[rtc-linux] [PATCH] rtc: ds1307: Fix alarm programming for mcp794xx

[rtc-linux] [PATCH] rtc: ds1307: Fix alarm programming for mcp794xx

[Tero Kristo]

mcp794xx alarm registers must be written in BCD format. However, the
alarm programming logic neglected this by adding one to the value
after bin2bcd conversion has been already done, writing bad values
to month register in case the alarm being set is in October. In this
case, the alarm month value becomes 0x0a instead of the expected 0x10.

Fix by moving the +1 addition within the bin2bcd call also.

Fixes: 1d1945d261a2 ("drivers/rtc/rtc-ds1307.c: add alarm support for mcp7941x chips")

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/rtc/rtc-ds1307.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index a705e64..188006c 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -718,9 +718,9 @@ static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 	regs[3] = bin2bcd(t->time.tm_sec);
 	regs[4] = bin2bcd(t->time.tm_min);
 	regs[5] = bin2bcd(t->time.tm_hour);
-	regs[6] = bin2bcd(t->time.tm_wday) + 1;
+	regs[6] = bin2bcd(t->time.tm_wday + 1);
 	regs[7] = bin2bcd(t->time.tm_mday);
-	regs[8] = bin2bcd(t->time.tm_mon) + 1;
+	regs[8] = bin2bcd(t->time.tm_mon + 1);
 
 	/* Clear the alarm 0 interrupt flag. */
 	regs[6] &= ~MCP794XX_BIT_ALMX_IF;
-- 
1.7.9.5

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[rtc-linux] Re: [PATCH] rtc: ds1307: Fix alarm programming for mcp794xx

[Nishanth Menon]

On 10/23/2015 01:29 AM, Tero Kristo wrote:
> mcp794xx alarm registers must be written in BCD format. However, the
> alarm programming logic neglected this by adding one to the value
> after bin2bcd conversion has been already done, writing bad values
> to month register in case the alarm being set is in October. In this
> case, the alarm month value becomes 0x0a instead of the expected 0x10.
> 
> Fix by moving the +1 addition within the bin2bcd call also.
> 
> Fixes: 1d1945d261a2 ("drivers/rtc/rtc-ds1307.c: add alarm support for mcp7941x chips")
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

Nice catch.
Acked-by: Nishanth Menon <nm@ti.com>
> ---
>  drivers/rtc/rtc-ds1307.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
> index a705e64..188006c 100644
> --- a/drivers/rtc/rtc-ds1307.c
> +++ b/drivers/rtc/rtc-ds1307.c
> @@ -718,9 +718,9 @@ static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
>  	regs[3] = bin2bcd(t->time.tm_sec);
>  	regs[4] = bin2bcd(t->time.tm_min);
>  	regs[5] = bin2bcd(t->time.tm_hour);
> -	regs[6] = bin2bcd(t->time.tm_wday) + 1;
> +	regs[6] = bin2bcd(t->time.tm_wday + 1);
>  	regs[7] = bin2bcd(t->time.tm_mday);
> -	regs[8] = bin2bcd(t->time.tm_mon) + 1;
> +	regs[8] = bin2bcd(t->time.tm_mon + 1);
>  
>  	/* Clear the alarm 0 interrupt flag. */
>  	regs[6] &= ~MCP794XX_BIT_ALMX_IF;
> 


-- 
Regards,
Nishanth Menon

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[rtc-linux] Re: [PATCH] rtc: ds1307: Fix alarm programming for mcp794xx

[Alexandre Belloni]

On 23/10/2015 at 09:29:57 +0300, Tero Kristo wrote :
> mcp794xx alarm registers must be written in BCD format. However, the
> alarm programming logic neglected this by adding one to the value
> after bin2bcd conversion has been already done, writing bad values
> to month register in case the alarm being set is in October. In this
> case, the alarm month value becomes 0x0a instead of the expected 0x10.
> 
> Fix by moving the +1 addition within the bin2bcd call also.
> 
> Fixes: 1d1945d261a2 ("drivers/rtc/rtc-ds1307.c: add alarm support for mcp7941x chips")
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>  drivers/rtc/rtc-ds1307.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
Applied, thanks.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.