From: Harald Freudenberger <freude@linux.ibm.com>
To: dengler@linux.ibm.com, ifranzki@linux.ibm.com,
fcallies@linux.ibm.com, hca@linux.ibm.com, gor@linux.ibm.com,
agordeev@linux.ibm.com, seiden@linux.ibm.com,
borntraeger@linux.ibm.com, frankja@linux.ibm.com,
imbrenda@linux.ibm.com
Cc: linux-s390@vger.kernel.org, herbert@gondor.apana.org.au
Subject: [PATCH v4 24/24] s390/pkey/crypto: Introduce xflags param for pkey in-kernel API
Date: Wed, 9 Apr 2025 16:03:05 +0200 [thread overview]
Message-ID: <20250409140305.58900-25-freude@linux.ibm.com> (raw)
In-Reply-To: <20250409140305.58900-1-freude@linux.ibm.com>
Add a new parameter xflags to the in-kernel API function
pkey_key2protkey(). Currently there is only one flag supported:
* PKEY_XFLAG_NOMEMALLOC:
If this flag is given in the xflags parameter, the pkey
implementation is not allowed to allocate memory but instead should
fall back to use preallocated memory or simple fail with -ENOMEM.
This flag is for protected key derive within a cipher or similar
which must not allocate memory which would cause io operations - see
also the CRYPTO_ALG_ALLOCATES_MEMORY flag in crypto.h.
The one and only user of this in-kernel API - the skcipher
implementations PAES in paes_s390.c set this flag upon request
to derive a protected key from the given raw key material.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
---
arch/s390/crypto/paes_s390.c | 6 +++---
arch/s390/include/asm/pkey.h | 15 ++++++++++++++-
drivers/s390/crypto/pkey_api.c | 11 +++++++----
3 files changed, 24 insertions(+), 8 deletions(-)
diff --git a/arch/s390/crypto/paes_s390.c b/arch/s390/crypto/paes_s390.c
index 511093713a6f..1f62a9460405 100644
--- a/arch/s390/crypto/paes_s390.c
+++ b/arch/s390/crypto/paes_s390.c
@@ -182,14 +182,14 @@ static inline int __paes_keyblob2pkey(const u8 *key, unsigned int keylen,
{
int i, rc = -EIO;
- /* try three times in case of busy card */
+ /* try three times in case of busy card or no mem */
for (i = 0; rc && i < 3; i++) {
- if (rc == -EBUSY && in_task()) {
+ if ((rc == -EBUSY || rc == -ENOMEM) && in_task()) {
if (msleep_interruptible(1000))
return -EINTR;
}
rc = pkey_key2protkey(key, keylen, pk->protkey, &pk->len,
- &pk->type);
+ &pk->type, PKEY_XFLAG_NOMEMALLOC);
}
return rc;
diff --git a/arch/s390/include/asm/pkey.h b/arch/s390/include/asm/pkey.h
index 5dca1a46a9f6..c0e7f8c25e9f 100644
--- a/arch/s390/include/asm/pkey.h
+++ b/arch/s390/include/asm/pkey.h
@@ -20,9 +20,22 @@
* @param key pointer to a buffer containing the key blob
* @param keylen size of the key blob in bytes
* @param protkey pointer to buffer receiving the protected key
+ * @param xflags additional execution flags (see PKEY_XFLAG_* definitions below)
+ * As of now the only supported flag is PKEY_XFLAG_NOMEMALLOC.
* @return 0 on success, negative errno value on failure
*/
int pkey_key2protkey(const u8 *key, u32 keylen,
- u8 *protkey, u32 *protkeylen, u32 *protkeytype);
+ u8 *protkey, u32 *protkeylen, u32 *protkeytype,
+ u32 xflags);
+
+/*
+ * If this flag is given in the xflags parameter, the pkey implementation
+ * is not allowed to allocate memory but instead should fall back to use
+ * preallocated memory or simple fail with -ENOMEM.
+ * This flag is for protected key derive within a cipher or similar
+ * which must not allocate memory which would cause io operations - see
+ * also the CRYPTO_ALG_ALLOCATES_MEMORY flag in crypto.h.
+ */
+#define PKEY_XFLAG_NOMEMALLOC 0x0001
#endif /* _KAPI_PKEY_H */
diff --git a/drivers/s390/crypto/pkey_api.c b/drivers/s390/crypto/pkey_api.c
index 55a4e70b866b..c46b57001550 100644
--- a/drivers/s390/crypto/pkey_api.c
+++ b/drivers/s390/crypto/pkey_api.c
@@ -53,17 +53,20 @@ static int key2protkey(const struct pkey_apqn *apqns, size_t nr_apqns,
* In-Kernel function: Transform a key blob (of any type) into a protected key
*/
int pkey_key2protkey(const u8 *key, u32 keylen,
- u8 *protkey, u32 *protkeylen, u32 *protkeytype)
+ u8 *protkey, u32 *protkeylen, u32 *protkeytype, u32 xflags)
{
+ u32 flags;
int rc;
- const u32 xflags = 0;
+
+ /* as of now only the NOMEMALLOC flag is supported */
+ flags = xflags & PKEY_XFLAG_NOMEMALLOC ? ZCRYPT_XFLAG_NOMEMALLOC : 0;
rc = key2protkey(NULL, 0, key, keylen,
- protkey, protkeylen, protkeytype, xflags);
+ protkey, protkeylen, protkeytype, flags);
if (rc == -ENODEV) {
pkey_handler_request_modules();
rc = key2protkey(NULL, 0, key, keylen,
- protkey, protkeylen, protkeytype, xflags);
+ protkey, protkeylen, protkeytype, flags);
}
return rc;
--
2.43.0
next prev parent reply other threads:[~2025-04-09 14:03 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-09 14:02 [PATCH v4 00/24] AP bus/zcrypt/pkey/paes no-mem-alloc patches Harald Freudenberger
2025-04-09 14:02 ` [PATCH v4 01/24] s390/ap: Move response_type struct into ap_msg struct Harald Freudenberger
2025-04-09 14:02 ` [PATCH v4 02/24] s390/ap/zcrypt: Rework AP message buffer allocation Harald Freudenberger
2025-04-09 14:02 ` [PATCH v4 03/24] s390/ap: Introduce ap message buffer pool Harald Freudenberger
2025-04-09 14:02 ` [PATCH v4 04/24] s390/zcrypt: Avoid alloc and copy of ep11 targets if kernelspace cprb Harald Freudenberger
2025-04-09 16:19 ` Holger Dengler
2025-04-09 14:02 ` [PATCH v4 05/24] s390/ap/zcrypt: New xflag parameter Harald Freudenberger
2025-04-09 16:25 ` Holger Dengler
2025-04-09 14:02 ` [PATCH v4 06/24] s390/zcrypt: Introduce cprb mempool for cca misc functions Harald Freudenberger
2025-04-11 12:40 ` Holger Dengler
2025-04-14 14:17 ` Harald Freudenberger
2025-04-09 14:02 ` [PATCH v4 07/24] s390/zcrypt: Introduce cprb mempool for ep11 " Harald Freudenberger
2025-04-11 12:58 ` Holger Dengler
2025-04-14 14:21 ` Harald Freudenberger
2025-04-09 14:02 ` [PATCH v4 08/24] s390/zcrypt: Rework zcrypt function zcrypt_device_status_mask_ext Harald Freudenberger
2025-04-09 14:02 ` [PATCH v4 09/24] s390/zcrypt: Introduce pre-allocated device status array for cca misc Harald Freudenberger
2025-04-11 13:06 ` Holger Dengler
2025-04-09 14:02 ` [PATCH v4 10/24] s390/zcrypt: Introduce pre-allocated device status array for ep11 misc Harald Freudenberger
2025-04-11 13:08 ` Holger Dengler
2025-04-09 14:02 ` [PATCH v4 11/24] s390/zcrypt: Remove unused functions from cca misc Harald Freudenberger
2025-04-11 13:10 ` Holger Dengler
2025-04-09 14:02 ` [PATCH v4 12/24] s390/zcrypt: Remove CCA and EP11 card and domain info caches Harald Freudenberger
2025-04-11 13:25 ` Holger Dengler
2025-04-14 14:39 ` Harald Freudenberger
2025-04-09 14:02 ` [PATCH v4 13/24] s390/zcrypt/pkey: Rework cca findcard() implementation and callers Harald Freudenberger
2025-04-11 14:16 ` Holger Dengler
2025-04-14 14:41 ` Harald Freudenberger
2025-04-09 14:02 ` [PATCH v4 14/24] s390/zcrypt/pkey: Rework ep11 " Harald Freudenberger
2025-04-11 14:18 ` Holger Dengler
2025-04-14 14:42 ` Harald Freudenberger
2025-04-09 14:02 ` [PATCH v4 15/24] s390/zcrypt: Rework cca misc functions kmallocs to use the cprb mempool Harald Freudenberger
2025-04-09 14:02 ` [PATCH v4 16/24] s390/zcrypt: Propagate xflags argument with cca_get_info() Harald Freudenberger
2025-04-11 14:25 ` Holger Dengler
2025-04-14 14:48 ` Harald Freudenberger
2025-04-14 15:04 ` Harald Freudenberger
2025-04-09 14:02 ` [PATCH v4 17/24] s390/zcrypt: Locate ep11_domain_query_info onto the stack instead of kmalloc Harald Freudenberger
2025-04-09 14:02 ` [PATCH v4 18/24] s390/zcrypt: Rework ep11 misc functions to use cprb mempool Harald Freudenberger
2025-04-09 14:03 ` [PATCH v4 19/24] s390/pkey: Rework CCA pkey handler to use stack for small memory allocs Harald Freudenberger
2025-04-09 14:03 ` [PATCH v4 20/24] s390/pkey: Rework EP11 " Harald Freudenberger
2025-04-09 14:03 ` [PATCH v4 21/24] s390/uv: Rename find_secret() to uv_find_secret() and publish Harald Freudenberger
2025-04-11 14:53 ` Holger Dengler
2025-04-14 8:08 ` Steffen Eiden
2025-04-14 15:15 ` Harald Freudenberger
2025-04-09 14:03 ` [PATCH v4 22/24] s390/pkey: Use preallocated memory for retrieve of UV secret metadata Harald Freudenberger
2025-04-11 15:24 ` Holger Dengler
2025-04-14 8:02 ` Steffen Eiden
2025-04-09 14:03 ` [PATCH v4 23/24] s390/zcrypt/pkey: Provide and pass xflags within pkey and zcrypt layers Harald Freudenberger
2025-04-11 14:36 ` Holger Dengler
2025-04-09 14:03 ` Harald Freudenberger [this message]
2025-04-14 13:34 ` [PATCH v4 24/24] s390/pkey/crypto: Introduce xflags param for pkey in-kernel API Holger Dengler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250409140305.58900-25-freude@linux.ibm.com \
--to=freude@linux.ibm.com \
--cc=agordeev@linux.ibm.com \
--cc=borntraeger@linux.ibm.com \
--cc=dengler@linux.ibm.com \
--cc=fcallies@linux.ibm.com \
--cc=frankja@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=herbert@gondor.apana.org.au \
--cc=ifranzki@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=linux-s390@vger.kernel.org \
--cc=seiden@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox