[PATCH] s390/fault: use wake_up_klogd() in bust_spinlocks()

[Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>]

printk() without oops_in_progress set is potentially dangerous.
it will attempt to call into console driver, so if oops happened
while console driver port->lock spin_lock was locked on the same
CPU (NMI oops or oops from console driver), then re-entering
console driver from bust_spinlocks() will deadlock the system.

Some serial drivers have are re-entrant from oops path:

static void serial_console_write(struct console *co, const char *s,
                                 unsigned count)
{
...
        if (port->sysrq)
                locked = 0;
        else if (oops_in_progress)
                locked = spin_trylock_irqsave(&port->lock, flags);
        else
                spin_lock_irqsave(&port->lock, flags);
...

        uart_console_write(port, s, count, serial_console_putchar);
...
        if (locked)
                spin_unlock_irqrestore(&port->lock, flags);
}

So it's OK to call printk() or console_unblank() and re-enter
serial console drivers when oops_in_progress set. But once we
clear oops_in_progress serial consoles become non-reentrant.

From the comment it seems that s390 wants to just poke klogd.
There is wake_up_klogd() for this purpose, so we can replace
that printk(" ").

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
---
 arch/s390/mm/fault.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 2b8f32f56e0c..244993dc3c70 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -93,15 +93,10 @@ void bust_spinlocks(int yes)
 	} else {
 		int loglevel_save = console_loglevel;
 		console_unblank();
-		oops_in_progress = 0;
-		/*
-		 * OK, the message is on the console.  Now we call printk()
-		 * without oops_in_progress set so that printk will give klogd
-		 * a poke.  Hold onto your hats...
-		 */
-		console_loglevel = 15;
-		printk(" ");
 		console_loglevel = loglevel_save;
+
+		oops_in_progress = 0;
+		wake_up_klogd();
 	}
 }
 
-- 
2.19.1