Linux-Rockchip Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Chris Morgan <macroalpha82@gmail.com>
To: linux-rockchip@lists.infradead.org
Cc: mfd@lists.linux.dev, linux-pm@vger.kernel.org,
	maccraft123mc@gmail.com, heiko@sntech.de, lee@kernel.org,
	sre@kernel.org, Chris Morgan <macromorgan@hotmail.com>,
	Zetarancio <zetarancio@users.noreply.github.com>
Subject: [PATCH V4 6/7] power: supply: rk817-charger: Clear SYS_CAN_SD reg by default
Date: Wed, 11 Nov 2026 14:56:26 -0600	[thread overview]
Message-ID: <20261111205627.56652-7-macroalpha82@gmail.com> (raw)
In-Reply-To: <20261111205627.56652-1-macroalpha82@gmail.com>

From: Chris Morgan <macromorgan@hotmail.com>

The BSP driver for the rk817 charger by default clears the SYS_CAN_SD.
This register tells the PMIC that the system voltage can be shut down in
battery off mode. Though the BSP driver also included a way to bypass
this behavior, no boards have been observed using the override.

When this register is not cleared, it can result in a persistent power
drain on certain devices while the device is off, as observed by users.

Fixes: 11cb8da0189b ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Suggested-by: Zetarancio <zetarancio@users.noreply.github.com>
Acked-by: Lee Jones <lee@kernel.org>
---
 drivers/power/supply/rk817_charger.c | 9 +++++++++
 include/linux/mfd/rk808.h            | 1 +
 2 files changed, 10 insertions(+)

diff --git a/drivers/power/supply/rk817_charger.c b/drivers/power/supply/rk817_charger.c
index d334941ade5c..9a8d14691f9a 100644
--- a/drivers/power/supply/rk817_charger.c
+++ b/drivers/power/supply/rk817_charger.c
@@ -1187,6 +1187,15 @@ static int rk817_battery_init(struct rk817_charger *charger,
 	regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_ILIM_EN,
 			  (0x01 << 3));
 
+	/*
+	 * Do not shut down the system voltage in bat_off mode. The BSP driver
+	 * cleared this bit for all devices unless a specific device tree
+	 * parameter was used, however I have yet to see such parameter on any
+	 * device.
+	 */
+	regmap_clear_bits(rk808->regmap,
+			  RK817_PMIC_CHRG_TERM, RK817_SYS_CAN_SD);
+
 	return 0;
 }
 
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 72419d311626..2bc58de53d82 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -1297,6 +1297,7 @@ enum rk809_reg_id {
 #define RK817_USB_ILIM_EN		(0x01 << 3)
 #define RK817_USB_ILIM_SEL		(0x07 << 0)
 #define RK817_PMIC_CHRG_TERM		0xe6
+#define RK817_SYS_CAN_SD		(0x01 << 7)
 #define RK817_CHRG_TERM_ANA_DIG		(0x01 << 2)
 #define RK817_CHRG_TERM_ANA_SEL		(0x03 << 0)
 #define RK817_CHRG_EN			(0x01 << 6)
-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  parent reply	other threads:[~2026-11-11 20:56 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-11 20:56 [PATCH V4 0/7] Fix Incorrect State of Charge for RK817 Chris Morgan
2026-11-11 20:56 ` [PATCH V4 1/7] power: supply: rk817-charger: correct spelling of coulomb Chris Morgan
2026-11-11 20:56 ` [PATCH V4 2/7] power: supply: rk817-charger: Fix NVRAM SoC value Chris Morgan
2026-11-11 20:56 ` [PATCH V4 3/7] power: supply: rk817-charger: simplify re-initializing coulomb counter Chris Morgan
2026-11-11 20:56 ` [PATCH V4 4/7] power: supply: rk817-charger: Resolve boot state of charge from " Chris Morgan
2026-11-11 20:56 ` [PATCH V4 5/7] power: supply: rk817-charger: Expose boot voltage and OCV values Chris Morgan
2026-11-11 20:56 ` Chris Morgan [this message]
2026-11-11 20:56 ` [PATCH V4 7/7] power: supply: rk817-charger: Clear full charge cal on resume Chris Morgan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261111205627.56652-7-macroalpha82@gmail.com \
    --to=macroalpha82@gmail.com \
    --cc=heiko@sntech.de \
    --cc=lee@kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=maccraft123mc@gmail.com \
    --cc=macromorgan@hotmail.com \
    --cc=mfd@lists.linux.dev \
    --cc=sre@kernel.org \
    --cc=zetarancio@users.noreply.github.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox