* [PATCH AUTOSEL 4.19 022/172] clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical
[not found] <20200618012218.607130-1-sashal@kernel.org>
@ 2020-06-18 1:19 ` Sasha Levin
2020-06-18 1:21 ` [PATCH AUTOSEL 4.19 102/172] clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1 Sasha Levin
1 sibling, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2020-06-18 1:19 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Marek Szyprowski, Chanwoo Choi, Sylwester Nawrocki, Sasha Levin,
linux-samsung-soc, linux-clk, linux-arm-kernel
From: Marek Szyprowski <m.szyprowski@samsung.com>
[ Upstream commit e47bd937e602bb4379546095d1bd0b9871fa60c2 ]
The TOP 'aclk*_isp', 'aclk550_cam', 'gscl_wa' and 'gscl_wb' clocks must
be kept enabled all the time to allow proper access to power management
control for the ISP and CAM power domains. The last two clocks, although
related to GScaler device and GSCL power domain, provides also the
I_WRAP_CLK signal to MIPI CSIS0/1 devices, which are a part of CAM power
domain and are needed for proper power on/off sequence.
Currently there are no drivers for the devices, which are part of CAM and
ISP power domains yet. This patch only fixes the race between disabling
the unused power domains and disabling unused clocks, which randomly
resulted in the following error during boot:
Power domain CAM disable failed
Power domain ISP disable failed
Fixes: 318fa46cc60d ("clk/samsung: exynos542x: mark some clocks as critical")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/samsung/clk-exynos5420.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 6473af8903c5..662bb441f139 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -597,7 +597,7 @@ static const struct samsung_div_clock exynos5800_div_clks[] __initconst = {
static const struct samsung_gate_clock exynos5800_gate_clks[] __initconst = {
GATE(CLK_ACLK550_CAM, "aclk550_cam", "mout_user_aclk550_cam",
- GATE_BUS_TOP, 24, 0, 0),
+ GATE_BUS_TOP, 24, CLK_IS_CRITICAL, 0),
GATE(CLK_ACLK432_SCALER, "aclk432_scaler", "mout_user_aclk432_scaler",
GATE_BUS_TOP, 27, CLK_IS_CRITICAL, 0),
GATE(CLK_MAU_EPLL, "mau_epll", "mout_user_mau_epll",
@@ -984,25 +984,25 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
GATE(0, "aclk300_jpeg", "mout_user_aclk300_jpeg",
GATE_BUS_TOP, 4, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk333_432_isp0", "mout_user_aclk333_432_isp0",
- GATE_BUS_TOP, 5, 0, 0),
+ GATE_BUS_TOP, 5, CLK_IS_CRITICAL, 0),
GATE(0, "aclk300_gscl", "mout_user_aclk300_gscl",
GATE_BUS_TOP, 6, CLK_IS_CRITICAL, 0),
GATE(0, "aclk333_432_gscl", "mout_user_aclk333_432_gscl",
GATE_BUS_TOP, 7, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk333_432_isp", "mout_user_aclk333_432_isp",
- GATE_BUS_TOP, 8, 0, 0),
+ GATE_BUS_TOP, 8, CLK_IS_CRITICAL, 0),
GATE(CLK_PCLK66_GPIO, "pclk66_gpio", "mout_user_pclk66_gpio",
GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen",
GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk266_isp", "mout_user_aclk266_isp",
- GATE_BUS_TOP, 13, 0, 0),
+ GATE_BUS_TOP, 13, CLK_IS_CRITICAL, 0),
GATE(0, "aclk166", "mout_user_aclk166",
GATE_BUS_TOP, 14, CLK_IGNORE_UNUSED, 0),
GATE(CLK_ACLK333, "aclk333", "mout_user_aclk333",
GATE_BUS_TOP, 15, CLK_IS_CRITICAL, 0),
GATE(0, "aclk400_isp", "mout_user_aclk400_isp",
- GATE_BUS_TOP, 16, 0, 0),
+ GATE_BUS_TOP, 16, CLK_IS_CRITICAL, 0),
GATE(0, "aclk400_mscl", "mout_user_aclk400_mscl",
GATE_BUS_TOP, 17, CLK_IS_CRITICAL, 0),
GATE(0, "aclk200_disp1", "mout_user_aclk200_disp1",
@@ -1208,8 +1208,10 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
GATE_IP_GSCL1, 3, 0, 0),
GATE(CLK_SMMU_FIMCL1, "smmu_fimcl1", "dout_gscl_blk_333",
GATE_IP_GSCL1, 4, 0, 0),
- GATE(CLK_GSCL_WA, "gscl_wa", "sclk_gscl_wa", GATE_IP_GSCL1, 12, 0, 0),
- GATE(CLK_GSCL_WB, "gscl_wb", "sclk_gscl_wb", GATE_IP_GSCL1, 13, 0, 0),
+ GATE(CLK_GSCL_WA, "gscl_wa", "sclk_gscl_wa", GATE_IP_GSCL1, 12,
+ CLK_IS_CRITICAL, 0),
+ GATE(CLK_GSCL_WB, "gscl_wb", "sclk_gscl_wb", GATE_IP_GSCL1, 13,
+ CLK_IS_CRITICAL, 0),
GATE(CLK_SMMU_FIMCL3, "smmu_fimcl3,", "dout_gscl_blk_333",
GATE_IP_GSCL1, 16, 0, 0),
GATE(CLK_FIMC_LITE3, "fimc_lite3", "aclk333_432_gscl",
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH AUTOSEL 4.19 102/172] clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1
[not found] <20200618012218.607130-1-sashal@kernel.org>
2020-06-18 1:19 ` [PATCH AUTOSEL 4.19 022/172] clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical Sasha Levin
@ 2020-06-18 1:21 ` Sasha Levin
1 sibling, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2020-06-18 1:21 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Marek Szyprowski, Sylwester Nawrocki, Sasha Levin,
linux-samsung-soc, linux-clk, linux-arm-kernel
From: Marek Szyprowski <m.szyprowski@samsung.com>
[ Upstream commit 25bdae0f1c6609ceaf55fe6700654f0be2253d8e ]
Mark the SCLK clock for Exynos5433 I2S1 device with IGNORE_UNUSED flag to
match its behaviour with SCLK clock for AUD_I2S (I2S0) device until
a proper fix for Exynos I2S driver is ready.
This fixes the following synchronous abort issue revealed by the probe
order change caused by the commit 93d2e4322aa7 ("of: platform: Batch
fwnode parsing when adding all top level devices")
Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 50 Comm: kworker/0:1 Not tainted 5.7.0-rc5+ #701
Hardware name: Samsung TM2E board (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : samsung_i2s_probe+0x768/0x8f0
lr : samsung_i2s_probe+0x688/0x8f0
...
Call trace:
samsung_i2s_probe+0x768/0x8f0
platform_drv_probe+0x50/0xa8
really_probe+0x108/0x370
driver_probe_device+0x54/0xb8
__device_attach_driver+0x90/0xc0
bus_for_each_drv+0x70/0xc8
__device_attach+0xdc/0x140
device_initial_probe+0x10/0x18
bus_probe_device+0x94/0xa0
deferred_probe_work_func+0x70/0xa8
process_one_work+0x2a8/0x718
worker_thread+0x48/0x470
kthread+0x134/0x160
ret_from_fork+0x10/0x1c
Code: 17ffffaf d503201f f94086c0 91003000 (88dffc00)
---[ end trace ccf721c9400ddbd6 ]---
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/samsung/clk-exynos5433.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index 302596dc79a2..0f2a9d767eef 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -1680,7 +1680,8 @@ static const struct samsung_gate_clock peric_gate_clks[] __initconst = {
GATE(CLK_SCLK_PCM1, "sclk_pcm1", "sclk_pcm1_peric",
ENABLE_SCLK_PERIC, 7, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_I2S1, "sclk_i2s1", "sclk_i2s1_peric",
- ENABLE_SCLK_PERIC, 6, CLK_SET_RATE_PARENT, 0),
+ ENABLE_SCLK_PERIC, 6,
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
GATE(CLK_SCLK_SPI2, "sclk_spi2", "sclk_spi2_peric", ENABLE_SCLK_PERIC,
5, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_SPI1, "sclk_spi1", "sclk_spi1_peric", ENABLE_SCLK_PERIC,
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread