From: Janosch Frank <frankja@linux.ibm.com>
To: kvm@vger.kernel.org
Cc: linux-s390@vger.kernel.org, david@redhat.com, thuth@redhat.com
Subject: [kvm-unit-tests PATCH 6/6] s390x: SMP test
Date: Thu, 29 Aug 2019 14:14:59 +0200 [thread overview]
Message-ID: <20190829121459.1708-7-frankja@linux.ibm.com> (raw)
In-Reply-To: <20190829121459.1708-1-frankja@linux.ibm.com>
Testing SIGP emulation for the following order codes:
* start
* stop
* restart
* set prefix
* store status
* stop and store status
* reset
* initial reset
* external call
* emegergency call
restart and set prefix are part of the library and needed to start
other cpus.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
---
s390x/Makefile | 1 +
s390x/smp.c | 242 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 243 insertions(+)
create mode 100644 s390x/smp.c
diff --git a/s390x/Makefile b/s390x/Makefile
index d83dd0b..3744372 100644
--- a/s390x/Makefile
+++ b/s390x/Makefile
@@ -15,6 +15,7 @@ tests += $(TEST_DIR)/cpumodel.elf
tests += $(TEST_DIR)/diag288.elf
tests += $(TEST_DIR)/stsi.elf
tests += $(TEST_DIR)/skrf.elf
+tests += $(TEST_DIR)/smp.elf
tests_binary = $(patsubst %.elf,%.bin,$(tests))
all: directories test_cases test_cases_binary
diff --git a/s390x/smp.c b/s390x/smp.c
new file mode 100644
index 0000000..9363cd2
--- /dev/null
+++ b/s390x/smp.c
@@ -0,0 +1,242 @@
+/*
+ * Tests sigp emulation
+ *
+ * Copyright 2019 IBM Corp.
+ *
+ * Authors:
+ * Janosch Frank <frankja@linux.ibm.com>
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2.
+ */
+#include <libcflat.h>
+#include <asm/asm-offsets.h>
+#include <asm/interrupt.h>
+#include <asm/page.h>
+#include <asm/facility.h>
+#include <asm-generic/barrier.h>
+#include <asm/sigp.h>
+
+#include <smp.h>
+#include <alloc_page.h>
+
+static int t = 0;
+
+static void cpu_loop(void)
+{
+ for (;;) {}
+}
+
+static void test_func(void)
+{
+ t = 1;
+ cpu_loop();
+}
+
+static void test_start(void)
+{
+ struct psw psw;
+ psw.mask = extract_psw_mask();
+ psw.addr = (unsigned long)test_func;
+
+ smp_cpu_setup(1, psw);
+ while (!t) {
+ mb();
+ }
+ report("start", 1);
+}
+
+static void test_stop(void)
+{
+ int i = 0;
+
+ smp_cpu_stop(1);
+ /*
+ * The smp library waits for the CPU to shut down, but let's
+ * also do it here, so we don't rely on the library
+ * implementation
+ */
+ while (!smp_cpu_stopped(1)) {}
+ t = 0;
+ /* Let's leave some time for cpu #2 to change t */
+ for (; i < 0x100000; i++) {}
+ report("stop", !t);
+}
+
+static void test_stop_store_status(void)
+{
+ struct cpu *cpu = smp_cpu_from_addr(1);
+ struct lowcore *lc = (void *)0x0;
+
+ smp_cpu_stop_store_status(1);
+ mb();
+ report("stop store status",
+ lc->prefix_sa == (uint32_t)(uintptr_t)cpu->lowcore);
+}
+
+static void test_store_status(void)
+{
+ struct cpu_status *status = alloc_pages(0);
+ uint32_t r;
+
+ report_prefix_push("status");
+ memset(status, 0, PAGE_SIZE);
+
+ smp_cpu_restart(1);
+ sigp(1, SIGP_STORE_STATUS_AT_ADDRESS, (uintptr_t)status, &r);
+ report("not stopped", r == SIGP_STATUS_INCORRECT_STATE);
+
+ memset(status, 0, PAGE_SIZE);
+ smp_cpu_stop(1);
+ sigp(1, SIGP_STORE_STATUS_AT_ADDRESS, (uintptr_t)status, NULL);
+ while (!status->prefix) {}
+ report("store status", 1);
+ free_pages(status, PAGE_SIZE);
+ report_prefix_pop();
+}
+
+static void ecall(void)
+{
+ unsigned long mask;
+ struct lowcore *lc = (void *)0x0;
+
+ ctl_set_bit(0, 13);
+ mask = extract_psw_mask();
+ mask |= PSW_MASK_EXT;
+ load_psw_mask(mask);
+ expect_ext_int();
+ t = 1;
+ while (lc->ext_int_code != 0x1202) {mb();}
+ report("ecall", 1);
+ t = 1;
+}
+
+static void test_ecall(void)
+{
+ struct psw psw;
+ psw.mask = extract_psw_mask();
+ psw.addr = (unsigned long)ecall;
+
+ report_prefix_push("ecall");
+ t = 0;
+ smp_cpu_destroy(1);
+
+ mb();
+ smp_cpu_setup(1, psw);
+ while (!t) {
+ mb();
+ }
+ t = 0;
+ sigp(1, SIGP_EXTERNAL_CALL, 0, NULL);
+ while(!t) {mb();}
+ smp_cpu_stop(1);
+ report_prefix_pop();
+}
+
+static void emcall(void)
+{
+ unsigned long mask;
+ struct lowcore *lc = (void *)0x0;
+
+ ctl_set_bit(0, 14);
+ mask = extract_psw_mask();
+ mask |= PSW_MASK_EXT;
+ load_psw_mask(mask);
+ expect_ext_int();
+ t = 1;
+ while (lc->ext_int_code != 0x1201) {mb();}
+ report("ecall", 1);
+ t = 1;
+}
+
+static void test_emcall(void)
+{
+ struct psw psw;
+ psw.mask = extract_psw_mask();
+ psw.addr = (unsigned long)emcall;
+
+ report_prefix_push("emcall");
+ t = 0;
+ smp_cpu_destroy(1);
+
+ mb();
+ smp_cpu_setup(1, psw);
+ while (!t) {
+ mb();
+ }
+ t = 0;
+ sigp(1, SIGP_EMERGENCY_SIGNAL, 0, NULL);
+ while(!t) {mb();}
+ smp_cpu_stop(1);
+ report_prefix_pop();
+}
+
+static void test_reset_initial(void)
+{
+ struct cpu_status *status = alloc_pages(0);
+ struct psw psw;
+
+ psw.mask = extract_psw_mask();
+ psw.addr = (unsigned long)test_func;
+
+ report_prefix_push("reset initial");
+ smp_cpu_setup(1, psw);
+
+ sigp_retry(1, SIGP_INITIAL_CPU_RESET, 0, NULL);
+ sigp(1, SIGP_STORE_STATUS_AT_ADDRESS, (uintptr_t)status, NULL);
+
+ report_prefix_push("clear");
+ report("psw", !status->psw.mask && !status->psw.addr);
+ report("prefix", !status->prefix);
+ report("fpc", !status->fpc);
+ report("cpu timer", !status->cputm);
+ report("todpr", !status->todpr);
+ report_prefix_pop();
+
+ report_prefix_push("initialized");
+ report("cr0 == 0xE0", status->crs[0] == 0xE0UL);
+ report("cr14 == 0xC2000000", status->crs[14] == 0xC2000000UL);
+ report_prefix_pop();
+
+ report("cpu stopped", smp_cpu_stopped(1));
+ free_pages(status, PAGE_SIZE);
+ report_prefix_pop();
+}
+
+static void test_reset(void)
+{
+ struct psw psw;
+
+ psw.mask = extract_psw_mask();
+ psw.addr = (unsigned long)test_func;
+
+ report_prefix_push("cpu reset");
+ smp_cpu_setup(1, psw);
+
+ sigp_retry(1, SIGP_CPU_RESET, 0, NULL);
+ report("cpu stopped", smp_cpu_stopped(1));
+ report_prefix_pop();
+}
+
+int main(void)
+{
+ report_prefix_push("smp");
+
+ if (smp_query_num_cpus() == 1) {
+ report_abort("need at least 2 cpus for this test");
+ goto done;
+ }
+
+ test_start();
+ test_stop();
+ test_stop_store_status();
+ test_store_status();
+ test_ecall();
+ test_emcall();
+ test_reset();
+ test_reset_initial();
+
+done:
+ report_prefix_pop();
+ return report_summary();
+}
--
2.17.0
next prev parent reply other threads:[~2019-08-29 12:15 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-29 12:14 [kvm-unit-tests PATCH 0/6] s390x: Add multiboot and smp Janosch Frank
2019-08-29 12:14 ` [kvm-unit-tests PATCH 1/6] s390x: Use interrupts in SCLP and add locking Janosch Frank
2019-08-30 12:21 ` David Hildenbrand
2019-09-02 11:42 ` Thomas Huth
2019-09-03 7:53 ` Janosch Frank
2019-09-03 8:52 ` David Hildenbrand
2019-08-29 12:14 ` [kvm-unit-tests PATCH 2/6] s390x: Add linemode console Janosch Frank
2019-09-02 11:59 ` Thomas Huth
2019-08-29 12:14 ` [kvm-unit-tests PATCH 3/6] s390x: Add linemode buffer to fix newline on every print Janosch Frank
2019-08-29 12:14 ` [kvm-unit-tests PATCH 4/6] s390x: Add initial smp code Janosch Frank
2019-09-02 13:21 ` Thomas Huth
2019-09-03 8:10 ` Janosch Frank
2019-08-29 12:14 ` [kvm-unit-tests PATCH 5/6] s390x: Prepare for external calls Janosch Frank
2019-09-02 13:58 ` Thomas Huth
2019-09-02 14:17 ` Janosch Frank
2019-08-29 12:14 ` Janosch Frank [this message]
2019-09-02 15:40 ` [kvm-unit-tests PATCH 6/6] s390x: SMP test Thomas Huth
2019-09-03 8:44 ` Janosch Frank
2019-09-03 8:56 ` Thomas Huth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190829121459.1708-7-frankja@linux.ibm.com \
--to=frankja@linux.ibm.com \
--cc=david@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox