Linux Samsung SOC development
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Kukjin Kim <kgene.kim@samsung.com>,
	Grant Likely <grant.likely@linaro.org>
Cc: linux-samsung-soc@vger.kernel.org, Mark Brown <broonie@linaro.org>
Subject: [PATCH] spi/s3c64xx: Remove unused message queue
Date: Fri,  5 Jul 2013 18:56:33 +0100	[thread overview]
Message-ID: <1373046993-1349-1-git-send-email-broonie@kernel.org> (raw)

From: Mark Brown <broonie@linaro.org>

Since the driver has been converted to use the core message pump code
the only use of the messsage queue in the driver is a check to see if
it is empty which will always succeed since nothing ever adds to the
queue. Just remove the queue.

Signed-off-by: Mark Brown <broonie@linaro.org>
---
 drivers/spi/spi-s3c64xx.c | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index eb53df2..def13e8 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -172,7 +172,6 @@ struct s3c64xx_spi_port_config {
  * @master: Pointer to the SPI Protocol master.
  * @cntrlr_info: Platform specific data for the controller this driver manages.
  * @tgl_spi: Pointer to the last CS left untoggled by the cs_change hint.
- * @queue: To log SPI xfer requests.
  * @lock: Controller specific lock.
  * @state: Set of FLAGS to indicate status.
  * @rx_dmach: Controller's DMA channel for Rx.
@@ -193,7 +192,6 @@ struct s3c64xx_spi_driver_data {
 	struct spi_master               *master;
 	struct s3c64xx_spi_info  *cntrlr_info;
 	struct spi_device               *tgl_spi;
-	struct list_head                queue;
 	spinlock_t                      lock;
 	unsigned long                   sfr_start;
 	struct completion               xfer_completion;
@@ -1053,8 +1051,6 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
 	struct s3c64xx_spi_csinfo *cs = spi->controller_data;
 	struct s3c64xx_spi_driver_data *sdd;
 	struct s3c64xx_spi_info *sci;
-	struct spi_message *msg;
-	unsigned long flags;
 	int err;
 
 	sdd = spi_master_get_devdata(spi->master);
@@ -1085,21 +1081,6 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
 
 	sci = sdd->cntrlr_info;
 
-	spin_lock_irqsave(&sdd->lock, flags);
-
-	list_for_each_entry(msg, &sdd->queue, queue) {
-		/* Is some mssg is already queued for this device */
-		if (msg->spi == spi) {
-			dev_err(&spi->dev,
-				"setup: attempt while mssg in queue!\n");
-			spin_unlock_irqrestore(&sdd->lock, flags);
-			err = -EBUSY;
-			goto err_msgq;
-		}
-	}
-
-	spin_unlock_irqrestore(&sdd->lock, flags);
-
 	pm_runtime_get_sync(&sdd->pdev->dev);
 
 	/* Check if we can provide the requested rate */
@@ -1146,7 +1127,6 @@ setup_exit:
 	/* setup() returns with device de-selected */
 	disable_cs(sdd, spi);
 
-err_msgq:
 	gpio_free(cs->line);
 	spi_set_ctldata(spi, NULL);
 
@@ -1439,7 +1419,6 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 
 	spin_lock_init(&sdd->lock);
 	init_completion(&sdd->xfer_completion);
-	INIT_LIST_HEAD(&sdd->queue);
 
 	ret = devm_request_irq(&pdev->dev, irq, s3c64xx_spi_irq, 0,
 				"spi-s3c64xx", sdd);
-- 
1.8.3.2

             reply	other threads:[~2013-07-05 17:57 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-05 17:56 Mark Brown [this message]
2013-07-05 23:54 ` [PATCH] spi/s3c64xx: Remove unused message queue Tomasz Figa
2013-07-24 13:18 ` Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1373046993-1349-1-git-send-email-broonie@kernel.org \
    --to=broonie@kernel.org \
    --cc=broonie@linaro.org \
    --cc=grant.likely@linaro.org \
    --cc=kgene.kim@samsung.com \
    --cc=linux-samsung-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox