From: Romain Naour <romain.naour@openwide.fr>
To: Tomasz Figa <tomasz.figa@gmail.com>
Cc: "Heiko Stübner" <heiko@sntech.de>,
"Kukjin Kim" <kgene.kim@samsung.com>,
linux-samsung-soc@vger.kernel.org, ben-linux@fluff.org,
"'Sylwester Nawrocki'" <sylvester.nawrocki@gmail.com>
Subject: [PATCH 2/5 v3] Add samsung-time support for s3c24xx
Date: Wed, 09 Jan 2013 23:43:56 +0100 [thread overview]
Message-ID: <50EDF2AC.6070203@openwide.fr> (raw)
In-Reply-To: <6825637.7rn5o5FT8e@flatron>
Signed-off-by: Naour Romain <romain.naour@openwide.fr>
---
arch/arm/Kconfig | 3 ++-
arch/arm/mach-s3c24xx/Kconfig | 6 ++++++
arch/arm/mach-s3c24xx/mach-amlm5900.c | 5 ++++-
arch/arm/mach-s3c24xx/mach-anubis.c | 4 +++-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 4 +++-
arch/arm/mach-s3c24xx/mach-bast.c | 4 +++-
arch/arm/mach-s3c24xx/mach-gta02.c | 4 +++-
arch/arm/mach-s3c24xx/mach-h1940.c | 5 +++--
arch/arm/mach-s3c24xx/mach-jive.c | 4 +++-
arch/arm/mach-s3c24xx/mach-mini2440.c | 4 +++-
arch/arm/mach-s3c24xx/mach-n30.c | 6 ++++--
arch/arm/mach-s3c24xx/mach-nexcoder.c | 4 +++-
arch/arm/mach-s3c24xx/mach-osiris.c | 4 +++-
arch/arm/mach-s3c24xx/mach-otom.c | 4 +++-
arch/arm/mach-s3c24xx/mach-qt2410.c | 4 +++-
arch/arm/mach-s3c24xx/mach-rx1950.c | 4 +++-
arch/arm/mach-s3c24xx/mach-rx3715.c | 4 +++-
arch/arm/mach-s3c24xx/mach-smdk2410.c | 4 +++-
arch/arm/mach-s3c24xx/mach-smdk2413.c | 8 +++++---
arch/arm/mach-s3c24xx/mach-smdk2416.c | 4 +++-
arch/arm/mach-s3c24xx/mach-smdk2440.c | 4 +++-
arch/arm/mach-s3c24xx/mach-smdk2443.c | 4 +++-
arch/arm/mach-s3c24xx/mach-tct_hammer.c | 4 +++-
arch/arm/mach-s3c24xx/mach-vr1000.c | 4 +++-
arch/arm/mach-s3c24xx/mach-vstms.c | 5 +++--
arch/arm/plat-samsung/include/plat/cpu.h | 2 +-
arch/arm/plat-samsung/include/plat/samsung-time.h | 11 +++++++++++
arch/arm/plat-samsung/samsung-time.c | 12 ++++++------
28 files changed, 99 insertions(+), 36 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f95ba14..2796959 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -743,8 +743,9 @@ config ARCH_SA1100
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
select ARCH_HAS_CPUFREQ
- select ARCH_USES_GETTIMEOFFSET
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 25df14a..94d01c3 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -21,6 +21,7 @@ config CPU_S3C2410
select S3C2410_CLOCK
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
select S3C2410_PM if PM
+ select SAMSUNG_HRT
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
@@ -32,6 +33,7 @@ config CPU_S3C2412
select CPU_LLSERIAL_S3C2440
select S3C2412_DMA if S3C24XX_DMA
select S3C2412_PM if PM
+ select SAMSUNG_HRT
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
@@ -44,6 +46,7 @@ config CPU_S3C2416
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
+ select SAMSUNG_HRT
help
Support for the S3C2416 SoC from the S3C24XX line
@@ -54,6 +57,7 @@ config CPU_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2440_DMA if S3C24XX_DMA
+ select SAMSUNG_HRT
help
Support for S3C2440 Samsung Mobile CPU based systems.
@@ -63,6 +67,7 @@ config CPU_S3C2442
select CPU_LLSERIAL_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
+ select SAMSUNG_HRT
help
Support for S3C2442 Samsung Mobile CPU based systems.
@@ -78,6 +83,7 @@ config CPU_S3C2443
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
+ select SAMSUNG_HRT
help
Support for the S3C2443 SoC from the S3C24XX line
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index f4ad99c..84c9bb0 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -63,6 +63,8 @@
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
+#include <plat/samsung-time.h>
+
#include "common.h"
static struct resource amlm5900_nor_resource =
@@ -160,6 +162,7 @@ static void __init amlm5900_map_io(void)
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
#ifdef CONFIG_FB_S3C2410
@@ -237,6 +240,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
.map_io = amlm5900_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = amlm5900_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 113304c..8ac052c 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -50,6 +50,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/samsung-time.h>
#include "anubis.h"
#include "common.h"
@@ -411,6 +412,7 @@ static void __init anubis_map_io(void)
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* check for the newer revision boards with large page nand */
@@ -445,6 +447,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
.map_io = anubis_map_io,
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index f51bbcb..0314c89 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -49,6 +49,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/mmc-s3cmci.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -193,6 +194,7 @@ static void __init at2440evb_map_io(void)
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init at2440evb_init(void)
@@ -211,6 +213,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 1ed29b4..bd6cba7 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -56,6 +56,7 @@
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "bast.h"
#include "common.h"
@@ -577,6 +578,7 @@ static void __init bast_map_io(void)
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init bast_init(void)
@@ -606,6 +608,6 @@ MACHINE_START(BAST, "Simtec-BAST")
.map_io = bast_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = bast_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 1053706..265c7d4 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -82,6 +82,7 @@
#include <plat/gpio-cfg.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "gta02.h"
@@ -502,6 +503,7 @@ static void __init gta02_map_io(void)
s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
@@ -590,6 +592,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
.map_io = gta02_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index afc05a7..2781a62 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -62,7 +62,7 @@
#include <plat/pll.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
-
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
@@ -646,6 +646,7 @@ static void __init h1940_map_io(void)
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* setup PM */
@@ -741,6 +742,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
.reserve = h1940_reserve,
.init_irq = h1940_init_irq,
.init_machine = h1940_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index c9954e2..01a894d 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -55,6 +55,7 @@
#include <plat/cpu.h>
#include <plat/pm.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/samsung-time.h>
static struct map_desc jive_iodesc[] __initdata = {
};
@@ -506,6 +507,7 @@ static void __init jive_map_io(void)
s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void jive_power_off(void)
@@ -661,6 +663,6 @@ MACHINE_START(JIVE, "JIVE")
.init_irq = s3c24xx_init_irq,
.map_io = jive_map_io,
.init_machine = jive_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index a31d5b8..045b259 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -57,6 +57,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include <sound/s3c24xx_uda134x.h>
@@ -526,6 +527,7 @@ static void __init mini2440_map_io(void)
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/*
@@ -688,6 +690,6 @@ MACHINE_START(MINI2440, "MINI2440")
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index c53a9bf..f6cea03 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -50,6 +50,7 @@
#include <linux/platform_data/mmc-s3cmci.h>
#include <plat/s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -536,6 +537,7 @@ static void __init n30_map_io(void)
n30_hwinit();
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/* GPB3 is the line that controls the pull-up for the USB D+ line */
@@ -589,7 +591,7 @@ MACHINE_START(N30, "Acer-N30")
Ben Dooks <ben-linux@fluff.org>
*/
.atag_offset = 0x100,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
@@ -600,7 +602,7 @@ MACHINE_START(N35, "Acer-N35")
/* Maintainer: Christer Weinigel <christer@weinigel.se>
*/
.atag_offset = 0x100,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index a2b92b0..4db6fb3 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -46,6 +46,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -137,6 +138,7 @@ static void __init nexcoder_map_io(void)
s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
nexcoder_sensorboard_init();
}
@@ -153,6 +155,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index 1eeeee4..c9bd133 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -44,6 +44,7 @@
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-timer.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
@@ -383,6 +384,7 @@ static void __init osiris_map_io(void)
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* check for the newer revision boards with large page nand */
@@ -425,6 +427,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
.map_io = osiris_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index 91d8493..f92ef9b 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -34,6 +34,7 @@
#include <plat/devs.h>
#include <plat/regs-serial.h>
#include <plat/s3c2410.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "otom.h"
@@ -102,6 +103,7 @@ static void __init otom11_map_io(void)
s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init otom11_init(void)
@@ -116,6 +118,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
.map_io = otom11_map_io,
.init_machine = otom11_init,
.init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 7b6ba13..e725554 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -60,6 +60,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -304,6 +305,7 @@ static void __init qt2410_map_io(void)
s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
s3c24xx_init_clocks(12*1000*1000);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init qt2410_machine_init(void)
@@ -343,6 +345,6 @@ MACHINE_START(QT2410, "QT2410")
.map_io = qt2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = qt2410_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index c7db767..833cfe2 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -58,6 +58,7 @@
#include <plat/pm.h>
#include <plat/regs-iic.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
@@ -741,6 +742,7 @@ static void __init rx1950_map_io(void)
s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* setup PM */
@@ -813,6 +815,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
.reserve = rx1950_reserve,
.init_irq = s3c24xx_init_irq,
.init_machine = rx1950_init_machine,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index b261dd3..cf72b44 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -49,6 +49,7 @@
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
@@ -179,6 +180,7 @@ static void __init rx3715_map_io(void)
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/* H1940 and RX3715 need to reserve this for suspend */
@@ -212,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
.reserve = rx3715_reserve,
.init_irq = rx3715_init_irq,
.init_machine = rx3715_init_machine,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index 82796b9..c7a18bc 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -53,6 +53,7 @@
#include <plat/cpu.h>
#include <plat/common-smdk.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -101,6 +102,7 @@ static void __init smdk2410_map_io(void)
s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2410_init(void)
@@ -117,6 +119,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
.map_io = smdk2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = smdk2410_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index b9d5703..454d51b 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -46,6 +46,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include <plat/common-smdk.h>
@@ -106,6 +107,7 @@ static void __init smdk2413_map_io(void)
s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2413_machine_init(void)
@@ -132,7 +134,7 @@ MACHINE_START(S3C2413, "S3C2413")
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2412_restart,
MACHINE_END
@@ -144,7 +146,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2412_restart,
MACHINE_END
@@ -156,6 +158,6 @@ MACHINE_START(SMDK2413, "SMDK2413")
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index 7de4120..ed753e8 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -51,6 +51,7 @@
#include <plat/sdhci.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/s3c-hsudc.h>
+#include <plat/samsung-time.h>
#include <plat/fb.h>
@@ -221,6 +222,7 @@ static void __init smdk2416_map_io(void)
s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2416_machine_init(void)
@@ -253,6 +255,6 @@ MACHINE_START(SMDK2416, "SMDK2416")
.init_irq = s3c24xx_init_irq,
.map_io = smdk2416_map_io,
.init_machine = smdk2416_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2416_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index 0bba786..2b56a4fd 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -43,6 +43,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include <plat/common-smdk.h>
@@ -163,6 +164,7 @@ static void __init smdk2440_map_io(void)
s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2440_machine_init(void)
@@ -181,6 +183,6 @@ MACHINE_START(S3C2440, "SMDK2440")
.init_irq = s3c24xx_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index c6d1a03..cd50581 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -43,6 +43,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include <plat/common-smdk.h>
@@ -122,6 +123,7 @@ static void __init smdk2443_map_io(void)
s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2443_machine_init(void)
@@ -143,6 +145,6 @@ MACHINE_START(SMDK2443, "SMDK2443")
.init_irq = s3c24xx_init_irq,
.map_io = smdk2443_map_io,
.init_machine = smdk2443_machine_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2443_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 495bf5c..90f43c9 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -53,6 +53,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -136,6 +137,7 @@ static void __init tct_hammer_map_io(void)
s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init tct_hammer_init(void)
@@ -149,6 +151,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
.map_io = tct_hammer_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = tct_hammer_init,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index d4db385..d1fe2d1 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -45,6 +45,7 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "bast.h"
#include "common.h"
@@ -332,6 +333,7 @@ static void __init vr1000_map_io(void)
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init vr1000_init(void)
@@ -354,6 +356,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
.init_irq = s3c24xx_init_irq,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index eef559c..0ad2f74 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -46,7 +46,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-
+#include <plat/samsung-time.h>
static struct map_desc vstms_iodesc[] __initdata = {
};
@@ -143,6 +143,7 @@ static void __init vstms_map_io(void)
s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init vstms_init(void)
@@ -160,6 +161,6 @@ MACHINE_START(VSTMS, "VSTMS")
.init_irq = s3c24xx_init_irq,
.init_machine = vstms_init,
.map_io = vstms_map_io,
- .timer = &s3c24xx_timer,
+ .timer = &samsung_timer,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index b69e11d..d585e70 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -192,7 +192,7 @@ extern void s3c24xx_init_uartdevs(char *name,
struct s3c24xx_uart_resources *res,
struct s3c2410_uartcfg *cfg, int no);
-/* timer for 2410/2440 */
+/* timer for s5pc100 only */
struct sys_timer;
extern struct sys_timer s3c24xx_timer;
diff --git a/arch/arm/plat-samsung/include/plat/samsung-time.h b/arch/arm/plat-samsung/include/plat/samsung-time.h
index 9d6d622..13ae4b9 100644
--- a/arch/arm/plat-samsung/include/plat/samsung-time.h
+++ b/arch/arm/plat-samsung/include/plat/samsung-time.h
@@ -30,7 +30,18 @@ struct samsung_timer_source {
/* Be able to sleep for atleast 4 seconds (usually more) */
#define SAMSUNG_TIMER_MIN_RANGE 4
+#ifdef CONFIG_ARCH_S3C24XX
+#define TCNT_MAX 0xffff
+#define TSCALER_DIV 25
+#define TDIV 50
+#define TSIZE 16
+#else
#define TCNT_MAX 0xffffffff
+#define TSCALER_DIV 2
+#define TDIV 2
+#define TSIZE 32
+#endif
+
#define NON_PERIODIC 0
#define PERIODIC 1
diff --git a/arch/arm/plat-samsung/samsung-time.c b/arch/arm/plat-samsung/samsung-time.c
index 91773bf..6d63fca 100644
--- a/arch/arm/plat-samsung/samsung-time.c
+++ b/arch/arm/plat-samsung/samsung-time.c
@@ -2,7 +2,7 @@
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
- * SAMSUNG - Common hr-timer support
+ * samsung - Common hr-timer support (s3c and s5p)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -267,8 +267,8 @@ static void __init samsung_clockevent_init(void)
tscaler = clk_get_parent(tdiv_event);
- clk_set_rate(tscaler, pclk / 2);
- clk_set_rate(tdiv_event, pclk / 2);
+ clk_set_rate(tscaler, pclk / TSCALER_DIV);
+ clk_set_rate(tdiv_event, pclk / TDIV);
clk_set_parent(tin_event, tdiv_event);
clock_rate = clk_get_rate(tin_event);
@@ -336,7 +336,7 @@ static void __init samsung_clocksource_init(void)
pclk = clk_get_rate(timerclk);
- clk_set_rate(tdiv_source, pclk / 2);
+ clk_set_rate(tdiv_source, pclk / TDIV);
clk_set_parent(tin_source, tdiv_source);
clock_rate = clk_get_rate(tin_source);
@@ -344,10 +344,10 @@ static void __init samsung_clocksource_init(void)
samsung_time_setup(timer_source.source_id, TCNT_MAX);
samsung_time_start(timer_source.source_id, PERIODIC);
- setup_sched_clock(samsung_read_sched_clock, 32, clock_rate);
+ setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate);
if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer",
- clock_rate, 250, 32, clocksource_mmio_readl_down))
+ clock_rate, 250, TSIZE, clocksource_mmio_readl_down))
panic("samsung_clocksource_timer: can't register clocksource\n");
}
--
1.8.0.3
next prev parent reply other threads:[~2013-01-09 22:44 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-24 20:56 [PATCH] S3C24XX: add clockevent/clocksource support Romain Naour
2012-10-25 20:39 ` Tomasz Figa
2012-10-26 10:51 ` Romain Naour
2012-11-23 2:30 ` Kukjin Kim
2012-11-25 2:54 ` Romain Naour
2012-11-25 11:09 ` Tomasz Figa
2012-11-27 23:27 ` [PATCH 1/3] Rename s5p-time to samsung-time Romain Naour
2012-11-27 23:57 ` Heiko Stübner
2012-11-29 23:18 ` Romain Naour
2012-11-29 23:59 ` Heiko Stübner
2012-12-02 19:43 ` [PATCH 0/5 v2] S3C / S5PC100: add clockevent/clocksource support Romain Naour
2012-12-02 19:44 ` [PATCH 1/5 v2] Rename s5p-time to samsung-time Romain Naour
2012-12-10 12:59 ` Heiko Stübner
2012-12-15 21:43 ` Romain Naour
2013-01-08 21:00 ` Tomasz Figa
2013-01-09 19:26 ` Kukjin Kim
2013-01-09 22:43 ` Romain Naour
2013-01-09 22:43 ` [PATCH 0/5 v3] S3C / S5PC100: add clockevent/clocksource support Romain Naour
2013-01-10 0:14 ` Tomasz Figa
2013-01-10 0:38 ` Kukjin Kim
2013-01-10 0:37 ` Heiko Stübner
2013-01-10 0:48 ` Kukjin Kim
2013-01-09 22:43 ` [PATCH 1/5 v3] Rename s5p-time to samsung-time Romain Naour
2013-01-09 22:43 ` Romain Naour [this message]
2013-01-10 3:03 ` [PATCH 2/5 v3] Add samsung-time support for s3c24xx Kukjin Kim
2013-01-09 22:44 ` [PATCH 3/5 v3] Add samsung-time support for s3c64xx Romain Naour
2013-01-09 22:44 ` [PATCH 4/5 v3] Add samsung-time support for s5pc100 Romain Naour
2013-01-09 22:44 ` [PATCH 5/5 v3] Remove unused plat-samsung/time.c Romain Naour
2012-12-02 19:44 ` [PATCH 2/5 v2] Add samsung-time support for s3c24xx Romain Naour
2012-12-10 13:00 ` Heiko Stübner
2012-12-15 21:40 ` Romain Naour
2012-12-02 19:44 ` [PATCH 3/5 v2] Add samsung-time support for s3c64xx Romain Naour
2012-12-02 19:44 ` [PATCH 4/5 v2] Add samsung-time support for s5pc100 Romain Naour
2012-12-02 19:44 ` [PATCH 5/5 v2] Remove unused plat-samsung/time.c Romain Naour
2012-12-10 12:57 ` Heiko Stübner
2012-12-15 21:40 ` Romain Naour
2012-12-15 21:40 ` [PATCH 5/5 v3] " Romain Naour
2012-11-27 23:27 ` [PATCH 2/3] Add samsung-time support for s3c24xx Romain Naour
2012-11-27 23:27 ` [PATCH 3/3] Add samsung-time support for s3c64xx Romain Naour
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50EDF2AC.6070203@openwide.fr \
--to=romain.naour@openwide.fr \
--cc=ben-linux@fluff.org \
--cc=heiko@sntech.de \
--cc=kgene.kim@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=sylvester.nawrocki@gmail.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox