From: Michael Riesch <michael.riesch@collabora.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: "Sakari Ailus" <sakari.ailus@linux.intel.com>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
"Mehdi Djait" <mehdi.djait@linux.intel.com>,
"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
"Théo Lebrun" <theo.lebrun@bootlin.com>,
"Gerald Loacker" <gerald.loacker@wolfvision.net>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Heiko Stuebner" <heiko@sntech.de>,
"Kever Yang" <kever.yang@rock-chips.com>,
"Nicolas Dufresne" <nicolas.dufresne@collabora.com>,
"Sebastian Fricke" <sebastian.fricke@collabora.com>,
"Sebastian Reichel" <sebastian.reichel@collabora.com>,
"Paul Kocialkowski" <paulk@sys-base.io>,
"Alexander Shiyan" <eagle.alexander923@gmail.com>,
"Val Packett" <val@packett.cool>, "Rob Herring" <robh@kernel.org>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org
Subject: Re: [PATCH v5 03/11] media: dt-bindings: media: add bindings for rockchip rk3568 vicap
Date: Mon, 28 Apr 2025 11:48:57 +0200 [thread overview]
Message-ID: <1b3245c1-2a4b-4854-ac2f-e89a52a454ec@collabora.com> (raw)
In-Reply-To: <20250428092232.GC3371@pendragon.ideasonboard.com>
Hi Laurent,
On 4/28/25 11:22, Laurent Pinchart wrote:
> On Mon, Apr 28, 2025 at 10:11:51AM +0200, Michael Riesch wrote:
>> Hi Krzysztof, Sakari,
>>
>> Thanks for your feedback! Also, sorry for the delayed response, but as
>> the e-mail address indicates, there has been a job change in between
>> that kept me busy :-)
>>
>> On 3/7/25 10:49, Sakari Ailus wrote:
>>> Hi Krzysztof, Michael,
>>>
>>> On Fri, Mar 07, 2025 at 08:51:54AM +0100, Krzysztof Kozlowski wrote:
>>>> On Thu, Mar 06, 2025 at 05:56:04PM +0100, Michael Riesch wrote:
>>>>> Add documentation for the Rockchip RK3568 Video Capture (VICAP) unit.
>>>>>
>>>>> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
>>>>
>>>> subject: only one media prefix, the first
>>>>
>>>> A nit, subject: drop second/last, redundant "bindings". The
>>>> "dt-bindings" prefix is already stating that these are bindings.
>>>> See also:
>>>> https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18
>>
>> Ack. Plain "media: dt-bindings: add rockchip rk3568 vicap" it is, then.
>>
>>>>
>>>>> ---
>>>>> .../bindings/media/rockchip,rk3568-vicap.yaml | 169 +++++++++++++++++++++
>>>>> MAINTAINERS | 1 +
>>>>> 2 files changed, 170 insertions(+)
>>>>>
>>>>
>>>> ...
>>>>
>>>>> + clocks:
>>>>> + items:
>>>>> + - description: ACLK
>>>>> + - description: HCLK
>>>>> + - description: DCLK
>>>>> + - description: ICLK
>>>>> +
>>>>> + clock-names:
>>>>> + items:
>>>>> + - const: aclk
>>>>> + - const: hclk
>>>>> + - const: dclk
>>>>> + - const: iclk
>>>>> +
>>>>> + rockchip,cif-clk-delaynum:
>>>>> + $ref: /schemas/types.yaml#/definitions/uint32
>>>>> + minimum: 0
>>>>> + maximum: 127
>>>>> + description:
>>>>> + Delay the DVP path clock input to align the sampling phase, only valid
>>>>> + in dual edge sampling mode. Delay is zero by default and can be adjusted
>>>>> + optionally.
>>>>
>>>> default: 0
>>
>> Ack.
>>
>>>
>>> And this is technically specific to the DVP port (0). Should (or could?) it
>>> be located there?
>>
>> "Should"? Yes, makes sense to me.
>> "Could"? I guess, as we are referencing port-base here it should be
>> feasible. Not an expert opinion, mind you.
>>
>>>
>>>>
>>>>> +
>>>>> + iommus:
>>>>> + maxItems: 1
>>>>> +
>>>>> + resets:
>>>>> + items:
>>>>> + - description: ARST
>>>>> + - description: HRST
>>>>> + - description: DRST
>>>>> + - description: PRST
>>>>> + - description: IRST
>>>>> +
>>>>> + reset-names:
>>>>> + items:
>>>>> + - const: arst
>>>>> + - const: hrst
>>>>> + - const: drst
>>>>> + - const: prst
>>>>> + - const: irst
>>>>> +
>>>>> + rockchip,grf:
>>>>> + $ref: /schemas/types.yaml#/definitions/phandle
>>>>> + description: Phandle to general register file used for video input block control.
>>>>> +
>>>>> + power-domains:
>>>>> + maxItems: 1
>>>>> +
>>>>> + ports:
>>>>> + $ref: /schemas/graph.yaml#/properties/ports
>>>>> +
>>>>> + properties:
>>>>> + port@0:
>>>>> + $ref: /schemas/graph.yaml#/$defs/port-base
>>>>> + unevaluatedProperties: false
>>>>> + description: The digital video port (DVP, a parallel video interface).
>>>>> +
>>>>> + properties:
>>>>> + endpoint:
>>>>> + $ref: video-interfaces.yaml#
>>>>> + unevaluatedProperties: false
>>>>> +
>>>>> + properties:
>>>>> + bus-type:
>>>>> + enum: [5, 6]
>>>>> +
>>>>> + required:
>>>>> + - bus-type
>>>>> +
>>>>> + port@1:
>>>>> + $ref: /schemas/graph.yaml#/properties/port
>>>>> + description: Internal port connected to a MIPI CSI-2 host.
>>>>> +
>>>>> + properties:
>>>>> + endpoint:
>>>>> + $ref: video-interfaces.yaml#
>>>>> + unevaluatedProperties: false
>>>>
>>>> Hm, does it actually work? graph/port does not allow any other
>>>> properties. You should use graph/port-base and probably still narrow
>>>> lanes for both of port@0 and port@1.
>>>
>>> I'd list the relevant properties for both DVP and CSI-2, either as
>>> mandatory or with defaults (could be reasonable for DVP signal polarities
>>> but not e.g. on number of CSI-2 lanes).
>>
>> Not sure whether we are on the same page here. As pointed out in the
>> last round of feedback
>> (https://lore.kernel.org/all/0b19c544-f773-435e-9829-aaaa1c6daf7a@wolfvision.net/),
>> port@1 is not MIPI CSI, but some internal interface.
>>
>> I tried to clarify this by changing the description of this port to
>> "Internal port connected to a MIPI CSI-2 host." The host (see
>> rockchip,rk3568-mipi-csi.yaml) has a port that is actually MIPI CSI and
>> one port that is the other end of port@1 here.
>
> I'd write "Port connected to the MIPI CSI-2 receiver output". We use
> "receiver" instead of "host".
Ack. I'll adjust the "host" -> "receiver" wording change in all the
other places as well.
Regards,
Michael
>
>> As to port@1 here, I am not aware of any properties that can be set. Not
>> even very peculiar ones similar to rockchip,cif-clk-delaynum. Should I
>> have overlooked something, I think we can relax the constraints, but we
>> should start strict, right?
>>
>>>>> +
>>>>> +required:
>>>>> + - compatible
>>>>> + - reg
>>>>> + - interrupts
>>>>> + - clocks
>>>>> + - ports
>>>>> +
>>>>> +additionalProperties: false
>>>>> +
>>>>> +examples:
>>>>> + - |
>>>>> + #include <dt-bindings/clock/rk3568-cru.h>
>>>>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>>> + #include <dt-bindings/interrupt-controller/irq.h>
>>>>> + #include <dt-bindings/power/rk3568-power.h>
>>>>> + #include <dt-bindings/media/video-interfaces.h>
>>>>> +
>>>>> + parent {
>>>>
>>>> soc {
>>
>> Ack.
>>
>>>>> + #address-cells = <2>;
>>>>> + #size-cells = <2>;
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2025-04-28 9:51 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-06 16:56 [PATCH v5 00/11] media: rockchip: add a driver for the rockchip camera interface Michael Riesch
2025-03-06 16:56 ` [PATCH v5 01/11] media: dt-bindings: media: video-interfaces: add defines for sampling modes Michael Riesch
2025-03-06 16:56 ` [PATCH v5 02/11] media: dt-bindings: media: add bindings for rockchip px30 vip Michael Riesch
2025-03-06 16:56 ` [PATCH v5 03/11] media: dt-bindings: media: add bindings for rockchip rk3568 vicap Michael Riesch
2025-03-07 7:51 ` Krzysztof Kozlowski
2025-03-07 9:49 ` Sakari Ailus
2025-04-28 8:11 ` Michael Riesch
2025-04-28 9:22 ` Laurent Pinchart
2025-04-28 9:48 ` Michael Riesch [this message]
2025-04-28 9:52 ` Laurent Pinchart
2025-03-06 16:56 ` [PATCH v5 04/11] media: dt-bindings: media: add bindings for rockchip mipi csi host Michael Riesch
2025-03-07 7:53 ` Krzysztof Kozlowski
2025-03-06 16:56 ` [PATCH v5 05/11] media: rockchip: add a driver for the rockchip camera interface Michael Riesch
2025-04-28 14:05 ` Markus Elfring
2025-04-28 15:41 ` Sakari Ailus
2025-04-29 16:08 ` Michael Riesch
2025-05-01 22:03 ` Sakari Ailus
2025-03-06 16:56 ` [PATCH v5 06/11] media: rockchip: rkcif: add driver for mipi csi-2 host Michael Riesch
2025-04-28 10:57 ` Sakari Ailus
2025-03-06 16:56 ` [PATCH v5 07/11] media: rockchip: rkcif: add support for mipi csi-2 receiver Michael Riesch
2025-04-28 15:40 ` Sakari Ailus
2025-03-06 16:56 ` [PATCH v5 08/11] arm64: dts: rockchip: add the vip node to px30 Michael Riesch
2025-03-06 16:56 ` [PATCH v5 09/11] arm64: dts: rockchip: add vicap node to rk356x Michael Riesch
2025-03-06 16:56 ` [PATCH v5 10/11] arm64: dts: rockchip: add mipi csi host " Michael Riesch
2025-03-06 16:56 ` [PATCH v5 11/11] arm64: dts: rockchip: enable vicap dvp on wolfvision pf5 io expander Michael Riesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1b3245c1-2a4b-4854-ac2f-e89a52a454ec@collabora.com \
--to=michael.riesch@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eagle.alexander923@gmail.com \
--cc=gerald.loacker@wolfvision.net \
--cc=heiko@sntech.de \
--cc=kever.yang@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=maxime.chevallier@bootlin.com \
--cc=mchehab@kernel.org \
--cc=mehdi.djait@linux.intel.com \
--cc=nicolas.dufresne@collabora.com \
--cc=p.zabel@pengutronix.de \
--cc=paulk@sys-base.io \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=sebastian.fricke@collabora.com \
--cc=sebastian.reichel@collabora.com \
--cc=theo.lebrun@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=val@packett.cool \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox