Re: [PATCH v3 08/12] rtc: rzn1: Dynamically calculate synchronization delay based on clock rate

[sashiko-bot@kernel.org]

> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Replace the hardcoded hardware synchronization delays with a calculated
> time window derived from the operating sub-clock frequency.
> 
> The driver currently hardcodes microsecond ranges assuming a fixed
> sub-clock frequency of 32.768 kHz. Newer SoC variants, such as the
> RZ/T2H, drive this hardware block using a much faster clock rate
> (~195.3 kHz). Hardcoding these wait windows forces faster blocks to
> over-sleep, introducing unnecessary delays during clock initialization
> and register configuration.
> 
> Calculate the duration of the required clock cycles in microseconds based
> on the runtime clock rate, and store this value in the driver private
> structure to adjust the usleep_range() and readl_poll_timeout() boundaries
> dynamically.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260706175138.12587-1-prabhakar.mahadev-lad.rj@bp.renesas.com?part=8