >>>>> +    maxItems: 1
> >>>>> +
> >>>>> +  resets:
> >>>>> +    items:
> >>>>> +      - description: ARST
> >>>>> +      - description: HRST
> >>>>> +      - description: DRST
> >>>>> +      - description: PRST
> >>>>> +      - description: IRST
> >>>>> +
> >>>>> +  reset-names:
> >>>>> +    items:
> >>>>> +      - const: arst
> >>>>> +      - const: hrst
> >>>>> +      - const: drst
> >>>>> +      - const: prst
> >>>>> +      - const: irst
> >>>>> +
> >>>>> +  rockchip,grf:
> >>>>> +    $ref: /schemas/types.yaml#/definitions/phandle
> >>>>> +    description: Phandle to general register file used for video input block control.
> >>>>> +
> >>>>> +  power-domains:
> >>>>> +    maxItems: 1
> >>>>> +
> >>>>> +  ports:
> >>>>> +    $ref: /schemas/graph.yaml#/properties/ports
> >>>>> +
> >>>>> +    properties:
> >>>>> +      port@0:
> >>>>> +        $ref: /schemas/graph.yaml#/$defs/port-base
> >>>>> +        unevaluatedProperties: false
> >>>>> +        description: The digital video port (DVP, a parallel video interface).
> >>>>> +
> >>>>> +        properties:
> >>>>> +          endpoint:
> >>>>> +            $ref: video-interfaces.yaml#
> >>>>> +            unevaluatedProperties: false
> >>>>> +
> >>>>> +            properties:
> >>>>> +              bus-type:
> >>>>> +                enum: [5, 6]
> >>>>> +
> >>>>> +            required:
> >>>>> +              - bus-type
> >>>>> +
> >>>>> +      port@1:
> >>>>> +        $ref: /schemas/graph.yaml#/properties/port
> >>>>> +        description: Internal port connected to a MIPI CSI-2 host.
> >>>>> +
> >>>>> +        properties:
> >>>>> +          endpoint:
> >>>>> +            $ref: video-interfaces.yaml#
> >>>>> +            unevaluatedProperties: false
> >>>>
> >>>> Hm, does it actually work? graph/port does not allow any other
> >>>> properties. You should use graph/port-base and probably still narrow
> >>>> lanes for both of port@0 and port@1.
> >>>
> >>> I'd list the relevant properties for both DVP and CSI-2, either as
> >>> mandatory or with defaults (could be reasonable for DVP signal polarities
> >>> but not e.g. on number of CSI-2 lanes).
> >>
> >> Not sure whether we are on the same page here. As pointed out in the
> >> last round of feedback
> >> (https://lore.kernel.org/all/0b19c544-f773-435e-9829-aaaa1c6daf7a@wolfvision.net/),
> >> port@1 is not MIPI CSI, but some internal interface.
> >>
> >> I tried to clarify this by changing the description of this port to
> >> "Internal port connected to a MIPI CSI-2 host." The host (see
> >> rockchip,rk3568-mipi-csi.yaml) has a port that is actually MIPI CSI and
> >> one port that is the other end of port@1 here.
> > 
> > I'd write "Port connected to the MIPI CSI-2 receiver output". We use
> > "receiver" instead of "host".
> 
> Ack. I'll adjust the "host" -> "receiver" wording change in all the
> other places as well.

You can keep "host" when you quote documentation if it uses that
vocabulary, but for generic usage, "receiver" is better.

> >> As to port@1 here, I am not aware of any properties that can be set. Not
> >> even very peculiar ones similar to rockchip,cif-clk-delaynum. Should I
> >> have overlooked something, I think we can relax the constraints, but we
> >> should start strict, right?
> >>
> >>>>> +
> >>>>> +required:
> >>>>> +  - compatible
> >>>>> +  - reg
> >>>>> +  - interrupts
> >>>>> +  - clocks
> >>>>> +  - ports
> >>>>> +
> >>>>> +additionalProperties: false
> >>>>> +
> >>>>> +examples:
> >>>>> +  - |
> >>>>> +    #include <dt-bindings/clock/rk3568-cru.h>
> >>>>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> >>>>> +    #include <dt-bindings/interrupt-controller/irq.h>
> >>>>> +    #include <dt-bindings/power/rk3568-power.h>
> >>>>> +    #include <dt-bindings/media/video-interfaces.h>
> >>>>> +
> >>>>> +    parent {
> >>>>
> >>>> soc {
> >>
> >> Ack.
> >>
> >>>>> +        #address-cells = <2>;
> >>>>> +        #size-cells = <2>;

-- 
Regards,

Laurent Pinchart

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip