[rtc-linux] [PATCH 0/4] clk/mfd/regulator/rtc: Enable compile testing for some Maxim/Samsung drivers

[rtc-linux] [PATCH 0/4] clk/mfd/regulator/rtc: Enable compile testing for some Maxim/Samsung drivers

[Krzysztof Kozlowski]

Hi,

Some of the Maxim and Samsung PMIC/MUIC drivers can be safely
compile tested to increase build-test coverage.

Rebased on next-20160930.
Patches do not depend on each-other, please pick up as you wish.

I compile-tested it on ~10 architectures, but not on all of possibilities.
Please wait few days before applying so the 0-day robots could parse
it and find possible non-compilable issues.

Best regards,
Krzysztof


Krzysztof Kozlowski (4):
  clk: Enable compile testing for s2mps11 and max77686
  regulator: Enable compile testing for Maxim and Samsung PMIC drivers
  rtc: Enable compile testing for Maxim and Samsung drivers
  mfd: Enable compile testing for max77620 and max77686

 drivers/clk/Kconfig       |  4 ++--
 drivers/mfd/Kconfig       |  4 ++--
 drivers/regulator/Kconfig | 14 +++++++-------
 drivers/rtc/Kconfig       |  7 ++++---
 4 files changed, 15 insertions(+), 14 deletions(-)

-- 
2.7.4

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[rtc-linux] [PATCH 1/4] clk: Enable compile testing for s2mps11 and max77686

[Krzysztof Kozlowski]

s2mps11 and max77686 clock drivers can be compile tested to increase
build coverage.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/clk/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 6a8ac04bedeb..56c1998ced3e 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -33,7 +33,7 @@ source "drivers/clk/versatile/Kconfig"
 
 config COMMON_CLK_MAX77686
 	tristate "Clock driver for Maxim 77620/77686/77802 MFD"
-	depends on MFD_MAX77686 || MFD_MAX77620
+	depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
 	---help---
 	  This driver supports Maxim 77620/77686/77802 crystal oscillator
 	  clock.
@@ -119,7 +119,7 @@ config COMMON_CLK_CS2000_CP
 
 config COMMON_CLK_S2MPS11
 	tristate "Clock driver for S2MPS1X/S5M8767 MFD"
-	depends on MFD_SEC_CORE
+	depends on MFD_SEC_CORE || COMPILE_TEST
 	---help---
 	  This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
 	  clock. These multi-function devices have two (S2MPS14) or three
-- 
2.7.4

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[rtc-linux] Re: [PATCH 1/4] clk: Enable compile testing for s2mps11 and max77686

[Stephen Boyd]

On 10/02, Krzysztof Kozlowski wrote:
> s2mps11 and max77686 clock drivers can be compile tested to increase
> build coverage.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[rtc-linux] [PATCH 2/4] regulator: Enable compile testing for Maxim and Samsung PMIC drivers

[Krzysztof Kozlowski]

Most of Maxim and Samsung PMIC/MUIC regulator drivers can be compile
tested to increase build coverage.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/regulator/Kconfig | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 936f7ccc9736..1ce7e3633b63 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -379,7 +379,7 @@ config REGULATOR_MAX1586
 
 config REGULATOR_MAX77620
 	tristate "Maxim 77620/MAX20024 voltage regulator"
-	depends on MFD_MAX77620
+	depends on MFD_MAX77620 || COMPILE_TEST
 	help
 	  This driver controls Maxim MAX77620 voltage output regulator
 	  via I2C bus. The provided regulator is suitable for Tegra
@@ -453,7 +453,7 @@ config REGULATOR_MAX8998
 
 config REGULATOR_MAX77686
 	tristate "Maxim 77686 regulator"
-	depends on MFD_MAX77686
+	depends on MFD_MAX77686 || COMPILE_TEST
 	help
 	  This driver controls a Maxim 77686 regulator
 	  via I2C bus. The provided regulator is suitable for
@@ -461,7 +461,7 @@ config REGULATOR_MAX77686
 
 config REGULATOR_MAX77693
 	tristate "Maxim 77693/77843 regulator"
-	depends on (MFD_MAX77693 || MFD_MAX77843)
+	depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST
 	help
 	  This driver controls a Maxim 77693/77843 regulators via I2C bus.
 	  The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
@@ -470,7 +470,7 @@ config REGULATOR_MAX77693
 
 config REGULATOR_MAX77802
 	tristate "Maxim 77802 regulator"
-	depends on MFD_MAX77686
+	depends on MFD_MAX77686 || COMPILE_TEST
 	help
 	  This driver controls a Maxim 77802 regulator
 	  via I2C bus. The provided regulator is suitable for
@@ -669,14 +669,14 @@ config REGULATOR_RT5033
 
 config REGULATOR_S2MPA01
 	tristate "Samsung S2MPA01 voltage regulator"
-	depends on MFD_SEC_CORE
+	depends on MFD_SEC_CORE || COMPILE_TEST
 	help
 	 This driver controls Samsung S2MPA01 voltage output regulator
 	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
 
 config REGULATOR_S2MPS11
 	tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
-	depends on MFD_SEC_CORE
+	depends on MFD_SEC_CORE || COMPILE_TEST
 	help
 	 This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
 	 output regulator via I2C bus. The chip is comprised of high efficient
@@ -685,7 +685,7 @@ config REGULATOR_S2MPS11
 
 config REGULATOR_S5M8767
 	tristate "Samsung S5M8767A voltage regulator"
-	depends on MFD_SEC_CORE
+	depends on MFD_SEC_CORE || COMPILE_TEST
 	help
 	 This driver supports a Samsung S5M8767A voltage output regulator
 	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
-- 
2.7.4

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[rtc-linux] Re: [PATCH 2/4] regulator: Enable compile testing for Maxim and Samsung PMIC drivers

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 1027 bytes --]

On Sun, Oct 02, 2016 at 10:58:15PM +0200, Krzysztof Kozlowski wrote:
> Most of Maxim and Samsung PMIC/MUIC regulator drivers can be compile
> tested to increase build coverage.

All these drivers already just depend on the MFDs which don't have any
weird architecture dependencies - the main goal with COMPILE_TEST is
usually to eliminate dependencies which just can't be selected so they
can be built at all.  Given that there's no easy way to select
everything in a subsystem otherwise does this buy us a lot?

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 455 bytes --]

[rtc-linux] Re: [PATCH 2/4] regulator: Enable compile testing for Maxim and Samsung PMIC drivers

[Krzysztof Kozlowski]

On Tue, Oct 04, 2016 at 04:40:55AM +0200, Mark Brown wrote:
> On Sun, Oct 02, 2016 at 10:58:15PM +0200, Krzysztof Kozlowski wrote:
> > Most of Maxim and Samsung PMIC/MUIC regulator drivers can be compile
> > tested to increase build coverage.
> 
> All these drivers already just depend on the MFDs which don't have any
> weird architecture dependencies - the main goal with COMPILE_TEST is
> usually to eliminate dependencies which just can't be selected so they
> can be built at all.  Given that there's no easy way to select
> everything in a subsystem otherwise does this buy us a lot?

Initially I thought similar - if parent MFD driver can be
compile-tested, then these children do not need that flag...

However the MFD drivers depend on I2C which (currently) cannot be
removed for compile testing. On the other hand, regulator drivers do not
need that dependency so you can compile-test them with I2C=n. That is
the main benefit. If you wish, I can add this information to the commit
msg.

Best regards,
Krzysztof

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[rtc-linux] [PATCH 3/4] rtc: Enable compile testing for Maxim and Samsung drivers

[Krzysztof Kozlowski]

max8907, max77686 and s5m RTC drivers can be compile tested to increase
build coverage.  The s5m-rtc uses REGMAP_IRQ so add this as explicit
dependency.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/rtc/Kconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index e859d148aba9..988053664125 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -303,7 +303,7 @@ config RTC_DRV_MAX6900
 
 config RTC_DRV_MAX8907
 	tristate "Maxim MAX8907"
-	depends on MFD_MAX8907
+	depends on MFD_MAX8907 || COMPILE_TEST
 	help
 	  If you say yes here you will get support for the
 	  RTC of Maxim MAX8907 PMIC.
@@ -343,7 +343,7 @@ config RTC_DRV_MAX8997
 
 config RTC_DRV_MAX77686
 	tristate "Maxim MAX77686"
-	depends on MFD_MAX77686 || MFD_MAX77620
+	depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
 	help
 	  If you say yes here you will get support for the
 	  RTC of Maxim MAX77686/MAX77620/MAX77802 PMIC.
@@ -602,7 +602,8 @@ config RTC_DRV_RV8803
 
 config RTC_DRV_S5M
 	tristate "Samsung S2M/S5M series"
-	depends on MFD_SEC_CORE
+	depends on MFD_SEC_CORE || COMPILE_TEST
+	select REGMAP_IRQ
 	help
 	  If you say yes here you will get support for the
 	  RTC of Samsung S2MPS14 and S5M PMIC series.
-- 
2.7.4

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[rtc-linux] Re: [PATCH 3/4] rtc: Enable compile testing for Maxim and Samsung drivers

[Alexandre Belloni]

On 02/10/2016 at 22:58:16 +0200, Krzysztof Kozlowski wrote :
> max8907, max77686 and s5m RTC drivers can be compile tested to increase
> build coverage.  The s5m-rtc uses REGMAP_IRQ so add this as explicit
> dependency.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  drivers/rtc/Kconfig | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
Applied, thanks.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[rtc-linux] [PATCH 4/4] mfd: Enable compile testing for max77620 and max77686

[Krzysztof Kozlowski]

The OF is not a strict build-time dependency so max77620 and max77686
can be compile tested to increase build coverage.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/mfd/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index c6df6442ba2b..ccea26943746 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -563,7 +563,7 @@ config MFD_MAX14577
 config MFD_MAX77620
 	bool "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support"
 	depends on I2C=y
-	depends on OF
+	depends on OF || COMPILE_TEST
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -578,7 +578,7 @@ config MFD_MAX77620
 config MFD_MAX77686
 	tristate "Maxim Semiconductor MAX77686/802 PMIC Support"
 	depends on I2C
-	depends on OF
+	depends on OF || COMPILE_TEST
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-- 
2.7.4

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[rtc-linux] Re: [PATCH 4/4] mfd: Enable compile testing for max77620 and max77686

[Lee Jones]

On Sun, 02 Oct 2016, Krzysztof Kozlowski wrote:

> The OF is not a strict build-time dependency so max77620 and max77686
> can be compile tested to increase build coverage.
>=20
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  drivers/mfd/Kconfig | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index c6df6442ba2b..ccea26943746 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -563,7 +563,7 @@ config MFD_MAX14577
>  config MFD_MAX77620
>  	bool "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support"
>  	depends on I2C=3Dy
> -	depends on OF
> +	depends on OF || COMPILE_TEST
>  	select MFD_CORE
>  	select REGMAP_I2C
>  	select REGMAP_IRQ
> @@ -578,7 +578,7 @@ config MFD_MAX77620
>  config MFD_MAX77686
>  	tristate "Maxim Semiconductor MAX77686/802 PMIC Support"
>  	depends on I2C
> -	depends on OF
> +	depends on OF || COMPILE_TEST
>  	select MFD_CORE
>  	select REGMAP_I2C
>  	select REGMAP_IRQ

--=20
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org =E2=94=82 Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

--=20
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---=20
You received this message because you are subscribed to the Google Groups "=
rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.