From: Anthony Krowiak <akrowiak@linux.ibm.com>
To: Alex Williamson <alex.williamson@redhat.com>
Cc: Halil Pasic <pasic@linux.ibm.com>,
Rorie Reyes <rreyes@linux.ibm.com>,
linux-s390@vger.kernel.org, linux-kernel@vger.kernel.org,
kvm@vger.kernel.org, hca@linux.ibm.com, borntraeger@de.ibm.com,
agordeev@linux.ibm.com, gor@linux.ibm.com, jjherne@linux.ibm.com
Subject: Re: [PATCH v1] s390/vfio-ap: Signal eventfd when guest AP configuration is changed
Date: Fri, 17 Jan 2025 07:55:05 -0500 [thread overview]
Message-ID: <f614bde5-6b35-4d6c-a373-f97671ea565d@linux.ibm.com> (raw)
In-Reply-To: <20250116115228.10eeb510.alex.williamson@redhat.com>
On 1/16/25 11:52 AM, Alex Williamson wrote:
> On Thu, 16 Jan 2025 10:38:41 -0500
> Anthony Krowiak <akrowiak@linux.ibm.com> wrote:
>
>> On 1/15/25 7:17 PM, Halil Pasic wrote:
>>> On Wed, 15 Jan 2025 14:35:02 -0500
>>> Anthony Krowiak <akrowiak@linux.ibm.com> wrote:
>>>
>>>>>> +static int vfio_ap_set_cfg_change_irq(struct ap_matrix_mdev *matrix_mdev, unsigned long arg)
>>>>>> +{
>>>>>> + s32 fd;
>>>>>> + void __user *data;
>>>>>> + unsigned long minsz;
>>>>>> + struct eventfd_ctx *cfg_chg_trigger;
>>>>>> +
>>>>>> + minsz = offsetofend(struct vfio_irq_set, count);
>>>>>> + data = (void __user *)(arg + minsz);
>>>>>> +
>>>>>> + if (get_user(fd, (s32 __user *)data))
>>>>>> + return -EFAULT;
>>>>>> +
>>>>>> + if (fd == -1) {
>>>>>> + if (matrix_mdev->cfg_chg_trigger)
>>>>>> + eventfd_ctx_put(matrix_mdev->cfg_chg_trigger);
>>>>>> + matrix_mdev->cfg_chg_trigger = NULL;
>>>>>> + } else if (fd >= 0) {
>>>>>> + cfg_chg_trigger = eventfd_ctx_fdget(fd);
>>>>>> + if (IS_ERR(cfg_chg_trigger))
>>>>>> + return PTR_ERR(cfg_chg_trigger);
>>>>>> +
>>>>>> + if (matrix_mdev->cfg_chg_trigger)
>>>>>> + eventfd_ctx_put(matrix_mdev->cfg_chg_trigger);
>>>>>> +
>>>>>> + matrix_mdev->cfg_chg_trigger = cfg_chg_trigger;
>>>>>> + } else {
>>>>>> + return -EINVAL;
>>>>>> + }
>>>>>> +
>>>>>> + return 0;
>>>>>> +}
>>>>> How does this guard against a use after free, such as the eventfd being
>>>>> disabled or swapped concurrent to a config change? Thanks,
>>>>>
>>>>> Alex
>>>> Hi Alex. I spent a great deal of time today trying to figure out exactly
>>>> what
>>>> you are asking here; reading about eventfd and digging through code.
>>>> I looked at other places where eventfd is used to set up communication
>>>> of events targetting a vfio device from KVM to userspace (e.g.,
>>>> hw/vfio/ccw.c)
>>>> and do not find anything much different than what is done here. In fact,
>>>> this code looks identical to the code that sets up an eventfd for the
>>>> VFIO_AP_REQ_IRQ_INDEX.
>>>>
>>>> Maybe you can explain how an eventfd is disabled or swapped, or maybe
>>>> explain how we can guard against its use after free. Thanks.
>>> Maybe I will try! The value of matrix_mdev->cfg_chg_trigger is used in:
>>> * vfio_ap_set_cfg_change_irq() (rw, with matrix_dev->mdevs_lock)
>>> * signal_guest_ap_cfg_changed()(r, takes no locks itself, )
>>> * called by vfio_ap_mdev_update_guest_apcb()
>>> * called at a bunch of places but AFAICT always with
>>> matrix_dev->mdevs_lock held
>>> * called by vfio_ap_mdev_unset_kvm() (with matrix_dev->mdevs_lock held
>>> via get_update_locks_for_kvm())
>>> * vfio_ap_mdev_probe() (w, assigns NULL to it)
>>>
>>> If vfio_ap_set_cfg_change_irq() could change/destroy
>>> matrix_mdev->cfg_chg_trigger while another thread of execution
>>> is using it e.g. with signal_guest_ap_cfg_changed() that would be a
>>> possible UAF and thus BAD.
>>>
>>> Now AFAICT matrix_mdev->cfg_chg_trigger is protected by
>>> matrix_dev->mdevs_lock on each access except for in vfio_ap_mdev_probe()
>>> which is AFAIK just an initialization in a safe state where we are
>>> guaranteed to have exclusive access.
>>>
>>> The eventfd is swapped and disabled in vfio_ap_set_cfg_change_irq() with
>>> userspace supplying a new valid fd or -1 respectively.
>>>
>>> Tony does that answer your question to Alex?
>>>
>>> Alex, does the above answer your question on what guards against UAF (the
>>> short answer is: matrix_dev->mdevs_lock)?
> Yes, that answers my question, thanks for untangling it. We might
> consider a lockdep_assert_held() in the new
> signal_guest_ap_cfg_changed() since it does get called from a variety
> of paths and we need that lock to prevent the UAF.
>
>> I agree that the matrix_dev->mdevs_lock does prevent changes to
>> matrix_mdev->cfg_chg_trigger while it is being accessed by the
>> vfio_ap device driver. My confusion arises from my interpretation of
>> Alex's question; it seemed to me that he was talking its use outside
>> of the vfio_ap driver and how to guard against that.
> Nope, Halil zeroed in on the UAF possibility that concerned me. Thanks,
He is a marksman!:)
>
> Alex
>
next prev parent reply other threads:[~2025-01-17 12:55 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-07 18:36 [PATCH v1] s390/vfio-ap: Signal eventfd when guest AP configuration is changed Rorie Reyes
2025-01-13 16:08 ` Alexander Gordeev
2025-02-05 17:33 ` Rorie Reyes
2025-02-05 17:47 ` Anthony Krowiak
2025-02-06 7:40 ` Alexander Gordeev
2025-02-06 14:12 ` Rorie Reyes
2025-02-11 7:58 ` Alexander Gordeev
2025-02-11 15:02 ` Rorie Reyes
2025-02-11 20:24 ` Anthony Krowiak
2025-02-12 10:55 ` Vasily Gorbik
2025-01-14 9:03 ` Harald Freudenberger
2025-01-16 16:46 ` Anthony Krowiak
2025-01-17 8:30 ` Harald Freudenberger
2025-01-17 12:42 ` Anthony Krowiak
2025-01-14 20:05 ` Alex Williamson
2025-01-15 19:35 ` Anthony Krowiak
2025-01-16 0:17 ` Halil Pasic
2025-01-16 15:38 ` Anthony Krowiak
2025-01-16 16:52 ` Alex Williamson
2025-01-16 19:18 ` Halil Pasic
2025-01-17 12:50 ` Anthony Krowiak
2025-01-17 12:55 ` Anthony Krowiak [this message]
2025-01-16 19:30 ` Halil Pasic
2025-01-17 12:53 ` Anthony Krowiak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f614bde5-6b35-4d6c-a373-f97671ea565d@linux.ibm.com \
--to=akrowiak@linux.ibm.com \
--cc=agordeev@linux.ibm.com \
--cc=alex.williamson@redhat.com \
--cc=borntraeger@de.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=jjherne@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=pasic@linux.ibm.com \
--cc=rreyes@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox