[PATCH v4 07/10] arm64: dts: rockchip: Add eDP node for RK3576

[Damon Ding <damon.ding@rock-chips.com>]

Add full device tree definition for the integrated eDP controller
on RK3576, following the existing RK3588 hardware layout.

Configure required register range, clocks, interrupt, phy, power
domain, reset and grf properties to fully describe the controller.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>

---

Changes in v2:
- Add Reviewed-by tag.

Changes in v4:
- Modify the commit msg.
---
 arch/arm64/boot/dts/rockchip/rk3576.dtsi | 28 ++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index 28175d8200d5..733449cb88b1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -1496,6 +1496,34 @@ hdmi_out: port@1 {
 			};
 		};
 
+		edp: edp@27dc0000 {
+			compatible = "rockchip,rk3576-edp";
+			reg = <0x0 0x27dc0000 0x0 0x1000>;
+			clocks = <&cru CLK_EDP0_24M>, <&cru PCLK_EDP0>, <&cru HCLK_VO0_ROOT>;
+			clock-names = "dp", "pclk", "hclk";
+			interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&hdptxphy>;
+			phy-names = "dp";
+			power-domains = <&power RK3576_PD_VO0>;
+			resets = <&cru SRST_EDP0_24M>, <&cru SRST_P_EDP0>;
+			reset-names = "dp", "apb";
+			rockchip,grf = <&vo0_grf>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				edp_in: port@0 {
+					reg = <0>;
+				};
+
+				edp_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
 		dp: dp@27e40000 {
 			compatible = "rockchip,rk3576-dp";
 			reg = <0x0 0x27e40000 0x0 0x30000>;
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip