Linux Samsung SOC development
 help / color / mirror / Atom feed
From: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
To: linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Maurus Cuelenaere
	<mcuelenaere-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Subject: [PATCH 01/11] USB: s3c_hsotg: Add support for external USB clock
Date: Wed, 26 May 2010 05:09:19 +0100	[thread overview]
Message-ID: <1274846966-23247-2-git-send-email-ben-linux@fluff.org> (raw)
In-Reply-To: <1274846966-23247-1-git-send-email-ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>

From: Maurus Cuelenaere <mcuelenaere-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

The PLL that drives the USB clock supports 3 input clocks: 12, 24 and 48Mhz.
This patch adds support to the USB driver for setting the correct register bit
according to the given clock.

This depends on the following patch:
[PATCH] ARM: S3C64XX: Add USB external clock definition

Signed-off-by: Maurus Cuelenaere <mcuelenaere-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
---
 drivers/usb/gadget/s3c-hsotg.c |   19 +++++++++++++++++++
 1 files changed, 19 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 1f73b48..dce9366 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/clk.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
@@ -2699,6 +2700,7 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
  */
 static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
 {
+	struct clk *xusbxti;
 	u32 osc;
 
 	writel(0, S3C_PHYPWR);
@@ -2706,6 +2708,23 @@ static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
 
 	osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0;
 
+	xusbxti = clk_get(hsotg->dev, "xusbxti");
+	if (xusbxti && !IS_ERR(xusbxti)) {
+		switch (clk_get_rate(xusbxti)) {
+		case 12000000:
+		    osc |= S3C_PHYCLK_CLKSEL_12M;
+		    break;
+		case 24000000:
+		    osc |= S3C_PHYCLK_CLKSEL_24M;
+		    break;
+		default:
+		case 48000000:
+		    /* default reference clock */
+		    break;
+		}
+		clk_put(xusbxti);
+	}
+
 	writel(osc | 0x10, S3C_PHYCLK);
 
 	/* issue a full set of resets to the otg and core */
-- 
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2010-05-26  4:09 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-26  4:09 s3c-hsotg driver updates/fixes Ben Dooks
2010-05-26  4:09 ` [PATCH 03/11] USB: s3c-hsotg: Ensure TX FIFO addresses setup when initialising FIFOs Ben Dooks
     [not found] ` <1274846966-23247-1-git-send-email-ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
2010-05-26  4:09   ` Ben Dooks [this message]
2010-05-26  4:09   ` [PATCH 02/11] USB: s3c_hsotg: define USB_GADGET_DUALSPEED in Kconfig Ben Dooks
2010-05-26  4:09   ` [PATCH 04/11] USB: s3c-hsotg: SoftDisconnect minimum 3ms Ben Dooks
2010-05-26  4:09   ` [PATCH 05/11] USB: s3c-hsotg: Ensure FIFOs are fully flushed after layout Ben Dooks
2010-05-26  4:09   ` [PATCH 07/11] USB: s3c-hsotg: Increase TX fifo limit Ben Dooks
2010-05-26  4:09 ` [PATCH 06/11] USB: s3c-hsotg: Enable soft disconnect during initialization Ben Dooks

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1274846966-23247-2-git-send-email-ben-linux@fluff.org \
    --to=ben-linux-elnmno+kys3ytjvyw6ydsg@public.gmane.org \
    --cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mcuelenaere-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox