From: Igor Paunovic <royalnet026@gmail.com>
To: Jiaxing Hu <gahing@gahingwoo.com>
Cc: Igor Paunovic <royalnet026@gmail.com>,
Tomeu Vizoso <tomeu@tomeuvizoso.net>,
Heiko Stuebner <heiko@sntech.de>,
Chaoyi Chen <chaoyi.chen@rock-chips.com>,
Alexey Charkov <alchark@flipper.net>,
dri-devel@lists.freedesktop.org,
linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 08/10] accel/rocket: add RK3576 NPU (RKNN) support
Date: Wed, 19 Aug 2026 17:46:32 +0200 [thread overview]
Message-ID: <20260819154634.7584-1-royalnet026@gmail.com> (raw)
In-Reply-To: <20260819105723.632029-1-gahing@gahingwoo.com>
Hi Jiaxing,
A short logistics note so you can plan around me rather than wait on
silence: yes to both. I will read what the vendor stack actually
programs into the output stage on RK3588 (your option A vs a floor
enable), and separately force an output below its zero point through
the open stack, so the two explanations get separated on this SoC.
I am pairing that with the oc=56/88/120 sweep you asked for earlier,
as one measurement session - numbers in the coming days. If either
result is going to gate something in your v9 timing, say so and I will
reorder.
The correction itself, with the control run and the paper-trail rounds
behind it, reads solid from here.
Regards,
Igor
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2026-08-19 15:47 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-12 9:40 [PATCH v7 00/10] accel/rocket: RK3576 NPU (RKNN) enablement Jiaxing Hu
2026-08-12 9:40 ` [PATCH v7 01/10] accel/rocket: take the completion register writes under job_lock Jiaxing Hu
2026-08-12 12:47 ` Igor Paunovic
2026-08-12 9:40 ` [PATCH v7 02/10] dt-bindings: npu: rockchip: add rockchip,rk3576-rknn-core Jiaxing Hu
2026-08-13 7:04 ` Krzysztof Kozlowski
2026-08-12 9:40 ` [PATCH v7 03/10] dt-bindings: power: rockchip: allow resets in a power domain node Jiaxing Hu
2026-08-13 7:06 ` Krzysztof Kozlowski
2026-08-14 8:21 ` Jiaxing Hu
2026-08-12 9:40 ` [PATCH v7 04/10] dt-bindings: iommu: rockchip: allow the RK3576 NPU MMU clock set Jiaxing Hu
2026-08-12 10:45 ` Diederik de Haas
2026-08-13 9:27 ` Jiaxing Hu
2026-08-12 9:41 ` [PATCH v7 05/10] pmdomain/rockchip: add optional per-domain power-on settle delay Jiaxing Hu
2026-08-12 9:41 ` [PATCH v7 06/10] pmdomain/rockchip: cycle optional power-domain resets on power-on Jiaxing Hu
2026-08-12 9:41 ` [PATCH v7 07/10] accel/rocket: select the per-core clock and reset counts from match data Jiaxing Hu
2026-08-12 9:41 ` [PATCH v7 08/10] accel/rocket: add RK3576 NPU (RKNN) support Jiaxing Hu
2026-08-12 12:48 ` Igor Paunovic
2026-08-13 9:26 ` Jiaxing Hu
2026-08-13 9:56 ` Igor Paunovic
2026-08-14 8:26 ` Jiaxing Hu
2026-08-14 11:08 ` Igor Paunovic
[not found] ` <20260814110841.11238-1-royalnet026@gmail.com>
2026-08-15 3:12 ` Jiaxing Hu
2026-08-15 13:05 ` Igor Paunovic
2026-08-16 4:12 ` Jiaxing Hu
2026-08-16 18:53 ` Igor Paunovic
2026-08-16 19:58 ` Jiaxing Hu
2026-08-16 20:25 ` Igor Paunovic
2026-08-17 8:31 ` Jiaxing Hu
2026-08-17 9:45 ` Jiaxing Hu
2026-08-17 10:00 ` Igor Paunovic
2026-08-17 10:20 ` Jiaxing Hu
2026-08-17 11:05 ` Igor Paunovic
2026-08-19 10:57 ` Jiaxing Hu
2026-08-19 15:46 ` Igor Paunovic [this message]
2026-08-19 18:48 ` Igor Paunovic
2026-08-12 9:41 ` [PATCH v7 09/10] arm64: dts: rockchip: rk3576: add NPU (RKNN) nodes Jiaxing Hu
2026-08-12 9:41 ` [PATCH v7 10/10] arm64: dts: rockchip: rk3576-rock-4d: enable NPU Jiaxing Hu
2026-08-12 10:20 ` Chaoyi Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260819154634.7584-1-royalnet026@gmail.com \
--to=royalnet026@gmail.com \
--cc=alchark@flipper.net \
--cc=chaoyi.chen@rock-chips.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=gahing@gahingwoo.com \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=tomeu@tomeuvizoso.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox