From: Stefan Haberland <sth@linux.ibm.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org,
Jan Hoeppner <hoeppner@linux.ibm.com>,
linux-s390@vger.kernel.org, Heiko Carstens <hca@linux.ibm.com>,
Vasily Gorbik <gor@linux.ibm.com>,
Christian Borntraeger <borntraeger@de.ibm.com>
Subject: [PATCH 1/1] s390/dasd: fix command reject error on ESE devices
Date: Fri, 19 May 2023 12:23:40 +0200 [thread overview]
Message-ID: <20230519102340.3854819-2-sth@linux.ibm.com> (raw)
In-Reply-To: <20230519102340.3854819-1-sth@linux.ibm.com>
Formatting a thin-provisioned (ESE) device that is part of a PPRC copy
relation might fail with the following error:
dasd-eckd 0.0.f500: An error occurred in the DASD device driver, reason=09
[...]
24 Byte: 0 MSG 4, no MSGb to SYSOP
During format of an ESE disk the Release Allocated Space command is used.
A bit in the payload of the command is set that is not allowed to be set
for devices in a copy relation. This bit is set to allow the partial
release of an extent.
Check for the existence of a copy relation before setting the respective
bit.
Fixes: 91dc4a197569 ("s390/dasd: Add new ioctl to release space")
Cc: stable@kernel.org # 5.3+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
---
drivers/s390/block/dasd_eckd.c | 33 +++++++++++++++++++++++++++++++--
1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index ade1369fe5ed..113c509bf6d0 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -127,6 +127,8 @@ static int prepare_itcw(struct itcw *, unsigned int, unsigned int, int,
struct dasd_device *, struct dasd_device *,
unsigned int, int, unsigned int, unsigned int,
unsigned int, unsigned int);
+static int dasd_eckd_query_pprc_status(struct dasd_device *,
+ struct dasd_pprc_data_sc4 *);
/* initial attempt at a probe function. this can be simplified once
* the other detection code is gone */
@@ -3733,6 +3735,26 @@ static int count_exts(unsigned int from, unsigned int to, int trks_per_ext)
return count;
}
+static int dasd_in_copy_relation(struct dasd_device *device)
+{
+ struct dasd_pprc_data_sc4 *temp;
+ int rc;
+
+ if (!dasd_eckd_pprc_enabled(device))
+ return 0;
+
+ temp = kzalloc(sizeof(*temp), GFP_KERNEL);
+ if (!temp)
+ return -ENOMEM;
+
+ rc = dasd_eckd_query_pprc_status(device, temp);
+ if (!rc)
+ rc = temp->dev_info[0].state;
+
+ kfree(temp);
+ return rc;
+}
+
/*
* Release allocated space for a given range or an entire volume.
*/
@@ -3749,6 +3771,7 @@ dasd_eckd_dso_ras(struct dasd_device *device, struct dasd_block *block,
int cur_to_trk, cur_from_trk;
struct dasd_ccw_req *cqr;
u32 beg_cyl, end_cyl;
+ int copy_relation;
struct ccw1 *ccw;
int trks_per_ext;
size_t ras_size;
@@ -3760,6 +3783,10 @@ dasd_eckd_dso_ras(struct dasd_device *device, struct dasd_block *block,
if (dasd_eckd_ras_sanity_checks(device, first_trk, last_trk))
return ERR_PTR(-EINVAL);
+ copy_relation = dasd_in_copy_relation(device);
+ if (copy_relation < 0)
+ return ERR_PTR(copy_relation);
+
rq = req ? blk_mq_rq_to_pdu(req) : NULL;
features = &private->features;
@@ -3788,9 +3815,11 @@ dasd_eckd_dso_ras(struct dasd_device *device, struct dasd_block *block,
/*
* This bit guarantees initialisation of tracks within an extent that is
* not fully specified, but is only supported with a certain feature
- * subset.
+ * subset and for devices not in a copy relation.
*/
- ras_data->op_flags.guarantee_init = !!(features->feature[56] & 0x01);
+ if (features->feature[56] & 0x01 && !copy_relation)
+ ras_data->op_flags.guarantee_init = 1;
+
ras_data->lss = private->conf.ned->ID;
ras_data->dev_addr = private->conf.ned->unit_addr;
ras_data->nr_exts = nr_exts;
--
2.39.2
next prev parent reply other threads:[~2023-05-19 10:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-19 10:23 [PATCH 0/1] s390/dasd: fix command reject error on ESE devices Stefan Haberland
2023-05-19 10:23 ` Stefan Haberland [this message]
2023-05-20 2:04 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230519102340.3854819-2-sth@linux.ibm.com \
--to=sth@linux.ibm.com \
--cc=axboe@kernel.dk \
--cc=borntraeger@de.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=hoeppner@linux.ibm.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox