From: sashiko-bot@kernel.org
To: "Stefan Haberland" <sth@linux.ibm.com>
Cc: "Heiko Carstens" <hca@linux.ibm.com>,
"Vasily Gorbik" <gor@linux.ibm.com>,
"Alexander Gordeev" <agordeev@linux.ibm.com>,
linux-s390@vger.kernel.org
Subject: Re: [PATCH 15/19] s390/dasd: Stamp a format label into newly formatted volumes
Date: Wed, 05 Aug 2026 17:14:52 +0000 [thread overview]
Message-ID: <20260805171453.581B41F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260805111612.1285190-16-sth@linux.ibm.com>
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
New issues:
- [Medium] Data race on `ese_format_quick` allows concurrent space release to incorrectly taint the format label of a volume.
Pre-existing issues:
- [High] Heap buffer overflow in `dasd_eckd_build_format` when formatting multiple tracks with intensity 0x01, 0x04, 0x09, or 0x0c.
--
--- Patch [15]: [PATCH 15/19] s390/dasd: Stamp a format label into newly formatted volumes ---
commit 6ce217cc3945c138bfb4345ea55cd9cbaf16ceb9
Author: Stefan Haberland <sth@linux.ibm.com>
s390/dasd: Stamp a format label into newly formatted volumes
This commit writes a 512-byte on-disk label during CDL volume formatting to
record whether the volume is ESE and if it was a quick or full format.
The quick format state is derived from a preceding full space release.
> diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
> index 62c03c4787c83..25a9055b97a2c 100644
> --- a/drivers/s390/block/dasd_eckd.c
> +++ b/drivers/s390/block/dasd_eckd.c
> @@ -2723,6 +2724,28 @@ dasd_eckd_build_check(struct dasd_device *base, struct format_data_t *fdata,
> return cqr;
> }
>
> +/* Fill the format label into a R4 record buffer, zero-padded to blksize. */
> +static void dasd_eckd_fill_format_label(struct dasd_device *device, void *data,
> + unsigned int blksize)
> +{
> + struct dasd_eckd_private *private = device->private;
> + struct dasd_format_label *label = data;
> +
> + memset(label, 0, blksize);
> + label->magic = DASD_ESE_LABEL_MAGIC;
> + label->version = DASD_ESE_LABEL_VERSION;
> + if (dasd_eckd_is_ese(device))
> + label->flags |= DASD_ESE_LABEL_F_ESE;
> + if (private->ese_format_quick)
[Severity: Medium]
Is the ese_format_quick flag safe from concurrent updates?
In dasd_eckd_fill_format_label(), private->ese_format_quick is read locklessly
while generating the CCW requests in userspace context.
If a concurrent BIODASDRAS (space release) ioctl completes and sets this flag
to 1 via dasd_eckd_release_space_full():
dasd_eckd_release_space_full()
private->ese_format_quick = 1;
Could the concurrent format process fetch a stale or intermediate value and
incorrectly encode DASD_ESE_LABEL_F_QUICK into the volume's on-disk label?
> + label->flags |= DASD_ESE_LABEL_F_QUICK;
> + else
> + label->flags |= DASD_ESE_LABEL_F_FULL;
> + label->blksize = blksize;
> + label->format_tod = get_tod_clock();
> + strscpy(label->kernel_version, init_utsname()->release,
> + sizeof(label->kernel_version));
> +}
[ ... ]
> @@ -2774,6 +2798,15 @@ dasd_eckd_build_format(struct dasd_device *base, struct dasd_device *startdev,
>
> use_prefix = base_priv->features.feature[8] & 0x01;
>
> + /*
> + * Stamp the format label into R4 of the very first track. Only for CDL
> + * (R4 is the first non-special record there), only when this request
> + * covers track 0, only for the record-writing format intensities (not
> + * track invalidation), and only if the track actually has an R4.
> + */
> + write_label = (intensity & 0x08) && !((intensity & ~0x08) & 0x04) &&
> + fdata->start_unit == 0 && rpt > 3;
> +
> switch (intensity) {
> case 0x00: /* Normal format */
> case 0x08: /* Normal format, use cdl. */
> @@ -2820,6 +2853,10 @@ dasd_eckd_build_format(struct dasd_device *base, struct dasd_device *startdev,
> return ERR_PTR(-EINVAL);
> }
[Severity: High]
This is a pre-existing issue, but does this allocation lack a multiplication
factor for nr_tracks?
Looking at dasd_eckd_build_format(), for track invalidation
(intensity 0x04 or 0x0c), the memory calculation sets cplength statically
to 3 and datasize only provisions for a single eckd_count payload.
Later in the function, the code unconditionally iterates over nr_tracks:
for (j = 0; j < nr_tracks; j++) {
...
if ((intensity & ~0x08) & 0x04) { /* erase track */
ect = (struct eckd_count *) data;
data += sizeof(struct eckd_count);
...
ccw++;
}
}
If nr_tracks is greater than 1, it appears this loop will write past the
allocated bounds of the memory chunk since the allocation size was not scaled
by nr_tracks.
Can this cause a heap buffer overflow during a privileged BIODASDFMT ioctl?
>
> + /* room for the label data that R4 carries in addition to its count */
> + if (write_label)
> + datasize += fdata->blksize;
> +
> fcp = dasd_fmalloc_request(DASD_ECKD_MAGIC, cplength, datasize, startdev);
> if (IS_ERR(fcp))
> return fcp;
[ ... ]
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260805111612.1285190-1-sth@linux.ibm.com?part=15
next prev parent reply other threads:[~2026-08-05 17:14 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-05 11:15 [PATCH 00/19] s390/dasd: ESE Performance improvements Stefan Haberland
2026-08-05 11:15 ` [PATCH 01/19] s390/dasd: Do not complete a failed ESE read as successful Stefan Haberland
2026-08-05 11:48 ` sashiko-bot
2026-08-05 11:15 ` [PATCH 02/19] s390/dasd: Propagate partial completion length across ERP recovery Stefan Haberland
2026-08-05 12:17 ` sashiko-bot
2026-08-05 11:15 ` [PATCH 03/19] s390/dasd: Guard sysfs discipline callbacks against unallocated private data Stefan Haberland
2026-08-05 12:44 ` sashiko-bot
2026-08-05 11:15 ` [PATCH 04/19] s390/dasd: Snapshot intrc before freeing the request block Stefan Haberland
2026-08-05 13:06 ` sashiko-bot
2026-08-05 11:15 ` [PATCH 05/19] s390/dasd: Optimize max blocks per request for track alignment Stefan Haberland
2026-08-05 13:10 ` sashiko-bot
2026-08-05 11:15 ` [PATCH 06/19] s390/dasd: Use GFP_KERNEL in dasd_alloc_device() Stefan Haberland
2026-08-05 13:17 ` sashiko-bot
2026-08-05 11:16 ` [PATCH 07/19] s390/dasd: Add defines for the Extended Address Volume track address Stefan Haberland
2026-08-05 13:19 ` sashiko-bot
2026-08-05 11:16 ` [PATCH 08/19] s390/dasd: Add infrastructure for ESE full-track write Stefan Haberland
2026-08-05 14:02 ` sashiko-bot
2026-08-05 11:16 ` [PATCH 09/19] s390/dasd: Add range-based format-track collision detection Stefan Haberland
2026-08-05 15:11 ` sashiko-bot
2026-08-05 11:16 ` [PATCH 10/19] s390/dasd: Extend prepare_itcw() to support WRITE_FULL_TRACK Stefan Haberland
2026-08-05 15:39 ` sashiko-bot
2026-08-05 11:16 ` [PATCH 11/19] s390/dasd: Add dasd_eckd_build_cp_tpm_writefulltrack() Stefan Haberland
2026-08-05 15:53 ` sashiko-bot
2026-08-05 11:16 ` [PATCH 12/19] s390/dasd: Use WRITE_FULL_TRACK in ESE format handler Stefan Haberland
2026-08-05 16:21 ` sashiko-bot
2026-08-05 11:16 ` [PATCH 13/19] s390/dasd: Add full_track_bias to control fulltrack write mode Stefan Haberland
2026-08-05 16:41 ` sashiko-bot
2026-08-05 11:16 ` [PATCH 14/19] s390/dasd: Derive adaptive ESE fulltrack heuristic from ft_bias Stefan Haberland
2026-08-05 16:48 ` sashiko-bot
2026-08-05 11:16 ` [PATCH 15/19] s390/dasd: Stamp a format label into newly formatted volumes Stefan Haberland
2026-08-05 17:14 ` sashiko-bot [this message]
2026-08-05 11:16 ` [PATCH 16/19] s390/dasd: Detect ESE volumes from the on-disk format label Stefan Haberland
2026-08-05 19:34 ` sashiko-bot
2026-08-05 11:16 ` [PATCH 17/19] s390/dasd: Report ESE capability and format mode at device online Stefan Haberland
2026-08-05 19:44 ` sashiko-bot
2026-08-05 11:16 ` [PATCH 18/19] s390/dasd: Re-enable discard support for ESE volumes Stefan Haberland
2026-08-05 20:04 ` sashiko-bot
2026-08-05 11:16 ` [PATCH 19/19] s390/dasd: Read cached unit address and LSS in the CCW build path Stefan Haberland
2026-08-05 20:31 ` sashiko-bot
2026-08-05 12:32 ` [PATCH 00/19] s390/dasd: ESE Performance improvements Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260805171453.581B41F000E9@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=agordeev@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=linux-s390@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=sth@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox