From: Jiaxing Hu <gahing@gahingwoo.com>
To: tomeu@tomeuvizoso.net, heiko@sntech.de, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, joro@8bytes.org,
will@kernel.org, robin.murphy@arm.com, ulfh@kernel.org,
p.zabel@pengutronix.de, ogabbay@kernel.org,
zhangqing@rock-chips.com
Cc: royalnet026@gmail.com, abel.vesa@oss.qualcomm.com,
sebastian.reichel@collabora.com, sidong.yang@furiosa.ai,
u.kleine-koenig@baylibre.com, chaoyi.chen@rock-chips.com,
diederik@cknow-tech.com, alchark@flipper.net,
dri-devel@lists.freedesktop.org,
linux-rockchip@lists.infradead.org, iommu@lists.linux.dev,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Jiaxing Hu <gahing@gahingwoo.com>
Subject: [PATCH v12 01/14] accel/rocket: request the core clocks by name
Date: Sat, 12 Sep 2026 18:50:40 +1200 [thread overview]
Message-ID: <20260912065053.1519165-2-gahing@gahingwoo.com> (raw)
In-Reply-To: <20260912065053.1519165-1-gahing@gahingwoo.com>
From: Igor Paunovic <royalnet026@gmail.com>
rocket_core_init() hands core->clks to devm_clk_bulk_get() without ever
setting the .id members. The rocket_core array is allocated with
devm_kcalloc() in rocket_device_init(), and rocket_probe() only fills in
.rdev, .dev and .index, so all four clk_bulk_data entries are requested
with a NULL con_id (unlike core->resets, whose ids are set a few lines
above).
clk_get(dev, NULL) ends up in of_clk_get_hw(np, 0, NULL), and
of_parse_clkspec() only consults "clock-names" when a name was passed, so
the index stays 0 for all four entries. Every entry therefore ends up
holding a handle to the *first* clock of the DT "clocks" property, i.e.
ACLK_NPUn. Nothing fails: probe succeeds and the driver believes it owns
four different clocks.
The consequence is that rocket_device_runtime_resume() prepares and enables
the AXI clock four times, while hclk, pclk and - most importantly - the NPU
compute clock ("npu", SCMI_CLK_NPU on RK3588) are never prepared or enabled
by this driver at all. The NPU still works only because the Rockchip
power-domain driver sets GENPD_FLAG_PM_CLK and its attach_dev() callback
walks the device node with of_clk_get() and adds every clock to the pm_clk
list, so genpd happens to keep the remaining clocks running. The bug is
therefore latent today, but it means the driver holds no reference to the
clock that actually feeds the NPU, which stands in the way of any future
frequency scaling (OPP/devfreq) work.
Found on an Orange Pi 5 Plus (RK3588) by reading the live clock tree:
/sys/kernel/debug/clk/clk_summary shows four "fdab0000.npu" consumer
handles on aclk_npu0 (and likewise on aclk_npu1/aclk_npu2 for the other two
cores), while hclk_npu0, pclk_npu_root and scmi_clk_npu have no
"fdab0000.npu" consumer at all - their only consumers are the
"npu@fdab0000" handles created by the power-domain driver via of_clk_get().
Set the ids explicitly, in the order mandated by the binding
(Documentation/devicetree/bindings/npu/rockchip,rk3588-rknn-core.yaml):
aclk, hclk, npu, pclk. After the change the driver holds one handle per
distinct clock and clk_bulk_prepare_enable() covers all four.
Note that this is a user-visible tightening for out-of-tree DTs: the old
NULL-id requests resolved by index and succeeded no matter what
"clock-names" contained, while the named requests fail probe with -ENOENT
when one of the four names is missing. That is the right outcome for
in-tree users - the binding requires exactly these four clock-names and
rk3588-base.dtsi carries them on all three cores - but a DT that relied on
the permissive lookup goes from silently running on the wrong clock handles
to not probing at all, so record the change here where git log will find
it.
Fixes: ed98261b4168 ("accel/rocket: Add a new driver for Rockchip's NPU")
Signed-off-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Sidong Yang <sidong.yang@furiosa.ai>
Tested-by: Diederik de Haas <diederik@cknow-tech.com> # NanoPC-T6 LTS, NanoPC-T6 Plus
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Jiaxing Hu <gahing@gahingwoo.com>
Signed-off-by: Jiaxing Hu <gahing@gahingwoo.com>
---
drivers/accel/rocket/rocket_core.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/accel/rocket/rocket_core.c b/drivers/accel/rocket/rocket_core.c
index b3b2fa9ba..5dd260bac 100644
--- a/drivers/accel/rocket/rocket_core.c
+++ b/drivers/accel/rocket/rocket_core.c
@@ -28,6 +28,10 @@ int rocket_core_init(struct rocket_core *core)
if (err)
return dev_err_probe(dev, err, "failed to get resets for core %d\n", core->index);
+ core->clks[0].id = "aclk";
+ core->clks[1].id = "hclk";
+ core->clks[2].id = "npu";
+ core->clks[3].id = "pclk";
err = devm_clk_bulk_get(dev, ARRAY_SIZE(core->clks), core->clks);
if (err)
return dev_err_probe(dev, err, "failed to get clocks for core %d\n", core->index);
--
2.43.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2026-09-12 6:51 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-12 6:50 [PATCH v12 00/14] accel/rocket: RK3576 NPU (RKNN) enablement Jiaxing Hu
2026-09-12 6:50 ` Jiaxing Hu [this message]
2026-09-12 6:50 ` [PATCH v12 02/14] accel/rocket: take the completion register writes under job_lock Jiaxing Hu
2026-09-12 6:50 ` [PATCH v12 03/14] accel/rocket: wait for a running IRQ handler before resetting a core Jiaxing Hu
2026-09-12 11:37 ` Igor Paunovic
2026-09-12 22:48 ` Jiaxing Hu
2026-09-13 0:13 ` Igor Paunovic
2026-09-12 6:50 ` [PATCH v12 04/14] accel/rocket: let the core suspend after a reset Jiaxing Hu
2026-09-12 6:50 ` [PATCH v12 05/14] accel/rocket: factor the completion tail out of the IRQ handler Jiaxing Hu
2026-09-12 6:50 ` [PATCH v12 06/14] dt-bindings: npu: rockchip: add rockchip,rk3576-rknn-core Jiaxing Hu
2026-09-12 6:50 ` [PATCH v12 07/14] dt-bindings: power: rockchip: allow resets in a power domain node Jiaxing Hu
2026-09-12 6:50 ` [PATCH v12 08/14] dt-bindings: iommu: rockchip: describe the RK3576 NPU MMU Jiaxing Hu
2026-09-12 6:50 ` [PATCH v12 09/14] pmdomain: rockchip: add optional per-domain power-on settle delay Jiaxing Hu
2026-09-12 6:50 ` [PATCH v12 10/14] pmdomain: rockchip: cycle optional power-domain resets on power-on Jiaxing Hu
2026-09-12 6:50 ` [PATCH v12 11/14] accel/rocket: select the per-core clock and reset counts from match data Jiaxing Hu
2026-09-12 6:50 ` [PATCH v12 12/14] accel/rocket: add RK3576 NPU (RKNN) support Jiaxing Hu
2026-09-12 6:50 ` [PATCH v12 13/14] arm64: dts: rockchip: add NPU (RKNN) nodes to rk3576 Jiaxing Hu
2026-09-12 6:50 ` [PATCH v12 14/14] arm64: dts: rockchip: enable the NPU on rk3576-rock-4d Jiaxing Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260912065053.1519165-2-gahing@gahingwoo.com \
--to=gahing@gahingwoo.com \
--cc=abel.vesa@oss.qualcomm.com \
--cc=alchark@flipper.net \
--cc=chaoyi.chen@rock-chips.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=diederik@cknow-tech.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=ogabbay@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=royalnet026@gmail.com \
--cc=sebastian.reichel@collabora.com \
--cc=sidong.yang@furiosa.ai \
--cc=tomeu@tomeuvizoso.net \
--cc=u.kleine-koenig@baylibre.com \
--cc=ulfh@kernel.org \
--cc=will@kernel.org \
--cc=zhangqing@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox