[PATCH 0/4] arm64: dts: rockchip: Add Radxa ROCK 3B

[PATCH 0/4] arm64: dts: rockchip: Add Radxa ROCK 3B

[Jonas Karlman]

This series adds initial support for the Radxa ROCK 3B board.

The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form
factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community
version based on the RK3568 SoC and an industrial version based on the
RK3568J SoC.

Schematic for ROCK 3B can be found at:
https://dl.radxa.com/rock3/docs/hw/3b/Radxa_ROCK_3B_V1.51_SCH.pdf

Jonas Karlman (4):
  dt-bindings: mfd: rk809: Fix vcc8 and vcc9-supply description
  dt-bindings: mfd: rk809: Add audio codec properties
  dt-bindings: arm: rockchip: Add Radxa ROCK 3B
  arm64: dts: rockchip: Add Radxa ROCK 3B

 .../devicetree/bindings/arm/rockchip.yaml     |   5 +
 .../bindings/mfd/rockchip,rk809.yaml          |  38 +-
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3568-rock-3b.dts      | 773 ++++++++++++++++++
 4 files changed, 814 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts

-- 
2.43.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 1/4] dt-bindings: mfd: rk809: Fix vcc8 and vcc9-supply description

[Jonas Karlman]

As can be seen in the RK809 datasheet BUCK5 and SWOUT1 share an input
supply, vcc9, and SWOUT2 use vcc8 as the input supply.

Correct the description for vcc8-supply and vcc9-supply to reflect this.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
 Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
index 839c0521f1e5..c951056b8b4d 100644
--- a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
@@ -78,11 +78,11 @@ properties:
 
   vcc8-supply:
     description:
-      The input supply for SWITCH_REG1.
+      The input supply for SWITCH_REG2.
 
   vcc9-supply:
     description:
-      The input supply for DCDC_REG5 and SWITCH_REG2.
+      The input supply for DCDC_REG5 and SWITCH_REG1.
 
   regulators:
     type: object
-- 
2.43.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 1/4] dt-bindings: mfd: rk809: Fix vcc8 and vcc9-supply description

[Krzysztof Kozlowski]

On 05/05/2024 15:41, Jonas Karlman wrote:
> As can be seen in the RK809 datasheet BUCK5 and SWOUT1 share an input
> supply, vcc9, and SWOUT2 use vcc8 as the input supply.
> 
> Correct the description for vcc8-supply and vcc9-supply to reflect this.
> 
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


---

This is an automated instruction, just in case, because many review tags
are being ignored. If you know the process, you can skip it (please do
not feel offended by me posting it here - no bad intentions intended).
If you do not know the process, here is a short explanation:

Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tag is "received", when
provided in a message replied to you on the mailing list. Tools like b4
can help here. However, there's no need to repost patches *only* to add
the tags. The upstream maintainer will do that for tags received on the
version they apply.

https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577

Best regards,
Krzysztof


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 2/4] dt-bindings: mfd: rk809: Add audio codec properties

[Jonas Karlman]

Similar to RK817 the RK809 also integrates a complete audio system.

Add audio codec properties to binding to reflect this.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
 .../bindings/mfd/rockchip,rk809.yaml          | 34 ++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
index c951056b8b4d..b78e1b090105 100644
--- a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
@@ -12,7 +12,7 @@ maintainers:
 
 description: |
   Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD
-  that includes regulators, an RTC, and power button.
+  that includes regulators, an RTC, a power button and an audio codec.
 
 properties:
   compatible:
@@ -93,6 +93,34 @@ properties:
         unevaluatedProperties: false
     unevaluatedProperties: false
 
+  clocks:
+    description:
+      The input clock for the audio codec.
+
+  clock-names:
+    description:
+      The clock name for the codec clock.
+    items:
+      - const: mclk
+
+  '#sound-dai-cells':
+    description:
+      Needed for the interpretation of sound dais.
+    const: 0
+
+  codec:
+    description: |
+      The child node for the codec to hold additional properties. If no
+      additional properties are required for the codec, this node can be
+      omitted.
+    type: object
+    additionalProperties: false
+    properties:
+      rockchip,mic-in-differential:
+        type: boolean
+        description:
+          Describes if the microphone uses differential mode.
+
 allOf:
   - if:
       properties:
@@ -284,5 +312,9 @@ examples:
                     };
                 };
             };
+
+            rk809_codec: codec {
+                rockchip,mic-in-differential;
+            };
         };
     };
-- 
2.43.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 2/4] dt-bindings: mfd: rk809: Add audio codec properties

[Rob Herring (Arm)]

On Sun, 05 May 2024 13:41:12 +0000, Jonas Karlman wrote:
> Similar to RK817 the RK809 also integrates a complete audio system.
> 
> Add audio codec properties to binding to reflect this.
> 
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
> ---
>  .../bindings/mfd/rockchip,rk809.yaml          | 34 ++++++++++++++++++-
>  1 file changed, 33 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/rockchip,rk809.example.dtb: pmic@1b: 'codec' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/mfd/rockchip,rk808.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240505134120.2828885-3-jonas@kwiboo.se

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 2/4] dt-bindings: mfd: rk809: Add audio codec properties

[Krzysztof Kozlowski]

On 05/05/2024 15:41, Jonas Karlman wrote:
> Similar to RK817 the RK809 also integrates a complete audio system.
> 
> Add audio codec properties to binding to reflect this.
> 
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>

Except sending untested patches...

> ---
>  .../bindings/mfd/rockchip,rk809.yaml          | 34 ++++++++++++++++++-
>  1 file changed, 33 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
> index c951056b8b4d..b78e1b090105 100644
> --- a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
> +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
> @@ -12,7 +12,7 @@ maintainers:
>  
>  description: |
>    Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD
> -  that includes regulators, an RTC, and power button.
> +  that includes regulators, an RTC, a power button and an audio codec.
>  
>  properties:
>    compatible:
> @@ -93,6 +93,34 @@ properties:
>          unevaluatedProperties: false
>      unevaluatedProperties: false
>  
> +  clocks:
> +    description:
> +      The input clock for the audio codec.

No, this allows anything. You must be here specific, see example-schema.
maxItems: 1

Drop description, redundant.

> +
> +  clock-names:
> +    description:
> +      The clock name for the codec clock.

Drop description, redundant.

> +    items:
> +      - const: mclk
> +
> +  '#sound-dai-cells':
> +    description:
> +      Needed for the interpretation of sound dais.

Drop description, redundant. Do you see it anywhere for such properties?

> +    const: 0


Missing ref to dai-common in your allOf (again: take a look how other
bindings are doing it).


> +
> +  codec:
> +    description: |

Do not need '|' unless you need to preserve formatting.

> +      The child node for the codec to hold additional properties. If no
> +      additional properties are required for the codec, this node can be
> +      omitted.

That's useless description. Describe hardware, not syntax. This must say
what this node represents.

Anyway drop it. You do not have any resources there, so put properties
in top level.


> +    type: object
> +    additionalProperties: false
> +    properties:
> +      rockchip,mic-in-differential:
> +        type: boolean
> +        description:
> +          Describes if the microphone uses differential mode.

Your description copies property name. Do not describe the syntax
"Description describes", but say what is it.

> +
>  allOf:
>    - if:
>        properties:
> @@ -284,5 +312,9 @@ examples:
>                      };
>                  };
>              };
> +
> +            rk809_codec: codec {
> +                rockchip,mic-in-differential;

Missing all other properties. Make your example complete.

Best regards,
Krzysztof


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 2/4] dt-bindings: mfd: rk809: Add audio codec properties

[Jonas Karlman]

Hi Krzysztof,

On 2024-05-06 12:47, Krzysztof Kozlowski wrote:
> On 05/05/2024 15:41, Jonas Karlman wrote:
>> Similar to RK817 the RK809 also integrates a complete audio system.
>>
>> Add audio codec properties to binding to reflect this.
>>
>> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
> 
> Except sending untested patches...

This patch was a 1:1 copy from rockchip,rk817.yaml so I expected
everything to already be correct, my bad.

Guess rockchip,rk817.yaml also needs same fixes/changes as listed below.

Will send a v2 with example fixed in a separate patch and try to fix
your remarks on this patch in v2.

> 
>> ---
>>  .../bindings/mfd/rockchip,rk809.yaml          | 34 ++++++++++++++++++-
>>  1 file changed, 33 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
>> index c951056b8b4d..b78e1b090105 100644
>> --- a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
>> +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
>> @@ -12,7 +12,7 @@ maintainers:
>>  
>>  description: |
>>    Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD
>> -  that includes regulators, an RTC, and power button.
>> +  that includes regulators, an RTC, a power button and an audio codec.
>>  
>>  properties:
>>    compatible:
>> @@ -93,6 +93,34 @@ properties:
>>          unevaluatedProperties: false
>>      unevaluatedProperties: false
>>  
>> +  clocks:
>> +    description:
>> +      The input clock for the audio codec.
> 
> No, this allows anything. You must be here specific, see example-schema.
> maxItems: 1
> 
> Drop description, redundant.
> 
>> +
>> +  clock-names:
>> +    description:
>> +      The clock name for the codec clock.
> 
> Drop description, redundant.
> 
>> +    items:
>> +      - const: mclk
>> +
>> +  '#sound-dai-cells':
>> +    description:
>> +      Needed for the interpretation of sound dais.
> 
> Drop description, redundant. Do you see it anywhere for such properties?
> 
>> +    const: 0
> 
> 
> Missing ref to dai-common in your allOf (again: take a look how other
> bindings are doing it).
> 
> 
>> +
>> +  codec:
>> +    description: |
> 
> Do not need '|' unless you need to preserve formatting.
> 
>> +      The child node for the codec to hold additional properties. If no
>> +      additional properties are required for the codec, this node can be
>> +      omitted.
> 
> That's useless description. Describe hardware, not syntax. This must say
> what this node represents.
> 
> Anyway drop it. You do not have any resources there, so put properties
> in top level.

This just tries to follow the rockchip,rk817 binding, not fully sure
about the reasoning behind this node in the the rk817 binding.

RK809/RK817 are very similar and their schema files could possible be
merged.

> 
> 
>> +    type: object
>> +    additionalProperties: false
>> +    properties:
>> +      rockchip,mic-in-differential:
>> +        type: boolean
>> +        description:
>> +          Describes if the microphone uses differential mode.
> 
> Your description copies property name. Do not describe the syntax
> "Description describes", but say what is it.
> 
>> +
>>  allOf:
>>    - if:
>>        properties:
>> @@ -284,5 +312,9 @@ examples:
>>                      };
>>                  };
>>              };
>> +
>> +            rk809_codec: codec {
>> +                rockchip,mic-in-differential;
> 
> Missing all other properties. Make your example complete.

Noticed that the example used in this schema file is for RK808 and not
RK809 so will also add a patch that replaces/fixes the example in v2.

Regards,
Jonas

> 
> Best regards,
> Krzysztof
> 


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 2/4] dt-bindings: mfd: rk809: Add audio codec properties

[Krzysztof Kozlowski]

On 06/05/2024 18:14, Jonas Karlman wrote:
>>
>>> +
>>> +  codec:
>>> +    description: |
>>
>> Do not need '|' unless you need to preserve formatting.
>>
>>> +      The child node for the codec to hold additional properties. If no
>>> +      additional properties are required for the codec, this node can be
>>> +      omitted.
>>
>> That's useless description. Describe hardware, not syntax. This must say
>> what this node represents.
>>
>> Anyway drop it. You do not have any resources there, so put properties
>> in top level.
> 
> This just tries to follow the rockchip,rk817 binding, not fully sure
> about the reasoning behind this node in the the rk817 binding.
> 
> RK809/RK817 are very similar and their schema files could possible be
> merged.

That binding was a conversion from something older, so it might not be
in good shape. At least new binding should follow usual rules/style.


Best regards,
Krzysztof


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 3/4] dt-bindings: arm: rockchip: Add Radxa ROCK 3B

[Jonas Karlman]

Add devicetree binding documentation for the Radxa ROCK 3B board.

The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form
factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community
version based on the RK3568 SoC and an industrial version based on the
RK3568J SoC.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 51cdaabaf0d9..41f2ab79e612 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -799,6 +799,11 @@ properties:
           - const: radxa,rock3a
           - const: rockchip,rk3568
 
+      - description: Radxa ROCK 3B
+        items:
+          - const: radxa,rock-3b
+          - const: rockchip,rk3568
+
       - description: Radxa ROCK 3C
         items:
           - const: radxa,rock-3c
-- 
2.43.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 3/4] dt-bindings: arm: rockchip: Add Radxa ROCK 3B

[Krzysztof Kozlowski]

On 05/05/2024 15:41, Jonas Karlman wrote:
> Add devicetree binding documentation for the Radxa ROCK 3B board.
> 
> The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form
> factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community
> version based on the RK3568 SoC and an industrial version based on the
> RK3568J SoC.
> 
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
> ---
>  Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
> index 51cdaabaf0d9..41f2ab79e612 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
> @@ -799,6 +799,11 @@ properties:
>            - const: radxa,rock3a
>            - const: rockchip,rk3568
>  
> +      - description: Radxa ROCK 3B

Does not look like it matches recent fixups for names.

Best regards,
Krzysztof


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 3/4] dt-bindings: arm: rockchip: Add Radxa ROCK 3B

[Dragan Simic]

Hello Krzysztof,

On 2024-05-06 12:48, Krzysztof Kozlowski wrote:
> On 05/05/2024 15:41, Jonas Karlman wrote:
>> Add devicetree binding documentation for the Radxa ROCK 3B board.
>> 
>> The Radxa ROCK 3B is a single-board computer based on the Pico-ITX 
>> form
>> factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community
>> version based on the RK3568 SoC and an industrial version based on the
>> RK3568J SoC.
>> 
>> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
>> ---
>>  Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
>>  1 file changed, 5 insertions(+)
>> 
>> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml 
>> b/Documentation/devicetree/bindings/arm/rockchip.yaml
>> index 51cdaabaf0d9..41f2ab79e612 100644
>> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
>> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
>> @@ -799,6 +799,11 @@ properties:
>>            - const: radxa,rock3a
>>            - const: rockchip,rk3568
>> 
>> +      - description: Radxa ROCK 3B
> 
> Does not look like it matches recent fixups for names.

Actually, I can confirm that "Radxa ROCK 3B" conforms to the recently
employed naming scheme for Radxa boards.

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 3/4] dt-bindings: arm: rockchip: Add Radxa ROCK 3B

[Krzysztof Kozlowski]

On 06/05/2024 13:46, Dragan Simic wrote:
> Hello Krzysztof,
> 
> On 2024-05-06 12:48, Krzysztof Kozlowski wrote:
>> On 05/05/2024 15:41, Jonas Karlman wrote:
>>> Add devicetree binding documentation for the Radxa ROCK 3B board.
>>>
>>> The Radxa ROCK 3B is a single-board computer based on the Pico-ITX 
>>> form
>>> factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community
>>> version based on the RK3568 SoC and an industrial version based on the
>>> RK3568J SoC.
>>>
>>> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
>>> ---
>>>  Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
>>>  1 file changed, 5 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml 
>>> b/Documentation/devicetree/bindings/arm/rockchip.yaml
>>> index 51cdaabaf0d9..41f2ab79e612 100644
>>> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
>>> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
>>> @@ -799,6 +799,11 @@ properties:
>>>            - const: radxa,rock3a
>>>            - const: rockchip,rk3568
>>>
>>> +      - description: Radxa ROCK 3B
>>
>> Does not look like it matches recent fixups for names.
> 
> Actually, I can confirm that "Radxa ROCK 3B" conforms to the recently
> employed naming scheme for Radxa boards.

Hm, I could have looked at older code.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 4/4] arm64: dts: rockchip: Add Radxa ROCK 3B

[Jonas Karlman]

The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form
factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community
version based on the RK3568 SoC and an industrial version based on the
RK3568J SoC.

This adds initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and
USB.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
Following issue is reported by dtbs_check and is fixed by patch at [1]:

  hdmi@fe0a0000: Unevaluated properties are not allowed ('#sound-dai-cells' was unexpected)
  from schema $id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml#

[1] https://lore.kernel.org/linux-rockchip/3a035c16-75b5-471d-aa9d-e91c2bb9f8d0@gmail.com/
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3568-rock-3b.dts      | 773 ++++++++++++++++++
 2 files changed, 774 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 1a4b154121fa..18784b891f99 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
new file mode 100644
index 000000000000..aa86902c77d4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
@@ -0,0 +1,773 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Radxa ROCK 3B";
+	compatible = "radxa,rock-3b", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_ir>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led>;
+		};
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Analog RK809";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <5000000>;
+		reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* pi6c pcie clock generator */
+	vcc3v3_pi6c_03: vcc3v3-pi6c-03-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwren_h>;
+		regulator-name = "vcc3v3_pi6c_03";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <10000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys2: vcc3v3-sys2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys2";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren_h>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_pwren_h>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+	clock_in_out = "input";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus
+		     &gmac0_clkinout>;
+	status = "okay";
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+	clock_in_out = "input";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus
+		     &gmac1m1_clkinout>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		clock-names = "mclk";
+		clock-output-names = "rk809-clkout1", "rk809-clkout2";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+		#sound-dai-cells = <0>;
+		system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "rtcic_32kout";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtcic_int_l>;
+		wakeup-source;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx
+		     &i2s1m0_lrcktx
+		     &i2s1m0_sdi0
+		     &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20m1_pins>;
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys2>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x2m1_pins>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	bluetooth {
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host_h: bt-wake-host-h {
+			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		host_wake_bt_h: host-wake-bt-h {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir-receiver {
+		pwm3_ir: pwm3-ir {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led: led {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_pwren_h: pcie-pwren-h {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rtc {
+		rtcic_int_l: rtcic-int-l {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		usb_host_pwren_h: usb-host-pwren-h {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_otg_pwren_h: usb-otg-pwren-h {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_wake_host_h: wifi-wake-host-h {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_clk &sdmmc2m0_cmd>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys2>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "disabled";
+};
+
+&sfc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn &uart8m0_rtsn>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.43.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip