From: Alexandra Winter <wintera@linux.ibm.com>
To: David Miller <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>
Cc: netdev@vger.kernel.org, linux-s390@vger.kernel.org,
Heiko Carstens <hca@linux.ibm.com>,
Alexandra Winter <wintera@linux.ibm.com>,
Wenjia Zhang <wenjia@linux.ibm.com>
Subject: [PATCH net] s390/qeth: Don't call dev_close/dev_open (DOWN/UP)
Date: Tue, 1 Aug 2023 10:00:16 +0200 [thread overview]
Message-ID: <20230801080016.744474-1-wintera@linux.ibm.com> (raw)
dev_close() and dev_open() are issued to change the interface state to DOWN
or UP (dev->flags IFF_UP). When the netdev is set DOWN it loses e.g its
Ipv6 addresses and routes. We don't want this in cases of device recovery
(triggered by hardware or software) or when the qeth device is set
offline.
Setting a qeth device offline or online and device recovery actions call
netif_device_detach() and/or netif_device_attach(). That will reset or
set the LOWER_UP indication i.e. change the dev->state Bit
__LINK_STATE_PRESENT. That is enough to e.g. cause bond failovers, and
still preserves the interface settings that are handled by the network
stack.
Don't call dev_open() nor dev_close() from the qeth device driver. Let the
network stack handle this.
Fixes: d4560150cb47 ("s390/qeth: call dev_close() during recovery")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
---
drivers/s390/net/qeth_core.h | 1 -
drivers/s390/net/qeth_core_main.c | 2 --
drivers/s390/net/qeth_l2_main.c | 9 ++++++---
drivers/s390/net/qeth_l3_main.c | 8 +++++---
4 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 1d195429753d..613eab729704 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -716,7 +716,6 @@ struct qeth_card_info {
u16 chid;
u8 ids_valid:1; /* cssid,iid,chid */
u8 dev_addr_is_registered:1;
- u8 open_when_online:1;
u8 promisc_mode:1;
u8 use_v1_blkt:1;
u8 is_vm_nic:1;
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 1d5b207c2b9e..cd783290bde5 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -5373,8 +5373,6 @@ int qeth_set_offline(struct qeth_card *card, const struct qeth_discipline *disc,
qeth_clear_ipacmd_list(card);
rtnl_lock();
- card->info.open_when_online = card->dev->flags & IFF_UP;
- dev_close(card->dev);
netif_device_detach(card->dev);
netif_carrier_off(card->dev);
rtnl_unlock();
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 9f13ed170a43..75910c0bcc2b 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -2388,9 +2388,12 @@ static int qeth_l2_set_online(struct qeth_card *card, bool carrier_ok)
qeth_enable_hw_features(dev);
qeth_l2_enable_brport_features(card);
- if (card->info.open_when_online) {
- card->info.open_when_online = 0;
- dev_open(dev, NULL);
+ if (netif_running(dev)) {
+ local_bh_disable();
+ napi_schedule(&card->napi);
+ /* kick-start the NAPI softirq: */
+ local_bh_enable();
+ qeth_l2_set_rx_mode(dev);
}
rtnl_unlock();
}
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index af4e60d2917e..b92a32b4b114 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2018,9 +2018,11 @@ static int qeth_l3_set_online(struct qeth_card *card, bool carrier_ok)
netif_device_attach(dev);
qeth_enable_hw_features(dev);
- if (card->info.open_when_online) {
- card->info.open_when_online = 0;
- dev_open(dev, NULL);
+ if (netif_running(dev)) {
+ local_bh_disable();
+ napi_schedule(&card->napi);
+ /* kick-start the NAPI softirq: */
+ local_bh_enable();
}
rtnl_unlock();
}
--
2.39.2
next reply other threads:[~2023-08-01 8:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-01 8:00 Alexandra Winter [this message]
2023-08-02 9:20 ` [PATCH net] s390/qeth: Don't call dev_close/dev_open (DOWN/UP) patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230801080016.744474-1-wintera@linux.ibm.com \
--to=wintera@linux.ibm.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hca@linux.ibm.com \
--cc=kuba@kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=wenjia@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox