* [PATCHv3 0/7] Support new Exynos3250 SoC based on Cortex-A7 dual core
@ 2014-04-18 1:15 Chanwoo Choi
2014-04-18 1:15 ` [PATCHv3 1/7] ARM: EXYNOS: Add Exynos3250 SoC ID Chanwoo Choi
` (6 more replies)
0 siblings, 7 replies; 9+ messages in thread
From: Chanwoo Choi @ 2014-04-18 1:15 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ, ben-linux-elnMNo+KYs3YtjvyW6yDsg,
kgene.kim-Sze3O3UU22JBDgjK7y7TUQ, t.figa-Sze3O3UU22JBDgjK7y7TUQ,
arnd-r2nGTMty4D4, olof-nZhT3qVonbNeoWH0uzbU5w,
marc.zyngier-5wv7dgnIgG8, thomas.abraham-QSEj5FYQhm4dnm+yROfE0A,
kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ,
cw00.choi-Sze3O3UU22JBDgjK7y7TUQ,
sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ,
hyunhee.kim-Sze3O3UU22JBDgjK7y7TUQ,
yj44.cho-Sze3O3UU22JBDgjK7y7TUQ,
chanho61.park-Sze3O3UU22JBDgjK7y7TUQ,
sajjan.linux-Re5JQEeQqe8AvxtiuMwx3w,
tushar.behera-QSEj5FYQhm4dnm+yROfE0A,
sachin.kamat-QSEj5FYQhm4dnm+yROfE0A,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA
This patchset support new Exynos3250 Samsung SoC based on Cortex-A7 dual core.
Exynos3250 is a System-On-Chip (SoC) that is based on 32-bit RISC processor
for Smartphone. It is desigend with the 28nm low-power high-K metal gate process
and provides the best performance features.
This patchset include some patches such as:
- Support secondary CPU of Exynos3250 (cpu up/down)
- Supoort uart/mct/adc/gic/i2c/spi/power-domain/pmu/mshc/pwm/amba
- Support the clock control for Exynos3250 using common clk framework
This patchset is based on following git repo/branch.
- git repo : git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
- branch : for-next (Linux 3.15-rc1)
Additional patch description about static memory mapping:
This patchset must need to map memory mapping about SYSRAM/PMU for CPU UP/DOWN.
So, this patchset need to merge following patchset to remove static memory
mapping for SYSRAM[1] / PMU ([2] or [3]).
[1] http://www.spinics.net/lists/arm-kernel/msg323011.html
[2] https://lkml.org/lkml/2014/4/2/48
[3] http://www.spinics.net/lists/arm-kernel/msg316013.html
And,
The pinctrl patch for Exynos3250 was posted as separated patch[4].
[4] https://lkml.org/lkml/2014/4/13/156
Changes from v2:
- Remove static memory mapping about SYSRAM/PMU such as following patches:
ARM: EXYNOS: Add IO mapping for non-secure SYSRAM of Exynos3250
ARM: EXYNOS: Add IO mapping for PMU of Exynos3250
- Add description for secondary CPU boot of Exynos4212/Exynos3250
- Fix description in exynos_cpu_die() to remove particular SoC series
- Fix minor coding style
- Add documentation for Exynos3250 clock controller
Changes from v1:
- Add new "samsung,exynos3" compatible name
- Add comment about exynos_cpu_boot in Exynos4212
- Remove unnecessary 'goto' statement in firmware.c
- Use read_cpuid_part_number() function instead of assembler directly
- Post separated pinctrl patch from this patchset
: https://lkml.org/lkml/2014/4/13/156
- Remove unused pmu interrupts due to Exynos3250 dual-core
- Cosolidate all the patches related to exynos3250.dtsi into one patch
- Fix gic compatible name to "cortex-a15-gic" because Cortex-A7 GIC is same
- Add sign-off of sender to all this patches
- Fix minor typo
Chanwoo Choi (4):
ARM: EXYNOS: Add Exynos3250 SoC ID
ARM: EXYNOS: Support secondary CPU boot of Exynos3250
ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7
dt-bindings: add documentation for Exynos3250 clock controller
Kyungmin Park (1):
ARM: EXYNOS: Support secondary CPU boot of Exynos4212
Tomasz Figa (2):
clk: samsung: exynos3250: Add clocks using common clock framework
ARM: dts: Add device tree sources for Exynos3250
.../devicetree/bindings/clock/exynos3250-clock.txt | 41 ++
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 477 +++++++++++++
arch/arm/boot/dts/exynos3250.dtsi | 427 +++++++++++
arch/arm/mach-exynos/Kconfig | 22 +
arch/arm/mach-exynos/exynos.c | 2 +
arch/arm/mach-exynos/firmware.c | 21 +-
arch/arm/mach-exynos/hotplug.c | 19 +-
arch/arm/plat-samsung/include/plat/cpu.h | 10 +
drivers/clk/samsung/Makefile | 1 +
drivers/clk/samsung/clk-exynos3250.c | 785 +++++++++++++++++++++
include/dt-bindings/clock/exynos3250.h | 256 +++++++
11 files changed, 2053 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/exynos3250-clock.txt
create mode 100644 arch/arm/boot/dts/exynos3250-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/exynos3250.dtsi
create mode 100644 drivers/clk/samsung/clk-exynos3250.c
create mode 100644 include/dt-bindings/clock/exynos3250.h
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCHv3 1/7] ARM: EXYNOS: Add Exynos3250 SoC ID 2014-04-18 1:15 [PATCHv3 0/7] Support new Exynos3250 SoC based on Cortex-A7 dual core Chanwoo Choi @ 2014-04-18 1:15 ` Chanwoo Choi 2014-04-18 1:15 ` [PATCHv3 2/7] ARM: EXYNOS: Support secondary CPU boot of Exynos4212 Chanwoo Choi ` (5 subsequent siblings) 6 siblings, 0 replies; 9+ messages in thread From: Chanwoo Choi @ 2014-04-18 1:15 UTC (permalink / raw) To: linux-kernel Cc: linux, ben-linux, kgene.kim, t.figa, arnd, olof, marc.zyngier, thomas.abraham, kyungmin.park, cw00.choi, sw0312.kim, hyunhee.kim, yj44.cho, chanho61.park, sajjan.linux, tushar.behera, sachin.kamat, linux-samsung-soc, linux-arm-kernel, devicetree This patch add Exynos3250's SoC ID. Exynos 3250 is System-On-Chip(SoC) that is based on the 32-bit RISC processor for Smartphone. Exynos3250 uses Cortex-A7 dual cores and has a target speed of 1.0GHz. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> --- arch/arm/mach-exynos/Kconfig | 22 ++++++++++++++++++++++ arch/arm/mach-exynos/exynos.c | 2 ++ arch/arm/plat-samsung/include/plat/cpu.h | 10 ++++++++++ 3 files changed, 34 insertions(+) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index fc8bf18..6da8a68 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -11,6 +11,17 @@ if ARCH_EXYNOS menu "SAMSUNG EXYNOS SoCs Support" +config ARCH_EXYNOS3 + bool "SAMSUNG EXYNOS3" + select ARM_AMBA + select CLKSRC_OF + select HAVE_ARM_SCU if SMP + select HAVE_SMP + select PINCTRL + select PM_GENERIC_DOMAINS if PM_RUNTIME + help + Samsung EXYNOS3 SoCs based systems + config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" default y @@ -41,6 +52,17 @@ config ARCH_EXYNOS5 comment "EXYNOS SoCs" +config SOC_EXYNOS3250 + bool "SAMSUNG EXYNOS3250" + default y + depends on ARCH_EXYNOS3 + select ARCH_HAS_BANDGAP + select ARM_CPU_SUSPEND if PM + select PINCTRL_EXYNOS + select SAMSUNG_DMADEV + help + Enable EXYNOS3250 CPU support + config CPU_EXYNOS4210 bool "SAMSUNG EXYNOS4210" default y diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 6a5fe18..e7dc6fd 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -346,6 +346,8 @@ static void __init exynos_dt_machine_init(void) } static char const *exynos_dt_compat[] __initconst = { + "samsung,exynos3", + "samsung,exynos3250", "samsung,exynos4", "samsung,exynos4210", "samsung,exynos4212", diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 5992b8d..3d808f6b 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -43,6 +43,9 @@ extern unsigned long samsung_cpu_id; #define S5PV210_CPU_ID 0x43110000 #define S5PV210_CPU_MASK 0xFFFFF000 +#define EXYNOS3250_SOC_ID 0xE3472000 +#define EXYNOS3_SOC_MASK 0xFFFFF000 + #define EXYNOS4210_CPU_ID 0x43210000 #define EXYNOS4212_CPU_ID 0x43220000 #define EXYNOS4412_CPU_ID 0xE4412200 @@ -68,6 +71,7 @@ IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK) IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK) IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK) IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK) +IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK) IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) @@ -126,6 +130,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_s5pv210() 0 #endif +#if defined(CONFIG_SOC_EXYNOS3250) +# define soc_is_exynos3250() is_samsung_exynos3250() +#else +# define soc_is_exynos3250() 0 +#endif + #if defined(CONFIG_CPU_EXYNOS4210) # define soc_is_exynos4210() is_samsung_exynos4210() #else -- 1.8.0 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCHv3 2/7] ARM: EXYNOS: Support secondary CPU boot of Exynos4212 2014-04-18 1:15 [PATCHv3 0/7] Support new Exynos3250 SoC based on Cortex-A7 dual core Chanwoo Choi 2014-04-18 1:15 ` [PATCHv3 1/7] ARM: EXYNOS: Add Exynos3250 SoC ID Chanwoo Choi @ 2014-04-18 1:15 ` Chanwoo Choi 2014-04-18 1:15 ` [PATCHv3 3/7] ARM: EXYNOS: Support secondary CPU boot of Exynos3250 Chanwoo Choi ` (4 subsequent siblings) 6 siblings, 0 replies; 9+ messages in thread From: Chanwoo Choi @ 2014-04-18 1:15 UTC (permalink / raw) To: linux-kernel Cc: linux, ben-linux, kgene.kim, t.figa, arnd, olof, marc.zyngier, thomas.abraham, kyungmin.park, cw00.choi, sw0312.kim, hyunhee.kim, yj44.cho, chanho61.park, sajjan.linux, tushar.behera, sachin.kamat, linux-samsung-soc, linux-arm-kernel, devicetree From: Kyungmin Park <kyungmin.park@samsung.com> This patch fix the offset of CPU boot address and change parameter of smc call of SMC_CMD_CPU1BOOT command for Exynos4212. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> --- arch/arm/mach-exynos/firmware.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 932129e..aa01c42 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -18,6 +18,8 @@ #include <mach/map.h> +#include <plat/cpu.h> + #include "smc.h" static int exynos_do_idle(void) @@ -28,13 +30,24 @@ static int exynos_do_idle(void) static int exynos_cpu_boot(int cpu) { + /* + * The second parameter of SMC_CMD_CPU1BOOT command means CPU id. + * But, Exynos4212 has only one secondary CPU so second parameter + * isn't used for informing secure firmware about CPU id. + */ + if (soc_is_exynos4212()) + cpu = 0; + exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0); return 0; } static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) { - void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu; + void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c; + + if (!soc_is_exynos4212()) + boot_reg += 4*cpu; __raw_writel(boot_addr, boot_reg); return 0; -- 1.8.0 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCHv3 3/7] ARM: EXYNOS: Support secondary CPU boot of Exynos3250 2014-04-18 1:15 [PATCHv3 0/7] Support new Exynos3250 SoC based on Cortex-A7 dual core Chanwoo Choi 2014-04-18 1:15 ` [PATCHv3 1/7] ARM: EXYNOS: Add Exynos3250 SoC ID Chanwoo Choi 2014-04-18 1:15 ` [PATCHv3 2/7] ARM: EXYNOS: Support secondary CPU boot of Exynos4212 Chanwoo Choi @ 2014-04-18 1:15 ` Chanwoo Choi 2014-04-18 1:15 ` [PATCHv3 4/7] ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7 Chanwoo Choi ` (3 subsequent siblings) 6 siblings, 0 replies; 9+ messages in thread From: Chanwoo Choi @ 2014-04-18 1:15 UTC (permalink / raw) To: linux-kernel Cc: linux, ben-linux, kgene.kim, t.figa, arnd, olof, marc.zyngier, thomas.abraham, kyungmin.park, cw00.choi, sw0312.kim, hyunhee.kim, yj44.cho, chanho61.park, sajjan.linux, tushar.behera, sachin.kamat, linux-samsung-soc, linux-arm-kernel, devicetree This patch fix the offset of CPU boot address and don't need to send smc call of SMC_CMD_CPU1BOOT command for secondary CPU boot because Exynos3250 removes WFE in secure mode. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> --- arch/arm/mach-exynos/firmware.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index aa01c42..386d01d 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -31,11 +31,17 @@ static int exynos_do_idle(void) static int exynos_cpu_boot(int cpu) { /* + * Exynos3250 doesn't need to send smc command for secondary CPU boot + * because Exynos3250 removes WFE in secure mode. + */ + if (soc_is_exynos3250()) + return 0; + /* * The second parameter of SMC_CMD_CPU1BOOT command means CPU id. * But, Exynos4212 has only one secondary CPU so second parameter * isn't used for informing secure firmware about CPU id. */ - if (soc_is_exynos4212()) + else if (soc_is_exynos4212()) cpu = 0; exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0); @@ -46,7 +52,7 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) { void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c; - if (!soc_is_exynos4212()) + if (!soc_is_exynos4212() && !soc_is_exynos3250()) boot_reg += 4*cpu; __raw_writel(boot_addr, boot_reg); -- 1.8.0 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCHv3 4/7] ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7 2014-04-18 1:15 [PATCHv3 0/7] Support new Exynos3250 SoC based on Cortex-A7 dual core Chanwoo Choi ` (2 preceding siblings ...) 2014-04-18 1:15 ` [PATCHv3 3/7] ARM: EXYNOS: Support secondary CPU boot of Exynos3250 Chanwoo Choi @ 2014-04-18 1:15 ` Chanwoo Choi 2014-04-18 1:15 ` [PATCHv3 5/7] clk: samsung: exynos3250: Add clocks using common clock framework Chanwoo Choi ` (2 subsequent siblings) 6 siblings, 0 replies; 9+ messages in thread From: Chanwoo Choi @ 2014-04-18 1:15 UTC (permalink / raw) To: linux-kernel Cc: linux, ben-linux, kgene.kim, t.figa, arnd, olof, marc.zyngier, thomas.abraham, kyungmin.park, cw00.choi, sw0312.kim, hyunhee.kim, yj44.cho, chanho61.park, sajjan.linux, tushar.behera, sachin.kamat, linux-samsung-soc, linux-arm-kernel, devicetree This patch decide proper lowpower mode of either a15 or a9 according to own ID from Main ID register. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zynigier <marc.zyngier@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> --- arch/arm/mach-exynos/hotplug.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index 5eead53..acf3119 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -135,16 +135,21 @@ void __ref exynos_cpu_die(unsigned int cpu) int primary_part = 0; /* - * we're ready for shutdown now, so do it. - * Exynos4 is A9 based while Exynos5 is A15; check the CPU part - * number by reading the Main ID register and then perform the - * appropriate sequence for entering low power. + * Prepare the CPU for shutting down. The required sequence of + * operations depends on core type. CPUID part number can be used to + * determine the right way. */ - asm("mrc p15, 0, %0, c0, c0, 0" : "=r"(primary_part) : : "cc"); - if ((primary_part & 0xfff0) == 0xc0f0) + primary_part = read_cpuid_part_number(); + + switch (primary_part) { + case ARM_CPU_PART_CORTEX_A7: + case ARM_CPU_PART_CORTEX_A15: cpu_enter_lowpower_a15(); - else + break; + default: cpu_enter_lowpower_a9(); + break; + } platform_do_lowpower(cpu, &spurious); -- 1.8.0 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCHv3 5/7] clk: samsung: exynos3250: Add clocks using common clock framework 2014-04-18 1:15 [PATCHv3 0/7] Support new Exynos3250 SoC based on Cortex-A7 dual core Chanwoo Choi ` (3 preceding siblings ...) 2014-04-18 1:15 ` [PATCHv3 4/7] ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7 Chanwoo Choi @ 2014-04-18 1:15 ` Chanwoo Choi [not found] ` <1397783728-6193-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> 2014-04-21 1:10 ` [PATCHv3 0/7] Support new Exynos3250 SoC based on Cortex-A7 dual core Chanwoo Choi 6 siblings, 0 replies; 9+ messages in thread From: Chanwoo Choi @ 2014-04-18 1:15 UTC (permalink / raw) To: linux-kernel Cc: linux, ben-linux, kgene.kim, t.figa, arnd, olof, marc.zyngier, thomas.abraham, kyungmin.park, cw00.choi, sw0312.kim, hyunhee.kim, yj44.cho, chanho61.park, sajjan.linux, tushar.behera, sachin.kamat, linux-samsung-soc, linux-arm-kernel, devicetree, Mike Turquette, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Sylwester Nawrocki, Inki Dae, Jaehoon Chung, Karol Wrona From: Tomasz Figa <t.figa@samsung.com> This patch add new the clock drvier of Exynos3250 SoC based on Cortex-A7 using common clock framework. The CMU (Clock Management Unit) of Exynos3250 control PLLs(Phase Locked Loops) and generate system clocks for CPU, buses, and function clocks for individual IPs. The CMU of Exynos3250 includes following clock doamins: - CPU block for Cortex-A7 MPCore processor - LEFTBUS/RIGHTBUS block - TOP block for G3D/MFC/LCD0/ISP/CAM/FSYS/MFC/PERIL/PERIR Cc: Mike Turquette <mturquette@linaro.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Hyunhee Kim <hyunhee.kim@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Karol Wrona <k.wrona@samsung.com> Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> --- drivers/clk/samsung/Makefile | 1 + drivers/clk/samsung/clk-exynos3250.c | 785 +++++++++++++++++++++++++++++++++ include/dt-bindings/clock/exynos3250.h | 256 +++++++++++ 3 files changed, 1042 insertions(+) create mode 100644 drivers/clk/samsung/clk-exynos3250.c create mode 100644 include/dt-bindings/clock/exynos3250.h diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index 8eb4799..d120797 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o +obj-$(CONFIG_SOC_EXYNOS3250) += clk-exynos3250.o obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c new file mode 100644 index 0000000..0574a76 --- /dev/null +++ b/drivers/clk/samsung/clk-exynos3250.c @@ -0,0 +1,785 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for Exynos3250 SoC. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/syscore_ops.h> + +#include <dt-bindings/clock/exynos3250.h> + +#include "clk.h" +#include "clk-pll.h" + +#define SRC_LEFTBUS 0x4200 +#define DIV_LEFTBUS 0x4500 +#define GATE_IP_LEFTBUS 0x4800 +#define SRC_RIGHTBUS 0x8200 +#define DIV_RIGHTBUS 0x8500 +#define GATE_IP_RIGHTBUS 0x8800 +#define GATE_IP_PERIR 0x8960 +#define MPLL_LOCK 0xc010 +#define MPLL_CON0 0xc110 +#define VPLL_LOCK 0xc020 +#define VPLL_CON0 0xc120 +#define UPLL_LOCK 0xc030 +#define UPLL_CON0 0xc130 +#define SRC_TOP0 0xc210 +#define SRC_TOP1 0xc214 +#define SRC_CAM 0xc220 +#define SRC_MFC 0xc228 +#define SRC_G3D 0xc22c +#define SRC_LCD 0xc234 +#define SRC_ISP 0xc238 +#define SRC_FSYS 0xc240 +#define SRC_PERIL0 0xc250 +#define SRC_PERIL1 0xc254 +#define SRC_MASK_TOP 0xc310 +#define SRC_MASK_CAM 0xc320 +#define SRC_MASK_LCD 0xc334 +#define SRC_MASK_ISP 0xc338 +#define SRC_MASK_FSYS 0xc340 +#define SRC_MASK_PERIL0 0xc350 +#define SRC_MASK_PERIL1 0xc354 +#define DIV_TOP 0xc510 +#define DIV_CAM 0xc520 +#define DIV_MFC 0xc528 +#define DIV_G3D 0xc52c +#define DIV_LCD 0xc534 +#define DIV_ISP 0xc538 +#define DIV_FSYS0 0xc540 +#define DIV_FSYS1 0xc544 +#define DIV_FSYS2 0xc548 +#define DIV_PERIL0 0xc550 +#define DIV_PERIL1 0xc554 +#define DIV_PERIL3 0xc55c +#define DIV_PERIL4 0xc560 +#define DIV_PERIL5 0xc564 +#define DIV_CAM1 0xc568 +#define CLKDIV2_RATIO 0xc580 +#define GATE_SCLK_CAM 0xc820 +#define GATE_SCLK_MFC 0xc828 +#define GATE_SCLK_G3D 0xc82c +#define GATE_SCLK_LCD 0xc834 +#define GATE_SCLK_ISP_TOP 0xc838 +#define GATE_SCLK_FSYS 0xc840 +#define GATE_SCLK_PERIL 0xc850 +#define GATE_IP_CAM 0xc920 +#define GATE_IP_MFC 0xc928 +#define GATE_IP_G3D 0xc92c +#define GATE_IP_LCD 0xc934 +#define GATE_IP_ISP 0xc938 +#define GATE_IP_FSYS 0xc940 +#define GATE_IP_PERIL 0xc950 +#define GATE_BLOCK 0xc970 +#define APLL_LOCK 0x14000 +#define APLL_CON0 0x14100 +#define SRC_CPU 0x14200 +#define DIV_CPU0 0x14500 +#define DIV_CPU1 0x14504 + +/* list of PLLs to be registered */ +enum exynos3250_plls { + apll, mpll, vpll, upll, + nr_plls +}; + +void __iomem *reg_base; + +/* + * Support for CMU save/restore across system suspends + */ +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *exynos3250_clk_regs; + +static unsigned long exynos3250_cmu_clk_regs[] __initdata = { + SRC_LEFTBUS, + DIV_LEFTBUS, + GATE_IP_LEFTBUS, + SRC_RIGHTBUS, + DIV_RIGHTBUS, + GATE_IP_RIGHTBUS, + GATE_IP_PERIR, + MPLL_LOCK, + MPLL_CON0, + VPLL_LOCK, + VPLL_CON0, + UPLL_LOCK, + UPLL_CON0, + SRC_TOP0, + SRC_TOP1, + SRC_CAM, + SRC_MFC, + SRC_G3D, + SRC_LCD, + SRC_ISP, + SRC_FSYS, + SRC_PERIL0, + SRC_PERIL1, + SRC_MASK_TOP, + SRC_MASK_CAM, + SRC_MASK_LCD, + SRC_MASK_ISP, + SRC_MASK_FSYS, + SRC_MASK_PERIL0, + SRC_MASK_PERIL1, + DIV_TOP, + DIV_CAM, + DIV_MFC, + DIV_G3D, + DIV_LCD, + DIV_ISP, + DIV_FSYS0, + DIV_FSYS1, + DIV_FSYS2, + DIV_PERIL0, + DIV_PERIL1, + DIV_PERIL3, + DIV_PERIL4, + DIV_PERIL5, + DIV_CAM1, + CLKDIV2_RATIO, + GATE_SCLK_CAM, + GATE_SCLK_MFC, + GATE_SCLK_G3D, + GATE_SCLK_LCD, + GATE_SCLK_ISP_TOP, + GATE_SCLK_FSYS, + GATE_SCLK_PERIL, + GATE_IP_CAM, + GATE_IP_MFC, + GATE_IP_G3D, + GATE_IP_LCD, + GATE_IP_ISP, + GATE_IP_FSYS, + GATE_IP_PERIL, + GATE_BLOCK, + APLL_LOCK, + SRC_CPU, + DIV_CPU0, + DIV_CPU1, +}; + +static int exynos3250_clk_suspend(void) +{ + samsung_clk_save(reg_base, exynos3250_clk_regs, + ARRAY_SIZE(exynos3250_cmu_clk_regs)); + return 0; +} + +static void exynos3250_clk_resume(void) +{ + samsung_clk_restore(reg_base, exynos3250_clk_regs, + ARRAY_SIZE(exynos3250_cmu_clk_regs)); +} + +static struct syscore_ops exynos3250_clk_syscore_ops = { + .suspend = exynos3250_clk_suspend, + .resume = exynos3250_clk_resume, +}; + +static void exynos3250_clk_sleep_init(void) +{ + exynos3250_clk_regs = + samsung_clk_alloc_reg_dump(exynos3250_cmu_clk_regs, + ARRAY_SIZE(exynos3250_cmu_clk_regs)); + if (!exynos3250_clk_regs) { + pr_warn("%s: Failed to allocate sleep save data\n", __func__); + goto err; + } + + register_syscore_ops(&exynos3250_clk_syscore_ops); + return; +err: + kfree(exynos3250_clk_regs); +} +#else +static inline void exynos3250_clk_sleep_init(void) { } +#endif + +/* list of all parent clock list */ +PNAME(mout_vpllsrc_p) = { "fin_pll", }; + +PNAME(mout_apll_p) = { "fin_pll", "fout_apll", }; +PNAME(mout_mpll_p) = { "fin_pll", "fout_mpll", }; +PNAME(mout_vpll_p) = { "fin_pll", "fout_vpll", }; +PNAME(mout_upll_p) = { "fin_pll", "fout_upll", }; + +PNAME(mout_mpll_user_p) = { "fin_pll", "div_mpll_pre", }; +PNAME(mout_epll_user_p) = { "fin_pll", "mout_epll", }; +PNAME(mout_core_p) = { "mout_apll", "mout_mpll_user_c", }; +PNAME(mout_hpm_p) = { "mout_apll", "mout_mpll_user_c", }; + +PNAME(mout_ebi_p) = { "div_aclk_200", "div_aclk_160", }; +PNAME(mout_ebi_1_p) = { "mout_ebi", "mout_vpll", }; + +PNAME(mout_gdl_p) = { "mout_mpll_user_l", }; +PNAME(mout_gdr_p) = { "mout_mpll_user_r", }; + +PNAME(mout_aclk_400_mcuisp_sub_p) + = { "fin_pll", "div_aclk_400_mcuisp", }; +PNAME(mout_aclk_266_0_p) = { "div_mpll_pre", "mout_vpll", }; +PNAME(mout_aclk_266_1_p) = { "mout_epll_user", }; +PNAME(mout_aclk_266_p) = { "mout_aclk_266_0", "mout_aclk_266_1", }; +PNAME(mout_aclk_266_sub_p) = { "fin_pll", "div_aclk_266", }; + +PNAME(group_div_mpll_pre_p) = { "div_mpll_pre", }; +PNAME(group_epll_vpll_p) = { "mout_epll_user", "mout_vpll" }; +PNAME(group_sclk_p) = { "xxti", "xusbxti", + "none", "none", + "none", "none", "div_mpll_pre", + "mout_epll_user", "mout_vpll", }; +PNAME(group_sclk_audio_p) = { "audiocdclk", "none", + "none", "none", + "xxti", "xusbxti", + "div_mpll_pre", "mout_epll_user", + "mout_vpll", }; +PNAME(group_sclk_cam_blk_p) = { "xxti", "xusbxti", + "none", "none", "none", + "none", "div_mpll_pre", + "mout_epll_user", "mout_vpll", + "div_cam_blk_320", }; +PNAME(group_sclk_fimd0_p) = { "xxti", "xusbxti", + "m_bitclkhsdiv4_2l", "none", + "none", "none", "div_mpll_pre", + "mout_epll_user", "mout_vpll", + "none", "none", "none", + "div_lcd_blk_145", }; + +PNAME(mout_mfc_p) = { "mout_mfc_0", "mout_mfc_1" }; +PNAME(mout_g3d_p) = { "mout_g3d_0", "mout_g3d_1" }; + +static struct samsung_fixed_rate_clock fixed_rate_clks[] __initdata = { +}; + +static struct samsung_fixed_factor_clock fixed_factor_clks[] __initdata = { + FFACTOR(0, "sclk_mpll_1600", "mout_mpll", 1, 1, 0), + FFACTOR(0, "sclk_mpll_mif", "mout_mpll", 1, 2, 0), + FFACTOR(0, "sclk_bpll", "fout_bpll", 1, 2, 0), + FFACTOR(0, "div_cam_blk_320", "sclk_mpll_1600", 1, 5, 0), + FFACTOR(0, "div_lcd_blk_145", "sclk_mpll_1600", 1, 11, 0), + + FFACTOR(CLK_FIN_PLL, "fin_pll", "xusbxti", 1, 1, 0), +}; + +static struct samsung_mux_clock mux_clks[] __initdata = { + /* + * NOTE: Following table is sorted by register address in ascending + * order and then bitfield shift in descending order, as it is done + * in the User's Manual. When adding new entries, please make sure + * that the order is preserved, to avoid merge conflicts and make + * further work with defined data easier. + */ + + /* SRC_LEFTBUS */ + MUX(CLK_MOUT_MPLL_USER_L, "mout_mpll_user_l", mout_mpll_user_p, + SRC_LEFTBUS, 4, 1), + MUX(CLK_MOUT_GDL, "mout_gdl", mout_gdl_p, SRC_LEFTBUS, 0, 1), + + /* SRC_RIGHTBUS */ + MUX(CLK_MOUT_MPLL_USER_R, "mout_mpll_user_r", mout_mpll_user_p, + SRC_RIGHTBUS, 4, 1), + MUX(CLK_MOUT_GDR, "mout_gdr", mout_gdr_p, SRC_RIGHTBUS, 0, 1), + + /* SRC_TOP0 */ + MUX(CLK_MOUT_EBI, "mout_ebi", mout_ebi_p, SRC_TOP0, 28, 1), + MUX(CLK_MOUT_ACLK_200, "mout_aclk_200", group_div_mpll_pre_p,SRC_TOP0, 24, 1), + MUX(CLK_MOUT_ACLK_160, "mout_aclk_160", group_div_mpll_pre_p, SRC_TOP0, 20, 1), + MUX(CLK_MOUT_ACLK_100, "mout_aclk_100", group_div_mpll_pre_p, SRC_TOP0, 16, 1), + MUX(CLK_MOUT_ACLK_266_1, "mout_aclk_266_1", mout_aclk_266_1_p, SRC_TOP0, 14, 1), + MUX(CLK_MOUT_ACLK_266_0, "mout_aclk_266_0", mout_aclk_266_0_p, SRC_TOP0, 13, 1), + MUX(CLK_MOUT_ACLK_266, "mout_aclk_266", mout_aclk_266_p, SRC_TOP0, 12, 1), + MUX(CLK_MOUT_VPLL, "mout_vpll", mout_vpll_p, SRC_TOP0, 8, 1), + MUX(CLK_MOUT_EPLL_USER, "mout_epll_user", mout_epll_user_p, SRC_TOP0, 4, 1), + MUX(CLK_MOUT_EBI_1, "mout_ebi_1", mout_ebi_1_p, SRC_TOP0, 0, 1), + + /* SRC_TOP1 */ + MUX(CLK_MOUT_UPLL, "mout_upll", mout_upll_p, SRC_TOP1, 28, 1), + MUX(CLK_MOUT_ACLK_400_MCUISP_SUB, "mout_aclk_400_mcuisp_sub", mout_aclk_400_mcuisp_sub_p, + SRC_TOP1, 24, 1), + MUX(CLK_MOUT_ACLK_266_SUB, "mout_aclk_266_sub", mout_aclk_266_sub_p, SRC_TOP1, 20, 1), + MUX(CLK_MOUT_MPLL, "mout_mpll", mout_mpll_p, SRC_TOP1, 12, 1), + MUX(CLK_MOUT_ACLK_400_MCUISP, "mout_aclk_400_mcuisp", group_div_mpll_pre_p, SRC_TOP1, 8, 1), + MUX(CLK_MOUT_VPLLSRC, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP1, 0, 1), + + /* SRC_CAM */ + MUX(CLK_MOUT_CAM1, "mout_cam1", group_sclk_p, SRC_CAM, 20, 4), + MUX(CLK_MOUT_CAM_BLK, "mout_cam_blk", group_sclk_cam_blk_p, SRC_CAM, 0, 4), + + /* SRC_MFC */ + MUX(CLK_MOUT_MFC, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1), + MUX(CLK_MOUT_MFC_1, "mout_mfc_1", group_epll_vpll_p, SRC_MFC, 4, 1), + MUX(CLK_MOUT_MFC_0, "mout_mfc_0", group_div_mpll_pre_p, SRC_MFC, 0, 1), + + /* SRC_G3D */ + MUX(CLK_MOUT_G3D, "mout_g3d", mout_g3d_p, SRC_G3D, 8, 1), + MUX(CLK_MOUT_G3D_1, "mout_g3d_1", group_epll_vpll_p, SRC_G3D, 4, 1), + MUX(CLK_MOUT_G3D_0, "mout_g3d_0", group_div_mpll_pre_p, SRC_G3D, 0, 1), + + /* SRC_LCD */ + MUX(CLK_MOUT_MIPI0, "mout_mipi0", group_sclk_p, SRC_LCD, 12, 4), + MUX(CLK_MOUT_FIMD0, "mout_fimd0", group_sclk_fimd0_p, SRC_LCD, 0, 4), + + /* SRC_ISP */ + MUX(CLK_MOUT_UART_ISP, "mout_uart_isp", group_sclk_p, SRC_ISP, 12, 4), + MUX(CLK_MOUT_SPI1_ISP, "mout_spi1_isp", group_sclk_p, SRC_ISP, 8, 4), + MUX(CLK_MOUT_SPI0_ISP, "mout_spi0_isp", group_sclk_p, SRC_ISP, 4, 4), + + /* SRC_FSYS */ + MUX(CLK_MOUT_TSADC, "mout_tsadc", group_sclk_p, SRC_FSYS, 28, 4), + MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 3), + MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 3), + + /* SRC_PERIL0 */ + MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4), + MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4), + + /* SRC_PERIL1 */ + MUX(CLK_MOUT_SPI1, "mout_spi1", group_sclk_p, SRC_PERIL1, 20, 4), + MUX(CLK_MOUT_SPI0, "mout_spi0", group_sclk_p, SRC_PERIL1, 16, 4), + MUX(CLK_MOUT_AUDIO, "mout_audio", group_sclk_audio_p, SRC_PERIL1, 4, 4), + + /* SRC_CPU */ + MUX(CLK_MOUT_MPLL_USER_C, "mout_mpll_user_c", mout_mpll_user_p, + SRC_CPU, 24, 1), + MUX(CLK_MOUT_HPM, "mout_hpm", mout_hpm_p, SRC_CPU, 20, 1), + MUX(CLK_MOUT_CORE, "mout_core", mout_core_p, SRC_CPU, 16, 1), + MUX(CLK_MOUT_APLL, "mout_apll", mout_apll_p, SRC_CPU, 0, 1), +}; + +static struct samsung_div_clock div_clks[] __initdata = { + /* + * NOTE: Following table is sorted by register address in ascending + * order and then bitfield shift in descending order, as it is done + * in the User's Manual. When adding new entries, please make sure + * that the order is preserved, to avoid merge conflicts and make + * further work with defined data easier. + */ + + /* DIV_LEFTBUS */ + DIV(CLK_DIV_GPL, "div_gpl", "div_gdl", DIV_LEFTBUS, 4, 3), + DIV(CLK_DIV_GDL, "div_gdl", "mout_gdl", DIV_LEFTBUS, 0, 4), + + /* DIV_RIGHTBUS */ + DIV(CLK_DIV_GPR, "div_gpr", "div_gdr", DIV_RIGHTBUS, 4, 3), + DIV(CLK_DIV_GDR, "div_gdr", "mout_gdr", DIV_RIGHTBUS, 0, 4), + + /* DIV_TOP */ + DIV(CLK_DIV_MPLL_PRE, "div_mpll_pre", "sclk_mpll_mif", DIV_TOP, 28, 2), + DIV(CLK_DIV_ACLK_400_MCUISP, "div_aclk_400_mcuisp", + "mout_aclk_400_mcuisp", DIV_TOP, 24, 3), + DIV(CLK_DIV_EBI, "div_ebi", "mout_ebi_1", DIV_TOP, 16, 3), + DIV(CLK_DIV_ACLK_200, "div_aclk_200", "mout_aclk_200", DIV_TOP, 12, 3), + DIV(CLK_DIV_ACLK_160, "div_aclk_160", "mout_aclk_160", DIV_TOP, 8, 3), + DIV(CLK_DIV_ACLK_100, "div_aclk_100", "mout_aclk_100", DIV_TOP, 4, 4), + DIV(CLK_DIV_ACLK_266, "div_aclk_266", "mout_aclk_266", DIV_TOP, 0, 3), + + /* DIV_CAM */ + DIV(CLK_DIV_CAM1, "div_cam1", "mout_cam1", DIV_CAM, 20, 4), + DIV(CLK_DIV_CAM_BLK, "div_cam_blk", "mout_cam_blk", DIV_CAM, 0, 4), + + /* DIV_MFC */ + DIV(CLK_DIV_MFC, "div_mfc", "mout_mfc", DIV_MFC, 0, 4), + + /* DIV_G3D */ + DIV(CLK_DIV_G3D, "div_g3d", "mout_g3d", DIV_G3D, 0, 4), + + /* DIV_LCD */ + DIV_F(CLK_DIV_MIPI0_PRE, "div_mipi0_pre", "div_mipi0", DIV_LCD, 20, 4, + CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_MIPI0, "div_mipi0", "mout_mipi0", DIV_LCD, 16, 4), + DIV(CLK_DIV_FIMD0, "div_fimd0", "mout_fimd0", DIV_LCD, 0, 4), + + /* DIV_ISP */ + DIV(CLK_DIV_UART_ISP, "div_uart_isp", "mout_uart_isp", DIV_ISP, 28, 4), + DIV_F(CLK_DIV_SPI1_ISP_PRE, "div_spi1_isp_pre", "div_spi1_isp", + DIV_ISP, 20, 8, CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_SPI1_ISP, "div_spi1_isp", "mout_spi1_isp", DIV_ISP, 16, 4), + DIV_F(CLK_DIV_SPI0_ISP_PRE, "div_spi0_isp_pre", "div_spi0_isp", + DIV_ISP, 8, 8, CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_SPI0_ISP, "div_spi0_isp", "mout_spi0_isp", DIV_ISP, 0, 4), + + /* DIV_FSYS0 */ + DIV_F(CLK_DIV_TSADC_PRE, "div_tsadc_pre", "div_tsadc", DIV_FSYS0, 8, 8, + CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_TSADC, "div_tsadc", "mout_tsadc", DIV_FSYS0, 0, 4), + + /* DIV_FSYS1 */ + DIV_F(CLK_DIV_MMC1_PRE, "div_mmc1_pre", "div_mmc1", DIV_FSYS1, 24, 8, + CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_MMC1, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4), + DIV_F(CLK_DIV_MMC0_PRE, "div_mmc0_pre", "div_mmc0", DIV_FSYS1, 8, 8, + CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4), + + /* DIV_PERIL0 */ + DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4), + DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4), + + /* DIV_PERIL1 */ + DIV_F(CLK_DIV_SPI1_PRE, "div_spi1_pre", "div_spi1", DIV_PERIL1, 24, 8, + CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_SPI1, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4), + DIV_F(CLK_DIV_SPI0_PRE, "div_spi0_pre", "div_spi0", DIV_PERIL1, 8, 8, + CLK_SET_RATE_PARENT, 0), + DIV(CLK_DIV_SPI0, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4), + + /* DIV_PERIL4 */ + DIV(CLK_DIV_PCM, "div_pcm", "div_audio", DIV_PERIL4, 20, 8), + DIV(CLK_DIV_AUDIO, "div_audio", "mout_audio", DIV_PERIL4, 16, 4), + + /* DIV_PERIL5 */ + DIV(CLK_DIV_I2S, "div_i2s", "div_audio", DIV_PERIL5, 8, 6), + + /* DIV_CPU0 */ + DIV(CLK_DIV_CORE2, "div_core2", "div_core", DIV_CPU0, 28, 3), + DIV(CLK_DIV_APLL, "div_apll", "mout_apll", DIV_CPU0, 24, 3), + DIV(CLK_DIV_PCLK_DBG, "div_pclk_dbg", "div_core2", DIV_CPU0, 20, 3), + DIV(CLK_DIV_ATB, "div_atb", "div_core2", DIV_CPU0, 16, 3), + DIV(CLK_DIV_COREM, "div_corem", "div_core2", DIV_CPU0, 4, 3), + DIV(CLK_DIV_CORE, "div_core", "mout_core", DIV_CPU0, 0, 3), + + /* DIV_CPU1 */ + DIV(CLK_DIV_HPM, "div_hpm", "div_copy", DIV_CPU1, 4, 3), + DIV(CLK_DIV_COPY, "div_copy", "mout_hpm", DIV_CPU1, 0, 3), +}; + +static struct samsung_gate_clock gate_clks[] __initdata = { + /* + * NOTE: Following table is sorted by register address in ascending + * order and then bitfield shift in descending order, as it is done + * in the User's Manual. When adding new entries, please make sure + * that the order is preserved, to avoid merge conflicts and make + * further work with defined data easier. + */ + + /* GATE_IP_LEFTBUS */ + GATE(CLK_ASYNC_G3D, "async_g3d", "div_aclk_100", GATE_IP_LEFTBUS, 6, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_ASYNC_MFCL, "async_mfcl", "div_aclk_100", GATE_IP_LEFTBUS, 4, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PPMULEFT, "ppmuleft", "div_aclk_100", GATE_IP_LEFTBUS, 1, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_GPIO_LEFT, "gpio_left", "div_aclk_100", GATE_IP_LEFTBUS, 0, + CLK_IGNORE_UNUSED, 0), + + /* GATE_IP_RIGHTBUS */ + GATE(CLK_ASYNC_ISPMX, "async_ispmx", "div_aclk_100", + GATE_IP_RIGHTBUS, 9, CLK_IGNORE_UNUSED, 0), + GATE(CLK_ASYNC_FSYSD, "async_fsysd", "div_aclk_100", + GATE_IP_RIGHTBUS, 5, CLK_IGNORE_UNUSED, 0), + GATE(CLK_ASYNC_LCD0X, "async_lcd0x", "div_aclk_100", + GATE_IP_RIGHTBUS, 3, CLK_IGNORE_UNUSED, 0), + GATE(CLK_ASYNC_CAMX, "async_camx", "div_aclk_100", GATE_IP_RIGHTBUS, 2, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PPMURIGHT, "ppmuright", "div_aclk_100", GATE_IP_RIGHTBUS, 1, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_GPIO_RIGHT, "gpio_right", "div_aclk_100", GATE_IP_RIGHTBUS, 0, + CLK_IGNORE_UNUSED, 0), + + /* GATE_IP_PERIR */ + GATE(CLK_MONOCNT, "monocnt", "div_aclk_100", GATE_IP_PERIR, 22, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC6, "tzpc6", "div_aclk_100", GATE_IP_PERIR, 21, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PROVISIONKEY1, "provisionkey1", "div_aclk_100", + GATE_IP_PERIR, 20, CLK_IGNORE_UNUSED, 0), + GATE(CLK_PROVISIONKEY0, "provisionkey0", "div_aclk_100", + GATE_IP_PERIR, 19, CLK_IGNORE_UNUSED, 0), + GATE(CLK_CMU_ISPPART, "cmu_isppart", "div_aclk_100", GATE_IP_PERIR, 18, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TMU_APBIF, "tmu_apbif", "div_aclk_100", + GATE_IP_PERIR, 17, 0, 0), + GATE(CLK_KEYIF, "keyif", "div_aclk_100", GATE_IP_PERIR, 16, 0, 0), + GATE(CLK_RTC, "rtc", "div_aclk_100", GATE_IP_PERIR, 15, 0, 0), + GATE(CLK_WDT, "wdt", "div_aclk_100", GATE_IP_PERIR, 14, 0, 0), + GATE(CLK_MCT, "mct", "div_aclk_100", GATE_IP_PERIR, 13, 0, 0), + GATE(CLK_SECKEY, "seckey", "div_aclk_100", GATE_IP_PERIR, 12, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC5, "tzpc5", "div_aclk_100", GATE_IP_PERIR, 10, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC4, "tzpc4", "div_aclk_100", GATE_IP_PERIR, 9, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC3, "tzpc3", "div_aclk_100", GATE_IP_PERIR, 8, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC2, "tzpc2", "div_aclk_100", GATE_IP_PERIR, 7, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC1, "tzpc1", "div_aclk_100", GATE_IP_PERIR, 6, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_TZPC0, "tzpc0", "div_aclk_100", GATE_IP_PERIR, 5, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_CMU_COREPART, "cmu_corepart", "div_aclk_100", GATE_IP_PERIR, 4, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_CMU_TOPPART, "cmu_toppart", "div_aclk_100", GATE_IP_PERIR, 3, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PMU_APBIF, "pmu_apbif", "div_aclk_100", GATE_IP_PERIR, 2, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_SYSREG, "sysreg", "div_aclk_100", GATE_IP_PERIR, 1, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_CHIP_ID, "chip_id", "div_aclk_100", GATE_IP_PERIR, 0, + CLK_IGNORE_UNUSED, 0), + + /* GATE_SCLK_CAM */ + GATE(CLK_SCLK_JPEG, "sclk_jpeg", "div_cam_blk", + GATE_SCLK_CAM, 8, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_M2MSCALER, "sclk_m2mscaler", "div_cam_blk", + GATE_SCLK_CAM, 2, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_GSCALER1, "sclk_gscaler1", "div_cam_blk", + GATE_SCLK_CAM, 1, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_GSCALER0, "sclk_gscaler0", "div_cam_blk", + GATE_SCLK_CAM, 0, CLK_SET_RATE_PARENT, 0), + + /* GATE_SCLK_MFC */ + GATE(CLK_SCLK_MFC, "sclk_mfc", "div_mfc", + GATE_SCLK_MFC, 0, CLK_SET_RATE_PARENT, 0), + + /* GATE_SCLK_G3D */ + GATE(CLK_SCLK_G3D, "sclk_g3d", "div_g3d", + GATE_SCLK_G3D, 0, CLK_SET_RATE_PARENT, 0), + + /* GATE_SCLK_LCD */ + GATE(CLK_SCLK_MIPIDPHY2L, "sclk_mipidphy2l", "div_mipi0", + GATE_SCLK_LCD, 4, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_MIPI0, "sclk_mipi0", "div_mipi0_pre", + GATE_SCLK_LCD, 3, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_FIMD0, "sclk_fimd0", "div_fimd0", + GATE_SCLK_LCD, 0, CLK_SET_RATE_PARENT, 0), + + /* GATE_SCLK_ISP_TOP */ + GATE(CLK_SCLK_CAM1, "sclk_cam1", "div_cam1", + GATE_SCLK_ISP_TOP, 4, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "div_uart_isp", + GATE_SCLK_ISP_TOP, 3, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "div_spi1_isp", + GATE_SCLK_ISP_TOP, 2, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "div_spi0_isp", + GATE_SCLK_ISP_TOP, 1, CLK_SET_RATE_PARENT, 0), + + /* GATE_SCLK_FSYS */ + GATE(CLK_SCLK_UPLL, "sclk_upll", "mout_upll", GATE_SCLK_FSYS, 10, 0, 0), + GATE(CLK_SCLK_TSADC, "sclk_tsadc", "div_tsadc_pre", + GATE_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_EBI, "sclk_ebi", "div_ebi", + GATE_SCLK_FSYS, 6, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc1_pre", + GATE_SCLK_FSYS, 1, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc0_pre", + GATE_SCLK_FSYS, 0, CLK_SET_RATE_PARENT, 0), + + /* GATE_SCLK_PERIL */ + GATE(CLK_SCLK_I2S, "sclk_i2s", "div_i2s", + GATE_SCLK_PERIL, 18, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_PCM, "sclk_pcm", "div_pcm", + GATE_SCLK_PERIL, 16, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_SPI1, "sclk_spi1", "div_spi1_pre", + GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre", + GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1", + GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0", + GATE_SCLK_PERIL, 0, CLK_SET_RATE_PARENT, 0), + + /* GATE_IP_CAM */ + GATE(CLK_QEJPEG, "qejpeg", "div_cam_blk_320", GATE_IP_CAM, 19, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PIXELASYNCM1, "pixelasyncm1", "div_cam_blk_320", + GATE_IP_CAM, 18, CLK_IGNORE_UNUSED, 0), + GATE(CLK_PIXELASYNCM0, "pixelasyncm0", "div_cam_blk_320", + GATE_IP_CAM, 17, CLK_IGNORE_UNUSED, 0), + GATE(CLK_PPMUCAMIF, "ppmucamif", "div_cam_blk_320", + GATE_IP_CAM, 16, CLK_IGNORE_UNUSED, 0), + GATE(CLK_QEM2MSCALER, "qem2mscaler", "div_cam_blk_320", + GATE_IP_CAM, 14, CLK_IGNORE_UNUSED, 0), + GATE(CLK_QEGSCALER1, "qegscaler1", "div_cam_blk_320", + GATE_IP_CAM, 13, CLK_IGNORE_UNUSED, 0), + GATE(CLK_QEGSCALER0, "qegscaler0", "div_cam_blk_320", + GATE_IP_CAM, 12, CLK_IGNORE_UNUSED, 0), + GATE(CLK_SMMUJPEG, "smmujpeg", "div_cam_blk_320", + GATE_IP_CAM, 11, 0, 0), + GATE(CLK_SMMUM2M2SCALER, "smmum2m2scaler", "div_cam_blk_320", + GATE_IP_CAM, 9, 0, 0), + GATE(CLK_SMMUGSCALER1, "smmugscaler1", "div_cam_blk_320", + GATE_IP_CAM, 8, 0, 0), + GATE(CLK_SMMUGSCALER0, "smmugscaler0", "div_cam_blk_320", + GATE_IP_CAM, 7, 0, 0), + GATE(CLK_JPEG, "jpeg", "div_cam_blk_320", GATE_IP_CAM, 6, 0, 0), + GATE(CLK_M2MSCALER, "m2mscaler", "div_cam_blk_320", + GATE_IP_CAM, 2, 0, 0), + GATE(CLK_GSCALER1, "gscaler1", "div_cam_blk_320", GATE_IP_CAM, 1, 0, 0), + GATE(CLK_GSCALER0, "gscaler0", "div_cam_blk_320", GATE_IP_CAM, 0, 0, 0), + + /* GATE_IP_MFC */ + GATE(CLK_QEMFC, "qemfc", "div_aclk_200", GATE_IP_MFC, 5, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PPMUMFC_L, "ppmumfc_l", "div_aclk_200", GATE_IP_MFC, 3, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_SMMUMFC_L, "smmumfc_l", "div_aclk_200", GATE_IP_MFC, 1, 0, 0), + GATE(CLK_MFC, "mfc", "div_aclk_200", GATE_IP_MFC, 0, 0, 0), + + /* GATE_IP_G3D */ + GATE(CLK_SMMUG3D, "smmug3d", "div_aclk_200", GATE_IP_G3D, 3, 0, 0), + GATE(CLK_QEG3D, "qeg3d", "div_aclk_200", GATE_IP_G3D, 2, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PPMUG3D, "ppmug3d", "div_aclk_200", GATE_IP_G3D, 1, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_G3D, "g3d", "div_aclk_200", GATE_IP_G3D, 0, 0, 0), + + /* GATE_IP_LCD */ + GATE(CLK_QE_CH1_LCD, "qe_ch1_lcd", "div_aclk_160", GATE_IP_LCD, 7, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_QE_CH0_LCD, "qe_ch0_lcd", "div_aclk_160", GATE_IP_LCD, 6, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_PPMULCD0, "ppmulcd0", "div_aclk_160", GATE_IP_LCD, 5, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_SMMUFIMD0, "smmufimd0", "div_aclk_160", GATE_IP_LCD, 4, 0, 0), + GATE(CLK_DSIM0, "dsim0", "div_aclk_160", GATE_IP_LCD, 3, 0, 0), + GATE(CLK_SMIES, "smies", "div_aclk_160", GATE_IP_LCD, 2, 0, 0), + GATE(CLK_FIMD0, "fimd0", "div_aclk_160", GATE_IP_LCD, 0, 0, 0), + + /* GATE_IP_ISP */ + GATE(CLK_CAM1, "cam1", "mout_aclk_266_sub", GATE_IP_ISP, 5, 0, 0), + GATE(CLK_UART_ISP_TOP, "uart_isp_top", "mout_aclk_266_sub", + GATE_IP_ISP, 3, 0, 0), + GATE(CLK_SPI1_ISP_TOP, "spi1_isp_top", "mout_aclk_266_sub", + GATE_IP_ISP, 2, 0, 0), + GATE(CLK_SPI0_ISP_TOP, "spi0_isp_top", "mout_aclk_266_sub", + GATE_IP_ISP, 1, 0, 0), + + /* GATE_IP_FSYS */ + GATE(CLK_TSADC, "tsadc", "div_aclk_200", GATE_IP_FSYS, 20, 0, 0), + GATE(CLK_PPMUFILE, "ppmufile", "div_aclk_200", GATE_IP_FSYS, 17, + CLK_IGNORE_UNUSED, 0), + GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13, 0, 0), + GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12, 0, 0), + GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0, 0), + GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6, 0, 0), + GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5, 0, 0), + GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0), + GATE(CLK_PDMA0, "pdma0", "div_aclk_200", GATE_IP_FSYS, 0, 0, 0), + + /* GATE_IP_PERIL */ + GATE(CLK_PWM, "pwm", "div_aclk_100", GATE_IP_PERIL, 24, 0, 0), + GATE(CLK_PCM, "pcm", "div_aclk_100", GATE_IP_PERIL, 23, 0, 0), + GATE(CLK_I2S, "i2s", "div_aclk_100", GATE_IP_PERIL, 21, 0, 0), + GATE(CLK_SPI1, "spi1", "div_aclk_100", GATE_IP_PERIL, 17, 0, 0), + GATE(CLK_SPI0, "spi0", "div_aclk_100", GATE_IP_PERIL, 16, 0, 0), + GATE(CLK_I2C7, "i2c7", "div_aclk_100", GATE_IP_PERIL, 13, 0, 0), + GATE(CLK_I2C6, "i2c6", "div_aclk_100", GATE_IP_PERIL, 12, 0, 0), + GATE(CLK_I2C5, "i2c5", "div_aclk_100", GATE_IP_PERIL, 11, 0, 0), + GATE(CLK_I2C4, "i2c4", "div_aclk_100", GATE_IP_PERIL, 10, 0, 0), + GATE(CLK_I2C3, "i2c3", "div_aclk_100", GATE_IP_PERIL, 9, 0, 0), + GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0), + GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0), + GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0), + GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0), + GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0), + + /* GATE_BLOCK */ + GATE(CLK_BLOCK_LCD, "block_lcd", "div_aclk_160", GATE_BLOCK, 4, 0, 0), + GATE(CLK_BLOCK_G3D, "block_g3d", "div_aclk_200", GATE_BLOCK, 3, 0, 0), +}; + +/* APLL & MPLL & BPLL & UPLL */ +static struct samsung_pll_rate_table exynos3250_pll_rates[] = { + PLL_35XX_RATE(1200000000, 400, 4, 1), + PLL_35XX_RATE(1100000000, 275, 3, 1), + PLL_35XX_RATE(1066000000, 533, 6, 1), + PLL_35XX_RATE(1000000000, 250, 3, 1), + PLL_35XX_RATE( 960000000, 320, 4, 1), + PLL_35XX_RATE( 900000000, 300, 4, 1), + PLL_35XX_RATE( 850000000, 425, 6, 1), + PLL_35XX_RATE( 800000000, 200, 3, 1), + PLL_35XX_RATE( 700000000, 175, 3, 1), + PLL_35XX_RATE( 667000000, 667, 12, 1), + PLL_35XX_RATE( 600000000, 400, 4, 2), + PLL_35XX_RATE( 533000000, 533, 6, 2), + PLL_35XX_RATE( 520000000, 260, 3, 2), + PLL_35XX_RATE( 500000000, 250, 3, 2), + PLL_35XX_RATE( 400000000, 200, 3, 2), + PLL_35XX_RATE( 200000000, 200, 3, 3), + PLL_35XX_RATE( 100000000, 200, 3, 4), + { /* sentinel */ } +}; + +/* VPLL */ +static struct samsung_pll_rate_table exynos3250_vpll_rates[] = { + PLL_36XX_RATE(600000000, 100, 2, 1, 0), + PLL_36XX_RATE(533000000, 267, 3, 2, 32668), + PLL_36XX_RATE(519231000, 173, 2, 2, 5046), + PLL_36XX_RATE(500000000, 250, 3, 2, 0), + PLL_36XX_RATE(445500000, 149, 2, 2, 32768), + PLL_36XX_RATE(445055000, 148, 2, 2, 23047), + PLL_36XX_RATE(400000000, 200, 3, 2, 0), + PLL_36XX_RATE(371250000, 124, 2, 2, 49512), + PLL_36XX_RATE(370879000, 185, 3, 2, 28803), + PLL_36XX_RATE(340000000, 170, 3, 2, 0), + PLL_36XX_RATE(335000000, 112, 2, 2, 43691), + PLL_36XX_RATE(333000000, 111, 2, 2, 0), + PLL_36XX_RATE(330000000, 110, 2, 2, 0), + PLL_36XX_RATE(320000000, 107, 2, 2, 43691), + PLL_36XX_RATE(300000000, 100, 2, 2, 0), + PLL_36XX_RATE(275000000, 275, 3, 3, 0), + PLL_36XX_RATE(222750000, 149, 2, 3, 32768), + PLL_36XX_RATE(222528000, 148, 2, 3, 23069), + PLL_36XX_RATE(160000000, 160, 3, 3, 0), + PLL_36XX_RATE(148500000, 99, 2, 3, 0), + PLL_36XX_RATE(148352000, 99, 2, 3, 59070), + PLL_36XX_RATE(108000000, 144, 2, 4, 0), + PLL_36XX_RATE( 74250000, 99, 2, 4, 0), + PLL_36XX_RATE( 74176000, 99, 3, 4, 59070), + PLL_36XX_RATE( 54054000, 216, 3, 5, 14156), + PLL_36XX_RATE( 54000000, 144, 2, 5, 0), + { /* sentinel */ } +}; + +static struct samsung_pll_clock exynos3250_plls[nr_plls] __initdata = { + [apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll", + APLL_LOCK, APLL_CON0, NULL), + [mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll", + MPLL_LOCK, MPLL_CON0, NULL), + [vpll] = PLL(pll_36xx, CLK_FOUT_VPLL, "fout_vpll", "fin_pll", + VPLL_LOCK, VPLL_CON0, NULL), + [upll] = PLL(pll_35xx, CLK_FOUT_UPLL, "fout_upll", "fin_pll", + UPLL_LOCK, UPLL_CON0, NULL), +}; + +static void __init exynos3250_cmu_init(struct device_node *np) +{ + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + + samsung_clk_init(np, reg_base, CLK_NR_CLKS); + + samsung_clk_register_fixed_factor(fixed_factor_clks, + ARRAY_SIZE(fixed_factor_clks)); + + exynos3250_plls[apll].rate_table = exynos3250_pll_rates; + exynos3250_plls[mpll].rate_table = exynos3250_pll_rates; + exynos3250_plls[vpll].rate_table = exynos3250_vpll_rates; + exynos3250_plls[upll].rate_table = exynos3250_pll_rates; + + samsung_clk_register_pll(exynos3250_plls, ARRAY_SIZE(exynos3250_plls), + reg_base); + + samsung_clk_register_fixed_rate(fixed_rate_clks, + ARRAY_SIZE(fixed_rate_clks)); + + samsung_clk_register_mux(mux_clks, ARRAY_SIZE(mux_clks)); + samsung_clk_register_div(div_clks, ARRAY_SIZE(div_clks)); + samsung_clk_register_gate(gate_clks, ARRAY_SIZE(gate_clks)); + + exynos3250_clk_sleep_init(); +} +CLK_OF_DECLARE(exynos3250_cmu, "samsung,exynos3250-cmu", exynos3250_cmu_init); diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h new file mode 100644 index 0000000..3efb323 --- /dev/null +++ b/include/dt-bindings/clock/exynos3250.h @@ -0,0 +1,256 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * Author: Tomasz Figa <t.figa@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants for Samsung Exynos3250 clock controllers. + */ + +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H +#define _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H + +/* + * Let each exported clock get a unique index, which is used on DT-enabled + * platforms to lookup the clock from a clock specifier. These indices are + * therefore considered an ABI and so must not be changed. This implies + * that new clocks should be added either in free spaces between clock groups + * or at the end. + */ + + +/* + * Main CMU + */ + +#define CLK_OSCSEL 1 +#define CLK_FIN_PLL 2 +#define CLK_FOUT_APLL 3 +#define CLK_FOUT_VPLL 4 +#define CLK_FOUT_UPLL 5 +#define CLK_FOUT_MPLL 6 + +/* Muxes */ +#define CLK_MOUT_MPLL_USER_L 16 +#define CLK_MOUT_GDL 17 +#define CLK_MOUT_MPLL_USER_R 18 +#define CLK_MOUT_GDR 19 +#define CLK_MOUT_EBI 20 +#define CLK_MOUT_ACLK_200 21 +#define CLK_MOUT_ACLK_160 22 +#define CLK_MOUT_ACLK_100 23 +#define CLK_MOUT_ACLK_266_1 24 +#define CLK_MOUT_ACLK_266_0 25 +#define CLK_MOUT_ACLK_266 26 +#define CLK_MOUT_VPLL 27 +#define CLK_MOUT_EPLL_USER 28 +#define CLK_MOUT_EBI_1 29 +#define CLK_MOUT_UPLL 30 +#define CLK_MOUT_ACLK_400_MCUISP_SUB 31 +#define CLK_MOUT_MPLL 32 +#define CLK_MOUT_ACLK_400_MCUISP 33 +#define CLK_MOUT_VPLLSRC 34 +#define CLK_MOUT_CAM1 35 +#define CLK_MOUT_CAM_BLK 36 +#define CLK_MOUT_MFC 37 +#define CLK_MOUT_MFC_1 38 +#define CLK_MOUT_MFC_0 39 +#define CLK_MOUT_G3D 40 +#define CLK_MOUT_G3D_1 41 +#define CLK_MOUT_G3D_0 42 +#define CLK_MOUT_MIPI0 43 +#define CLK_MOUT_FIMD0 44 +#define CLK_MOUT_UART_ISP 45 +#define CLK_MOUT_SPI1_ISP 46 +#define CLK_MOUT_SPI0_ISP 47 +#define CLK_MOUT_TSADC 48 +#define CLK_MOUT_MMC1 49 +#define CLK_MOUT_MMC0 50 +#define CLK_MOUT_UART1 51 +#define CLK_MOUT_UART0 52 +#define CLK_MOUT_SPI1 53 +#define CLK_MOUT_SPI0 54 +#define CLK_MOUT_AUDIO 55 +#define CLK_MOUT_MPLL_USER_C 56 +#define CLK_MOUT_HPM 57 +#define CLK_MOUT_CORE 58 +#define CLK_MOUT_APLL 59 +#define CLK_MOUT_ACLK_266_SUB 60 + +/* Dividers */ +#define CLK_DIV_GPL 64 +#define CLK_DIV_GDL 65 +#define CLK_DIV_GPR 66 +#define CLK_DIV_GDR 67 +#define CLK_DIV_MPLL_PRE 68 +#define CLK_DIV_ACLK_400_MCUISP 69 +#define CLK_DIV_EBI 70 +#define CLK_DIV_ACLK_200 71 +#define CLK_DIV_ACLK_160 72 +#define CLK_DIV_ACLK_100 73 +#define CLK_DIV_ACLK_266 74 +#define CLK_DIV_CAM1 75 +#define CLK_DIV_CAM_BLK 76 +#define CLK_DIV_MFC 77 +#define CLK_DIV_G3D 78 +#define CLK_DIV_MIPI0_PRE 79 +#define CLK_DIV_MIPI0 80 +#define CLK_DIV_FIMD0 81 +#define CLK_DIV_UART_ISP 82 +#define CLK_DIV_SPI1_ISP_PRE 83 +#define CLK_DIV_SPI1_ISP 84 +#define CLK_DIV_SPI0_ISP_PRE 85 +#define CLK_DIV_SPI0_ISP 86 +#define CLK_DIV_TSADC_PRE 87 +#define CLK_DIV_TSADC 88 +#define CLK_DIV_MMC1_PRE 89 +#define CLK_DIV_MMC1 90 +#define CLK_DIV_MMC0_PRE 91 +#define CLK_DIV_MMC0 92 +#define CLK_DIV_UART1 93 +#define CLK_DIV_UART0 94 +#define CLK_DIV_SPI1_PRE 95 +#define CLK_DIV_SPI1 96 +#define CLK_DIV_SPI0_PRE 97 +#define CLK_DIV_SPI0 98 +#define CLK_DIV_PCM 99 +#define CLK_DIV_AUDIO 100 +#define CLK_DIV_I2S 101 +#define CLK_DIV_CORE2 102 +#define CLK_DIV_APLL 103 +#define CLK_DIV_PCLK_DBG 104 +#define CLK_DIV_ATB 105 +#define CLK_DIV_COREM 106 +#define CLK_DIV_CORE 107 +#define CLK_DIV_HPM 108 +#define CLK_DIV_COPY 109 + +/* Gates */ +#define CLK_ASYNC_G3D 128 +#define CLK_ASYNC_MFCL 129 +#define CLK_PPMULEFT 130 +#define CLK_GPIO_LEFT 131 +#define CLK_ASYNC_ISPMX 132 +#define CLK_ASYNC_FSYSD 133 +#define CLK_ASYNC_LCD0X 134 +#define CLK_ASYNC_CAMX 135 +#define CLK_PPMURIGHT 136 +#define CLK_GPIO_RIGHT 137 +#define CLK_MONOCNT 138 +#define CLK_TZPC6 139 +#define CLK_PROVISIONKEY1 140 +#define CLK_PROVISIONKEY0 141 +#define CLK_CMU_ISPPART 142 +#define CLK_TMU_APBIF 143 +#define CLK_KEYIF 144 +#define CLK_RTC 145 +#define CLK_WDT 146 +#define CLK_MCT 147 +#define CLK_SECKEY 148 +#define CLK_TZPC5 149 +#define CLK_TZPC4 150 +#define CLK_TZPC3 151 +#define CLK_TZPC2 152 +#define CLK_TZPC1 153 +#define CLK_TZPC0 154 +#define CLK_CMU_COREPART 155 +#define CLK_CMU_TOPPART 156 +#define CLK_PMU_APBIF 157 +#define CLK_SYSREG 158 +#define CLK_CHIP_ID 159 +#define CLK_QEJPEG 160 +#define CLK_PIXELASYNCM1 161 +#define CLK_PIXELASYNCM0 162 +#define CLK_PPMUCAMIF 163 +#define CLK_QEM2MSCALER 164 +#define CLK_QEGSCALER1 165 +#define CLK_QEGSCALER0 166 +#define CLK_SMMUJPEG 167 +#define CLK_SMMUM2M2SCALER 168 +#define CLK_SMMUGSCALER1 169 +#define CLK_SMMUGSCALER0 170 +#define CLK_JPEG 171 +#define CLK_M2MSCALER 172 +#define CLK_GSCALER1 173 +#define CLK_GSCALER0 174 +#define CLK_QEMFC 175 +#define CLK_PPMUMFC_L 176 +#define CLK_SMMUMFC_L 177 +#define CLK_MFC 178 +#define CLK_SMMUG3D 179 +#define CLK_QEG3D 180 +#define CLK_PPMUG3D 181 +#define CLK_G3D 182 +#define CLK_QE_CH1_LCD 183 +#define CLK_QE_CH0_LCD 184 +#define CLK_PPMULCD0 185 +#define CLK_SMMUFIMD0 186 +#define CLK_DSIM0 187 +#define CLK_FIMD0 188 +#define CLK_CAM1 189 +#define CLK_UART_ISP_TOP 190 +#define CLK_SPI1_ISP_TOP 191 +#define CLK_SPI0_ISP_TOP 192 +#define CLK_TSADC 193 +#define CLK_PPMUFILE 194 +#define CLK_USBOTG 195 +#define CLK_USBHOST 196 +#define CLK_SROMC 197 +#define CLK_SDMMC1 198 +#define CLK_SDMMC0 199 +#define CLK_PDMA1 200 +#define CLK_PDMA0 201 +#define CLK_PWM 202 +#define CLK_PCM 203 +#define CLK_I2S 204 +#define CLK_SPI1 205 +#define CLK_SPI0 206 +#define CLK_I2C7 207 +#define CLK_I2C6 208 +#define CLK_I2C5 209 +#define CLK_I2C4 210 +#define CLK_I2C3 211 +#define CLK_I2C2 212 +#define CLK_I2C1 213 +#define CLK_I2C0 214 +#define CLK_UART1 215 +#define CLK_UART0 216 +#define CLK_BLOCK_LCD 217 +#define CLK_BLOCK_G3D 218 +#define CLK_SMIES 219 + +/* Special clocks */ +#define CLK_SCLK_JPEG 224 +#define CLK_SCLK_M2MSCALER 225 +#define CLK_SCLK_GSCALER1 226 +#define CLK_SCLK_GSCALER0 227 +#define CLK_SCLK_MFC 228 +#define CLK_SCLK_G3D 229 +#define CLK_SCLK_MIPIDPHY2L 230 +#define CLK_SCLK_MIPI0 231 +#define CLK_SCLK_FIMD0 232 +#define CLK_SCLK_CAM1 233 +#define CLK_SCLK_UART_ISP 234 +#define CLK_SCLK_SPI1_ISP 235 +#define CLK_SCLK_SPI0_ISP 236 +#define CLK_SCLK_UPLL 237 +#define CLK_SCLK_TSADC 238 +#define CLK_SCLK_EBI 239 +#define CLK_SCLK_MMC1 240 +#define CLK_SCLK_MMC0 241 +#define CLK_SCLK_I2S 242 +#define CLK_SCLK_PCM 243 +#define CLK_SCLK_SPI1 244 +#define CLK_SCLK_SPI0 245 +#define CLK_SCLK_UART1 246 +#define CLK_SCLK_UART0 247 + +/* + * Total number of clocks of main CMU. + * NOTE: Must be equal to last clock ID increased by one. + */ +#define CLK_NR_CLKS 248 + +#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H */ -- 1.8.0 ^ permalink raw reply related [flat|nested] 9+ messages in thread
[parent not found: <1397783728-6193-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>]
* [PATCHv3 6/7] dt-bindings: add documentation for Exynos3250 clock controller [not found] ` <1397783728-6193-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> @ 2014-04-18 1:15 ` Chanwoo Choi 2014-04-18 1:15 ` [PATCHv3 7/7] ARM: dts: Add device tree sources for Exynos3250 Chanwoo Choi 1 sibling, 0 replies; 9+ messages in thread From: Chanwoo Choi @ 2014-04-18 1:15 UTC (permalink / raw) To: linux-kernel-u79uwXL29TY76Z2rM5mHXA Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ, ben-linux-elnMNo+KYs3YtjvyW6yDsg, kgene.kim-Sze3O3UU22JBDgjK7y7TUQ, t.figa-Sze3O3UU22JBDgjK7y7TUQ, arnd-r2nGTMty4D4, olof-nZhT3qVonbNeoWH0uzbU5w, marc.zyngier-5wv7dgnIgG8, thomas.abraham-QSEj5FYQhm4dnm+yROfE0A, kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ, cw00.choi-Sze3O3UU22JBDgjK7y7TUQ, sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ, hyunhee.kim-Sze3O3UU22JBDgjK7y7TUQ, yj44.cho-Sze3O3UU22JBDgjK7y7TUQ, chanho61.park-Sze3O3UU22JBDgjK7y7TUQ, sajjan.linux-Re5JQEeQqe8AvxtiuMwx3w, tushar.behera-QSEj5FYQhm4dnm+yROfE0A, sachin.kamat-QSEj5FYQhm4dnm+yROfE0A, linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, Mike Turquette, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Randy Dunlap The Exynos3250 clocks are statically listed and registered using the Samsung specific common clock helper functions. Both device tree based clock lookup and clkdev based clock lookups are supported. Cc: Mike Turquette <mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Cc: Kukjin Kim <kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org> Cc: Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> Cc: Randy Dunlap <rdunlap-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org> Cc: Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Signed-off-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Signed-off-by: Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Acked-by: Kyungmin Park <kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> --- .../devicetree/bindings/clock/exynos3250-clock.txt | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/exynos3250-clock.txt diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt new file mode 100644 index 0000000..aadc9c5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt @@ -0,0 +1,41 @@ +* Samsung Exynos3250 Clock Controller + +The Exynos3250 clock controller generates and supplies clock to various +controllers within the Exynos3250 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/exynos3250.h header and can be used in device +tree sources. + +Example 1: An example of a clock controller node is listed below. + + cmu: clock-controller@10030000 { + compatible = "samsung,exynos3250-cmu"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + +Example 2: UART controller node that consumes the clock generated by the clock + controller. Refer to the standard clock bindings for information + about 'clocks' and 'clock-names' property. + + serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 109 0>; + clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + }; -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCHv3 7/7] ARM: dts: Add device tree sources for Exynos3250 [not found] ` <1397783728-6193-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> 2014-04-18 1:15 ` [PATCHv3 6/7] dt-bindings: add documentation for Exynos3250 clock controller Chanwoo Choi @ 2014-04-18 1:15 ` Chanwoo Choi 1 sibling, 0 replies; 9+ messages in thread From: Chanwoo Choi @ 2014-04-18 1:15 UTC (permalink / raw) To: linux-kernel-u79uwXL29TY76Z2rM5mHXA Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ, ben-linux-elnMNo+KYs3YtjvyW6yDsg, kgene.kim-Sze3O3UU22JBDgjK7y7TUQ, t.figa-Sze3O3UU22JBDgjK7y7TUQ, arnd-r2nGTMty4D4, olof-nZhT3qVonbNeoWH0uzbU5w, marc.zyngier-5wv7dgnIgG8, thomas.abraham-QSEj5FYQhm4dnm+yROfE0A, kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ, cw00.choi-Sze3O3UU22JBDgjK7y7TUQ, sw0312.kim-Sze3O3UU22JBDgjK7y7TUQ, hyunhee.kim-Sze3O3UU22JBDgjK7y7TUQ, yj44.cho-Sze3O3UU22JBDgjK7y7TUQ, chanho61.park-Sze3O3UU22JBDgjK7y7TUQ, sajjan.linux-Re5JQEeQqe8AvxtiuMwx3w, tushar.behera-QSEj5FYQhm4dnm+yROfE0A, sachin.kamat-QSEj5FYQhm4dnm+yROfE0A, linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, Inki Dae, Jaehoon Chung, Bartlomiej Zolnierkiewicz, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala From: Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> This patch add new exynos3250.dtsi to support Exynos3250 SoC based on Cortex-A7 dual core and includes following dt nodes: - GIC interrupt controller - Pinctrl to control GPIOs - Clock controller - CPU information (Cortex-A7 dual core) - UART to support serial port - MCT (Multi Core Timer) - ADC (Analog Digital Converter) - I2C/SPI bus - Power domain - PMU (Performance Monitoring Unit) - MSHC (Mobile Storage Host Controller) - PWM (Pluse Width Modulation) - AMBA bus - sysram node for SYSRAM memory mapping - pmu node for PMU memory mapping Signed-off-by: Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Signed-off-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Signed-off-by: Kyungmin Park <kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Signed-off-by: Inki Dae <inki.dae-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Signed-off-by: Hyunhee Kim <hyunhee.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Signed-off-by: Jaehoon Chung <jh80.chung-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org> Cc: Kukjin Kim <kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org> Cc: Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> Cc: Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org --- arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 477 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/exynos3250.dtsi | 427 ++++++++++++++++++++++++++ 2 files changed, 904 insertions(+) create mode 100644 arch/arm/boot/dts/exynos3250-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/exynos3250.dtsi diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi new file mode 100644 index 0000000..976490b --- /dev/null +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi @@ -0,0 +1,477 @@ +/* + * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpc1-3", "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + mipi0_clk: mipi0-clk { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@11000000 { + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe2: gpe2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm0: gpm0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm1: gpm1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm2: gpm2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm3: gpm3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm4: gpm4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>, + <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>, + <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpk0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpk1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpk1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpk1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpk1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + cam_port_b_io: cam-port-b-io { + samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", + "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", + "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + cam_port_b_clk_active: cam-port-b-clk-active { + samsung,pins = "gpm2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_b_clk_idle: cam-port-b-clk-idle { + samsung,pins = "gpm2-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_i2c0: fimc-is-i2c0 { + samsung,pins = "gpm4-0", "gpm4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_i2c1: fimc-is-i2c1 { + samsung,pins = "gpm4-2", "gpm4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_uart: fimc-is-uart { + samsung,pins = "gpm3-5", "gpm3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi new file mode 100644 index 0000000..879c3eb --- /dev/null +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -0,0 +1,427 @@ +/* + * Samsung's Exynos3250 SoC device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include "exynos3250-pinctrl.dtsi" +#include <dt-bindings/clock/exynos3250.h> + +/ { + compatible = "samsung,exynos3250"; + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + mshc0 = &mshc_0; + mshc1 = &mshc_1; + spi0 = &spi_0; + spi1 = &spi_1; + i2c0 = &i2c_0; + i2c1 = &i2c_1; + i2c2 = &i2c_2; + i2c3 = &i2c_3; + i2c4 = &i2c_4; + i2c5 = &i2c_5; + i2c6 = &i2c_6; + i2c7 = &i2c_7; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clock-frequency = <1000000000>; + }; + }; + + fixed-rate-clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + xusbxti: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xusbxti"; + }; + + xxti: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xxti"; + }; + + xtcxo: clock@2 { + compatible = "fixed-clock"; + reg = <2>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xtcxo"; + }; + }; + + sysram@02020000 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x02020000 0x1000>; + }; + + sysram-ns@0x0205F000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x0205F000 0x1000>; + }; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + sys_reg: syscon@10010000 { + compatible = "samsung,exynos3-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; + + pmu@10020000 { + compatible = "samsung,exynos4210-pmu"; + reg = <0x10020000 0x1000>; + }; + + pd_cam: cam-power-domain@10023C00 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C00 0x20>; + }; + + pd_mfc: mfc-power-domain@10023C40 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C40 0x20>; + }; + + pd_g3d: g3d-power-domain@10023C60 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C60 0x20>; + }; + + pd_lcd0: lcd0-power-domain@10023C80 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C80 0x20>; + }; + + pd_isp: isp-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + }; + + cmu: clock-controller@10030000 { + compatible = "samsung,exynos3250-cmu"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + + rtc@10070000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 73 0>, <0 74 0>; + status = "disabled"; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>, + <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>; + clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>; + clock-names = "fin_pll", "mct"; + }; + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,exynos3250-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <0 225 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 48 0>; + }; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos3250-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 240 0>; + }; + + mshc_0: mshc@12510000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12510000 0x1000>; + interrupts = <0 142 0>; + clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mshc_1: mshc@12520000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12520000 0x1000>; + interrupts = <0 143 0>; + clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <0 138 0>; + clocks = <&cmu CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <0 139 0>; + clocks = <&cmu CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + adc: adc@126C0000 { + compatible = "samsung,exynos-adc-v3"; + reg = <0x126C0000 0x100>, <0x10020718 0x4>; + interrupts = <0 137 0>; + clock-names = "adc", "sclk_tsadc"; + clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + + serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 109 0>; + clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial@13810000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13810000 0x100>; + interrupts = <0 110 0>; + clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + i2c_0: i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13860000 0x100>; + interrupts = <0 113 0>; + clocks = <&cmu CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + status = "disabled"; + }; + + i2c_1: i2c@13870000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13870000 0x100>; + interrupts = <0 114 0>; + clocks = <&cmu CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + status = "disabled"; + }; + + i2c_2: i2c@13880000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13880000 0x100>; + interrupts = <0 115 0>; + clocks = <&cmu CLK_I2C2>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + status = "disabled"; + }; + + i2c_3: i2c@13890000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13890000 0x100>; + interrupts = <0 116 0>; + clocks = <&cmu CLK_I2C3>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; + status = "disabled"; + }; + + i2c_4: i2c@138A0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138A0000 0x100>; + interrupts = <0 117 0>; + clocks = <&cmu CLK_I2C4>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; + status = "disabled"; + }; + + i2c_5: i2c@138B0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138B0000 0x100>; + interrupts = <0 118 0>; + clocks = <&cmu CLK_I2C5>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; + status = "disabled"; + }; + + i2c_6: i2c@138C0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138C0000 0x100>; + interrupts = <0 119 0>; + clocks = <&cmu CLK_I2C6>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; + status = "disabled"; + }; + + i2c_7: i2c@138D0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138D0000 0x100>; + interrupts = <0 120 0>; + clocks = <&cmu CLK_I2C7>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; + status = "disabled"; + }; + + spi_0: spi@13920000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13920000 0x100>; + interrupts = <0 121 0>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + status = "disabled"; + }; + + spi_1: spi@13930000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13930000 0x100>; + interrupts = <0 122 0>; + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + status = "disabled"; + }; + + pwm: pwm@139D0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x139D0000 0x1000>; + interrupts = <0 104 0>, <0 105 0>, <0 106 0>, + <0 107 0>, <0 108 0>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <0 18 0>, <0 19 0>; + }; +}; -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCHv3 0/7] Support new Exynos3250 SoC based on Cortex-A7 dual core 2014-04-18 1:15 [PATCHv3 0/7] Support new Exynos3250 SoC based on Cortex-A7 dual core Chanwoo Choi ` (5 preceding siblings ...) [not found] ` <1397783728-6193-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> @ 2014-04-21 1:10 ` Chanwoo Choi 6 siblings, 0 replies; 9+ messages in thread From: Chanwoo Choi @ 2014-04-21 1:10 UTC (permalink / raw) To: kgene.kim Cc: Chanwoo Choi, linux-kernel, linux, ben-linux, t.figa, arnd, olof, marc.zyngier, thomas.abraham, kyungmin.park, sw0312.kim, hyunhee.kim, yj44.cho, chanho61.park, sajjan.linux, tushar.behera, sachin.kamat, linux-samsung-soc, linux-arm-kernel, devicetree Dear Kukjin, Please review this patchset for Exynos3250 SoC. Best Regards, Chanwoo Choi On 04/18/2014 10:15 AM, Chanwoo Choi wrote: > This patchset support new Exynos3250 Samsung SoC based on Cortex-A7 dual core. > Exynos3250 is a System-On-Chip (SoC) that is based on 32-bit RISC processor > for Smartphone. It is desigend with the 28nm low-power high-K metal gate process > and provides the best performance features. > > This patchset include some patches such as: > - Support secondary CPU of Exynos3250 (cpu up/down) > - Supoort uart/mct/adc/gic/i2c/spi/power-domain/pmu/mshc/pwm/amba > - Support the clock control for Exynos3250 using common clk framework > > This patchset is based on following git repo/branch. > - git repo : git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git > - branch : for-next (Linux 3.15-rc1) > > Additional patch description about static memory mapping: > This patchset must need to map memory mapping about SYSRAM/PMU for CPU UP/DOWN. > So, this patchset need to merge following patchset to remove static memory > mapping for SYSRAM[1] / PMU ([2] or [3]). > > [1] http://www.spinics.net/lists/arm-kernel/msg323011.html > [2] https://lkml.org/lkml/2014/4/2/48 > [3] http://www.spinics.net/lists/arm-kernel/msg316013.html > > And, > The pinctrl patch for Exynos3250 was posted as separated patch[4]. > [4] https://lkml.org/lkml/2014/4/13/156 > > Changes from v2: > - Remove static memory mapping about SYSRAM/PMU such as following patches: > ARM: EXYNOS: Add IO mapping for non-secure SYSRAM of Exynos3250 > ARM: EXYNOS: Add IO mapping for PMU of Exynos3250 > - Add description for secondary CPU boot of Exynos4212/Exynos3250 > - Fix description in exynos_cpu_die() to remove particular SoC series > - Fix minor coding style > - Add documentation for Exynos3250 clock controller > > Changes from v1: > - Add new "samsung,exynos3" compatible name > - Add comment about exynos_cpu_boot in Exynos4212 > - Remove unnecessary 'goto' statement in firmware.c > - Use read_cpuid_part_number() function instead of assembler directly > - Post separated pinctrl patch from this patchset > : https://lkml.org/lkml/2014/4/13/156 > - Remove unused pmu interrupts due to Exynos3250 dual-core > - Cosolidate all the patches related to exynos3250.dtsi into one patch > - Fix gic compatible name to "cortex-a15-gic" because Cortex-A7 GIC is same > - Add sign-off of sender to all this patches > - Fix minor typo > > Chanwoo Choi (4): > ARM: EXYNOS: Add Exynos3250 SoC ID > ARM: EXYNOS: Support secondary CPU boot of Exynos3250 > ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7 > dt-bindings: add documentation for Exynos3250 clock controller > > Kyungmin Park (1): > ARM: EXYNOS: Support secondary CPU boot of Exynos4212 > > Tomasz Figa (2): > clk: samsung: exynos3250: Add clocks using common clock framework > ARM: dts: Add device tree sources for Exynos3250 > > .../devicetree/bindings/clock/exynos3250-clock.txt | 41 ++ > arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 477 +++++++++++++ > arch/arm/boot/dts/exynos3250.dtsi | 427 +++++++++++ > arch/arm/mach-exynos/Kconfig | 22 + > arch/arm/mach-exynos/exynos.c | 2 + > arch/arm/mach-exynos/firmware.c | 21 +- > arch/arm/mach-exynos/hotplug.c | 19 +- > arch/arm/plat-samsung/include/plat/cpu.h | 10 + > drivers/clk/samsung/Makefile | 1 + > drivers/clk/samsung/clk-exynos3250.c | 785 +++++++++++++++++++++ > include/dt-bindings/clock/exynos3250.h | 256 +++++++ > 11 files changed, 2053 insertions(+), 8 deletions(-) > create mode 100644 Documentation/devicetree/bindings/clock/exynos3250-clock.txt > create mode 100644 arch/arm/boot/dts/exynos3250-pinctrl.dtsi > create mode 100644 arch/arm/boot/dts/exynos3250.dtsi > create mode 100644 drivers/clk/samsung/clk-exynos3250.c > create mode 100644 include/dt-bindings/clock/exynos3250.h > ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2014-04-21 1:10 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-18 1:15 [PATCHv3 0/7] Support new Exynos3250 SoC based on Cortex-A7 dual core Chanwoo Choi
2014-04-18 1:15 ` [PATCHv3 1/7] ARM: EXYNOS: Add Exynos3250 SoC ID Chanwoo Choi
2014-04-18 1:15 ` [PATCHv3 2/7] ARM: EXYNOS: Support secondary CPU boot of Exynos4212 Chanwoo Choi
2014-04-18 1:15 ` [PATCHv3 3/7] ARM: EXYNOS: Support secondary CPU boot of Exynos3250 Chanwoo Choi
2014-04-18 1:15 ` [PATCHv3 4/7] ARM: EXYNOS: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7 Chanwoo Choi
2014-04-18 1:15 ` [PATCHv3 5/7] clk: samsung: exynos3250: Add clocks using common clock framework Chanwoo Choi
[not found] ` <1397783728-6193-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2014-04-18 1:15 ` [PATCHv3 6/7] dt-bindings: add documentation for Exynos3250 clock controller Chanwoo Choi
2014-04-18 1:15 ` [PATCHv3 7/7] ARM: dts: Add device tree sources for Exynos3250 Chanwoo Choi
2014-04-21 1:10 ` [PATCHv3 0/7] Support new Exynos3250 SoC based on Cortex-A7 dual core Chanwoo Choi
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox