[PATCH 3/3] ARM: S5PV210: Add voltage consumer of WM8994 to the regulator framework

[Chanwoo Choi <cw00.choi@samsung.com>]

This patch add cose related to regulator. To control powre consumeption
have registered the voltage consumer of WM8994 to the regulator framework.

Additionally, I explain the constraints of the regulator of WM8994 codec.
All these consumer supply of WM8994 codec connected the regulator(VCC_1.8V)
on a circuit diagram. "VCC_1.8V" regulator is always enabled, because it is
used to many devices on Goni/Aquila board. This is required especially
when there are many devices physically attached to "VCC_1.8V" and some of
they did not "register" as consumers to "VCC_1.8V". "VCC_1.8V" might be
turned off by those who are registered while "unregistered" are still active

Signed-off-by : Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by : Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by : Kyungmin Park <kyungmin.park@samsung.com>
---
 arch/arm/mach-s5pv210/mach-aquila.c |  119 +++++++++++++++++++++++++++++++++++
 arch/arm/mach-s5pv210/mach-goni.c   |  119 +++++++++++++++++++++++++++++++++++
 2 files changed, 238 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 92dad41..825d70c 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -16,6 +16,8 @@
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/mfd/max8998.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/regulator/fixed.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
@@ -379,6 +381,120 @@ static struct max8998_platform_data aquila_max8998_pdata = {
 };
 #endif
 
+static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
+	{
+		.dev_name	= "5-001a",
+		.supply		= "DBVDD",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "AVDD2",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "CPVDD",
+	},
+
+};
+
+static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
+	{
+		.dev_name	= "5-001a",
+		.supply		= "SPKVDD1",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "SPKVDD2",
+	},
+};
+
+static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
+	.consumer_supplies	= wm8994_fixed_voltage0_supplies,
+};
+
+static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
+	.consumer_supplies	= wm8994_fixed_voltage1_supplies,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
+	.supply_name	= "VCC_1.8V_PDA",
+	.microvolts	= 1800000,
+	.gpio		= -EINVAL,
+	.init_data	= &wm8994_fixed_voltage0_init_data,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
+	.supply_name	= "V_BAT",
+	.microvolts	= 3700000,
+	.gpio		= -EINVAL,
+	.init_data	= &wm8994_fixed_voltage1_init_data,
+};
+
+static struct platform_device wm8994_fixed_voltage0 = {
+	.name		= "reg-fixed-voltage",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &wm8994_fixed_voltage0_config,
+	},
+};
+
+static struct platform_device wm8994_fixed_voltage1 = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &wm8994_fixed_voltage1_config,
+	},
+};
+
+static struct regulator_consumer_supply wm8994_avdd1_supply = {
+	.dev_name	= "5-001a",
+	.supply		= "AVDD1",
+};
+
+static struct regulator_consumer_supply wm8994_dcvdd_supply = {
+	.dev_name	= "5-001a",
+	.supply		= "DCVDD",
+};
+
+static struct regulator_init_data wm8994_ldo1_data = {
+	.constraints	= {
+		.name		= "AVDD1_3.0V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &wm8994_avdd1_supply,
+};
+
+static struct regulator_init_data wm8994_ldo2_data = {
+	.constraints	= {
+		.name		= "DCVDD_1.0V",
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &wm8994_dcvdd_supply,
+};
+
+static struct wm8994_pdata wm8994_platform_data = {
+	/* configure gpio1 function: 0x0001(Logic level input/output) */
+	.gpio_defaults[0] = 0x0001,
+	/* configure gpio3/4/5/7 function for AIF2 voice */
+	.gpio_defaults[2] = 0x8100,
+	.gpio_defaults[3] = 0x8100,
+	.gpio_defaults[4] = 0x8100,
+	.gpio_defaults[6] = 0x0100,
+	/* configure gpio8/9/10/11 function for AIF3 BT */
+	.gpio_defaults[7] = 0x8100,
+	.gpio_defaults[8] = 0x0100,
+	.gpio_defaults[9] = 0x0100,
+	.gpio_defaults[10] = 0x0100,
+	.ldo[0]	= { S5PV210_MP03(6), NULL, &wm8994_ldo1_data },	/* XM0FRNB_2 */
+	.ldo[1]	= { 0, NULL, &wm8994_ldo2_data },
+};
+
 /* GPIO I2C PMIC */
 #define AP_I2C_GPIO_PMIC_BUS_4	4
 static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
@@ -423,6 +539,7 @@ static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
 	{
 		/* CS/ADDR = low 0x34 (FYI: high = 0x36) */
 		I2C_BOARD_INFO("wm8994", 0x1a),
+		.platform_data	= &wm8994_platform_data,
 	},
 };
 
@@ -508,6 +625,8 @@ static struct platform_device *aquila_devices[] __initdata = {
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
 	&s5pv210_device_iis0,
+	&wm8994_fixed_voltage0,
+	&wm8994_fixed_voltage1,
 };
 
 static void __init aquila_sound_init(void)
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index d3bab85..667d453 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -16,6 +16,8 @@
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/mfd/max8998.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/regulator/fixed.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
@@ -360,6 +362,120 @@ static struct max8998_platform_data goni_max8998_pdata = {
 };
 #endif
 
+static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
+	{
+		.dev_name	= "5-001a",
+		.supply		= "DBVDD",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "AVDD2",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "CPVDD",
+	},
+
+};
+
+static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
+	{
+		.dev_name	= "5-001a",
+		.supply		= "SPKVDD1",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "SPKVDD2",
+	},
+};
+
+static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
+	.consumer_supplies	= wm8994_fixed_voltage0_supplies,
+};
+
+static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
+	.consumer_supplies	= wm8994_fixed_voltage1_supplies,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
+	.supply_name	= "VCC_1.8V_PDA",
+	.microvolts	= 1800000,
+	.gpio		= -EINVAL,
+	.init_data	= &wm8994_fixed_voltage0_init_data,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
+	.supply_name	= "V_BAT",
+	.microvolts	= 3700000,
+	.gpio		= -EINVAL,
+	.init_data	= &wm8994_fixed_voltage1_init_data,
+};
+
+static struct platform_device wm8994_fixed_voltage0 = {
+	.name		= "reg-fixed-voltage",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &wm8994_fixed_voltage0_config,
+	},
+};
+
+static struct platform_device wm8994_fixed_voltage1 = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &wm8994_fixed_voltage1_config,
+	},
+};
+
+static struct regulator_consumer_supply wm8994_avdd1_supply = {
+	.dev_name	= "5-001a",
+	.supply		= "AVDD1",
+};
+
+static struct regulator_consumer_supply wm8994_dcvdd_supply = {
+	.dev_name	= "5-001a",
+	.supply		= "DCVDD",
+};
+
+static struct regulator_init_data wm8994_ldo1_data = {
+	.constraints	= {
+		.name		= "AVDD1_3.0V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &wm8994_avdd1_supply,
+};
+
+static struct regulator_init_data wm8994_ldo2_data = {
+	.constraints	= {
+		.name		= "DCVDD_1.0V",
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &wm8994_dcvdd_supply,
+};
+
+static struct wm8994_pdata wm8994_platform_data = {
+	/* configure gpio1 function: 0x0001(Logic level input/output) */
+	.gpio_defaults[0] = 0x0001,
+	/* configure gpio3/4/5/7 function for AIF2 voice */
+	.gpio_defaults[2] = 0x8100,
+	.gpio_defaults[3] = 0x8100,
+	.gpio_defaults[4] = 0x8100,
+	.gpio_defaults[6] = 0x0100,
+	/* configure gpio8/9/10/11 function for AIF3 BT */
+	.gpio_defaults[7] = 0x8100,
+	.gpio_defaults[8] = 0x0100,
+	.gpio_defaults[9] = 0x0100,
+	.gpio_defaults[10] = 0x0100,
+	.ldo[0]	= { S5PV210_MP03(6), NULL, &wm8994_ldo1_data },	/* XM0FRNB_2 */
+	.ldo[1]	= { 0, NULL, &wm8994_ldo2_data },
+};
+
 /* GPIO I2C PMIC */
 #define AP_I2C_GPIO_PMIC_BUS_4	4
 static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = {
@@ -404,6 +520,7 @@ static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
 	{
 		/* CS/ADDR = low 0x34 (FYI: high = 0x36) */
 		I2C_BOARD_INFO("wm8994", 0x1a),
+		.platform_data	= &wm8994_platform_data,
 	},
 };
 
@@ -489,6 +606,8 @@ static struct platform_device *goni_devices[] __initdata = {
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
 	&s5pv210_device_iis0,
+	&wm8994_fixed_voltage0,
+	&wm8994_fixed_voltage1,
 };
 
 static void __init goni_sound_init(void)
-- 
1.7.0.4