[PATCH v4 0/9] rtc: abx80x: add support for abx81x

[PATCH v4 0/9] rtc: abx80x: add support for abx81x

[Antoni Pokusinski]

Hello,
This patch series adds support for the ABX81X RTCs, which are essentially
SPI versions of the ABX80X RTCs. The first patches (P2-P4) contain bug fixes 
(added after sashiko's review in v1-v3), then (P5-P8) we have some cleanup and
reorganization changes (converting the driver to use the regmap API was
needed for this), followed by the actual ABX81X support.

Kind regards,
Antoni Pokusinski


---
Changes since v3:
* PATCH 2 ("rtc: abx80x: fix error check after i2c_smbus_read in read_alarm()")
  New patch
* PATCH 3 ("rtc: abx80x: add mutex protection for register writes")
  Replaced "guard()" with "scoped_guard()" in "abx80x_ioctl()"
* PATCH 4 ("rtc: abx80x: properly handle shared IRQs")
  Disable all the unused interrupts in "probe()"
* PATCH 6 ("rtc: abx80x: use regmap instead of I2C specific API")
  Changed the type of "flag" arguments in "regmap_read()" from "int" to "unsigned int"
---
Changes since v2:
* dropped patch "rtc: abx80x: move part autodetection before RV1805 configuration"
* PATCH 2 ("rtc: abx80x: add mutex protection for register writes")
  New patch
* PATCH 5 ("rtc: abx80x: use regmap instead of I2C specific API")
  - return PTR_ERR(regmap) on I2C regmap init error
* PATCH 8 ("rtc: abx80x: add support for ABX81X")
  - return PTR_ERR(regmap) on SPI regmap init error
---
Changes since v1:
* PATCH 1 ("dt-bindings: rtc: abx80x: document ABX81X RTCs")
  - added missing "spi-peripherals-props" reference
  - added abx815 compatible strings to the trickle charger enum list
* PATCH 2 ("rtc: abx80x: move part autodetection before RV1805 configuration")
  New patch
* PATCH 3 ("rtc: abx80x: properly handle shared IRQs")
  New patch
* PATCH 5 ("rtc: abx80x: use regmap instead of I2C specific API")
  - changed regmap_read() argument types from `int` to `unsigned int`
---

Antoni Pokusinski (9):
  dt-bindings: rtc: abx80x: document ABX81X RTCs
  rtc: abx80x: fix error check after i2c_smbus_read in read_alarm()
  rtc: abx80x: add mutex protection for register writes
  rtc: abx80x: properly handle shared IRQs
  rtc: abx80x: add irq to struct abx80x_priv
  rtc: abx80x: use regmap instead of I2C specific API
  rtc: abx80x: replace read-modify-write pattern with regmap helpers
  rtc: abx80x: create abx80x_i2c_probe()
  rtc: abx80x: add support for ABX81X

 .../bindings/rtc/abracon,abx80x.yaml          |  18 +-
 drivers/rtc/Kconfig                           |  25 +-
 drivers/rtc/rtc-abx80x.c                      | 663 +++++++++++-------
 3 files changed, 451 insertions(+), 255 deletions(-)

-- 
2.55.0

[PATCH v4 1/9] dt-bindings: rtc: abx80x: document ABX81X RTCs

[Antoni Pokusinski]

Abracon AB0815 and AB1815 are RTC modules with SPI interface.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 .../bindings/rtc/abracon,abx80x.yaml           | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
index 355b0598411a..d105570bcd5a 100644
--- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
+++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Abracon ABX80X I2C ultra low power RTC/Alarm chip
+title: Abracon ABX80X (I2C) and ABX81X (SPI) ultra low power RTC/Alarm chips
 
 maintainers:
   - linux-rtc@vger.kernel.org
@@ -21,10 +21,12 @@ properties:
       - abracon,ab0803
       - abracon,ab0804
       - abracon,ab0805
+      - abracon,ab0815
       - abracon,ab1801
       - abracon,ab1803
       - abracon,ab1804
       - abracon,ab1805
+      - abracon,ab1815
       - microcrystal,rv1805
 
   reg:
@@ -61,6 +63,7 @@ required:
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - $ref: rtc.yaml#
   - if:
       properties:
@@ -73,6 +76,8 @@ allOf:
                 - abracon,ab1804
                 - abracon,ab0805
                 - abracon,ab1805
+                - abracon,ab0815
+                - abracon,ab1815
     then:
       properties:
         abracon,tc-diode: false
@@ -96,3 +101,14 @@ examples:
             interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
         };
     };
+
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@0 {
+            compatible = "abracon,ab1815";
+            reg = <0>;
+        };
+    };
-- 
2.55.0

[PATCH v4 2/9] rtc: abx80x: fix error check after i2c_smbus_read in read_alarm()

[Antoni Pokusinski]

i2c_smbus_read_i2c_block_data() returns the number of bytes read on
success and a negative error code on failure. The existing code treated
any non-zero return value as an error.

Fix the error handling by checking only for negative return values.

Fixes: 718a820a303c ("rtc: abx80x: add alarm support")
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 drivers/rtc/rtc-abx80x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 5486d9d0b1e5..fdf9664ebb6f 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -294,7 +294,7 @@ static int abx80x_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 
 	err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ASC,
 					    sizeof(buf), buf);
-	if (err)
+	if (err < 0)
 		return err;
 
 	irq_mask = i2c_smbus_read_byte_data(client, ABX8XX_REG_IRQ);
-- 
2.55.0

[PATCH v4 3/9] rtc: abx80x: add mutex protection for register writes

[Antoni Pokusinski]

The ABX80X RTC driver performs multi-step register operations such as
NVMEM transfers or register writes preceded by a configuration key
write. Add a mutex to serialize all the register writes to protect
these sequences against race conditions.

Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 drivers/rtc/rtc-abx80x.c | 45 +++++++++++++++++++++++++++++++++-------
 1 file changed, 37 insertions(+), 8 deletions(-)

diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index fdf9664ebb6f..0c8d3416fd5a 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -15,6 +15,7 @@
 #include <linux/i2c.h>
 #include <linux/kstrtox.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/rtc.h>
 #include <linux/watchdog.h>
@@ -127,6 +128,7 @@ struct abx80x_priv {
 	struct rtc_device *rtc;
 	struct i2c_client *client;
 	struct watchdog_device wdog;
+	struct mutex lock;
 };
 
 static int abx80x_write_config_key(struct i2c_client *client, u8 key)
@@ -219,6 +221,7 @@ static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
 static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	unsigned char buf[8];
 	int err, flags;
 
@@ -234,6 +237,8 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	buf[ABX8XX_REG_YR] = bin2bcd(tm->tm_year - 100);
 	buf[ABX8XX_REG_WD] = tm->tm_wday;
 
+	guard(mutex)(&priv->lock);
+
 	err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_HTH,
 					     sizeof(buf), buf);
 	if (err < 0) {
@@ -263,6 +268,8 @@ static irqreturn_t abx80x_handle_irq(int irq, void *dev_id)
 	struct rtc_device *rtc = priv->rtc;
 	int status;
 
+	guard(mutex)(&priv->lock);
+
 	status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS);
 	if (status < 0)
 		return IRQ_NONE;
@@ -317,6 +324,7 @@ static int abx80x_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	u8 alarm[6];
 	int err;
 
@@ -330,6 +338,8 @@ static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 	alarm[4] = bin2bcd(t->time.tm_mday);
 	alarm[5] = bin2bcd(t->time.tm_mon + 1);
 
+	guard(mutex)(&priv->lock);
+
 	err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_AHTH,
 					     sizeof(alarm), alarm);
 	if (err < 0) {
@@ -352,6 +362,7 @@ static int abx80x_rtc_set_autocalibration(struct device *dev,
 					  int autocalibration)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	int retval, flags = 0;
 
 	if ((autocalibration != 0) && (autocalibration != 1024) &&
@@ -360,6 +371,8 @@ static int abx80x_rtc_set_autocalibration(struct device *dev,
 		return -EINVAL;
 	}
 
+	guard(mutex)(&priv->lock);
+
 	flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
 	if (flags < 0)
 		return flags;
@@ -443,6 +456,7 @@ static ssize_t oscillator_store(struct device *dev,
 				const char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	int retval, flags, rc_mode = 0;
 
 	if (strncmp(buf, "rc", 2) == 0) {
@@ -454,6 +468,8 @@ static ssize_t oscillator_store(struct device *dev,
 		return -EINVAL;
 	}
 
+	guard(mutex)(&priv->lock);
+
 	flags =  i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
 	if (flags < 0)
 		return flags;
@@ -511,8 +527,11 @@ static const struct attribute_group rtc_calib_attr_group = {
 static int abx80x_alarm_irq_enable(struct device *dev, unsigned int enabled)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	int err;
 
+	guard(mutex)(&priv->lock);
+
 	if (enabled)
 		err = i2c_smbus_write_byte_data(client, ABX8XX_REG_IRQ,
 						(ABX8XX_IRQ_IM_1_4 |
@@ -526,6 +545,7 @@ static int abx80x_alarm_irq_enable(struct device *dev, unsigned int enabled)
 static int abx80x_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	int status, tmp;
 
 	switch (cmd) {
@@ -539,16 +559,18 @@ static int abx80x_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 		return put_user(tmp, (unsigned int __user *)arg);
 
 	case RTC_VL_CLR:
-		status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS);
-		if (status < 0)
-			return status;
+		scoped_guard(mutex, &priv->lock) {
+			status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS);
+			if (status < 0)
+				return status;
 
-		status &= ~ABX8XX_STATUS_BLF;
+			status &= ~ABX8XX_STATUS_BLF;
 
-		tmp = i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS,
-						status);
-		if (tmp < 0)
-			return tmp;
+			tmp = i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS,
+							status);
+			if (tmp < 0)
+				return tmp;
+		}
 
 		return 0;
 
@@ -617,6 +639,8 @@ static int __abx80x_wdog_set_timeout(struct watchdog_device *wdog,
 	struct abx80x_priv *priv = watchdog_get_drvdata(wdog);
 	u8 val = ABX8XX_WDT_WDS | timeout_bits(timeout);
 
+	guard(mutex)(&priv->lock);
+
 	/*
 	 * Writing any timeout to the WDT register resets the watchdog timer.
 	 * Writing 0 disables it.
@@ -701,6 +725,8 @@ static int abx80x_nvmem_xfer(struct abx80x_priv *priv, unsigned int offset,
 		len = min(lower + bytes, (size_t)ABX8XX_SRAM_WIN_SIZE) - lower;
 		len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
 
+		guard(mutex)(&priv->lock);
+
 		ret = i2c_smbus_write_byte_data(priv->client, ABX8XX_REG_EXTRAM,
 						extram);
 		if (ret)
@@ -908,6 +934,9 @@ static int abx80x_probe(struct i2c_client *client)
 
 	priv->rtc->ops = &abx80x_rtc_ops;
 	priv->client = client;
+	err = devm_mutex_init(&client->dev, &priv->lock);
+	if (err)
+		return err;
 
 	i2c_set_clientdata(client, priv);
 
-- 
2.55.0

[PATCH v4 4/9] rtc: abx80x: properly handle shared IRQs

[Antoni Pokusinski]

The abx80x RTC driver registers its interrupt handler with IRQF_SHARED,
but the handler always returned IRQ_HANDLED and cleared the status
register even when no interrupt source from the RTC was active.

This could cause the driver to claim interrupts belonging to other
devices sharing the same IRQ line and could also clear unrelated status
bits in the RTC status register.

Only handle the interrupt when the alarm or watchdog flags are set, and
clear only those interrupt status bits that were handled. Return
IRQ_NONE when the interrupt was not generated by the RTC.

Fixes: 718a820a303c ("rtc: abx80x: add alarm support")
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 drivers/rtc/rtc-abx80x.c | 54 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 49 insertions(+), 5 deletions(-)

diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 0c8d3416fd5a..485d1ea08030 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -51,12 +51,18 @@
 #define ABX8XX_CTRL2_RSVD	BIT(5)
 
 #define ABX8XX_REG_IRQ		0x12
+#define ABX8XX_IRQ_EX1E		BIT(0)
+#define ABX8XX_IRQ_EX2E		BIT(1)
 #define ABX8XX_IRQ_AIE		BIT(2)
+#define ABX8XX_IRQ_TIE		BIT(3)
+#define ABX8XX_IRQ_BLIE		BIT(4)
 #define ABX8XX_IRQ_IM_1_4	(0x3 << 5)
 
 #define ABX8XX_REG_CD_TIMER_CTL	0x18
 
 #define ABX8XX_REG_OSC		0x1c
+#define ABX8XX_OSC_ACIE		BIT(0)
+#define ABX8XX_OSC_OFIE		BIT(1)
 #define ABX8XX_OSC_FOS		BIT(3)
 #define ABX8XX_OSC_BOS		BIT(4)
 #define ABX8XX_OSC_ACAL_512	BIT(5)
@@ -266,27 +272,34 @@ static irqreturn_t abx80x_handle_irq(int irq, void *dev_id)
 	struct i2c_client *client = dev_id;
 	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	struct rtc_device *rtc = priv->rtc;
+	irqreturn_t handled = IRQ_NONE;
 	int status;
 
 	guard(mutex)(&priv->lock);
 
 	status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS);
 	if (status < 0)
-		return IRQ_NONE;
+		return handled;
 
-	if (status & ABX8XX_STATUS_AF)
+	if (status & ABX8XX_STATUS_AF) {
 		rtc_update_irq(rtc, 1, RTC_AF | RTC_IRQF);
+		handled = IRQ_HANDLED;
+	}
 
 	/*
 	 * It is unclear if we'll get an interrupt before the external
 	 * reset kicks in.
 	 */
-	if (status & ABX8XX_STATUS_WDT)
+	if (status & ABX8XX_STATUS_WDT) {
 		dev_alert(&client->dev, "watchdog timeout interrupt.\n");
+		handled = IRQ_HANDLED;
+	}
 
-	i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS, 0);
+	if (handled == IRQ_HANDLED)
+		i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS,
+					  status & ~(ABX8XX_STATUS_AF | ABX8XX_STATUS_WDT));
 
-	return IRQ_HANDLED;
+	return handled;
 }
 
 static int abx80x_read_alarm(struct device *dev, struct rtc_wkalrm *t)
@@ -950,6 +963,37 @@ static int abx80x_probe(struct i2c_client *client)
 	if (err)
 		return err;
 
+	/* Disable unused interrupts */
+	data = i2c_smbus_read_byte_data(client, ABX8XX_REG_IRQ);
+	if (data < 0) {
+		dev_err(&client->dev, "Unable to read irq register\n");
+		return -EIO;
+	}
+
+	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_IRQ,
+					data & ~(ABX8XX_IRQ_EX1E |
+						 ABX8XX_IRQ_EX2E |
+						 ABX8XX_IRQ_TIE |
+						 ABX8XX_IRQ_BLIE));
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write irq register\n");
+		return -EIO;
+	}
+
+	data = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
+	if (data < 0) {
+		dev_err(&client->dev, "Unable to read Oscillator Control register\n");
+		return -EIO;
+	}
+
+	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC,
+					data & ~(ABX8XX_OSC_ACIE |
+						 ABX8XX_OSC_OFIE));
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write Oscillator Control register\n");
+		return -EIO;
+	}
+
 	if (client->irq > 0) {
 		dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
 		err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
-- 
2.55.0

[PATCH v4 5/9] rtc: abx80x: add irq to struct abx80x_priv

[Antoni Pokusinski]

This way the irq number is not tied to the i2c_client and can be
easily accessed also in the case of ABX81X SPI clocks.

Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 drivers/rtc/rtc-abx80x.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 485d1ea08030..12a4dbfec639 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -135,6 +135,7 @@ struct abx80x_priv {
 	struct i2c_client *client;
 	struct watchdog_device wdog;
 	struct mutex lock;
+	int irq;
 };
 
 static int abx80x_write_config_key(struct i2c_client *client, u8 key)
@@ -305,11 +306,12 @@ static irqreturn_t abx80x_handle_irq(int irq, void *dev_id)
 static int abx80x_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	unsigned char buf[7];
 
 	int irq_mask, err;
 
-	if (client->irq <= 0)
+	if (priv->irq <= 0)
 		return -EINVAL;
 
 	err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ASC,
@@ -341,7 +343,7 @@ static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 	u8 alarm[6];
 	int err;
 
-	if (client->irq <= 0)
+	if (priv->irq <= 0)
 		return -EINVAL;
 
 	alarm[0] = 0x0;
@@ -947,6 +949,7 @@ static int abx80x_probe(struct i2c_client *client)
 
 	priv->rtc->ops = &abx80x_rtc_ops;
 	priv->client = client;
+	priv->irq = client->irq;
 	err = devm_mutex_init(&client->dev, &priv->lock);
 	if (err)
 		return err;
@@ -994,19 +997,19 @@ static int abx80x_probe(struct i2c_client *client)
 		return -EIO;
 	}
 
-	if (client->irq > 0) {
-		dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
-		err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+	if (priv->irq > 0) {
+		dev_info(&client->dev, "IRQ %d supplied\n", priv->irq);
+		err = devm_request_threaded_irq(&client->dev, priv->irq, NULL,
 						abx80x_handle_irq,
 						IRQF_SHARED | IRQF_ONESHOT,
 						"abx8xx",
 						client);
 		if (err) {
 			dev_err(&client->dev, "unable to request IRQ, alarms disabled\n");
-			client->irq = 0;
+			priv->irq = 0;
 		}
 	}
-	if (client->irq <= 0)
+	if (priv->irq <= 0)
 		clear_bit(RTC_FEATURE_ALARM, priv->rtc->features);
 
 	err = rtc_add_group(priv->rtc, &rtc_calib_attr_group);
-- 
2.55.0

[PATCH v4 6/9] rtc: abx80x: use regmap instead of I2C specific API

[Antoni Pokusinski]

Rework the driver so that it uses regmap_* functions for communication
with the device instead of the i2c_smbus_* API. This way the support for
ABX81X RTCs which use SPI can be added later.

Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 drivers/rtc/Kconfig      |   1 +
 drivers/rtc/rtc-abx80x.c | 389 +++++++++++++++++++++------------------
 2 files changed, 211 insertions(+), 179 deletions(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 01def8231873..4d14bcba616e 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -215,6 +215,7 @@ config RTC_DRV_ABEOZ9
 config RTC_DRV_ABX80X
 	tristate "Abracon ABx80x"
 	select WATCHDOG_CORE if WATCHDOG
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for Abracon AB080X and AB180X
 	  families of ultra-low-power  battery- and capacitor-backed real-time
diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 12a4dbfec639..5d41882f3c70 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
+#include <linux/regmap.h>
 #include <linux/rtc.h>
 #include <linux/watchdog.h>
 
@@ -132,53 +133,55 @@ static struct abx80x_cap abx80x_caps[] = {
 
 struct abx80x_priv {
 	struct rtc_device *rtc;
-	struct i2c_client *client;
+	struct regmap *regmap;
 	struct watchdog_device wdog;
 	struct mutex lock;
 	int irq;
 };
 
-static int abx80x_write_config_key(struct i2c_client *client, u8 key)
+static int abx80x_write_config_key(struct device *dev, u8 key)
 {
-	if (i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY, key) < 0) {
-		dev_err(&client->dev, "Unable to write configuration key\n");
+	struct abx80x_priv *priv = dev_get_drvdata(dev);
+
+	if (regmap_write(priv->regmap, ABX8XX_REG_CFG_KEY, key) < 0) {
+		dev_err(dev, "Unable to write configuration key\n");
 		return -EIO;
 	}
 
 	return 0;
 }
 
-static int abx80x_is_rc_mode(struct i2c_client *client)
+static int abx80x_is_rc_mode(struct device *dev)
 {
-	int flags = 0;
+	struct abx80x_priv *priv = dev_get_drvdata(dev);
+	unsigned int flags = 0;
+	int err;
 
-	flags =  i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
-	if (flags < 0) {
-		dev_err(&client->dev,
-			"Failed to read autocalibration attribute\n");
-		return flags;
+	err = regmap_read(priv->regmap, ABX8XX_REG_OSS, &flags);
+	if (err < 0) {
+		dev_err(dev, "Failed to read autocalibration attribute\n");
+		return err;
 	}
 
 	return (flags & ABX8XX_OSS_OMODE) ? 1 : 0;
 }
 
-static int abx80x_enable_trickle_charger(struct i2c_client *client,
-					 u8 trickle_cfg)
+static int abx80x_enable_trickle_charger(struct device *dev, u8 trickle_cfg)
 {
+	struct abx80x_priv *priv = dev_get_drvdata(dev);
 	int err;
 
 	/*
 	 * Write the configuration key register to enable access to the Trickle
 	 * register
 	 */
-	if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_MISC) < 0)
+	if (abx80x_write_config_key(dev, ABX8XX_CFG_KEY_MISC) < 0)
 		return -EIO;
 
-	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_TRICKLE,
-					ABX8XX_TRICKLE_CHARGE_ENABLE |
-					trickle_cfg);
+	err = regmap_write(priv->regmap, ABX8XX_REG_TRICKLE,
+			   ABX8XX_TRICKLE_CHARGE_ENABLE | trickle_cfg);
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to write trickle register\n");
+		dev_err(dev, "Unable to write trickle register\n");
 		return -EIO;
 	}
 
@@ -187,19 +190,20 @@ static int abx80x_enable_trickle_charger(struct i2c_client *client,
 
 static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	struct i2c_client *client = to_i2c_client(dev);
+	struct abx80x_priv *priv = dev_get_drvdata(dev);
 	unsigned char buf[8];
-	int err, flags, rc_mode = 0;
+	unsigned int flags;
+	int err, rc_mode = 0;
 
 	/* Read the Oscillator Failure only in XT mode */
-	rc_mode = abx80x_is_rc_mode(client);
+	rc_mode = abx80x_is_rc_mode(dev);
 	if (rc_mode < 0)
 		return rc_mode;
 
 	if (!rc_mode) {
-		flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
-		if (flags < 0)
-			return flags;
+		err = regmap_read(priv->regmap, ABX8XX_REG_OSS, &flags);
+		if (err < 0)
+			return err;
 
 		if (flags & ABX8XX_OSS_OF) {
 			dev_err(dev, "Oscillator failure, data is invalid.\n");
@@ -207,10 +211,9 @@ static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
 		}
 	}
 
-	err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_HTH,
-					    sizeof(buf), buf);
+	err = regmap_bulk_read(priv->regmap, ABX8XX_REG_HTH, buf, sizeof(buf));
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to read date\n");
+		dev_err(dev, "Unable to read date\n");
 		return -EIO;
 	}
 
@@ -227,8 +230,7 @@ static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct abx80x_priv *priv = i2c_get_clientdata(client);
+	struct abx80x_priv *priv = dev_get_drvdata(dev);
 	unsigned char buf[8];
 	int err, flags;
 
@@ -246,22 +248,22 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 	guard(mutex)(&priv->lock);
 
-	err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_HTH,
-					     sizeof(buf), buf);
+	err = regmap_bulk_write(priv->regmap, ABX8XX_REG_HTH, buf,
+				sizeof(buf));
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to write to date registers\n");
+		dev_err(dev, "Unable to write to date registers\n");
 		return -EIO;
 	}
 
 	/* Clear the OF bit of Oscillator Status Register */
-	flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
-	if (flags < 0)
-		return flags;
+	err = regmap_read(priv->regmap, ABX8XX_REG_OSS, &flags);
+	if (err < 0)
+		return err;
 
-	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSS,
-					flags & ~ABX8XX_OSS_OF);
+	err = regmap_write(priv->regmap, ABX8XX_REG_OSS,
+			   flags & ~ABX8XX_OSS_OF);
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to write oscillator status register\n");
+		dev_err(dev, "Unable to write oscillator status register\n");
 		return err;
 	}
 
@@ -270,16 +272,17 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 static irqreturn_t abx80x_handle_irq(int irq, void *dev_id)
 {
-	struct i2c_client *client = dev_id;
-	struct abx80x_priv *priv = i2c_get_clientdata(client);
+	struct device *dev = dev_id;
+	struct abx80x_priv *priv = dev_get_drvdata(dev);
 	struct rtc_device *rtc = priv->rtc;
 	irqreturn_t handled = IRQ_NONE;
-	int status;
+	unsigned int status;
+	int err;
 
 	guard(mutex)(&priv->lock);
 
-	status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS);
-	if (status < 0)
+	err = regmap_read(priv->regmap, ABX8XX_REG_STATUS, &status);
+	if (err < 0)
 		return handled;
 
 	if (status & ABX8XX_STATUS_AF) {
@@ -292,36 +295,35 @@ static irqreturn_t abx80x_handle_irq(int irq, void *dev_id)
 	 * reset kicks in.
 	 */
 	if (status & ABX8XX_STATUS_WDT) {
-		dev_alert(&client->dev, "watchdog timeout interrupt.\n");
+		dev_alert(dev, "watchdog timeout interrupt.\n");
 		handled = IRQ_HANDLED;
 	}
 
 	if (handled == IRQ_HANDLED)
-		i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS,
-					  status & ~(ABX8XX_STATUS_AF | ABX8XX_STATUS_WDT));
+		regmap_write(priv->regmap, ABX8XX_REG_STATUS,
+			     status & ~(ABX8XX_STATUS_AF | ABX8XX_STATUS_WDT));
 
 	return handled;
 }
 
 static int abx80x_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct abx80x_priv *priv = i2c_get_clientdata(client);
+	struct abx80x_priv *priv = dev_get_drvdata(dev);
 	unsigned char buf[7];
 
-	int irq_mask, err;
+	unsigned int irq_mask;
+	int err;
 
 	if (priv->irq <= 0)
 		return -EINVAL;
 
-	err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ASC,
-					    sizeof(buf), buf);
-	if (err < 0)
+	err = regmap_bulk_read(priv->regmap, ABX8XX_REG_ASC, buf, sizeof(buf));
+	if (err)
 		return err;
 
-	irq_mask = i2c_smbus_read_byte_data(client, ABX8XX_REG_IRQ);
-	if (irq_mask < 0)
-		return irq_mask;
+	err = regmap_read(priv->regmap, ABX8XX_REG_IRQ, &irq_mask);
+	if (err < 0)
+		return err;
 
 	t->time.tm_sec = bcd2bin(buf[0] & 0x7F);
 	t->time.tm_min = bcd2bin(buf[1] & 0x7F);
@@ -338,8 +340,7 @@ static int abx80x_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 
 static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct abx80x_priv *priv = i2c_get_clientdata(client);
+	struct abx80x_priv *priv = dev_get_drvdata(dev);
 	u8 alarm[6];
 	int err;
 
@@ -355,17 +356,16 @@ static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 
 	guard(mutex)(&priv->lock);
 
-	err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_AHTH,
-					     sizeof(alarm), alarm);
+	err = regmap_bulk_write(priv->regmap, ABX8XX_REG_AHTH,
+				alarm, sizeof(alarm));
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to write alarm registers\n");
+		dev_err(dev, "Unable to write alarm registers\n");
 		return -EIO;
 	}
 
 	if (t->enabled) {
-		err = i2c_smbus_write_byte_data(client, ABX8XX_REG_IRQ,
-						(ABX8XX_IRQ_IM_1_4 |
-						 ABX8XX_IRQ_AIE));
+		err = regmap_write(priv->regmap, ABX8XX_REG_IRQ,
+				   ABX8XX_IRQ_IM_1_4 | ABX8XX_IRQ_AIE);
 		if (err)
 			return err;
 	}
@@ -376,9 +376,9 @@ static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 static int abx80x_rtc_set_autocalibration(struct device *dev,
 					  int autocalibration)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct abx80x_priv *priv = i2c_get_clientdata(client);
-	int retval, flags = 0;
+	struct abx80x_priv *priv = dev_get_drvdata(dev);
+	unsigned int flags = 0;
+	int retval;
 
 	if ((autocalibration != 0) && (autocalibration != 1024) &&
 	    (autocalibration != 512)) {
@@ -388,9 +388,9 @@ static int abx80x_rtc_set_autocalibration(struct device *dev,
 
 	guard(mutex)(&priv->lock);
 
-	flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
-	if (flags < 0)
-		return flags;
+	retval = regmap_read(priv->regmap, ABX8XX_REG_OSC, &flags);
+	if (retval < 0)
+		return retval;
 
 	if (autocalibration == 0) {
 		flags &= ~(ABX8XX_OSC_ACAL_512 | ABX8XX_OSC_ACAL_1024);
@@ -404,22 +404,23 @@ static int abx80x_rtc_set_autocalibration(struct device *dev,
 	}
 
 	/* Unlock write access to Oscillator Control Register */
-	if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_OSC) < 0)
+	if (abx80x_write_config_key(dev, ABX8XX_CFG_KEY_OSC) < 0)
 		return -EIO;
 
-	retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
+	retval = regmap_write(priv->regmap, ABX8XX_REG_OSC, flags);
 
 	return retval;
 }
 
 static int abx80x_rtc_get_autocalibration(struct device *dev)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	int flags = 0, autocalibration;
+	struct abx80x_priv *priv = dev_get_drvdata(dev);
+	unsigned int flags = 0;
+	int autocalibration, err;
 
-	flags =  i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
-	if (flags < 0)
-		return flags;
+	err = regmap_read(priv->regmap, ABX8XX_REG_OSC, &flags);
+	if (err < 0)
+		return err;
 
 	if (flags & ABX8XX_OSC_ACAL_512)
 		autocalibration = 512;
@@ -470,9 +471,9 @@ static ssize_t oscillator_store(struct device *dev,
 				struct device_attribute *attr,
 				const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev->parent);
-	struct abx80x_priv *priv = i2c_get_clientdata(client);
-	int retval, flags, rc_mode = 0;
+	struct abx80x_priv *priv = dev_get_drvdata(dev->parent);
+	int retval, rc_mode = 0;
+	unsigned int flags;
 
 	if (strncmp(buf, "rc", 2) == 0) {
 		rc_mode = 1;
@@ -485,9 +486,9 @@ static ssize_t oscillator_store(struct device *dev,
 
 	guard(mutex)(&priv->lock);
 
-	flags =  i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
-	if (flags < 0)
-		return flags;
+	retval = regmap_read(priv->regmap, ABX8XX_REG_OSC, &flags);
+	if (retval < 0)
+		return retval;
 
 	if (rc_mode == 0)
 		flags &= ~(ABX8XX_OSC_OSEL);
@@ -495,10 +496,10 @@ static ssize_t oscillator_store(struct device *dev,
 		flags |= (ABX8XX_OSC_OSEL);
 
 	/* Unlock write access on Oscillator Control register */
-	if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_OSC) < 0)
+	if (abx80x_write_config_key(dev->parent, ABX8XX_CFG_KEY_OSC) < 0)
 		return -EIO;
 
-	retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
+	retval = regmap_write(priv->regmap, ABX8XX_REG_OSC, flags);
 	if (retval < 0) {
 		dev_err(dev, "Failed to write Oscillator Control register\n");
 		return retval;
@@ -511,9 +512,8 @@ static ssize_t oscillator_show(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
 	int rc_mode = 0;
-	struct i2c_client *client = to_i2c_client(dev->parent);
 
-	rc_mode = abx80x_is_rc_mode(client);
+	rc_mode = abx80x_is_rc_mode(dev->parent);
 
 	if (rc_mode < 0) {
 		dev_err(dev, "Failed to read RTC oscillator selection\n");
@@ -541,33 +541,31 @@ static const struct attribute_group rtc_calib_attr_group = {
 
 static int abx80x_alarm_irq_enable(struct device *dev, unsigned int enabled)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct abx80x_priv *priv = i2c_get_clientdata(client);
+	struct abx80x_priv *priv = dev_get_drvdata(dev);
 	int err;
 
 	guard(mutex)(&priv->lock);
 
 	if (enabled)
-		err = i2c_smbus_write_byte_data(client, ABX8XX_REG_IRQ,
-						(ABX8XX_IRQ_IM_1_4 |
-						 ABX8XX_IRQ_AIE));
+		err = regmap_write(priv->regmap, ABX8XX_REG_IRQ,
+				   ABX8XX_IRQ_IM_1_4 | ABX8XX_IRQ_AIE);
 	else
-		err = i2c_smbus_write_byte_data(client, ABX8XX_REG_IRQ,
-						ABX8XX_IRQ_IM_1_4);
+		err = regmap_write(priv->regmap, ABX8XX_REG_IRQ,
+				   ABX8XX_IRQ_IM_1_4);
 	return err;
 }
 
 static int abx80x_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct abx80x_priv *priv = i2c_get_clientdata(client);
-	int status, tmp;
+	struct abx80x_priv *priv = dev_get_drvdata(dev);
+	unsigned int status;
+	int err, tmp;
 
 	switch (cmd) {
 	case RTC_VL_READ:
-		status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS);
-		if (status < 0)
-			return status;
+		err = regmap_read(priv->regmap, ABX8XX_REG_STATUS, &status);
+		if (err < 0)
+			return err;
 
 		tmp = status & ABX8XX_STATUS_BLF ? RTC_VL_BACKUP_LOW : 0;
 
@@ -575,16 +573,15 @@ static int abx80x_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 
 	case RTC_VL_CLR:
 		scoped_guard(mutex, &priv->lock) {
-			status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS);
-			if (status < 0)
-				return status;
+			err = regmap_read(priv->regmap, ABX8XX_REG_STATUS, &status);
+			if (err < 0)
+				return err;
 
 			status &= ~ABX8XX_STATUS_BLF;
 
-			tmp = i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS,
-							status);
-			if (tmp < 0)
-				return tmp;
+			err = regmap_write(priv->regmap, ABX8XX_REG_STATUS, status);
+			if (err < 0)
+				return err;
 		}
 
 		return 0;
@@ -603,9 +600,9 @@ static const struct rtc_class_ops abx80x_rtc_ops = {
 	.ioctl		= abx80x_ioctl,
 };
 
-static int abx80x_dt_trickle_cfg(struct i2c_client *client)
+static int abx80x_dt_trickle_cfg(struct device *dev)
 {
-	struct device_node *np = client->dev.of_node;
+	struct device_node *np = dev->of_node;
 	const char *diode;
 	int trickle_cfg = 0;
 	int i, ret;
@@ -620,7 +617,7 @@ static int abx80x_dt_trickle_cfg(struct i2c_client *client)
 	} else if (!strcmp(diode, "schottky")) {
 		trickle_cfg |= ABX8XX_TRICKLE_SCHOTTKY_DIODE;
 	} else {
-		dev_dbg(&client->dev, "Invalid tc-diode value: %s\n", diode);
+		dev_dbg(dev, "Invalid tc-diode value: %s\n", diode);
 		return -EINVAL;
 	}
 
@@ -633,7 +630,7 @@ static int abx80x_dt_trickle_cfg(struct i2c_client *client)
 			break;
 
 	if (i == sizeof(trickle_resistors)) {
-		dev_dbg(&client->dev, "Invalid tc-resistor value: %u\n", tmp);
+		dev_dbg(dev, "Invalid tc-resistor value: %u\n", tmp);
 		return -EINVAL;
 	}
 
@@ -660,7 +657,7 @@ static int __abx80x_wdog_set_timeout(struct watchdog_device *wdog,
 	 * Writing any timeout to the WDT register resets the watchdog timer.
 	 * Writing 0 disables it.
 	 */
-	return i2c_smbus_write_byte_data(priv->client, ABX8XX_REG_WDT, val);
+	return regmap_write(priv->regmap, ABX8XX_REG_WDT, val);
 }
 
 static int abx80x_wdog_set_timeout(struct watchdog_device *wdog,
@@ -705,9 +702,11 @@ static const struct watchdog_ops abx80x_wdog_ops = {
 	.set_timeout = abx80x_wdog_set_timeout,
 };
 
-static int abx80x_setup_watchdog(struct abx80x_priv *priv)
+static int abx80x_setup_watchdog(struct device *dev)
 {
-	priv->wdog.parent = &priv->client->dev;
+	struct abx80x_priv *priv = dev_get_drvdata(dev);
+
+	priv->wdog.parent = dev;
 	priv->wdog.ops = &abx80x_wdog_ops;
 	priv->wdog.info = &abx80x_wdog_info;
 	priv->wdog.min_timeout = 1;
@@ -716,10 +715,10 @@ static int abx80x_setup_watchdog(struct abx80x_priv *priv)
 
 	watchdog_set_drvdata(&priv->wdog, priv);
 
-	return devm_watchdog_register_device(&priv->client->dev, &priv->wdog);
+	return devm_watchdog_register_device(dev, &priv->wdog);
 }
 #else
-static int abx80x_setup_watchdog(struct abx80x_priv *priv)
+static int abx80x_setup_watchdog(struct device *dev)
 {
 	return 0;
 }
@@ -731,33 +730,29 @@ static int abx80x_nvmem_xfer(struct abx80x_priv *priv, unsigned int offset,
 	int ret;
 
 	while (bytes) {
-		u8 extram, reg, len, lower, upper;
+		u8 reg, len, lower, upper;
 
 		lower = FIELD_GET(NVMEM_ADDR_LOWER, offset);
 		upper = FIELD_GET(NVMEM_ADDR_UPPER, offset);
-		extram = FIELD_PREP(ABX8XX_EXTRAM_XADS, upper);
 		reg = ABX8XX_SRAM_BASE + lower;
 		len = min(lower + bytes, (size_t)ABX8XX_SRAM_WIN_SIZE) - lower;
 		len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
 
 		guard(mutex)(&priv->lock);
 
-		ret = i2c_smbus_write_byte_data(priv->client, ABX8XX_REG_EXTRAM,
-						extram);
+		ret = regmap_update_bits(priv->regmap, ABX8XX_REG_EXTRAM,
+					 ABX8XX_EXTRAM_XADS, upper);
 		if (ret)
 			return ret;
 
 		if (write) {
-			ret = i2c_smbus_write_i2c_block_data(priv->client, reg,
-							     len, val);
+			ret = regmap_bulk_write(priv->regmap, reg, val, len);
 			if (ret)
 				return ret;
 		} else {
-			ret = i2c_smbus_read_i2c_block_data(priv->client, reg,
-							    len, val);
-			if (ret <= 0)
-				return ret ? ret : -EIO;
-			len = ret;
+			ret = regmap_bulk_read(priv->regmap, reg, val, len);
+			if (ret)
+				return ret;
 		}
 
 		offset += len;
@@ -793,6 +788,38 @@ static int abx80x_setup_nvmem(struct abx80x_priv *priv)
 	return devm_rtc_nvmem_register(priv->rtc, &config);
 }
 
+static const struct regmap_range abx80x_no_read_ranges[] = {
+	regmap_reg_range(0x1e, 0x1e),
+	regmap_reg_range(0x22, 0x25),
+	regmap_reg_range(0x31, 0x3e),
+};
+
+static const struct regmap_range abx80x_no_write_ranges[] = {
+	regmap_reg_range(0x1e, 0x1e),
+	regmap_reg_range(0x22, 0x25),
+	regmap_reg_range(ABX8XX_REG_ID0, ABX8XX_REG_ID0 + 6),
+	regmap_reg_range(0x31, 0x3e),
+};
+
+static const struct regmap_access_table abx80x_read_table = {
+	.no_ranges = abx80x_no_read_ranges,
+	.n_no_ranges = ARRAY_SIZE(abx80x_no_read_ranges),
+};
+
+static const struct regmap_access_table abx80x_write_table = {
+	.no_ranges = abx80x_no_write_ranges,
+	.n_no_ranges = ARRAY_SIZE(abx80x_no_write_ranges),
+};
+
+static const struct regmap_config abx80x_regmap_config_i2c = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = ABX8XX_SRAM_BASE + ABX8XX_SRAM_WIN_SIZE - 1,
+
+	.rd_table = &abx80x_read_table,
+	.wr_table = &abx80x_write_table,
+};
+
 static const struct i2c_device_id abx80x_id[] = {
 	{ .name = "abx80x", .driver_data = ABX80X },
 	{ .name = "ab0801", .driver_data = AB0801 },
@@ -810,9 +837,11 @@ MODULE_DEVICE_TABLE(i2c, abx80x_id);
 
 static int abx80x_probe(struct i2c_client *client)
 {
+	struct regmap *regmap;
 	struct device_node *np = client->dev.of_node;
 	struct abx80x_priv *priv;
-	int i, data, err, trickle_cfg = -EINVAL;
+	int i, err, trickle_cfg = -EINVAL;
+	unsigned int data;
 	char buf[7];
 	unsigned int part = (uintptr_t)i2c_get_match_data(client);
 	unsigned int partnumber;
@@ -824,8 +853,30 @@ static int abx80x_probe(struct i2c_client *client)
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 		return -ENODEV;
 
-	err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ID0,
-					    sizeof(buf), buf);
+	regmap = devm_regmap_init_i2c(client, &abx80x_regmap_config_i2c);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Unable to allocate regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+	if (priv == NULL)
+		return -ENOMEM;
+
+	priv->rtc = devm_rtc_allocate_device(&client->dev);
+	if (IS_ERR(priv->rtc))
+		return PTR_ERR(priv->rtc);
+
+	priv->rtc->ops = &abx80x_rtc_ops;
+	priv->irq = client->irq;
+	priv->regmap = regmap;
+	err = devm_mutex_init(&client->dev, &priv->lock);
+	if (err)
+		return err;
+
+	dev_set_drvdata(&client->dev, priv);
+
+	err = regmap_bulk_read(regmap, ABX8XX_REG_ID0, buf, sizeof(buf));
 	if (err < 0) {
 		dev_err(&client->dev, "Unable to read partnumber\n");
 		return -EIO;
@@ -840,16 +891,14 @@ static int abx80x_probe(struct i2c_client *client)
 	dev_info(&client->dev, "model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n",
 		 partnumber, majrev, minrev, lot, wafer, uid);
 
-	data = i2c_smbus_read_byte_data(client, ABX8XX_REG_CTRL1);
-	if (data < 0) {
+	err = regmap_read(regmap, ABX8XX_REG_CTRL1, &data);
+	if (err < 0) {
 		dev_err(&client->dev, "Unable to read control register\n");
 		return -EIO;
 	}
 
-	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CTRL1,
-					((data & ~(ABX8XX_CTRL_12_24 |
-						   ABX8XX_CTRL_ARST)) |
-					 ABX8XX_CTRL_WRITE));
+	err = regmap_write(regmap, ABX8XX_REG_CTRL1,
+			   (data & ~(ABX8XX_CTRL_12_24 | ABX8XX_CTRL_ARST)) | ABX8XX_CTRL_WRITE);
 	if (err < 0) {
 		dev_err(&client->dev, "Unable to write control register\n");
 		return -EIO;
@@ -863,15 +912,15 @@ static int abx80x_probe(struct i2c_client *client)
 		 * register is set. RV-1805-C3 datasheet indicates that
 		 * the bit should be cleared in section 11h - Control2.
 		 */
-		data = i2c_smbus_read_byte_data(client, ABX8XX_REG_CTRL2);
-		if (data < 0) {
+		err = regmap_read(regmap, ABX8XX_REG_CTRL2, &data);
+		if (err < 0) {
 			dev_err(&client->dev,
 				"Unable to read control2 register\n");
 			return -EIO;
 		}
 
-		err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CTRL2,
-						data & ~ABX8XX_CTRL2_RSVD);
+		err = regmap_write(regmap, ABX8XX_REG_CTRL2,
+				   data & ~ABX8XX_CTRL2_RSVD);
 		if (err < 0) {
 			dev_err(&client->dev,
 				"Unable to write control2 register\n");
@@ -883,8 +932,8 @@ static int abx80x_probe(struct i2c_client *client)
 		 * 10pin package and the EXTI input is not present.
 		 * Disable it to avoid leakage.
 		 */
-		data = i2c_smbus_read_byte_data(client, ABX8XX_REG_OUT_CTRL);
-		if (data < 0) {
+		err = regmap_read(regmap, ABX8XX_REG_OUT_CTRL, &data);
+		if (err < 0) {
 			dev_err(&client->dev,
 				"Unable to read output control register\n");
 			return -EIO;
@@ -894,11 +943,11 @@ static int abx80x_probe(struct i2c_client *client)
 		 * Write the configuration key register to enable access to
 		 * the config2 register
 		 */
-		if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_MISC) < 0)
+		if (abx80x_write_config_key(&client->dev, ABX8XX_CFG_KEY_MISC) < 0)
 			return -EIO;
 
-		err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OUT_CTRL,
-						data | ABX8XX_OUT_CTRL_EXDS);
+		err = regmap_write(regmap, ABX8XX_REG_OUT_CTRL,
+				   data | ABX8XX_OUT_CTRL_EXDS);
 		if (err < 0) {
 			dev_err(&client->dev,
 				"Unable to write output control register\n");
@@ -926,38 +975,20 @@ static int abx80x_probe(struct i2c_client *client)
 	}
 
 	if (np && abx80x_caps[part].has_tc)
-		trickle_cfg = abx80x_dt_trickle_cfg(client);
+		trickle_cfg = abx80x_dt_trickle_cfg(&client->dev);
 
 	if (trickle_cfg > 0) {
 		dev_info(&client->dev, "Enabling trickle charger: %02x\n",
 			 trickle_cfg);
-		abx80x_enable_trickle_charger(client, trickle_cfg);
+		abx80x_enable_trickle_charger(&client->dev, trickle_cfg);
 	}
 
-	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CD_TIMER_CTL,
-					BIT(2));
-	if (err)
-		return err;
-
-	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
-	if (priv == NULL)
-		return -ENOMEM;
-
-	priv->rtc = devm_rtc_allocate_device(&client->dev);
-	if (IS_ERR(priv->rtc))
-		return PTR_ERR(priv->rtc);
-
-	priv->rtc->ops = &abx80x_rtc_ops;
-	priv->client = client;
-	priv->irq = client->irq;
-	err = devm_mutex_init(&client->dev, &priv->lock);
+	err = regmap_write(regmap, ABX8XX_REG_CD_TIMER_CTL, BIT(2));
 	if (err)
 		return err;
 
-	i2c_set_clientdata(client, priv);
-
 	if (abx80x_caps[part].has_wdog) {
-		err = abx80x_setup_watchdog(priv);
+		err = abx80x_setup_watchdog(&client->dev);
 		if (err)
 			return err;
 	}
@@ -967,31 +998,31 @@ static int abx80x_probe(struct i2c_client *client)
 		return err;
 
 	/* Disable unused interrupts */
-	data = i2c_smbus_read_byte_data(client, ABX8XX_REG_IRQ);
-	if (data < 0) {
+	err = regmap_read(regmap, ABX8XX_REG_IRQ, &data);
+	if (err < 0) {
 		dev_err(&client->dev, "Unable to read irq register\n");
 		return -EIO;
 	}
 
-	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_IRQ,
-					data & ~(ABX8XX_IRQ_EX1E |
-						 ABX8XX_IRQ_EX2E |
-						 ABX8XX_IRQ_TIE |
-						 ABX8XX_IRQ_BLIE));
+	err = regmap_write(regmap, ABX8XX_REG_IRQ,
+			   data & ~(ABX8XX_IRQ_EX1E |
+				    ABX8XX_IRQ_EX2E |
+				    ABX8XX_IRQ_TIE |
+				    ABX8XX_IRQ_BLIE));
 	if (err < 0) {
 		dev_err(&client->dev, "Unable to write irq register\n");
 		return -EIO;
 	}
 
-	data = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
-	if (data < 0) {
+	err = regmap_read(regmap, ABX8XX_REG_OSC, &data);
+	if (err < 0) {
 		dev_err(&client->dev, "Unable to read Oscillator Control register\n");
 		return -EIO;
 	}
 
-	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC,
-					data & ~(ABX8XX_OSC_ACIE |
-						 ABX8XX_OSC_OFIE));
+	err = regmap_write(regmap, ABX8XX_REG_OSC,
+			   data & ~(ABX8XX_OSC_ACIE |
+				    ABX8XX_OSC_OFIE));
 	if (err < 0) {
 		dev_err(&client->dev, "Unable to write Oscillator Control register\n");
 		return -EIO;
@@ -1003,7 +1034,7 @@ static int abx80x_probe(struct i2c_client *client)
 						abx80x_handle_irq,
 						IRQF_SHARED | IRQF_ONESHOT,
 						"abx8xx",
-						client);
+						&client->dev);
 		if (err) {
 			dev_err(&client->dev, "unable to request IRQ, alarms disabled\n");
 			priv->irq = 0;
-- 
2.55.0

[PATCH v4 7/9] rtc: abx80x: replace read-modify-write pattern with regmap helpers

[Antoni Pokusinski]

Before introducing the regmap usage in the driver, updating specific
bits of a register was performed using the read-modify-write pattern.
Now, the functions regmap_update_bits() and regmap_write_bits() can
be used to simplify the code.

Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 drivers/rtc/rtc-abx80x.c | 135 ++++++++++-----------------------------
 1 file changed, 35 insertions(+), 100 deletions(-)

diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 5d41882f3c70..ab88af43b4fa 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -232,7 +232,7 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct abx80x_priv *priv = dev_get_drvdata(dev);
 	unsigned char buf[8];
-	int err, flags;
+	int err;
 
 	if (tm->tm_year < 100)
 		return -EINVAL;
@@ -256,18 +256,11 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	}
 
 	/* Clear the OF bit of Oscillator Status Register */
-	err = regmap_read(priv->regmap, ABX8XX_REG_OSS, &flags);
+	err = regmap_update_bits(priv->regmap, ABX8XX_REG_OSS, ABX8XX_OSS_OF, 0);
 	if (err < 0)
-		return err;
-
-	err = regmap_write(priv->regmap, ABX8XX_REG_OSS,
-			   flags & ~ABX8XX_OSS_OF);
-	if (err < 0) {
 		dev_err(dev, "Unable to write oscillator status register\n");
-		return err;
-	}
 
-	return 0;
+	return err;
 }
 
 static irqreturn_t abx80x_handle_irq(int irq, void *dev_id)
@@ -378,7 +371,6 @@ static int abx80x_rtc_set_autocalibration(struct device *dev,
 {
 	struct abx80x_priv *priv = dev_get_drvdata(dev);
 	unsigned int flags = 0;
-	int retval;
 
 	if ((autocalibration != 0) && (autocalibration != 1024) &&
 	    (autocalibration != 512)) {
@@ -386,12 +378,6 @@ static int abx80x_rtc_set_autocalibration(struct device *dev,
 		return -EINVAL;
 	}
 
-	guard(mutex)(&priv->lock);
-
-	retval = regmap_read(priv->regmap, ABX8XX_REG_OSC, &flags);
-	if (retval < 0)
-		return retval;
-
 	if (autocalibration == 0) {
 		flags &= ~(ABX8XX_OSC_ACAL_512 | ABX8XX_OSC_ACAL_1024);
 	} else if (autocalibration == 1024) {
@@ -403,13 +389,15 @@ static int abx80x_rtc_set_autocalibration(struct device *dev,
 		flags |= (ABX8XX_OSC_ACAL_1024 | ABX8XX_OSC_ACAL_512);
 	}
 
+	guard(mutex)(&priv->lock);
+
 	/* Unlock write access to Oscillator Control Register */
 	if (abx80x_write_config_key(dev, ABX8XX_CFG_KEY_OSC) < 0)
 		return -EIO;
 
-	retval = regmap_write(priv->regmap, ABX8XX_REG_OSC, flags);
-
-	return retval;
+	return regmap_write_bits(priv->regmap, ABX8XX_REG_OSC,
+				 ABX8XX_OSC_ACAL_1024 | ABX8XX_OSC_ACAL_512,
+				 flags);
 }
 
 static int abx80x_rtc_get_autocalibration(struct device *dev)
@@ -473,7 +461,6 @@ static ssize_t oscillator_store(struct device *dev,
 {
 	struct abx80x_priv *priv = dev_get_drvdata(dev->parent);
 	int retval, rc_mode = 0;
-	unsigned int flags;
 
 	if (strncmp(buf, "rc", 2) == 0) {
 		rc_mode = 1;
@@ -486,24 +473,14 @@ static ssize_t oscillator_store(struct device *dev,
 
 	guard(mutex)(&priv->lock);
 
-	retval = regmap_read(priv->regmap, ABX8XX_REG_OSC, &flags);
-	if (retval < 0)
-		return retval;
-
-	if (rc_mode == 0)
-		flags &= ~(ABX8XX_OSC_OSEL);
-	else
-		flags |= (ABX8XX_OSC_OSEL);
-
 	/* Unlock write access on Oscillator Control register */
 	if (abx80x_write_config_key(dev->parent, ABX8XX_CFG_KEY_OSC) < 0)
 		return -EIO;
 
-	retval = regmap_write(priv->regmap, ABX8XX_REG_OSC, flags);
-	if (retval < 0) {
+	retval = regmap_write_bits(priv->regmap, ABX8XX_REG_OSC, ABX8XX_OSC_OSEL,
+				   rc_mode == 0 ? 0 : (ABX8XX_OSC_OSEL));
+	if (retval < 0)
 		dev_err(dev, "Failed to write Oscillator Control register\n");
-		return retval;
-	}
 
 	return retval ? retval : count;
 }
@@ -573,18 +550,11 @@ static int abx80x_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 
 	case RTC_VL_CLR:
 		scoped_guard(mutex, &priv->lock) {
-			err = regmap_read(priv->regmap, ABX8XX_REG_STATUS, &status);
-			if (err < 0)
-				return err;
-
-			status &= ~ABX8XX_STATUS_BLF;
-
-			err = regmap_write(priv->regmap, ABX8XX_REG_STATUS, status);
-			if (err < 0)
-				return err;
+			err = regmap_update_bits(priv->regmap, ABX8XX_REG_STATUS,
+						 ABX8XX_STATUS_BLF, 0);
 		}
 
-		return 0;
+		return err;
 
 	default:
 		return -ENOIOCTLCMD;
@@ -841,7 +811,6 @@ static int abx80x_probe(struct i2c_client *client)
 	struct device_node *np = client->dev.of_node;
 	struct abx80x_priv *priv;
 	int i, err, trickle_cfg = -EINVAL;
-	unsigned int data;
 	char buf[7];
 	unsigned int part = (uintptr_t)i2c_get_match_data(client);
 	unsigned int partnumber;
@@ -891,14 +860,9 @@ static int abx80x_probe(struct i2c_client *client)
 	dev_info(&client->dev, "model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n",
 		 partnumber, majrev, minrev, lot, wafer, uid);
 
-	err = regmap_read(regmap, ABX8XX_REG_CTRL1, &data);
-	if (err < 0) {
-		dev_err(&client->dev, "Unable to read control register\n");
-		return -EIO;
-	}
-
-	err = regmap_write(regmap, ABX8XX_REG_CTRL1,
-			   (data & ~(ABX8XX_CTRL_12_24 | ABX8XX_CTRL_ARST)) | ABX8XX_CTRL_WRITE);
+	err = regmap_update_bits(regmap, ABX8XX_REG_CTRL1,
+				 ABX8XX_CTRL_12_24 | ABX8XX_CTRL_ARST | ABX8XX_CTRL_WRITE,
+				 ABX8XX_CTRL_WRITE);
 	if (err < 0) {
 		dev_err(&client->dev, "Unable to write control register\n");
 		return -EIO;
@@ -912,30 +876,10 @@ static int abx80x_probe(struct i2c_client *client)
 		 * register is set. RV-1805-C3 datasheet indicates that
 		 * the bit should be cleared in section 11h - Control2.
 		 */
-		err = regmap_read(regmap, ABX8XX_REG_CTRL2, &data);
-		if (err < 0) {
-			dev_err(&client->dev,
-				"Unable to read control2 register\n");
-			return -EIO;
-		}
-
-		err = regmap_write(regmap, ABX8XX_REG_CTRL2,
-				   data & ~ABX8XX_CTRL2_RSVD);
-		if (err < 0) {
-			dev_err(&client->dev,
-				"Unable to write control2 register\n");
-			return -EIO;
-		}
-
-		/*
-		 * Avoid extra power leakage. The RV1805 uses smaller
-		 * 10pin package and the EXTI input is not present.
-		 * Disable it to avoid leakage.
-		 */
-		err = regmap_read(regmap, ABX8XX_REG_OUT_CTRL, &data);
+		err = regmap_update_bits(regmap, ABX8XX_REG_CTRL2,
+					 ABX8XX_CTRL2_RSVD, 0);
 		if (err < 0) {
-			dev_err(&client->dev,
-				"Unable to read output control register\n");
+			dev_err(&client->dev, "Unable to write control2 register\n");
 			return -EIO;
 		}
 
@@ -946,8 +890,14 @@ static int abx80x_probe(struct i2c_client *client)
 		if (abx80x_write_config_key(&client->dev, ABX8XX_CFG_KEY_MISC) < 0)
 			return -EIO;
 
-		err = regmap_write(regmap, ABX8XX_REG_OUT_CTRL,
-				   data | ABX8XX_OUT_CTRL_EXDS);
+		/*
+		 * Avoid extra power leakage. The RV1805 uses smaller
+		 * 10pin package and the EXTI input is not present.
+		 * Disable it to avoid leakage.
+		 */
+		err = regmap_write_bits(regmap, ABX8XX_REG_OUT_CTRL,
+					ABX8XX_OUT_CTRL_EXDS,
+					ABX8XX_OUT_CTRL_EXDS);
 		if (err < 0) {
 			dev_err(&client->dev,
 				"Unable to write output control register\n");
@@ -998,33 +948,18 @@ static int abx80x_probe(struct i2c_client *client)
 		return err;
 
 	/* Disable unused interrupts */
-	err = regmap_read(regmap, ABX8XX_REG_IRQ, &data);
-	if (err < 0) {
-		dev_err(&client->dev, "Unable to read irq register\n");
-		return -EIO;
-	}
-
-	err = regmap_write(regmap, ABX8XX_REG_IRQ,
-			   data & ~(ABX8XX_IRQ_EX1E |
-				    ABX8XX_IRQ_EX2E |
-				    ABX8XX_IRQ_TIE |
-				    ABX8XX_IRQ_BLIE));
-	if (err < 0) {
-		dev_err(&client->dev, "Unable to write irq register\n");
-		return -EIO;
-	}
-
-	err = regmap_read(regmap, ABX8XX_REG_OSC, &data);
+	err = regmap_update_bits(regmap, ABX8XX_REG_IRQ,
+				 ABX8XX_IRQ_EX1E | ABX8XX_IRQ_EX2E |
+				 ABX8XX_IRQ_TIE | ABX8XX_IRQ_BLIE, 0);
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to read Oscillator Control register\n");
+		dev_err(&client->dev, "Unable to update irq register\n");
 		return -EIO;
 	}
 
-	err = regmap_write(regmap, ABX8XX_REG_OSC,
-			   data & ~(ABX8XX_OSC_ACIE |
-				    ABX8XX_OSC_OFIE));
+	err = regmap_update_bits(regmap, ABX8XX_REG_OSC,
+				 ABX8XX_OSC_ACIE | ABX8XX_OSC_OFIE, 0);
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to write Oscillator Control register\n");
+		dev_err(&client->dev, "Unable to update Oscillator Control register\n");
 		return -EIO;
 	}
 
-- 
2.55.0

[PATCH v4 8/9] rtc: abx80x: create abx80x_i2c_probe()

[Antoni Pokusinski]

Move the I2C-specific code from abx80x_probe() to the newly created
function. This is a preparation for introducing the support for
ABX81X RTCs which use SPI interface.

Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 drivers/rtc/rtc-abx80x.c | 171 ++++++++++++++++++++++++---------------
 1 file changed, 105 insertions(+), 66 deletions(-)

diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index ab88af43b4fa..08b22c067699 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -781,73 +781,38 @@ static const struct regmap_access_table abx80x_write_table = {
 	.n_no_ranges = ARRAY_SIZE(abx80x_no_write_ranges),
 };
 
-static const struct regmap_config abx80x_regmap_config_i2c = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = ABX8XX_SRAM_BASE + ABX8XX_SRAM_WIN_SIZE - 1,
-
-	.rd_table = &abx80x_read_table,
-	.wr_table = &abx80x_write_table,
-};
-
-static const struct i2c_device_id abx80x_id[] = {
-	{ .name = "abx80x", .driver_data = ABX80X },
-	{ .name = "ab0801", .driver_data = AB0801 },
-	{ .name = "ab0803", .driver_data = AB0803 },
-	{ .name = "ab0804", .driver_data = AB0804 },
-	{ .name = "ab0805", .driver_data = AB0805 },
-	{ .name = "ab1801", .driver_data = AB1801 },
-	{ .name = "ab1803", .driver_data = AB1803 },
-	{ .name = "ab1804", .driver_data = AB1804 },
-	{ .name = "ab1805", .driver_data = AB1805 },
-	{ .name = "rv1805", .driver_data = RV1805 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, abx80x_id);
-
-static int abx80x_probe(struct i2c_client *client)
+static int abx80x_probe(struct device *dev, struct regmap *regmap, int irq,
+			struct device_node *np, unsigned int part)
 {
-	struct regmap *regmap;
-	struct device_node *np = client->dev.of_node;
 	struct abx80x_priv *priv;
 	int i, err, trickle_cfg = -EINVAL;
 	char buf[7];
-	unsigned int part = (uintptr_t)i2c_get_match_data(client);
 	unsigned int partnumber;
 	unsigned int majrev, minrev;
 	unsigned int lot;
 	unsigned int wafer;
 	unsigned int uid;
 
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
-		return -ENODEV;
-
-	regmap = devm_regmap_init_i2c(client, &abx80x_regmap_config_i2c);
-	if (IS_ERR(regmap)) {
-		dev_err(&client->dev, "Unable to allocate regmap\n");
-		return PTR_ERR(regmap);
-	}
-
-	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (priv == NULL)
 		return -ENOMEM;
 
-	priv->rtc = devm_rtc_allocate_device(&client->dev);
+	priv->rtc = devm_rtc_allocate_device(dev);
 	if (IS_ERR(priv->rtc))
 		return PTR_ERR(priv->rtc);
 
 	priv->rtc->ops = &abx80x_rtc_ops;
-	priv->irq = client->irq;
+	priv->irq = irq;
 	priv->regmap = regmap;
-	err = devm_mutex_init(&client->dev, &priv->lock);
+	err = devm_mutex_init(dev, &priv->lock);
 	if (err)
 		return err;
 
-	dev_set_drvdata(&client->dev, priv);
+	dev_set_drvdata(dev, priv);
 
 	err = regmap_bulk_read(regmap, ABX8XX_REG_ID0, buf, sizeof(buf));
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to read partnumber\n");
+		dev_err(dev, "Unable to read partnumber\n");
 		return -EIO;
 	}
 
@@ -857,14 +822,14 @@ static int abx80x_probe(struct i2c_client *client)
 	lot = ((buf[4] & 0x80) << 2) | ((buf[6] & 0x80) << 1) | buf[3];
 	uid = ((buf[4] & 0x7f) << 8) | buf[5];
 	wafer = (buf[6] & 0x7c) >> 2;
-	dev_info(&client->dev, "model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n",
+	dev_info(dev, "model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n",
 		 partnumber, majrev, minrev, lot, wafer, uid);
 
 	err = regmap_update_bits(regmap, ABX8XX_REG_CTRL1,
 				 ABX8XX_CTRL_12_24 | ABX8XX_CTRL_ARST | ABX8XX_CTRL_WRITE,
 				 ABX8XX_CTRL_WRITE);
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to write control register\n");
+		dev_err(dev, "Unable to write control register\n");
 		return -EIO;
 	}
 
@@ -879,7 +844,7 @@ static int abx80x_probe(struct i2c_client *client)
 		err = regmap_update_bits(regmap, ABX8XX_REG_CTRL2,
 					 ABX8XX_CTRL2_RSVD, 0);
 		if (err < 0) {
-			dev_err(&client->dev, "Unable to write control2 register\n");
+			dev_err(dev, "Unable to write control2 register\n");
 			return -EIO;
 		}
 
@@ -887,7 +852,7 @@ static int abx80x_probe(struct i2c_client *client)
 		 * Write the configuration key register to enable access to
 		 * the config2 register
 		 */
-		if (abx80x_write_config_key(&client->dev, ABX8XX_CFG_KEY_MISC) < 0)
+		if (abx80x_write_config_key(dev, ABX8XX_CFG_KEY_MISC) < 0)
 			return -EIO;
 
 		/*
@@ -899,7 +864,7 @@ static int abx80x_probe(struct i2c_client *client)
 					ABX8XX_OUT_CTRL_EXDS,
 					ABX8XX_OUT_CTRL_EXDS);
 		if (err < 0) {
-			dev_err(&client->dev,
+			dev_err(dev,
 				"Unable to write output control register\n");
 			return -EIO;
 		}
@@ -911,26 +876,24 @@ static int abx80x_probe(struct i2c_client *client)
 			if (partnumber == abx80x_caps[i].pn)
 				break;
 		if (abx80x_caps[i].pn == 0) {
-			dev_err(&client->dev, "Unknown part: %04x\n",
-				partnumber);
+			dev_err(dev, "Unknown part: %04x\n", partnumber);
 			return -EINVAL;
 		}
 		part = i;
 	}
 
 	if (partnumber != abx80x_caps[part].pn) {
-		dev_err(&client->dev, "partnumber mismatch %04x != %04x\n",
+		dev_err(dev, "partnumber mismatch %04x != %04x\n",
 			partnumber, abx80x_caps[part].pn);
 		return -EINVAL;
 	}
 
 	if (np && abx80x_caps[part].has_tc)
-		trickle_cfg = abx80x_dt_trickle_cfg(&client->dev);
+		trickle_cfg = abx80x_dt_trickle_cfg(dev);
 
 	if (trickle_cfg > 0) {
-		dev_info(&client->dev, "Enabling trickle charger: %02x\n",
-			 trickle_cfg);
-		abx80x_enable_trickle_charger(&client->dev, trickle_cfg);
+		dev_info(dev, "Enabling trickle charger: %02x\n", trickle_cfg);
+		abx80x_enable_trickle_charger(dev, trickle_cfg);
 	}
 
 	err = regmap_write(regmap, ABX8XX_REG_CD_TIMER_CTL, BIT(2));
@@ -938,7 +901,7 @@ static int abx80x_probe(struct i2c_client *client)
 		return err;
 
 	if (abx80x_caps[part].has_wdog) {
-		err = abx80x_setup_watchdog(&client->dev);
+		err = abx80x_setup_watchdog(dev);
 		if (err)
 			return err;
 	}
@@ -952,26 +915,26 @@ static int abx80x_probe(struct i2c_client *client)
 				 ABX8XX_IRQ_EX1E | ABX8XX_IRQ_EX2E |
 				 ABX8XX_IRQ_TIE | ABX8XX_IRQ_BLIE, 0);
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to update irq register\n");
+		dev_err(dev, "Unable to update irq register\n");
 		return -EIO;
 	}
 
 	err = regmap_update_bits(regmap, ABX8XX_REG_OSC,
 				 ABX8XX_OSC_ACIE | ABX8XX_OSC_OFIE, 0);
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to update Oscillator Control register\n");
+		dev_err(dev, "Unable to update Oscillator Control register\n");
 		return -EIO;
 	}
 
 	if (priv->irq > 0) {
-		dev_info(&client->dev, "IRQ %d supplied\n", priv->irq);
-		err = devm_request_threaded_irq(&client->dev, priv->irq, NULL,
+		dev_info(dev, "IRQ %d supplied\n", priv->irq);
+		err = devm_request_threaded_irq(dev, priv->irq, NULL,
 						abx80x_handle_irq,
 						IRQF_SHARED | IRQF_ONESHOT,
 						"abx8xx",
-						&client->dev);
+						dev);
 		if (err) {
-			dev_err(&client->dev, "unable to request IRQ, alarms disabled\n");
+			dev_err(dev, "unable to request IRQ, alarms disabled\n");
 			priv->irq = 0;
 		}
 	}
@@ -980,14 +943,39 @@ static int abx80x_probe(struct i2c_client *client)
 
 	err = rtc_add_group(priv->rtc, &rtc_calib_attr_group);
 	if (err) {
-		dev_err(&client->dev, "Failed to create sysfs group: %d\n",
-			err);
+		dev_err(dev, "Failed to create sysfs group: %d\n", err);
 		return err;
 	}
 
 	return devm_rtc_register_device(priv->rtc);
 }
 
+#if IS_ENABLED(CONFIG_I2C)
+
+static const struct regmap_config abx80x_regmap_config_i2c = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = ABX8XX_SRAM_BASE + ABX8XX_SRAM_WIN_SIZE - 1,
+
+	.rd_table = &abx80x_read_table,
+	.wr_table = &abx80x_write_table,
+};
+
+static const struct i2c_device_id abx80x_id[] = {
+	{ .name = "abx80x", .driver_data = ABX80X },
+	{ .name = "ab0801", .driver_data = AB0801 },
+	{ .name = "ab0803", .driver_data = AB0803 },
+	{ .name = "ab0804", .driver_data = AB0804 },
+	{ .name = "ab0805", .driver_data = AB0805 },
+	{ .name = "ab1801", .driver_data = AB1801 },
+	{ .name = "ab1803", .driver_data = AB1803 },
+	{ .name = "ab1804", .driver_data = AB1804 },
+	{ .name = "ab1805", .driver_data = AB1805 },
+	{ .name = "rv1805", .driver_data = RV1805 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, abx80x_id);
+
 #ifdef CONFIG_OF
 static const struct of_device_id abx80x_of_match[] = {
 	{
@@ -1035,16 +1023,67 @@ static const struct of_device_id abx80x_of_match[] = {
 MODULE_DEVICE_TABLE(of, abx80x_of_match);
 #endif
 
+static int abx80x_i2c_probe(struct i2c_client *client)
+{
+	unsigned int part = (uintptr_t)i2c_get_match_data(client);
+	struct regmap *regmap;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	regmap = devm_regmap_init_i2c(client, &abx80x_regmap_config_i2c);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Unable to allocate regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	return abx80x_probe(&client->dev, regmap, client->irq,
+			    client->dev.of_node, part);
+}
+
 static struct i2c_driver abx80x_driver = {
 	.driver		= {
 		.name	= "rtc-abx80x",
 		.of_match_table = of_match_ptr(abx80x_of_match),
 	},
-	.probe		= abx80x_probe,
+	.probe		= abx80x_i2c_probe,
 	.id_table	= abx80x_id,
 };
 
-module_i2c_driver(abx80x_driver);
+static int abx80x_register_driver(void)
+{
+	return i2c_add_driver(&abx80x_driver);
+}
+
+static void abx80x_unregister_driver(void)
+{
+	i2c_del_driver(&abx80x_driver);
+}
+
+#else
+
+static int abx80x_register_driver(void)
+{
+	return 0;
+}
+
+static void abx80x_unregister_driver(void)
+{
+}
+
+#endif /* IS_ENABLED(CONFIG_I2C) */
+
+static int __init abx80x_init(void)
+{
+	return abx80x_register_driver();
+}
+module_init(abx80x_init);
+
+static void __exit abx80x_exit(void)
+{
+	abx80x_unregister_driver();
+}
+module_exit(abx80x_exit);
 
 MODULE_AUTHOR("Philippe De Muyter <phdm@macqel.be>");
 MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>");
-- 
2.55.0

[PATCH v4 9/9] rtc: abx80x: add support for ABX81X

[Antoni Pokusinski]

Abracon ABX81X is a family of RTCs with SPI interface featuring
the same functionalities as the ABX80X I2C clocks.

Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 drivers/rtc/Kconfig      |  26 +++++-----
 drivers/rtc/rtc-abx80x.c | 106 +++++++++++++++++++++++++++++++++++++--
 2 files changed, 115 insertions(+), 17 deletions(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 4d14bcba616e..d35221f81024 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -212,18 +212,6 @@ config RTC_DRV_ABEOZ9
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-ab-e0z9.
 
-config RTC_DRV_ABX80X
-	tristate "Abracon ABx80x"
-	select WATCHDOG_CORE if WATCHDOG
-	select REGMAP_I2C
-	help
-	  If you say yes here you get support for Abracon AB080X and AB180X
-	  families of ultra-low-power  battery- and capacitor-backed real-time
-	  clock chips.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called rtc-abx80x.
-
 config RTC_DRV_AC100
 	tristate "X-Powers AC100"
 	depends on MFD_AC100
@@ -955,6 +943,20 @@ config RTC_I2C_AND_SPI
 
 comment "SPI and I2C RTC drivers"
 
+config RTC_DRV_ABX80X
+	tristate "Abracon ABx80x"
+	depends on RTC_I2C_AND_SPI
+	select WATCHDOG_CORE if WATCHDOG
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
+	help
+	  If you say yes here you get support for Abracon AB080X, AB180X,
+	  AB081X and AB181X families of ultra-low-power  battery- and
+	  capacitor-backed real-time clock chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-abx80x.
+
 config RTC_DRV_DS3232
 	tristate "Dallas/Maxim DS3232/DS3234"
 	depends on RTC_I2C_AND_SPI
diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 08b22c067699..7145de876b50 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * A driver for the I2C members of the Abracon AB x8xx RTC family,
- * and compatible: AB 1805 and AB 0805
+ * A driver for the I2C and SPI members of the Abracon AB x8xx RTC family,
+ * and compatible: AB 1805, AB 0805, AB 1815 and AB 0815
  *
  * Copyright 2014-2015 Macq S.A.
  *
@@ -19,6 +19,7 @@
 #include <linux/of.h>
 #include <linux/regmap.h>
 #include <linux/rtc.h>
+#include <linux/spi/spi.h>
 #include <linux/watchdog.h>
 
 #define ABX8XX_REG_HTH		0x00
@@ -109,8 +110,8 @@
 
 static u8 trickle_resistors[] = {0, 3, 6, 11};
 
-enum abx80x_chip {AB0801, AB0803, AB0804, AB0805,
-	AB1801, AB1803, AB1804, AB1805, RV1805, ABX80X};
+enum abx80x_chip {AB0801, AB0803, AB0804, AB0805, AB0815,
+	AB1801, AB1803, AB1804, AB1805, AB1815, RV1805, ABX80X};
 
 struct abx80x_cap {
 	u16 pn;
@@ -123,10 +124,12 @@ static struct abx80x_cap abx80x_caps[] = {
 	[AB0803] = {.pn = 0x0803},
 	[AB0804] = {.pn = 0x0804, .has_tc = true, .has_wdog = true},
 	[AB0805] = {.pn = 0x0805, .has_tc = true, .has_wdog = true},
+	[AB0815] = {.pn = 0x0815, .has_tc = true, .has_wdog = true},
 	[AB1801] = {.pn = 0x1801},
 	[AB1803] = {.pn = 0x1803},
 	[AB1804] = {.pn = 0x1804, .has_tc = true, .has_wdog = true},
 	[AB1805] = {.pn = 0x1805, .has_tc = true, .has_wdog = true},
+	[AB1815] = {.pn = 0x1815, .has_tc = true, .has_wdog = true},
 	[RV1805] = {.pn = 0x1805, .has_tc = true, .has_wdog = true},
 	[ABX80X] = {.pn = 0}
 };
@@ -1073,14 +1076,107 @@ static void abx80x_unregister_driver(void)
 
 #endif /* IS_ENABLED(CONFIG_I2C) */
 
+#if IS_ENABLED(CONFIG_SPI_MASTER)
+
+static const struct regmap_config abx80x_regmap_config_spi = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = ABX8XX_SRAM_BASE + ABX8XX_SRAM_WIN_SIZE - 1,
+
+	.rd_table = &abx80x_read_table,
+	.wr_table = &abx80x_write_table,
+
+	.write_flag_mask = BIT(7),
+};
+
+static const struct spi_device_id abx81x_id[] = {
+	{ "ab0815", AB0815 },
+	{ "ab1815", AB1815 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, abx81x_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id abx81x_of_match[] = {
+	{
+		.compatible = "abracon,ab0815",
+		.data = (void *)AB0815
+	},
+	{
+		.compatible = "abracon,ab1815",
+		.data = (void *)AB1815
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, abx81x_of_match);
+#endif
+
+static int abx81x_spi_probe(struct spi_device *spi)
+{
+	unsigned int part = (uintptr_t)spi_get_device_match_data(spi);
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_spi(spi, &abx80x_regmap_config_spi);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "Unable to allocate regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	return abx80x_probe(&spi->dev, regmap, spi->irq,
+			    spi->dev.of_node, part);
+}
+
+static struct spi_driver abx81x_driver = {
+	.driver		= {
+		.name	= "rtc-abx81x",
+		.of_match_table = of_match_ptr(abx81x_of_match),
+	},
+	.probe		= abx81x_spi_probe,
+	.id_table	= abx81x_id,
+};
+
+static int abx81x_register_driver(void)
+{
+	return spi_register_driver(&abx81x_driver);
+}
+
+static void abx81x_unregister_driver(void)
+{
+	spi_unregister_driver(&abx81x_driver);
+}
+
+#else
+
+static int abx81x_register_driver(void)
+{
+	return 0;
+}
+
+static void abx81x_unregister_driver(void)
+{
+}
+
+#endif /* IS_ENABLED(CONFIG_SPI_MASTER) */
+
 static int __init abx80x_init(void)
 {
-	return abx80x_register_driver();
+	int ret;
+
+	ret = abx80x_register_driver();
+	if (ret)
+		return ret;
+
+	ret = abx81x_register_driver();
+	if (ret)
+		abx80x_unregister_driver();
+
+	return ret;
 }
 module_init(abx80x_init);
 
 static void __exit abx80x_exit(void)
 {
+	abx81x_unregister_driver();
 	abx80x_unregister_driver();
 }
 module_exit(abx80x_exit);
-- 
2.55.0