[rtc-linux] Re: [PATCH 1/2] Documentation: devicetree: add epson rx6110 binding

[Steffen Trumtrar <s.trumtrar@pengutronix.de>]

On Tue, Nov 24, 2015 at 05:54:00PM -0600, Rob Herring wrote:
> On Tue, Nov 24, 2015 at 11:38:52AM +0100, Steffen Trumtrar wrote:
> > Add the binding documentation for the Epson RX6110 RTC.
> > 
> > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> > ---
> > I'm not sure what the current policy for such simple SPI bindings is.
> > Are they necessary?
> 
> Yes. We do have trivial-devices.txt for i2c. We could do one for spi. 
> Although, you need the mode configuration for each device, so spi is not 
> so trivial.
> 

Very good. I thought so.

> > 
> >  .../devicetree/bindings/rtc/epson,rtc-rx6110.txt   | 25 ++++++++++++++++++++++
> >  1 file changed, 25 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/rtc/epson,rtc-rx6110.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/rtc/epson,rtc-rx6110.txt b/Documentation/devicetree/bindings/rtc/epson,rtc-rx6110.txt
> > new file mode 100644
> > index 000000000000..7ce7ae761657
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/rtc/epson,rtc-rx6110.txt
> > @@ -0,0 +1,25 @@
> > +Epson RX6110 Real Time Clock
> > +============================
> > +
> > +The Epson RX6110 can be used with SPI or I2C busses. The kind of
> > +bus depends on the SPISEL pin and can not be configured via software.
> 
> Can you document I2C mode. It should just be the compatible and reg 
> properties.
> 

Okay, will do.

Thanks,
Steffen

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.