[PATCH v3 00/11] ARM: sunxi: add Allwinner B288 and the PocketBook Verse

[PATCH v3 00/11] ARM: sunxi: add Allwinner B288 and the PocketBook Verse

[Pablo Mazzini]

The Allwinner B288 (sun8iw10p1) is a dual Cortex-A7 SoC used in e-book
readers. This series adds the CCU and pin controller drivers, the RTC,
I2C, NMI and watchdog compatibles, the SoC .dtsi, and one board: the
PocketBook Verse (PB629), a 6" reader.

The B288 is closest to the A64: most of its PLLs are bit-identical.
The clock and pin descriptions come from Allwinner's BSP, cross-checked
against ccu-sun50i-a64.c. Tested on a PB629, boots to userspace.

The pin controller relies on "pinctrl: sunxi: dt: number the IRQ banks
from the first one that has IRQs" for correct PIO interrupt mapping.

Changes since v2:
  - Drop the MMC binding patch, applied by Ulf.
  - Rebase onto sunxi/for-next.
  - Constrain the RTC clock outputs and pinctrl interrupts in the
    bindings (Sashiko).
  - Add a B288 watchdog compatible (Andre).
  - DTS: drop the memory node, the arch timer workaround and the
    sunxi.c entry; add disable-wp and the eMMC 1.8V modes; DLDO1 no
    longer always-on; mainline pin function names (Andre).

Changes since v1:
  - Add this cover letter.
  - Drop both new bindings; add the compatibles to the existing
    allwinner,sun4i-a10-{ccu,pinctrl}.yaml instead.
  - Rewrite the pinctrl driver in the DT-provided pinmux style.

Pablo Mazzini (11):
  dt-bindings: clock: sun4i-a10-ccu: add Allwinner B288
  clk: sunxi-ng: add Allwinner B288 CCU driver
  dt-bindings: pinctrl: sun4i-a10: add Allwinner B288
  pinctrl: sunxi: add Allwinner B288 pin controller driver
  dt-bindings: rtc: sun6i-a31: add Allwinner B288
  rtc: sun6i: add Allwinner B288 compatible
  dt-bindings: i2c: mv64xxx: add Allwinner B288
  dt-bindings: interrupt-controller: add Allwinner B288 NMI
  dt-bindings: watchdog: sun4i-a10-wdt: add Allwinner B288
  dt-bindings: arm: sunxi: add PocketBook Verse
  ARM: dts: allwinner: add B288 and the PocketBook Verse

 .../devicetree/bindings/arm/sunxi.yaml        |   5 +
 .../clock/allwinner,sun4i-a10-ccu.yaml        |   1 +
 .../bindings/i2c/marvell,mv64xxx-i2c.yaml     |   1 +
 .../allwinner,sun7i-a20-sc-nmi.yaml           |   1 +
 .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml  |  22 +
 .../bindings/rtc/allwinner,sun6i-a31-rtc.yaml |   3 +
 .../watchdog/allwinner,sun4i-a10-wdt.yaml     |   1 +
 arch/arm/boot/dts/allwinner/Makefile          |   1 +
 .../allwinner/sun8i-b288-pocketbook-verse.dts | 114 ++++
 arch/arm/boot/dts/allwinner/sun8i-b288.dtsi   | 290 ++++++++
 drivers/clk/sunxi-ng/Kconfig                  |   5 +
 drivers/clk/sunxi-ng/Makefile                 |   1 +
 drivers/clk/sunxi-ng/ccu-sun8i-b288.c         | 644 ++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun8i-b288.h         |  10 +
 drivers/pinctrl/sunxi/Kconfig                 |  10 +
 drivers/pinctrl/sunxi/Makefile                |   1 +
 drivers/pinctrl/sunxi/pinctrl-sun8i-b288.c    |  49 ++
 drivers/rtc/rtc-sun6i.c                       |   1 +
 include/dt-bindings/clock/sun8i-b288-ccu.h    |  82 +++
 include/dt-bindings/reset/sun8i-b288-ccu.h    |  45 ++
 20 files changed, 1287 insertions(+)
 create mode 100644 arch/arm/boot/dts/allwinner/sun8i-b288-pocketbook-verse.dts
 create mode 100644 arch/arm/boot/dts/allwinner/sun8i-b288.dtsi
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-b288.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-b288.h
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-b288.c
 create mode 100644 include/dt-bindings/clock/sun8i-b288-ccu.h
 create mode 100644 include/dt-bindings/reset/sun8i-b288-ccu.h

-- 
2.52.0

[PATCH v3 05/11] dt-bindings: rtc: sun6i-a31: add Allwinner B288

[Pablo Mazzini]

The B288 RTC wires one alarm interrupt, not two.

Signed-off-by: Pablo Mazzini <pmazzini@gmail.com>
---
 .../devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml       | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
index f2b91186ed37..ebe35f893f8c 100644
--- a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
@@ -19,6 +19,7 @@ properties:
       - enum:
           - allwinner,sun6i-a31-rtc
           - allwinner,sun8i-a23-rtc
+          - allwinner,sun8i-b288-rtc
           - allwinner,sun8i-h3-rtc
           - allwinner,sun8i-r40-rtc
           - allwinner,sun8i-v3-rtc
@@ -82,6 +83,7 @@ allOf:
           contains:
             enum:
               - allwinner,sun8i-a23-rtc
+              - allwinner,sun8i-b288-rtc
               - allwinner,sun8i-r40-rtc
               - allwinner,sun8i-v3-rtc
 
@@ -162,6 +164,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - allwinner,sun8i-b288-rtc
               - allwinner,sun8i-r40-rtc
               - allwinner,sun50i-h616-rtc
               - allwinner,sun50i-r329-rtc
-- 
2.52.0

[PATCH v3 06/11] rtc: sun6i: add Allwinner B288 compatible

[Pablo Mazzini]

The driver only uses one alarm interrupt, so no functional change.

Signed-off-by: Pablo Mazzini <pmazzini@gmail.com>
---
 drivers/rtc/rtc-sun6i.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c
index 7fc60880e409..cd6ac5bb20cd 100644
--- a/drivers/rtc/rtc-sun6i.c
+++ b/drivers/rtc/rtc-sun6i.c
@@ -859,6 +859,7 @@ static int sun6i_rtc_probe(struct platform_device *pdev)
 static const struct of_device_id sun6i_rtc_dt_ids[] = {
 	{ .compatible = "allwinner,sun6i-a31-rtc" },
 	{ .compatible = "allwinner,sun8i-a23-rtc" },
+	{ .compatible = "allwinner,sun8i-b288-rtc" },
 	{ .compatible = "allwinner,sun8i-h3-rtc" },
 	{ .compatible = "allwinner,sun8i-r40-rtc" },
 	{ .compatible = "allwinner,sun8i-v3-rtc" },
-- 
2.52.0

Re: [PATCH v3 05/11] dt-bindings: rtc: sun6i-a31: add Allwinner B288

[sashiko-bot]

> The B288 RTC wires one alarm interrupt, not two.
> 
> Signed-off-by: Pablo Mazzini <pmazzini@gmail.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261005202731.153971-1-pmazzini@gmail.com?part=5

Re: [PATCH v3 06/11] rtc: sun6i: add Allwinner B288 compatible

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] rtc: sun6i: missing clock provider initialization for b288
--

commit e9a7236a84b632280651176f5049d0cbdc7cb29a
Author: Pablo Mazzini <pmazzini@gmail.com>

rtc: sun6i: add Allwinner B288 compatible

This commit adds the "allwinner,sun8i-b288-rtc" compatible string to the
sun6i RTC driver's device tree match table. This enables the driver to
probe on the Allwinner B288 platform.

> diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c
> index 7fc60880e4094..cd6ac5bb20cdc 100644
> --- a/drivers/rtc/rtc-sun6i.c
> +++ b/drivers/rtc/rtc-sun6i.c
> @@ -859,6 +859,7 @@ static int sun6i_rtc_probe(struct platform_device *pdev)
>  static const struct of_device_id sun6i_rtc_dt_ids[] = {
>  	{ .compatible = "allwinner,sun6i-a31-rtc" },
>  	{ .compatible = "allwinner,sun8i-a23-rtc" },
> +	{ .compatible = "allwinner,sun8i-b288-rtc" },

[Severity: Medium]
Does this compatible string also need a corresponding CLK_OF_DECLARE_DRIVER()
declaration to initialize the early clocks?

Without the declaration, the RTC driver fails to register as a clock
provider, rendering its clocks unavailable to the Common Clock Framework
even though the device tree binding specifies #clock-cells = <1> and
clock-output-names.

While the current in-tree sun8i-b288.dtsi added later in the series
relies on a root fixed-clock for osc32k and does not consume the RTC
clocks directly, any future board or peripheral attempting to legitimately
consume them will fail to resolve the clocks and hang with -EPROBE_DEFER.

>  	{ .compatible = "allwinner,sun8i-h3-rtc" },
>  	{ .compatible = "allwinner,sun8i-r40-rtc" },
>  	{ .compatible = "allwinner,sun8i-v3-rtc" },

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261005202731.153971-1-pmazzini@gmail.com?part=6

Re: [PATCH v3 05/11] dt-bindings: rtc: sun6i-a31: add Allwinner B288

[Rob Herring (Arm)]

On Mon, 05 Oct 2026 21:27:25 +0100, Pablo Mazzini wrote:
> The B288 RTC wires one alarm interrupt, not two.
> 
> Signed-off-by: Pablo Mazzini <pmazzini@gmail.com>
> ---
>  .../devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml       | 3 +++
>  1 file changed, 3 insertions(+)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>