From: sashiko-bot@kernel.org
To: "Christian Borntraeger" <borntraeger@linux.ibm.com>
Cc: kvm@vger.kernel.org, "Alexander Gordeev" <agordeev@linux.ibm.com>,
linux-s390@vger.kernel.org, "Heiko Carstens" <hca@linux.ibm.com>,
"Vasily Gorbik" <gor@linux.ibm.com>
Subject: Re: [PATCH v2 2/7] KVM: s390: Zero initialize data structures for inject_pfault_token
Date: Tue, 04 Aug 2026 17:05:55 +0000 [thread overview]
Message-ID: <20260804170555.940BF1F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260804162435.28617-3-borntraeger@linux.ibm.com>
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
Pre-existing issues:
- [Critical] Calling kfree() on a stack-allocated variable when reinjecting floating machine checks leads to a guest-triggerable kernel panic.
- [High] Uninitialized stack memory in `struct kvm_s390_irq` is leaked to the guest and userspace during machine check reinjection.
--
--- Patch [2]: [PATCH v2 2/7] KVM: s390: Zero initialize data structures for inject_pfault_token ---
commit 2b81aa54a540c9ab3f152dc0b18d8b86e716252d
Author: Christian Borntraeger <borntraeger@linux.ibm.com>
KVM: s390: Zero initialize data structures for inject_pfault_token
This commit fixes an issue where __kvm_inject_pfault_token() leaves fields
in the on-stack struct kvm_s390_irq uninitialized. These stale stack values
are copied into the cpu local variable, allowing a host user to access them
via migration ioctls. The fix zero-initializes the irq and inti structures.
> diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
> index 518a69c55e85c..611dcb5342101 100644
> --- a/arch/s390/kvm/kvm-s390.c
> +++ b/arch/s390/kvm/kvm-s390.c
> @@ -4474,8 +4474,8 @@ int kvm_s390_try_set_tod_clock(struct kvm *kvm, const struct kvm_s390_vm_tod_clo
> static void __kvm_inject_pfault_token(struct kvm_vcpu *vcpu, bool start_token,
> unsigned long token)
> {
> - struct kvm_s390_interrupt inti;
> - struct kvm_s390_irq irq;
> + struct kvm_s390_interrupt inti = {};
> + struct kvm_s390_irq irq = {};
[Severity: Critical]
This is a pre-existing issue, but while looking at these stack variables,
I noticed a similar pattern in arch/s390/kvm/interrupt.c that might lead to a
kernel panic.
In kvm_s390_reinject_machine_check(), the interrupt structure is allocated on
the kernel stack:
arch/s390/kvm/interrupt.c:kvm_s390_reinject_machine_check() {
...
struct kvm_s390_interrupt_info inti;
...
}
If a malicious L1 guest crafts a nested vSIE control block with mcic set to
include the mci.ck bit, __inject_vm() delegates to __inject_float_mchk(),
which then unconditionally frees the stack pointer:
arch/s390/kvm/interrupt.c:__inject_float_mchk() {
...
kfree(inti);
...
}
Could this allow an untrusted, unprivileged guest to trigger an immediate
kernel panic by corrupting the SLUB allocator?
[Severity: High]
This is a pre-existing issue, but there appears to be another uninitialized
stack leak in arch/s390/kvm/interrupt.c.
Also in kvm_s390_reinject_machine_check(), the irq structure is allocated on
the kernel stack without zero-initialization:
arch/s390/kvm/interrupt.c:kvm_s390_reinject_machine_check() {
...
struct kvm_s390_irq irq;
...
}
If triggered via vSIE without the mci.ck bit, the fixed_logout field remains
uninitialized. When __inject_mchk() is called, it blindly copies this memory:
arch/s390/kvm/interrupt.c:__inject_mchk() {
...
memcpy(&mchk->fixed_logout, &irq->u.mchk.fixed_logout,
sizeof(mchk->fixed_logout));
...
}
This uninitialized host kernel stack data is then written directly to guest
memory via __write_machine_check(), or leaked via KVM_GET_IRQ_STATE:
arch/s390/kvm/interrupt.c:__write_machine_check() {
...
rc |= write_guest_lc(vcpu, __LC_PSW_SAVE_AREA, &mchk->fixed_logout,
sizeof(mchk->fixed_logout));
...
}
Could this allow an untrusted guest to repeatedly dump 16 bytes of
uninitialized host kernel stack memory, potentially bypassing KASLR or leaking
sensitive information?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260804162435.28617-1-borntraeger@linux.ibm.com?part=2
next prev parent reply other threads:[~2026-08-04 17:05 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-04 16:24 [PATCH v2 0/7] KVM: s390: more fixes Christian Borntraeger
2026-08-04 16:24 ` [PATCH v2 1/7] KVM: s390: Remove user triggerable WARN_ON Christian Borntraeger
2026-08-04 16:33 ` sashiko-bot
2026-08-04 17:47 ` Douglas Freimuth
2026-08-04 16:24 ` [PATCH v2 2/7] KVM: s390: Zero initialize data structures for inject_pfault_token Christian Borntraeger
2026-08-04 17:05 ` sashiko-bot [this message]
2026-08-04 16:24 ` [PATCH v2 3/7] KVM: s390: Zero initialize irq in reinject_machine_check Christian Borntraeger
2026-08-04 17:18 ` Matthew Rosato
2026-08-04 17:20 ` sashiko-bot
2026-08-04 16:24 ` [PATCH v2 4/7] KVM: s390: Fix memory leak in guest debug handling Christian Borntraeger
2026-08-04 18:00 ` sashiko-bot
2026-08-04 16:24 ` [PATCH v2 5/7] KVM: s390: Fix old_data leak in guest debug error path Christian Borntraeger
2026-08-04 17:19 ` Matthew Rosato
2026-08-04 18:19 ` sashiko-bot
2026-08-04 16:24 ` [PATCH v2 6/7] KVM: s390: Take srcu when importing watchpoint data Christian Borntraeger
2026-08-04 18:40 ` sashiko-bot
2026-08-05 8:21 ` Christian Borntraeger
2026-08-04 16:24 ` [PATCH v2 7/7] KVM: s390: Free guest debug data on vcpu destroy Christian Borntraeger
2026-08-04 18:47 ` sashiko-bot
2026-08-04 20:03 ` Matthew Rosato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260804170555.940BF1F000E9@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=agordeev@linux.ibm.com \
--cc=borntraeger@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox