From: Sam Ravnborg <sam@ravnborg.org>
To: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: linux-kernel@vger.kernel.org, linux-s390@vger.kernel.org
Subject: [PATCH 1/2] s390: beautify vmlinux.lds
Date: Thu, 4 Oct 2007 21:15:10 +0200 [thread overview]
Message-ID: <20071004191510.GB23211@uranus.ravnborg.org> (raw)
In-Reply-To: <20071004112706.574737175@de.ibm.com>
Introduce a consistent style in vmlinux.lds.
This style is gradually being introduced for all archs.
A few lables were moved inside the section definition so
they are assigned the correct value of gcc decide to align
the content to another address than the one . has.
In the past this has fixed several bugs but for s390 it
will not impact due to all the alignmnet already introduced.
Stabs definitions are consolidated in asm-generic/vmlinux.lds.h
This patch also introduce support for DWARF - without knowing
if this makes sense for s390.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
build tested only
vmlinux.lds.S | 233 +++++++++++++++++++++++++++++++---------------------------
1 file changed, 127 insertions(+), 106 deletions(-)
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index b4622a3..3a364d1 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -18,121 +18,142 @@ jiffies = jiffies_64;
SECTIONS
{
- . = 0x00000000;
- _text = .; /* Text and read-only data */
- .text : {
- *(.text.head)
+ . = 0x00000000;
+ .text : {
+ _text = .; /* Text and read-only data */
+ *(.text.head)
TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- *(.fixup)
- *(.gnu.warning)
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.fixup)
+ *(.gnu.warning)
} = 0x0700
- _etext = .; /* End of text section */
+ _etext = .; /* End of text section */
- RODATA
+ RODATA
#ifdef CONFIG_SHARED_KERNEL
- . = ALIGN(1048576); /* VM shared segments are 1MB aligned */
+ . = ALIGN(1048576); /* VM shared segments are 1MB aligned */
#endif
- . = ALIGN(4096);
- _eshared = .; /* End of shareable data */
-
- . = ALIGN(16); /* Exception table */
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- NOTES
-
- BUG_TABLE
-
- .data : { /* Data */
- DATA_DATA
- CONSTRUCTORS
- }
-
- . = ALIGN(4096);
- __nosave_begin = .;
- .data_nosave : { *(.data.nosave) }
- . = ALIGN(4096);
- __nosave_end = .;
-
- . = ALIGN(4096);
- .data.page_aligned : { *(.data.idt) }
-
- . = ALIGN(256);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
- . = ALIGN(256);
- .data.read_mostly : { *(.data.read_mostly) }
- _edata = .; /* End of data section */
-
- . = ALIGN(8192); /* init_task */
- .data.init_task : { *(.data.init_task) }
-
- /* will be freed after init */
- . = ALIGN(4096); /* Init code and data */
- __init_begin = .;
- .init.text : {
- _sinittext = .;
- *(.init.text)
- _einittext = .;
- }
- /*
- * .exit.text is discarded at runtime, not link time,
- * to deal with references from __bug_table
- */
- .exit.text : { *(.exit.text) }
-
- .init.data : { *(.init.data) }
- . = ALIGN(256);
- __setup_start = .;
- .init.setup : { *(.init.setup) }
- __setup_end = .;
- __initcall_start = .;
- .initcall.init : {
- INITCALLS
- }
- __initcall_end = .;
- __con_initcall_start = .;
- .con_initcall.init : { *(.con_initcall.init) }
- __con_initcall_end = .;
- SECURITY_INIT
+ . = ALIGN(4096);
+ _eshared = .; /* End of shareable data */
+
+ . = ALIGN(16); /* Exception table */
+ __ex_table : {
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+ }
+
+ NOTES
+ BUG_TABLE
+
+ .data : { /* Data */
+ DATA_DATA
+ CONSTRUCTORS
+ }
+
+ . = ALIGN(4096);
+ .data_nosave : {
+ __nosave_begin = .;
+ *(.data.nosave)
+ }
+ . = ALIGN(4096);
+ __nosave_end = .;
+
+ . = ALIGN(4096);
+ .data.page_aligned : {
+ *(.data.idt)
+ }
+
+ . = ALIGN(256);
+ .data.cacheline_aligned : {
+ *(.data.cacheline_aligned)
+ }
+
+ . = ALIGN(256);
+ .data.read_mostly : {
+ *(.data.read_mostly)
+ }
+ _edata = .; /* End of data section */
+
+ . = ALIGN(8192); /* init_task */
+ .data.init_task : {
+ *(.data.init_task)
+ }
+
+ /* will be freed after init */
+ . = ALIGN(4096); /* Init code and data */
+ __init_begin = .;
+ .init.text : {
+ _sinittext = .;
+ *(.init.text)
+ _einittext = .;
+ }
+ /*
+ * .exit.text is discarded at runtime, not link time,
+ * to deal with references from __bug_table
+ */
+ .exit.text : {
+ *(.exit.text)
+ }
+
+ .init.data : {
+ *(.init.data)
+ }
+ . = ALIGN(256);
+ .init.setup : {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
+ .initcall.init : {
+ __initcall_start = .;
+ INITCALLS
+ __initcall_end = .;
+ }
+
+ .con_initcall.init : {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+ SECURITY_INIT
#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(256);
- __initramfs_start = .;
- .init.ramfs : { *(.init.initramfs) }
- . = ALIGN(2);
- __initramfs_end = .;
+ . = ALIGN(256);
+ .init.ramfs : {
+ __initramfs_start = .;
+ *(.init.initramfs)
+ . = ALIGN(2);
+ __initramfs_end = .;
+ }
#endif
- PERCPU(4096)
- . = ALIGN(4096);
- __init_end = .;
- /* freed after init ends here */
-
- __bss_start = .; /* BSS */
- .bss : { *(.bss) }
- . = ALIGN(2);
- __bss_stop = .;
-
- _end = . ;
-
- /* Sections to be discarded */
- /DISCARD/ : {
- *(.exit.data) *(.exitcall.exit)
- }
-
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
+
+ PERCPU(4096)
+ . = ALIGN(4096);
+ __init_end = .; /* freed after init ends here */
+
+ /* BSS */
+ .bss : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(2);
+ __bss_stop = .;
+ }
+
+ _end = . ;
+
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.exit.data)
+ *(.exitcall.exit)
+ }
+
+ /* Debugging sections. */
+ STABS_DEBUG
+ DWARF_DEBUG
}
next prev parent reply other threads:[~2007-10-04 19:15 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-04 11:27 [patch 00/34] s390 patches for 2.6.24 Martin Schwidefsky
2007-10-04 11:27 ` [patch 01/34] cio: rename css to channel_subsystems Martin Schwidefsky
2007-10-04 11:27 ` [patch 02/34] cio: remove subchannel_add_files() Martin Schwidefsky
2007-10-04 11:27 ` [patch 03/34] cio: Fix some coding style issues in cmf Martin Schwidefsky
2007-10-04 11:27 ` [patch 04/34] cio: Kerneldoc comments for cmf Martin Schwidefsky
2007-10-04 11:27 ` [patch 05/34] cio: Add docbook comments Martin Schwidefsky
2007-10-04 11:27 ` [patch 06/34] cio: Add s390-drivers book Martin Schwidefsky
2007-10-04 11:27 ` [patch 07/34] cio: Minor style fixes Martin Schwidefsky
2007-10-04 11:27 ` [patch 08/34] cio: Disable channel path measurements on shutdown/reboot Martin Schwidefsky
2007-10-04 11:27 ` [patch 09/34] cio: Introduce ccw_bus_type.shutdown Martin Schwidefsky
2007-10-04 11:27 ` [patch 10/34] cio: Disable channel measurements (cmf) on shutdown/reboot Martin Schwidefsky
2007-10-04 11:27 ` [patch 11/34] cio: Fix device attributes for early devices Martin Schwidefsky
2007-10-04 11:27 ` [patch 12/34] Add Documentation/s390/00-INDEX Martin Schwidefsky
2007-10-04 11:27 ` [patch 13/34] cio: Documentation update Martin Schwidefsky
2007-10-04 11:27 ` [patch 14/34] zcrypt: make init/exit functions static Martin Schwidefsky
2007-10-04 11:27 ` [patch 15/34] zcrypt: remove duplicated struct CPRBX definition Martin Schwidefsky
2007-10-04 11:27 ` [patch 16/34] zcrypt: fix ap_reset_domain() Martin Schwidefsky
2007-10-04 11:27 ` [patch 17/34] appldata_base: Misc cpuinit annotations and bugfix Martin Schwidefsky
2007-10-04 11:27 ` [patch 18/34] appldata_base: Remove module_exit function and modular stuff Martin Schwidefsky
2007-10-04 11:27 ` [patch 19/34] disassembler: fix output for insns with 6 operands Martin Schwidefsky
2007-10-04 11:27 ` [patch 20/34] disassembler: Remove redundant variable assignment Martin Schwidefsky
2007-10-04 11:27 ` [patch 21/34] Get rid of a bunch of sparse warnings again Martin Schwidefsky
2007-10-04 11:27 ` [patch 22/34] remove packed attribute from ext_int_info_t Martin Schwidefsky
2007-10-04 11:27 ` [patch 23/34] Get rid of ARCH_KMALLOC_MINALIGN Martin Schwidefsky
2007-10-04 11:27 ` [patch 24/34] qdio: dont cast function pointers and use them to call functions Martin Schwidefsky
2007-10-04 11:27 ` [patch 25/34] is_power_of_2 in drivers/s390/block/dasd_int.h Martin Schwidefsky
2007-10-04 11:27 ` [patch 26/34] qdio: change QDIO performance_stats error message priority Martin Schwidefsky
2007-10-04 11:27 ` [patch 27/34] Force link error if xchg/cmpxchg gets called with unsupported size Martin Schwidefsky
2007-10-04 11:27 ` [patch 28/34] Use IPL CLEAR for reipl under z/VM Martin Schwidefsky
2007-10-04 11:27 ` [patch 29/34] Remove obsolete recommendation for 8M ramdisk size Martin Schwidefsky
2007-10-04 11:27 ` [patch 30/34] zcore: fix inline assembly in memcpy_real() Martin Schwidefsky
2007-10-04 11:27 ` [patch 31/34] Make vmalloc area start at address > 4GB Martin Schwidefsky
2007-10-04 11:27 ` [patch 32/34] cpcmd: fix inline assembly usage Martin Schwidefsky
2007-10-04 11:27 ` [patch 33/34] tape: Fix medium state handling Martin Schwidefsky
2007-10-04 11:27 ` [patch 34/34] vmwatchdog: fix broken inline assembly Martin Schwidefsky
2007-10-04 19:10 ` [patch 00/34] s390 patches for 2.6.24 Sam Ravnborg
2007-10-05 8:30 ` Martin Schwidefsky
2007-10-04 19:15 ` Sam Ravnborg [this message]
2007-10-04 19:18 ` [PATCH 2/2] s390: use PAGE_SIZE in vmlinux.lds Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071004191510.GB23211@uranus.ravnborg.org \
--to=sam@ravnborg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=schwidefsky@de.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox