From: Stefan Haberland <sth@linux.ibm.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org,
Jan Hoeppner <hoeppner@linux.ibm.com>,
linux-s390@vger.kernel.org, Heiko Carstens <hca@linux.ibm.com>,
Vasily Gorbik <gor@linux.ibm.com>,
Christian Borntraeger <borntraeger@de.ibm.com>,
Miroslav Franc <mfranc@suse.cz>
Subject: [PATCH RESEND 09/11] s390/dasd: Use dev_*() for device log messages
Date: Thu, 8 Feb 2024 17:42:48 +0100 [thread overview]
Message-ID: <20240208164248.540985-10-sth@linux.ibm.com> (raw)
In-Reply-To: <20240208164248.540985-1-sth@linux.ibm.com>
From: Jan Höppner <hoeppner@linux.ibm.com>
All log messages in dasd.c use the printk variants of pr_*(). They all
add the name of the affected device manually to the log message.
This can be simplified by using the dev_*() variants of printk, which
include the device information and make a separate call to dev_name()
unnecessary.
The KMSG_COMPONENT and the pr_fmt() definition can be dropped. Note that
this removes the "dasd: " prefix from the one pr_info() call in
dasd_init(). However, the log message already provides all relevant
information.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
---
drivers/s390/block/dasd.c | 50 +++++++++++++++++++--------------------
1 file changed, 24 insertions(+), 26 deletions(-)
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index d79e54279158..fdb6cb8d8abf 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -8,9 +8,6 @@
* Copyright IBM Corp. 1999, 2009
*/
-#define KMSG_COMPONENT "dasd"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
#include <linux/kmod.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -3381,8 +3378,7 @@ static void dasd_generic_auto_online(void *data, async_cookie_t cookie)
ret = ccw_device_set_online(cdev);
if (ret)
- pr_warn("%s: Setting the DASD online failed with rc=%d\n",
- dev_name(&cdev->dev), ret);
+ dev_warn(&cdev->dev, "Setting the DASD online failed with rc=%d\n", ret);
}
/*
@@ -3469,8 +3465,11 @@ int dasd_generic_set_online(struct ccw_device *cdev,
{
struct dasd_discipline *discipline;
struct dasd_device *device;
+ struct device *dev;
int rc;
+ dev = &cdev->dev;
+
/* first online clears initial online feature flag */
dasd_set_feature(cdev, DASD_FEATURE_INITIAL_ONLINE, 0);
device = dasd_create_device(cdev);
@@ -3483,11 +3482,10 @@ int dasd_generic_set_online(struct ccw_device *cdev,
/* Try to load the required module. */
rc = request_module(DASD_DIAG_MOD);
if (rc) {
- pr_warn("%s Setting the DASD online failed "
- "because the required module %s "
- "could not be loaded (rc=%d)\n",
- dev_name(&cdev->dev), DASD_DIAG_MOD,
- rc);
+ dev_warn(dev, "Setting the DASD online failed "
+ "because the required module %s "
+ "could not be loaded (rc=%d)\n",
+ DASD_DIAG_MOD, rc);
dasd_delete_device(device);
return -ENODEV;
}
@@ -3495,8 +3493,7 @@ int dasd_generic_set_online(struct ccw_device *cdev,
/* Module init could have failed, so check again here after
* request_module(). */
if (!dasd_diag_discipline_pointer) {
- pr_warn("%s Setting the DASD online failed because of missing DIAG discipline\n",
- dev_name(&cdev->dev));
+ dev_warn(dev, "Setting the DASD online failed because of missing DIAG discipline\n");
dasd_delete_device(device);
return -ENODEV;
}
@@ -3517,8 +3514,8 @@ int dasd_generic_set_online(struct ccw_device *cdev,
/* check_device will allocate block device if necessary */
rc = discipline->check_device(device);
if (rc) {
- pr_warn("%s Setting the DASD online with discipline %s failed with rc=%i\n",
- dev_name(&cdev->dev), discipline->name, rc);
+ dev_warn(dev, "Setting the DASD online with discipline %s failed with rc=%i\n",
+ discipline->name, rc);
module_put(discipline->owner);
module_put(base_discipline->owner);
dasd_delete_device(device);
@@ -3527,16 +3524,15 @@ int dasd_generic_set_online(struct ccw_device *cdev,
dasd_set_target_state(device, DASD_STATE_ONLINE);
if (device->state <= DASD_STATE_KNOWN) {
- pr_warn("%s Setting the DASD online failed because of a missing discipline\n",
- dev_name(&cdev->dev));
+ dev_warn(dev, "Setting the DASD online failed because of a missing discipline\n");
rc = -ENODEV;
dasd_set_target_state(device, DASD_STATE_NEW);
if (device->block)
dasd_free_block(device->block);
dasd_delete_device(device);
- } else
- pr_debug("dasd_generic device %s found\n",
- dev_name(&cdev->dev));
+ } else {
+ dev_dbg(dev, "dasd_generic device found\n");
+ }
wait_event(dasd_init_waitq, _wait_for_device(device));
@@ -3547,10 +3543,13 @@ EXPORT_SYMBOL_GPL(dasd_generic_set_online);
int dasd_generic_set_offline(struct ccw_device *cdev)
{
+ int max_count, open_count, rc;
struct dasd_device *device;
struct dasd_block *block;
- int max_count, open_count, rc;
unsigned long flags;
+ struct device *dev;
+
+ dev = &cdev->dev;
rc = 0;
spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
@@ -3571,11 +3570,10 @@ int dasd_generic_set_offline(struct ccw_device *cdev)
open_count = atomic_read(&device->block->open_count);
if (open_count > max_count) {
if (open_count > 0)
- pr_warn("%s: The DASD cannot be set offline with open count %i\n",
- dev_name(&cdev->dev), open_count);
+ dev_warn(dev, "The DASD cannot be set offline with open count %i\n",
+ open_count);
else
- pr_warn("%s: The DASD cannot be set offline while it is in use\n",
- dev_name(&cdev->dev));
+ dev_warn(dev, "The DASD cannot be set offline while it is in use\n");
rc = -EBUSY;
goto out_err;
}
@@ -3935,8 +3933,8 @@ static int dasd_handle_autoquiesce(struct dasd_device *device,
if (dasd_eer_enabled(device))
dasd_eer_write(device, NULL, DASD_EER_AUTOQUIESCE);
- pr_info("%s: The DASD has been put in the quiesce state\n",
- dev_name(&device->cdev->dev));
+ dev_info(&device->cdev->dev,
+ "The DASD has been put in the quiesce state\n");
dasd_device_set_stop_bits(device, DASD_STOPPED_QUIESCE);
if (device->features & DASD_FEATURE_REQUEUEQUIESCE)
--
2.40.1
next prev parent reply other threads:[~2024-02-08 16:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-08 16:42 [PATCH RESEND 00/11] s390/dasd: string handling cleanups Stefan Haberland
2024-02-08 16:42 ` [PATCH RESEND 01/11] s390/dasd: Simplify uid string generation Stefan Haberland
2024-02-08 16:42 ` [PATCH RESEND 02/11] s390/dasd: Use sysfs_emit() over sprintf() Stefan Haberland
2024-02-08 16:42 ` [PATCH RESEND 03/11] s390/dasd: Remove unnecessary errorstring generation Stefan Haberland
2024-02-08 16:42 ` [PATCH RESEND 04/11] s390/dasd: Move allocation error message to DBF Stefan Haberland
2024-02-08 16:42 ` [PATCH RESEND 05/11] s390/dasd: Remove unused message logging macros Stefan Haberland
2024-02-08 16:42 ` [PATCH RESEND 06/11] s390/dasd: Use dev_err() over printk() Stefan Haberland
2024-02-08 16:42 ` [PATCH RESEND 07/11] s390/dasd: Remove %p format specifier from error messages Stefan Haberland
2024-02-08 16:42 ` [PATCH RESEND 08/11] s390/dasd: Remove PRINTK_HEADER and KMSG_COMPONENT definitions Stefan Haberland
2024-02-08 16:42 ` Stefan Haberland [this message]
2024-02-08 17:12 ` [PATCH RESEND 00/11] s390/dasd: string handling cleanups Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240208164248.540985-10-sth@linux.ibm.com \
--to=sth@linux.ibm.com \
--cc=axboe@kernel.dk \
--cc=borntraeger@de.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=hoeppner@linux.ibm.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mfranc@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox