From: Gautam Gala <ggala@linux.ibm.com>
To: borntraeger@linux.ibm.com, frankja@linux.ibm.com,
imbrenda@linux.ibm.com, kvm@vger.kernel.org,
linux-s390@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-kselftest@vger.kernel.org
Cc: david@kernel.org, hca@linux.ibm.com, gor@linux.ibm.com,
agordeev@linux.ibm.com, svens@linux.ibm.com, pbonzini@redhat.com,
seanjc@google.com, shuah@kernel.org
Subject: [PATCH 1/2] KVM: s390: fix ESSA addressing exception injection in migration mode
Date: Tue, 13 Oct 2026 16:42:24 +0200 [thread overview]
Message-ID: <20261013144225.8885-2-ggala@linux.ibm.com> (raw)
In-Reply-To: <20261013144225.8885-1-ggala@linux.ibm.com>
__do_essa() treated any negative return from dat_perform_essa() as the
normal "no CBRL entry appended" case and returned 0, so a page-table
walk failure silently dropped the addressing exception.
DAT_WALK_ANY is required in the dat_entry_walk() call so that a GFN
backed by a large page (segment or region entry) does not return an
error: the walk stops early but succeeds, leaving ptep as NULL, which is
already handled by the existing "set exception state, return -1" path.
Without DAT_WALK_ANY such addresses would fall through to the new error
path and incorrectly inject PGM_ADDRESSING.
Return -PGM_ADDRESSING on a walk failure and inject the program
interrupt in __do_essa() for the -PGM_ADDRESSING return value.
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap")
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Suggested-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Gautam Gala <ggala@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
---
arch/s390/kvm/gmap/dat.c | 5 ++++-
arch/s390/kvm/s390/priv.c | 4 +++-
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/s390/kvm/gmap/dat.c b/arch/s390/kvm/gmap/dat.c
index ff80d02c9f56..1bc6d2ec5b08 100644
--- a/arch/s390/kvm/gmap/dat.c
+++ b/arch/s390/kvm/gmap/dat.c
@@ -1084,6 +1084,7 @@ int dat_set_prefix_notif_bit(union asce asce, gfn_t gfn)
* * %1 if the page state has been altered and the page is to be added to the CBRL
* * %0 if the page state has been altered, but the page is not to be added to the CBRL
* * %-1 if the page state has not been altered and the page is not to be added to the CBRL
+ * * %-PGM_ADDRESSING if the guest page-table walk failed
*/
int dat_perform_essa(union asce asce, gfn_t gfn, int orc, union essa_state *state, bool *dirty)
{
@@ -1092,7 +1093,9 @@ int dat_perform_essa(union asce asce, gfn_t gfn, int orc, union essa_state *stat
union pte *ptep;
int res = 0;
- if (dat_entry_walk(NULL, gfn, asce, 0, TABLE_TYPE_PAGE_TABLE, &crstep, &ptep)) {
+ if (dat_entry_walk(NULL, gfn, asce, DAT_WALK_ANY, TABLE_TYPE_PAGE_TABLE, &crstep, &ptep))
+ return -PGM_ADDRESSING;
+ if (!ptep) {
*state = (union essa_state) { .exception = 1 };
return -1;
}
diff --git a/arch/s390/kvm/s390/priv.c b/arch/s390/kvm/s390/priv.c
index b3cb2c2c3aa7..2abd1bdfdf32 100644
--- a/arch/s390/kvm/s390/priv.c
+++ b/arch/s390/kvm/s390/priv.c
@@ -1168,8 +1168,10 @@ static inline int __do_essa(struct kvm_vcpu *vcpu, const int orc)
entries = (vcpu->arch.sie_block->cbrlo & ~PAGE_MASK) >> 3;
nappended = dat_perform_essa(vcpu->arch.gmap->asce, gfn, orc, &state, &dirtied);
+ if (nappended == -PGM_ADDRESSING)
+ return kvm_s390_inject_program_int(vcpu, -PGM_ADDRESSING);
vcpu->run->s.regs.gprs[r1] = state.val;
- if (nappended < 0)
+ if (nappended == -1)
return 0;
/*
* It is possible that all the normal 511 slots were full, in which case
--
2.55.0
next prev parent reply other threads:[~2026-10-13 14:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-13 14:42 [PATCH 0/2] KVM: s390: fix ESSA addressing exception injection in migration mode Gautam Gala
2026-10-13 14:42 ` Gautam Gala [this message]
2026-10-13 14:54 ` [PATCH 1/2] " sashiko-bot
2026-10-13 14:42 ` [PATCH 2/2] KVM: s390: selftests: add ESSA migration mode PGM_ADDRESSING regression test Gautam Gala
2026-10-13 14:50 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261013144225.8885-2-ggala@linux.ibm.com \
--to=ggala@linux.ibm.com \
--cc=agordeev@linux.ibm.com \
--cc=borntraeger@linux.ibm.com \
--cc=david@kernel.org \
--cc=frankja@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=shuah@kernel.org \
--cc=svens@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox