Linux-Rockchip Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Chris Morgan <macroalpha82@gmail.com>
To: linux-iio@vger.kernel.org
Cc: andy@kernel.org, nuno.sa@analog.com, dlechner@baylibre.com,
	jic23@kernel.org, jean-baptiste.maneyrol@tdk.com,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
	robh@kernel.org, andriy.shevchenko@intel.com,
	Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V5 07/11] iio: imu: inv_icm42607: Add Temp Support in icm42607
Date: Sat,  9 May 2026 14:19:01 -0500	[thread overview]
Message-ID: <20260509191907.24734-8-macroalpha82@gmail.com> (raw)
In-Reply-To: <20260509191907.24734-1-macroalpha82@gmail.com>

From: Chris Morgan <macromorgan@hotmail.com>

Add functions for reading temperature sensor data.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/iio/imu/inv_icm42607/Makefile         |  1 +
 drivers/iio/imu/inv_icm42607/inv_icm42607.h   |  3 +
 .../iio/imu/inv_icm42607/inv_icm42607_core.c  | 18 +++++
 .../iio/imu/inv_icm42607/inv_icm42607_temp.c  | 80 +++++++++++++++++++
 .../iio/imu/inv_icm42607/inv_icm42607_temp.h  | 33 ++++++++
 5 files changed, 135 insertions(+)
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h

diff --git a/drivers/iio/imu/inv_icm42607/Makefile b/drivers/iio/imu/inv_icm42607/Makefile
index 3c9d08509793..ccb8e007cdeb 100644
--- a/drivers/iio/imu/inv_icm42607/Makefile
+++ b/drivers/iio/imu/inv_icm42607/Makefile
@@ -3,6 +3,7 @@
 obj-$(CONFIG_INV_ICM42607) += inv-icm42607.o
 inv-icm42607-y += inv_icm42607_core.o
 inv-icm42607-y += inv_icm42607_buffer.o
+inv-icm42607-y += inv_icm42607_temp.o
 
 obj-$(CONFIG_INV_ICM42607_I2C) += inv-icm42607-i2c.o
 inv-icm42607-i2c-y += inv_icm42607_i2c.o
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index 6511567a456f..06deebae5230 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -375,6 +375,9 @@ extern const struct dev_pm_ops inv_icm42607_pm_ops;
 
 u32 inv_icm42607_odr_to_period(enum inv_icm42607_odr odr);
 
+int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
+			       unsigned int *sleep_ms);
+
 int inv_icm42607_core_probe(struct regmap *regmap, const struct inv_icm42607_hw *hw,
 			    inv_icm42607_bus_setup bus_setup);
 
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index c956bf02da47..90b3db1de8a5 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -159,6 +159,24 @@ static int inv_icm42607_set_pwr_mgmt0(struct inv_icm42607_state *st,
 	return 0;
 }
 
+int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
+			       unsigned int *sleep_ms)
+{
+	unsigned int val;
+	int ret;
+
+	val = FIELD_PREP(INV_ICM42607_TEMP_CONFIG0_FILTER_MASK,
+			 INV_ICM42607_FILTER_BW_34HZ);
+	ret = regmap_update_bits(st->map, INV_ICM42607_REG_TEMP_CONFIG0,
+				 INV_ICM42607_TEMP_CONFIG0_FILTER_MASK, val);
+	if (ret)
+		return ret;
+
+	return inv_icm42607_set_pwr_mgmt0(st, st->conf.gyro.mode,
+					  st->conf.accel.mode, enable,
+					  sleep_ms);
+}
+
 static int inv_icm42607_set_conf(struct inv_icm42607_state *st,
 				 const struct inv_icm42607_conf *conf)
 {
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c
new file mode 100644
index 000000000000..7e9cb072a011
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include "inv_icm42607.h"
+#include "inv_icm42607_temp.h"
+
+static int inv_icm42607_temp_read(struct inv_icm42607_state *st, s16 *temp)
+{
+	struct device *dev = regmap_get_device(st->map);
+	__be16 *raw;
+	int ret;
+
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+	if (PM_RUNTIME_ACQUIRE_ERR(&pm))
+		return -ENXIO;
+
+	guard(mutex)(&st->lock);
+
+	ret = inv_icm42607_set_temp_conf(st, true, NULL);
+	if (ret)
+		return ret;
+
+	raw = &st->buffer[0];
+	ret = regmap_bulk_read(st->map, INV_ICM42607_REG_TEMP_DATA1, raw, sizeof(*raw));
+	if (ret)
+		return ret;
+
+	*temp = be16_to_cpup(raw);
+	if (*temp == INV_ICM42607_DATA_INVALID)
+		return -EINVAL;
+
+	return 0;
+}
+
+int inv_icm42607_temp_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	s16 temp;
+	int ret;
+
+	if (chan->type != IIO_TEMP)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (!iio_device_claim_direct(indio_dev))
+			return -EBUSY;
+		ret = inv_icm42607_temp_read(st, &temp);
+		iio_device_release_direct(indio_dev);
+		if (ret)
+			return ret;
+		*val = temp;
+		return IIO_VAL_INT;
+	/*
+	 * T°C = (temp / 128) + 25
+	 * Tm°C = 1000 * ((temp * 100 / 12800) + 25)
+	 * scale: 100000 / 12800 ~= 7.8125
+	 * offset: 3200
+	 */
+	case IIO_CHAN_INFO_SCALE:
+		*val = 7;
+		*val2 = 812500000;
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = 3200;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h
new file mode 100644
index 000000000000..e03924e30866
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#ifndef INV_ICM42607_TEMP_H_
+#define INV_ICM42607_TEMP_H_
+
+#include <linux/bitops.h>
+
+struct iio_dev;
+struct iio_chan_spec;
+
+#define INV_ICM42607_TEMP_CHAN(_index)				\
+{								\
+	.type = IIO_TEMP,					\
+	.info_mask_separate =					\
+		BIT(IIO_CHAN_INFO_RAW) |			\
+		BIT(IIO_CHAN_INFO_OFFSET) |			\
+		BIT(IIO_CHAN_INFO_SCALE),			\
+	.scan_index = _index,					\
+	.scan_type = {						\
+		.sign = 's',					\
+		.realbits = 16,					\
+		.storagebits = 16,				\
+	},							\
+}
+
+int inv_icm42607_temp_read_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int *val, int *val2, long mask);
+
+#endif
-- 
2.43.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  parent reply	other threads:[~2026-05-09 19:21 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-09 19:18 [PATCH V5 00/11] Add Invensense ICM42607 Chris Morgan
2026-05-09 19:18 ` [PATCH V5 01/11] dt-bindings: iio: imu: icm42600: Add mount-matrix to icm42600 Chris Morgan
2026-05-09 19:18 ` [PATCH V5 02/11] dt-bindings: iio: imu: icm42600: Add icm42607 binding Chris Morgan
2026-05-09 19:18 ` [PATCH V5 03/11] iio: imu: inv_icm42607: Add inv_icm42607 Core Driver Chris Morgan
2026-05-09 19:18 ` [PATCH V5 04/11] iio: imu: inv_icm42607: Add I2C and SPI For icm42607 Chris Morgan
2026-05-09 19:18 ` [PATCH V5 05/11] iio: imu: inv_icm42607: Add PM support for icm42607 Chris Morgan
2026-05-09 19:19 ` [PATCH V5 06/11] iio: imu: inv_icm42607: Add Buffer " Chris Morgan
2026-05-09 19:19 ` Chris Morgan [this message]
2026-05-09 19:19 ` [PATCH V5 08/11] iio: imu: inv_icm42607: Add Accelerometer " Chris Morgan
2026-05-09 19:19 ` [PATCH V5 09/11] iio: imu: inv_icm42607: Add Wake on Movement to icm42607 Chris Morgan
2026-05-09 19:19 ` [PATCH V5 10/11] iio: imu: inv_icm42607: Add Gyroscope " Chris Morgan
2026-05-09 19:19 ` [PATCH V5 11/11] arm64: dts: rockchip: Add icm42607p IMU for RG-DS Chris Morgan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260509191907.24734-8-macroalpha82@gmail.com \
    --to=macroalpha82@gmail.com \
    --cc=andriy.shevchenko@intel.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=heiko@sntech.de \
    --cc=jean-baptiste.maneyrol@tdk.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=macromorgan@hotmail.com \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox