[PATCH 49/97] ARM: l2c: fix register naming

[PATCH 49/97] ARM: l2c: fix register naming

[Russell King]

We have a mixture of different devices with different register layouts,
but we group all the bits together in an opaque mess.  Split them out
into those which are L2C-310 specific and ones which refer to earlier
devices.  Provide full auxiliary control register definitions.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/hardware/cache-l2x0.h | 73 ++++++++++++++++++++----------
 arch/arm/mach-cns3xxx/core.c               |  8 ++--
 arch/arm/mach-exynos/sleep.S               |  8 ++--
 arch/arm/mach-imx/system.c                 |  8 ++--
 arch/arm/mach-omap2/omap-mpuss-lowpower.c  |  2 +-
 arch/arm/mach-omap2/omap4-common.c         | 18 ++++----
 arch/arm/mach-prima2/l2x0.c                |  5 +-
 arch/arm/mach-realview/realview_pbx.c      |  4 +-
 arch/arm/mach-spear/spear13xx.c            |  6 +--
 arch/arm/mach-sti/board-dt.c               |  8 ++--
 arch/arm/mach-tegra/sleep.h                |  8 ++--
 arch/arm/mach-ux500/cache-l2x0.c           |  4 +-
 arch/arm/mach-vexpress/ct-ca9x4.c          |  4 +-
 arch/arm/mm/cache-l2x0.c                   | 57 +++++++++++------------
 14 files changed, 118 insertions(+), 95 deletions(-)

diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 3af45734b514..b3ee122c6f24 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -26,8 +26,8 @@
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
 #define L2X0_AUX_CTRL			0x104
-#define L2X0_TAG_LATENCY_CTRL		0x108
-#define L2X0_DATA_LATENCY_CTRL		0x10C
+#define L310_TAG_LATENCY_CTRL		0x108
+#define L310_DATA_LATENCY_CTRL		0x10C
 #define L2X0_EVENT_CNT_CTRL		0x200
 #define L2X0_EVENT_CNT1_CFG		0x204
 #define L2X0_EVENT_CNT0_CFG		0x208
@@ -54,16 +54,16 @@
 #define L2X0_LOCKDOWN_WAY_D_BASE	0x900
 #define L2X0_LOCKDOWN_WAY_I_BASE	0x904
 #define L2X0_LOCKDOWN_STRIDE		0x08
-#define L2X0_ADDR_FILTER_START		0xC00
-#define L2X0_ADDR_FILTER_END		0xC04
+#define L310_ADDR_FILTER_START		0xC00
+#define L310_ADDR_FILTER_END		0xC04
 #define L2X0_TEST_OPERATION		0xF00
 #define L2X0_LINE_DATA			0xF10
 #define L2X0_LINE_TAG			0xF30
 #define L2X0_DEBUG_CTRL			0xF40
-#define L2X0_PREFETCH_CTRL		0xF60
-#define L2X0_POWER_CTRL			0xF80
-#define   L2X0_DYNAMIC_CLK_GATING_EN	(1 << 1)
-#define   L2X0_STNDBY_MODE_EN		(1 << 0)
+#define L310_PREFETCH_CTRL		0xF60
+#define L310_POWER_CTRL			0xF80
+#define   L310_DYNAMIC_CLK_GATING_EN	(1 << 1)
+#define   L310_STNDBY_MODE_EN		(1 << 0)
 
 /* Registers shifts and masks */
 #define L2X0_CACHE_ID_PART_MASK		(0xf << 6)
@@ -88,29 +88,52 @@
 #define L310_CACHE_ID_RTL_R3P3		0x09
 
 #define L2X0_AUX_CTRL_MASK			0xc0000fff
+/* L2C auxiliary control register - bits common to L2C-210/220/310 */
+#define L2C_AUX_CTRL_WAY_SIZE_SHIFT		17
+#define L2C_AUX_CTRL_WAY_SIZE_MASK		(7 << 17)
+#define L2C_AUX_CTRL_WAY_SIZE(n)		((n) << 17)
+#define L2C_AUX_CTRL_EVTMON_ENABLE		BIT(20)
+#define L2C_AUX_CTRL_PARITY_ENABLE		BIT(21)
+#define L2C_AUX_CTRL_SHARED_OVERRIDE		BIT(22)
+/* L2C-210/220 common bits */
 #define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT	0
-#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK	0x7
+#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK	(7 << 0)
 #define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT	3
-#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK	(0x7 << 3)
+#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK	(7 << 3)
 #define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT		6
-#define L2X0_AUX_CTRL_TAG_LATENCY_MASK		(0x7 << 6)
+#define L2X0_AUX_CTRL_TAG_LATENCY_MASK		(7 << 6)
 #define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT	9
-#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK	(0x7 << 9)
-#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT	16
-#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT		17
-#define L2X0_AUX_CTRL_WAY_SIZE_MASK		(0x7 << 17)
-#define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT	22
-#define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT		26
-#define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT		27
-#define L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT	28
-#define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT	29
-#define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT		30
+#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK	(7 << 9)
+#define L2X0_AUX_CTRL_ASSOC_SHIFT		13
+#define L2X0_AUX_CTRL_ASSOC_MASK		(15 << 13)
+/* L2C-210 specific bits */
+#define L210_AUX_CTRL_WRAP_DISABLE		BIT(12)
+#define L210_AUX_CTRL_WA_OVERRIDE		BIT(23)
+#define L210_AUX_CTRL_EXCLUSIVE_ABORT		BIT(24)
+/* L2C-220 specific bits */
+#define L220_AUX_CTRL_EXCLUSIVE_CACHE		BIT(12)
+#define L220_AUX_CTRL_FWA_SHIFT			23
+#define L220_AUX_CTRL_FWA_MASK			(3 << 23)
+#define L220_AUX_CTRL_NS_LOCKDOWN		BIT(26)
+#define L220_AUX_CTRL_NS_INT_CTRL		BIT(27)
+/* L2C-310 specific bits */
+#define L310_AUX_CTRL_FULL_LINE_ZERO		BIT(0)	/* R2P0+ */
+#define L310_AUX_CTRL_HIGHPRIO_SO_DEV		BIT(10)	/* R2P0+ */
+#define L310_AUX_CTRL_STORE_LIMITATION		BIT(11)	/* R2P0+ */
+#define L310_AUX_CTRL_EXCLUSIVE_CACHE		BIT(12)
+#define L310_AUX_CTRL_ASSOCIATIVITY_16		BIT(16)
+#define L310_AUX_CTRL_CACHE_REPLACE_RR		BIT(25)	/* R2P0+ */
+#define L310_AUX_CTRL_NS_LOCKDOWN		BIT(26)
+#define L310_AUX_CTRL_NS_INT_CTRL		BIT(27)
+#define L310_AUX_CTRL_DATA_PREFETCH		BIT(28)
+#define L310_AUX_CTRL_INSTR_PREFETCH		BIT(29)
+#define L310_AUX_CTRL_EARLY_BRESP		BIT(30)	/* R2P0+ */
 
-#define L2X0_LATENCY_CTRL_SETUP_SHIFT	0
-#define L2X0_LATENCY_CTRL_RD_SHIFT	4
-#define L2X0_LATENCY_CTRL_WR_SHIFT	8
+#define L310_LATENCY_CTRL_SETUP(n)		((n) << 0)
+#define L310_LATENCY_CTRL_RD(n)			((n) << 4)
+#define L310_LATENCY_CTRL_WR(n)			((n) << 8)
 
-#define L2X0_ADDR_FILTER_EN		1
+#define L310_ADDR_FILTER_EN		1
 
 #define L2X0_CTRL_EN			1
 
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 2ae28a69e3e5..5c31b2638c01 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -272,9 +272,9 @@ void __init cns3xxx_l2x0_init(void)
 	 *
 	 * 1 cycle of latency for setup, read and write accesses
 	 */
-	val = readl(base + L2X0_TAG_LATENCY_CTRL);
+	val = readl(base + L310_TAG_LATENCY_CTRL);
 	val &= 0xfffff888;
-	writel(val, base + L2X0_TAG_LATENCY_CTRL);
+	writel(val, base + L310_TAG_LATENCY_CTRL);
 
 	/*
 	 * Data RAM Control register
@@ -285,9 +285,9 @@ void __init cns3xxx_l2x0_init(void)
 	 *
 	 * 1 cycle of latency for setup, read and write accesses
 	 */
-	val = readl(base + L2X0_DATA_LATENCY_CTRL);
+	val = readl(base + L310_DATA_LATENCY_CTRL);
 	val &= 0xfffff888;
-	writel(val, base + L2X0_DATA_LATENCY_CTRL);
+	writel(val, base + L310_DATA_LATENCY_CTRL);
 
 	/* 32 KiB, 8-way, parity disable */
 	l2x0_init(base, 0x00540000, 0xfe000fff);
diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S
index a2613e944e10..7e0af530511e 100644
--- a/arch/arm/mach-exynos/sleep.S
+++ b/arch/arm/mach-exynos/sleep.S
@@ -65,13 +65,13 @@ ENTRY(exynos_cpu_resume)
 	ldr	r2, [r0, #L2X0_R_AUX_CTRL]
 	str	r2, [r1, #L2X0_AUX_CTRL]
 	ldr	r2, [r0, #L2X0_R_TAG_LATENCY]
-	str	r2, [r1, #L2X0_TAG_LATENCY_CTRL]
+	str	r2, [r1, #L310_TAG_LATENCY_CTRL]
 	ldr	r2, [r0, #L2X0_R_DATA_LATENCY]
-	str	r2, [r1, #L2X0_DATA_LATENCY_CTRL]
+	str	r2, [r1, #L310_DATA_LATENCY_CTRL]
 	ldr	r2, [r0, #L2X0_R_PREFETCH_CTRL]
-	str	r2, [r1, #L2X0_PREFETCH_CTRL]
+	str	r2, [r1, #L310_PREFETCH_CTRL]
 	ldr	r2, [r0, #L2X0_R_PWR_CTRL]
-	str	r2, [r1, #L2X0_POWER_CTRL]
+	str	r2, [r1, #L310_POWER_CTRL]
 	mov	r2, #1
 	str	r2, [r1, #L2X0_CTRL]
 skip_l2_resume:
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
index c6571f1de9fd..59013a81107b 100644
--- a/arch/arm/mach-imx/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -124,7 +124,7 @@ void __init imx_init_l2cache(void)
 	}
 
 	/* Configure the L2 PREFETCH and POWER registers */
-	val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
+	val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL);
 	val |= 0x70800000;
 	/*
 	 * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
@@ -137,9 +137,9 @@ void __init imx_init_l2cache(void)
 	 */
 	if (cpu_is_imx6q())
 		val &= ~(1 << 30 | 1 << 23);
-	writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
-	val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
-	writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);
+	writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL);
+	val = L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN;
+	writel_relaxed(val, l2x0_base + L310_POWER_CTRL);
 
 	iounmap(l2x0_base);
 	of_node_put(np);
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 667915d236f3..ba43f49fbb59 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -194,7 +194,7 @@ static void save_l2x0_context(void)
 	if (l2x0_base) {
 		val = __raw_readl(l2x0_base + L2X0_AUX_CTRL);
 		__raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET);
-		val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL);
+		val = __raw_readl(l2x0_base + L310_PREFETCH_CTRL);
 		__raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET);
 	}
 }
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 46dac72aaa4c..dc9844a55443 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -213,15 +213,15 @@ static int __init omap_l2_cache_init(void)
 		return -ENOMEM;
 
 	/* 16-way associativity, parity disabled, way size - 64KB (es2.0 +) */
-	aux_ctrl = (1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT) |
-			(0x1 << 25) |
-			(0x1 << L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT) |
-			(0x1 << L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT)) |
-			(0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) |
-			(1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) |
-			(1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) |
-			(1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) |
-			(1 << L2X0_AUX_CTRL_EARLY_BRESP_SHIFT);
+	aux_ctrl = L310_AUX_CTRL_ASSOCIATIVITY_16 |
+		   L310_AUX_CTRL_CACHE_REPLACE_RR |
+		   L310_AUX_CTRL_NS_LOCKDOWN |
+		   L310_AUX_CTRL_NS_INT_CTRL |
+		   L2C_AUX_CTRL_WAY_SIZE(3) |
+		   L2C_AUX_CTRL_SHARED_OVERRIDE |
+		   L310_AUX_CTRL_DATA_PREFETCH |
+		   L310_AUX_CTRL_INSTR_PREFETCH |
+		   L310_AUX_CTRL_EARLY_BRESP;
 
 	outer_cache.write_sec = omap4_l2c310_write_sec;
 	if (of_have_populated_dt())
diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c
index c7102539c0b0..2db82742fb74 100644
--- a/arch/arm/mach-prima2/l2x0.c
+++ b/arch/arm/mach-prima2/l2x0.c
@@ -17,13 +17,12 @@ struct l2x0_aux {
 };
 
 static const struct l2x0_aux prima2_l2x0_aux __initconst = {
-	.val = 2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT,
+	.val = L2C_AUX_CTRL_WAY_SIZE(2),
 	.mask =	0,
 };
 
 static const struct l2x0_aux marco_l2x0_aux __initconst = {
-	.val = (2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) |
-		(1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT),
+	.val = L2C_AUX_CTRL_WAY_SIZE(2) | L310_AUX_CTRL_ASSOCIATIVITY_16,
 	.mask = L2X0_AUX_CTRL_MASK,
 };
 
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 9d75493e3f0c..f0cfd7e7e569 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -370,8 +370,8 @@ static void __init realview_pbx_init(void)
 			__io_address(REALVIEW_PBX_TILE_L220_BASE);
 
 		/* set RAM latencies to 1 cycle for eASIC */
-		writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
-		writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+		writel(0, l2x0_base + L310_TAG_LATENCY_CTRL);
+		writel(0, l2x0_base + L310_DATA_LATENCY_CTRL);
 
 		/* 16KB way size, 8-way associativity, parity disabled
 		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index 7aa6e8cf830f..92860fa01668 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -38,14 +38,14 @@ void __init spear13xx_l2x0_init(void)
 	if (!IS_ENABLED(CONFIG_CACHE_L2X0))
 		return;
 
-	writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL);
+	writel_relaxed(0x06, VA_L2CC_BASE + L310_PREFETCH_CTRL);
 
 	/*
 	 * Program following latencies in order to make
 	 * SPEAr1340 work at 600 MHz
 	 */
-	writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL);
-	writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL);
+	writel_relaxed(0x221, VA_L2CC_BASE + L310_TAG_LATENCY_CTRL);
+	writel_relaxed(0x441, VA_L2CC_BASE + L310_DATA_LATENCY_CTRL);
 	l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff);
 }
 
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index 1217fb598cfd..dc8669efc12d 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -19,10 +19,10 @@ void __init stih41x_l2x0_init(void)
 	u32 way_size = 0x4;
 	u32 aux_ctrl;
 	/* may be this can be encoded in macros like BIT*() */
-	aux_ctrl = (0x1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) |
-		(0x1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) |
-		(0x1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) |
-		(way_size << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+	aux_ctrl = L2C_AUX_CTRL_SHARED_OVERRIDE |
+		   L310_AUX_CTRL_DATA_PREFETCH |
+		   L310_AUX_CTRL_INSTR_PREFETCH |
+		   L2C_AUX_CTRL_WAY_SIZE(way_size);
 
 	l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
 }
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
index a4edbb3abd3d..a032820d2fac 100644
--- a/arch/arm/mach-tegra/sleep.h
+++ b/arch/arm/mach-tegra/sleep.h
@@ -134,13 +134,13 @@
 	tst	\tmp3, #L2X0_CTRL_EN
 	bne	exit_l2_resume
 	ldr	\tmp3, [\tmp1, #L2X0_R_TAG_LATENCY]
-	str	\tmp3, [\tmp2, #L2X0_TAG_LATENCY_CTRL]
+	str	\tmp3, [\tmp2, #L310_TAG_LATENCY_CTRL]
 	ldr	\tmp3, [\tmp1, #L2X0_R_DATA_LATENCY]
-	str	\tmp3, [\tmp2, #L2X0_DATA_LATENCY_CTRL]
+	str	\tmp3, [\tmp2, #L310_DATA_LATENCY_CTRL]
 	ldr	\tmp3, [\tmp1, #L2X0_R_PREFETCH_CTRL]
-	str	\tmp3, [\tmp2, #L2X0_PREFETCH_CTRL]
+	str	\tmp3, [\tmp2, #L310_PREFETCH_CTRL]
 	ldr	\tmp3, [\tmp1, #L2X0_R_PWR_CTRL]
-	str	\tmp3, [\tmp2, #L2X0_POWER_CTRL]
+	str	\tmp3, [\tmp2, #L310_POWER_CTRL]
 	ldr	\tmp3, [\tmp1, #L2X0_R_AUX_CTRL]
 	str	\tmp3, [\tmp2, #L2X0_AUX_CTRL]
 	mov	\tmp3, #L2X0_CTRL_EN
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index 5cc7e3625d8c..067c37a054fb 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -59,10 +59,10 @@ static int __init ux500_l2x0_init(void)
 	/* DBx540's L2 has 128KB way size */
 	if (cpu_is_ux540_family())
 		/* 128KB way size */
-		aux_val |= (0x4 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+		aux_val |= L2C_AUX_CTRL_WAY_SIZE(4);
 	else
 		/* 64KB way size */
-		aux_val |= (0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+		aux_val |= L2C_AUX_CTRL_WAY_SIZE(3);
 
 	outer_cache.write_sec = ux500_l2c310_write_sec;
 
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 6f34497a4245..6c4ffb6c5ad8 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -145,8 +145,8 @@ static void __init ct_ca9x4_init(void)
 	void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
 
 	/* set RAM latencies to 1 cycle for this core tile. */
-	writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
-	writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+	writel(0, l2x0_base + L310_TAG_LATENCY_CTRL);
+	writel(0, l2x0_base + L310_DATA_LATENCY_CTRL);
 
 	l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
 #endif
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index b1fa825c133f..3e2c22a12d87 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -567,13 +567,13 @@ static void __init l2c310_save(void __iomem *base)
 	unsigned revision;
 
 	l2x0_saved_regs.tag_latency = readl_relaxed(base +
-		L2X0_TAG_LATENCY_CTRL);
+		L310_TAG_LATENCY_CTRL);
 	l2x0_saved_regs.data_latency = readl_relaxed(base +
-		L2X0_DATA_LATENCY_CTRL);
+		L310_DATA_LATENCY_CTRL);
 	l2x0_saved_regs.filter_end = readl_relaxed(base +
-		L2X0_ADDR_FILTER_END);
+		L310_ADDR_FILTER_END);
 	l2x0_saved_regs.filter_start = readl_relaxed(base +
-		L2X0_ADDR_FILTER_START);
+		L310_ADDR_FILTER_START);
 
 	revision = readl_relaxed(base + L2X0_CACHE_ID) &
 			L2X0_CACHE_ID_RTL_MASK;
@@ -581,12 +581,12 @@ static void __init l2c310_save(void __iomem *base)
 	/* From r2p0, there is Prefetch offset/control register */
 	if (revision >= L310_CACHE_ID_RTL_R2P0)
 		l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base +
-							L2X0_PREFETCH_CTRL);
+							L310_PREFETCH_CTRL);
 
 	/* From r3p0, there is Power control register */
 	if (revision >= L310_CACHE_ID_RTL_R3P0)
 		l2x0_saved_regs.pwr_ctrl = readl_relaxed(base +
-							L2X0_POWER_CTRL);
+							L310_POWER_CTRL);
 }
 
 static void l2c310_resume(void)
@@ -598,23 +598,23 @@ static void l2c310_resume(void)
 
 		/* restore pl310 setup */
 		writel_relaxed(l2x0_saved_regs.tag_latency,
-			       base + L2X0_TAG_LATENCY_CTRL);
+			       base + L310_TAG_LATENCY_CTRL);
 		writel_relaxed(l2x0_saved_regs.data_latency,
-			       base + L2X0_DATA_LATENCY_CTRL);
+			       base + L310_DATA_LATENCY_CTRL);
 		writel_relaxed(l2x0_saved_regs.filter_end,
-			       base + L2X0_ADDR_FILTER_END);
+			       base + L310_ADDR_FILTER_END);
 		writel_relaxed(l2x0_saved_regs.filter_start,
-			       base + L2X0_ADDR_FILTER_START);
+			       base + L310_ADDR_FILTER_START);
 
 		revision = readl_relaxed(base + L2X0_CACHE_ID) &
 				L2X0_CACHE_ID_RTL_MASK;
 
 		if (revision >= L310_CACHE_ID_RTL_R2P0)
 			l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base,
-				      L2X0_PREFETCH_CTRL);
+				      L310_PREFETCH_CTRL);
 		if (revision >= L310_CACHE_ID_RTL_R3P0)
 			l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base,
-				      L2X0_POWER_CTRL);
+				      L310_POWER_CTRL);
 
 		l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8);
 	}
@@ -645,11 +645,11 @@ static void __init l2c310_fixup(void __iomem *base, u32 cache_id,
 
 	if (revision >= L310_CACHE_ID_RTL_R3P0 &&
 	    revision < L310_CACHE_ID_RTL_R3P2) {
-		u32 val = readl_relaxed(base + L2X0_PREFETCH_CTRL);
+		u32 val = readl_relaxed(base + L310_PREFETCH_CTRL);
 		/* I don't think bit23 is required here... but iMX6 does so */
 		if (val & (BIT(30) | BIT(23))) {
 			val &= ~(BIT(30) | BIT(23));
-			l2c_write_sec(val, base, L2X0_PREFETCH_CTRL);
+			l2c_write_sec(val, base, L310_PREFETCH_CTRL);
 			errata[n++] = "752271";
 		}
 	}
@@ -745,7 +745,8 @@ static void __init __l2c_init(const struct l2c_init_data *data,
 	 *
 	 * L2 cache size = number of ways * way size.
 	 */
-	way_size_bits = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17;
+	way_size_bits = (aux & L2C_AUX_CTRL_WAY_SIZE_MASK) >>
+			L2C_AUX_CTRL_WAY_SIZE_SHIFT;
 	l2x0_size = ways * (data->way_size_0 << way_size_bits);
 
 	fns = data->outer_cache;
@@ -886,27 +887,27 @@ static void __init l2c310_of_parse(const struct device_node *np,
 	of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
 	if (tag[0] && tag[1] && tag[2])
 		writel_relaxed(
-			((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
-			((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
-			((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
-			l2x0_base + L2X0_TAG_LATENCY_CTRL);
+			L310_LATENCY_CTRL_RD(tag[0] - 1) |
+			L310_LATENCY_CTRL_WR(tag[1] - 1) |
+			L310_LATENCY_CTRL_SETUP(tag[2] - 1),
+			l2x0_base + L310_TAG_LATENCY_CTRL);
 
 	of_property_read_u32_array(np, "arm,data-latency",
 				   data, ARRAY_SIZE(data));
 	if (data[0] && data[1] && data[2])
 		writel_relaxed(
-			((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
-			((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
-			((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
-			l2x0_base + L2X0_DATA_LATENCY_CTRL);
+			L310_LATENCY_CTRL_RD(data[0] - 1) |
+			L310_LATENCY_CTRL_WR(data[1] - 1) |
+			L310_LATENCY_CTRL_SETUP(data[2] - 1),
+			l2x0_base + L310_DATA_LATENCY_CTRL);
 
 	of_property_read_u32_array(np, "arm,filter-ranges",
 				   filter, ARRAY_SIZE(filter));
 	if (filter[1]) {
 		writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M),
-			       l2x0_base + L2X0_ADDR_FILTER_END);
-		writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN,
-			       l2x0_base + L2X0_ADDR_FILTER_START);
+			       l2x0_base + L310_ADDR_FILTER_END);
+		writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN,
+			       l2x0_base + L310_ADDR_FILTER_START);
 	}
 }
 
@@ -1281,7 +1282,7 @@ static void __init tauros3_save(void __iomem *base)
 	l2x0_saved_regs.aux2_ctrl =
 		readl_relaxed(base + TAUROS3_AUX2_CTRL);
 	l2x0_saved_regs.prefetch_ctrl =
-		readl_relaxed(base + L2X0_PREFETCH_CTRL);
+		readl_relaxed(base + L310_PREFETCH_CTRL);
 }
 
 static void tauros3_resume(void)
@@ -1292,7 +1293,7 @@ static void tauros3_resume(void)
 		writel_relaxed(l2x0_saved_regs.aux2_ctrl,
 			       base + TAUROS3_AUX2_CTRL);
 		writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
-			       base + L2X0_PREFETCH_CTRL);
+			       base + L310_PREFETCH_CTRL);
 
 		l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8);
 	}
-- 
1.8.3.1

Re: [PATCH 49/97] ARM: l2c: fix register naming

[Stephen Warren]

On 04/28/2014 01:30 PM, Russell King wrote:
> We have a mixture of different devices with different register layouts,
> but we group all the bits together in an opaque mess.  Split them out
> into those which are L2C-310 specific and ones which refer to earlier
> devices.  Provide full auxiliary control register definitions.

Acked-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

[PATCH 51/97] ARM: l2c: remove platforms/SoCs setting early BRESP

[Russell King]

Since we now automatically enable early BRESP in core L2C-310 code when
we detect a Cortex-A9, we don't need platforms/SoCs to set this bit
explicitly.  Instead, they should seek to preserve the value of bit 30
in the auxiliary control register.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-berlin/berlin.c                            | 2 +-
 arch/arm/mach-exynos/exynos.c                            | 4 ++--
 arch/arm/mach-omap2/omap4-common.c                       | 3 +--
 arch/arm/mach-shmobile/board-armadillo800eva-reference.c | 4 ++--
 arch/arm/mach-shmobile/board-armadillo800eva.c           | 4 ++--
 arch/arm/mach-shmobile/board-kzm9g-reference.c           | 4 ++--
 arch/arm/mach-shmobile/board-kzm9g.c                     | 4 ++--
 arch/arm/mach-shmobile/setup-r8a7778.c                   | 4 ++--
 arch/arm/mach-shmobile/setup-r8a7779.c                   | 4 ++--
 arch/arm/mach-spear/spear13xx.c                          | 2 +-
 arch/arm/mach-tegra/tegra.c                              | 4 ++--
 11 files changed, 19 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c
index 025bcb5473eb..6709d2a6bec8 100644
--- a/arch/arm/mach-berlin/berlin.c
+++ b/arch/arm/mach-berlin/berlin.c
@@ -24,7 +24,7 @@ static void __init berlin_init_machine(void)
 	 * with DT probing for L2CCs, berlin_init_machine can be removed.
 	 * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc
 	 */
-	l2x0_of_init(0x70c00000, 0xfeffffff);
+	l2x0_of_init(0x30c00000, 0xfeffffff);
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index b32a907d021d..e6828fb46034 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -32,8 +32,8 @@
 #include "mfc.h"
 #include "regs-pmu.h"
 
-#define L2_AUX_VAL 0x7C470001
-#define L2_AUX_MASK 0xC200ffff
+#define L2_AUX_VAL 0x3c470001
+#define L2_AUX_MASK 0xc200ffff
 
 static struct map_desc exynos4_iodesc[] __initdata = {
 	{
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index dc9844a55443..9ce52548a484 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -220,8 +220,7 @@ static int __init omap_l2_cache_init(void)
 		   L2C_AUX_CTRL_WAY_SIZE(3) |
 		   L2C_AUX_CTRL_SHARED_OVERRIDE |
 		   L310_AUX_CTRL_DATA_PREFETCH |
-		   L310_AUX_CTRL_INSTR_PREFETCH |
-		   L310_AUX_CTRL_EARLY_BRESP;
+		   L310_AUX_CTRL_INSTR_PREFETCH;
 
 	outer_cache.write_sec = omap4_l2c310_write_sec;
 	if (of_have_populated_dt())
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index 57d1a78367b6..34e7f3c17dd2 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -164,8 +164,8 @@ static void __init eva_init(void)
 	r8a7740_meram_workaround();
 
 #ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
+	/* Shared attribute override enable, 32K*8way */
+	l2x0_init(IOMEM(0xf0002000), 0x00440000, 0xc2000fff);
 #endif
 
 	r8a7740_add_standard_devices_dt();
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 2858f380beae..7688990edd3a 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1270,8 +1270,8 @@ static void __init eva_init(void)
 
 
 #ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
+	/* Shared attribute override enable, 32K*8way */
+	l2x0_init(IOMEM(0xf0002000), 0x00440000, 0xc2000fff);
 #endif
 
 	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 598e32488410..85873f186d77 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -36,8 +36,8 @@ static void __init kzm_init(void)
 	sh73a0_add_standard_devices_dt();
 
 #ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
+	/* Shared attribute override enable, 64K*8way */
+	l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
 #endif
 }
 
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 03dc3ac84502..ea9bf39fdc10 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -876,8 +876,8 @@ static void __init kzm_init(void)
 	gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */
 
 #ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
+	/* Shared attribute override enable, 64K*8way */
+	l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
 #endif
 
 	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 6d694526e4ca..3a8e5316671e 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -298,10 +298,10 @@ void __init r8a7778_add_dt_devices(void)
 	void __iomem *base = ioremap_nocache(0xf0100000, 0x1000);
 	if (base) {
 		/*
-		 * Early BRESP enable, Shared attribute override enable, 64K*16way
+		 * Shared attribute override enable, 64K*16way
 		 * don't call iounmap(base)
 		 */
-		l2x0_init(base, 0x40470000, 0x82000fff);
+		l2x0_init(base, 0x00470000, 0xc2000fff);
 	}
 #endif
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 8e860b36997a..91c90bf0ae83 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -700,8 +700,8 @@ static struct platform_device *r8a7779_standard_devices[] __initdata = {
 void __init r8a7779_add_standard_devices(void)
 {
 #ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 64K*16way */
-	l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff);
+	/* Shared attribute override enable, 64K*16way */
+	l2x0_init(IOMEM(0xf0100000), 0x00470000, 0xc2000fff);
 #endif
 	r8a7779_pm_init();
 
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index 92860fa01668..dcb300443b66 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -46,7 +46,7 @@ void __init spear13xx_l2x0_init(void)
 	 */
 	writel_relaxed(0x221, VA_L2CC_BASE + L310_TAG_LATENCY_CTRL);
 	writel_relaxed(0x441, VA_L2CC_BASE + L310_DATA_LATENCY_CTRL);
-	l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff);
+	l2x0_init(VA_L2CC_BASE, 0x30a60001, 0xfe00ffff);
 }
 
 /*
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 6191603379e1..ecbb5411a104 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -89,9 +89,9 @@ static void __init tegra_init_cache(void)
 
 	cache_type = readl(p + L2X0_CACHE_TYPE);
 	aux_ctrl = (cache_type & 0x700) << (17-8);
-	aux_ctrl |= 0x7C400001;
+	aux_ctrl |= 0x3c400001;
 
-	ret = l2x0_of_init(aux_ctrl, 0x8200c3fe);
+	ret = l2x0_of_init(aux_ctrl, 0xc200c3fe);
 	if (!ret)
 		l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs);
 #endif
-- 
1.8.3.1

Re: [PATCH 51/97] ARM: l2c: remove platforms/SoCs setting early BRESP

[Stephen Warren]

On 04/28/2014 01:30 PM, Russell King wrote:
> Since we now automatically enable early BRESP in core L2C-310 code when
> we detect a Cortex-A9, we don't need platforms/SoCs to set this bit
> explicitly.  Instead, they should seek to preserve the value of bit 30
> in the auxiliary control register.

Acked-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

Re: [PATCH 51/97] ARM: l2c: remove platforms/SoCs setting early BRESP

[Simon Horman]

On Mon, Apr 28, 2014 at 08:30:32PM +0100, Russell King wrote:
> Since we now automatically enable early BRESP in core L2C-310 code when
> we detect a Cortex-A9, we don't need platforms/SoCs to set this bit
> explicitly.  Instead, they should seek to preserve the value of bit 30
> in the auxiliary control register.
> 
> Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Russell King <rmk+kernel-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>

I would prefer if this patch was broken out into individual patches
for each board or SoC file and that they were then picked up
by their respective platform maintainers.

Likewise for patch 66/97. Although it is only for shmobile
I would prefer it broken out.

> ---
>  arch/arm/mach-berlin/berlin.c                            | 2 +-
>  arch/arm/mach-exynos/exynos.c                            | 4 ++--
>  arch/arm/mach-omap2/omap4-common.c                       | 3 +--
>  arch/arm/mach-shmobile/board-armadillo800eva-reference.c | 4 ++--
>  arch/arm/mach-shmobile/board-armadillo800eva.c           | 4 ++--
>  arch/arm/mach-shmobile/board-kzm9g-reference.c           | 4 ++--
>  arch/arm/mach-shmobile/board-kzm9g.c                     | 4 ++--
>  arch/arm/mach-shmobile/setup-r8a7778.c                   | 4 ++--
>  arch/arm/mach-shmobile/setup-r8a7779.c                   | 4 ++--
>  arch/arm/mach-spear/spear13xx.c                          | 2 +-
>  arch/arm/mach-tegra/tegra.c                              | 4 ++--
>  11 files changed, 19 insertions(+), 20 deletions(-)
> 
> diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c
> index 025bcb5473eb..6709d2a6bec8 100644
> --- a/arch/arm/mach-berlin/berlin.c
> +++ b/arch/arm/mach-berlin/berlin.c
> @@ -24,7 +24,7 @@ static void __init berlin_init_machine(void)
>  	 * with DT probing for L2CCs, berlin_init_machine can be removed.
>  	 * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc
>  	 */
> -	l2x0_of_init(0x70c00000, 0xfeffffff);
> +	l2x0_of_init(0x30c00000, 0xfeffffff);
>  	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
>  }
>  
> diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
> index b32a907d021d..e6828fb46034 100644
> --- a/arch/arm/mach-exynos/exynos.c
> +++ b/arch/arm/mach-exynos/exynos.c
> @@ -32,8 +32,8 @@
>  #include "mfc.h"
>  #include "regs-pmu.h"
>  
> -#define L2_AUX_VAL 0x7C470001
> -#define L2_AUX_MASK 0xC200ffff
> +#define L2_AUX_VAL 0x3c470001
> +#define L2_AUX_MASK 0xc200ffff
>  
>  static struct map_desc exynos4_iodesc[] __initdata = {
>  	{
> diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
> index dc9844a55443..9ce52548a484 100644
> --- a/arch/arm/mach-omap2/omap4-common.c
> +++ b/arch/arm/mach-omap2/omap4-common.c
> @@ -220,8 +220,7 @@ static int __init omap_l2_cache_init(void)
>  		   L2C_AUX_CTRL_WAY_SIZE(3) |
>  		   L2C_AUX_CTRL_SHARED_OVERRIDE |
>  		   L310_AUX_CTRL_DATA_PREFETCH |
> -		   L310_AUX_CTRL_INSTR_PREFETCH |
> -		   L310_AUX_CTRL_EARLY_BRESP;
> +		   L310_AUX_CTRL_INSTR_PREFETCH;
>  
>  	outer_cache.write_sec = omap4_l2c310_write_sec;
>  	if (of_have_populated_dt())
> diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
> index 57d1a78367b6..34e7f3c17dd2 100644
> --- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
> +++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
> @@ -164,8 +164,8 @@ static void __init eva_init(void)
>  	r8a7740_meram_workaround();
>  
>  #ifdef CONFIG_CACHE_L2X0
> -	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
> -	l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
> +	/* Shared attribute override enable, 32K*8way */
> +	l2x0_init(IOMEM(0xf0002000), 0x00440000, 0xc2000fff);
>  #endif
>  
>  	r8a7740_add_standard_devices_dt();
> diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
> index 2858f380beae..7688990edd3a 100644
> --- a/arch/arm/mach-shmobile/board-armadillo800eva.c
> +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
> @@ -1270,8 +1270,8 @@ static void __init eva_init(void)
>  
>  
>  #ifdef CONFIG_CACHE_L2X0
> -	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
> -	l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
> +	/* Shared attribute override enable, 32K*8way */
> +	l2x0_init(IOMEM(0xf0002000), 0x00440000, 0xc2000fff);
>  #endif
>  
>  	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
> diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
> index 598e32488410..85873f186d77 100644
> --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
> +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
> @@ -36,8 +36,8 @@ static void __init kzm_init(void)
>  	sh73a0_add_standard_devices_dt();
>  
>  #ifdef CONFIG_CACHE_L2X0
> -	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
> -	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
> +	/* Shared attribute override enable, 64K*8way */
> +	l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
>  #endif
>  }
>  
> diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
> index 03dc3ac84502..ea9bf39fdc10 100644
> --- a/arch/arm/mach-shmobile/board-kzm9g.c
> +++ b/arch/arm/mach-shmobile/board-kzm9g.c
> @@ -876,8 +876,8 @@ static void __init kzm_init(void)
>  	gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */
>  
>  #ifdef CONFIG_CACHE_L2X0
> -	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
> -	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
> +	/* Shared attribute override enable, 64K*8way */
> +	l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
>  #endif
>  
>  	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
> diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
> index 6d694526e4ca..3a8e5316671e 100644
> --- a/arch/arm/mach-shmobile/setup-r8a7778.c
> +++ b/arch/arm/mach-shmobile/setup-r8a7778.c
> @@ -298,10 +298,10 @@ void __init r8a7778_add_dt_devices(void)
>  	void __iomem *base = ioremap_nocache(0xf0100000, 0x1000);
>  	if (base) {
>  		/*
> -		 * Early BRESP enable, Shared attribute override enable, 64K*16way
> +		 * Shared attribute override enable, 64K*16way
>  		 * don't call iounmap(base)
>  		 */
> -		l2x0_init(base, 0x40470000, 0x82000fff);
> +		l2x0_init(base, 0x00470000, 0xc2000fff);
>  	}
>  #endif
>  
> diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
> index 8e860b36997a..91c90bf0ae83 100644
> --- a/arch/arm/mach-shmobile/setup-r8a7779.c
> +++ b/arch/arm/mach-shmobile/setup-r8a7779.c
> @@ -700,8 +700,8 @@ static struct platform_device *r8a7779_standard_devices[] __initdata = {
>  void __init r8a7779_add_standard_devices(void)
>  {
>  #ifdef CONFIG_CACHE_L2X0
> -	/* Early BRESP enable, Shared attribute override enable, 64K*16way */
> -	l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff);
> +	/* Shared attribute override enable, 64K*16way */
> +	l2x0_init(IOMEM(0xf0100000), 0x00470000, 0xc2000fff);
>  #endif
>  	r8a7779_pm_init();
>  
> diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
> index 92860fa01668..dcb300443b66 100644
> --- a/arch/arm/mach-spear/spear13xx.c
> +++ b/arch/arm/mach-spear/spear13xx.c
> @@ -46,7 +46,7 @@ void __init spear13xx_l2x0_init(void)
>  	 */
>  	writel_relaxed(0x221, VA_L2CC_BASE + L310_TAG_LATENCY_CTRL);
>  	writel_relaxed(0x441, VA_L2CC_BASE + L310_DATA_LATENCY_CTRL);
> -	l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff);
> +	l2x0_init(VA_L2CC_BASE, 0x30a60001, 0xfe00ffff);
>  }
>  
>  /*
> diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
> index 6191603379e1..ecbb5411a104 100644
> --- a/arch/arm/mach-tegra/tegra.c
> +++ b/arch/arm/mach-tegra/tegra.c
> @@ -89,9 +89,9 @@ static void __init tegra_init_cache(void)
>  
>  	cache_type = readl(p + L2X0_CACHE_TYPE);
>  	aux_ctrl = (cache_type & 0x700) << (17-8);
> -	aux_ctrl |= 0x7C400001;
> +	aux_ctrl |= 0x3c400001;
>  
> -	ret = l2x0_of_init(aux_ctrl, 0x8200c3fe);
> +	ret = l2x0_of_init(aux_ctrl, 0xc200c3fe);
>  	if (!ret)
>  		l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs);
>  #endif
> -- 
> 1.8.3.1
> 

Re: [PATCH 51/97] ARM: l2c: remove platforms/SoCs setting early BRESP

[Russell King - ARM Linux]

On Tue, Apr 29, 2014 at 09:02:27AM +0900, Simon Horman wrote:
> On Mon, Apr 28, 2014 at 08:30:32PM +0100, Russell King wrote:
> > Since we now automatically enable early BRESP in core L2C-310 code when
> > we detect a Cortex-A9, we don't need platforms/SoCs to set this bit
> > explicitly.  Instead, they should seek to preserve the value of bit 30
> > in the auxiliary control register.
> > 
> > Acked-by: Tony Lindgren <tony@atomide.com>
> > Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> 
> I would prefer if this patch was broken out into individual patches
> for each board or SoC file and that they were then picked up
> by their respective platform maintainers.
> 
> Likewise for patch 66/97. Although it is only for shmobile
> I would prefer it broken out.

Oh fuck that.

Okay, I'm dropping the whole patch set right now and forgetting the whole
damned thing.  The L2 cache code can damned well stay as it is and remain
an unmaintainable mess.

-- 
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.

Re: [PATCH 51/97] ARM: l2c: remove platforms/SoCs setting early BRESP

[Grant Likely]

On Tue, 29 Apr 2014 01:21:41 +0100, Russell King - ARM Linux <linux@arm.linux.org.uk> wrote:
> On Tue, Apr 29, 2014 at 09:02:27AM +0900, Simon Horman wrote:
> > On Mon, Apr 28, 2014 at 08:30:32PM +0100, Russell King wrote:
> > > Since we now automatically enable early BRESP in core L2C-310 code when
> > > we detect a Cortex-A9, we don't need platforms/SoCs to set this bit
> > > explicitly.  Instead, they should seek to preserve the value of bit 30
> > > in the auxiliary control register.
> > > 
> > > Acked-by: Tony Lindgren <tony@atomide.com>
> > > Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> > 
> > I would prefer if this patch was broken out into individual patches
> > for each board or SoC file and that they were then picked up
> > by their respective platform maintainers.
> > 
> > Likewise for patch 66/97. Although it is only for shmobile
> > I would prefer it broken out.
> 
> Oh fuck that.
> 
> Okay, I'm dropping the whole patch set right now and forgetting the whole
> damned thing.  The L2 cache code can damned well stay as it is and remain
> an unmaintainable mess.

FWIW, there are an awful lot of people, myself included, who do care
that you've done this work. It is 100% okay for you to say "no" to
requests to split things up because of the complexity of the series.

I really hope you're reconsider and not give up on this series.

g.

Re: [PATCH 51/97] ARM: l2c: remove platforms/SoCs setting early BRESP

[Jon Loeliger]

Hi Russell,

I emphatically second Grant's opinion here:
This is a good patch series and is a much-needed improvement.

I am in the middle of a board-port for an A9 system, and this
series will greatly simplify things for me *despite* the fact that
I will need to convert to the new write_sec() form of L2C control
on PSCI-enabled non-secure platforms.

To reiterate Grant's request, please re-consider applying
this L2C patch series!

Thank you,
jdl


On Thu, May 1, 2014 at 10:12 AM, Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> wrote:
> On Tue, 29 Apr 2014 01:21:41 +0100, Russell King - ARM Linux <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org> wrote:
>> On Tue, Apr 29, 2014 at 09:02:27AM +0900, Simon Horman wrote:
>> > On Mon, Apr 28, 2014 at 08:30:32PM +0100, Russell King wrote:
>> > > Since we now automatically enable early BRESP in core L2C-310 code when
>> > > we detect a Cortex-A9, we don't need platforms/SoCs to set this bit
>> > > explicitly.  Instead, they should seek to preserve the value of bit 30
>> > > in the auxiliary control register.
>> > >
>> > > Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
>> > > Signed-off-by: Russell King <rmk+kernel-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
>> >
>> > I would prefer if this patch was broken out into individual patches
>> > for each board or SoC file and that they were then picked up
>> > by their respective platform maintainers.
>> >
>> > Likewise for patch 66/97. Although it is only for shmobile
>> > I would prefer it broken out.
>>
>> Oh fuck that.
>>
>> Okay, I'm dropping the whole patch set right now and forgetting the whole
>> damned thing.  The L2 cache code can damned well stay as it is and remain
>> an unmaintainable mess.
>
> FWIW, there are an awful lot of people, myself included, who do care
> that you've done this work. It is 100% okay for you to say "no" to
> requests to split things up because of the complexity of the series.
>
> I really hope you're reconsider and not give up on this series.
>
> g.
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 51/97] ARM: l2c: remove platforms/SoCs setting early BRESP

[Olof Johansson]

On Thu, May 1, 2014 at 8:12 AM, Grant Likely <grant.likely@secretlab.ca> wrote:
> On Tue, 29 Apr 2014 01:21:41 +0100, Russell King - ARM Linux <linux@arm.linux.org.uk> wrote:
>> On Tue, Apr 29, 2014 at 09:02:27AM +0900, Simon Horman wrote:
>> > On Mon, Apr 28, 2014 at 08:30:32PM +0100, Russell King wrote:
>> > > Since we now automatically enable early BRESP in core L2C-310 code when
>> > > we detect a Cortex-A9, we don't need platforms/SoCs to set this bit
>> > > explicitly.  Instead, they should seek to preserve the value of bit 30
>> > > in the auxiliary control register.
>> > >
>> > > Acked-by: Tony Lindgren <tony@atomide.com>
>> > > Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
>> >
>> > I would prefer if this patch was broken out into individual patches
>> > for each board or SoC file and that they were then picked up
>> > by their respective platform maintainers.
>> >
>> > Likewise for patch 66/97. Although it is only for shmobile
>> > I would prefer it broken out.
>>
>> Oh fuck that.
>>
>> Okay, I'm dropping the whole patch set right now and forgetting the whole
>> damned thing.  The L2 cache code can damned well stay as it is and remain
>> an unmaintainable mess.
>
> FWIW, there are an awful lot of people, myself included, who do care
> that you've done this work. It is 100% okay for you to say "no" to
> requests to split things up because of the complexity of the series.
>
> I really hope you're reconsider and not give up on this series.

+1. I've been very behind on email lately and I haven't paid enough
attention to this, but I'd like to see this go in for 3.16 as well,
and it shouldn't have to go in through each subtree. Sequencing that
in this case would be a huge pain indeed.

It would be better to just keep it all on a shared topic branch that
we can merge into arm-soc as a dependency, so we can resolve merge
conflicts as we merge in from platform maintainers. I wouldn't expect
anything major besides some context conflicts due to nearby edits.

The only thing I am not 100% on is if it's a good idea or not to add
to the machine descriptor, since it'll make it harder to make
descriptor-free generic platforms for A9, but it's a minor detail and
the benefit of the series outweigh that (and we can revisit if truly
needed later).


-Olof

Re: [PATCH 51/97] ARM: l2c: remove platforms/SoCs setting early BRESP

[Stephen Warren]

On 04/28/2014 06:02 PM, Simon Horman wrote:
> On Mon, Apr 28, 2014 at 08:30:32PM +0100, Russell King wrote:
>> Since we now automatically enable early BRESP in core L2C-310 code when
>> we detect a Cortex-A9, we don't need platforms/SoCs to set this bit
>> explicitly.  Instead, they should seek to preserve the value of bit 30
>> in the auxiliary control register.
>>
>> Acked-by: Tony Lindgren <tony@atomide.com>
>> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> 
> I would prefer if this patch was broken out into individual patches
> for each board or SoC file and that they were then picked up
> by their respective platform maintainers.
> 
> Likewise for patch 66/97. Although it is only for shmobile
> I would prefer it broken out.

There are far too many dependencies in this series to break out the
board file patches to be merged separately; it'd take either a whole
bunch of kernel releases to merge it all that way, or a twisty maze of
tiny topic branches cross-merged all over the place. Neither option is
realistic.

Re: [PATCH 51/97] ARM: l2c: remove platforms/SoCs setting early BRESP

[Simon Horman]

On Tue, Apr 29, 2014 at 10:17:01AM -0600, Stephen Warren wrote:
> On 04/28/2014 06:02 PM, Simon Horman wrote:
> > On Mon, Apr 28, 2014 at 08:30:32PM +0100, Russell King wrote:
> >> Since we now automatically enable early BRESP in core L2C-310 code when
> >> we detect a Cortex-A9, we don't need platforms/SoCs to set this bit
> >> explicitly.  Instead, they should seek to preserve the value of bit 30
> >> in the auxiliary control register.
> >>
> >> Acked-by: Tony Lindgren <tony@atomide.com>
> >> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> > 
> > I would prefer if this patch was broken out into individual patches
> > for each board or SoC file and that they were then picked up
> > by their respective platform maintainers.
> > 
> > Likewise for patch 66/97. Although it is only for shmobile
> > I would prefer it broken out.
> 
> There are far too many dependencies in this series to break out the
> board file patches to be merged separately; it'd take either a whole
> bunch of kernel releases to merge it all that way, or a twisty maze of
> tiny topic branches cross-merged all over the place. Neither option is
> realistic.

Understood, that seems reasonable to me.

For the shmobile portions this patch and 66/97.

Acked-by: Simon Horman <horms+renesas@verge.net.au>

[PATCH 58/97] ARM: l2c: exynos: remove cache size override

[Russell King]

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-exynos/exynos.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index e6828fb46034..a51bf25e7523 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -32,9 +32,6 @@
 #include "mfc.h"
 #include "regs-pmu.h"
 
-#define L2_AUX_VAL 0x3c470001
-#define L2_AUX_MASK 0xc200ffff
-
 static struct map_desc exynos4_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S3C_VA_SYS,
@@ -323,7 +320,7 @@ static int __init exynos4_l2x0_cache_init(void)
 {
 	int ret;
 
-	ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
+	ret = l2x0_of_init(0x3c400001, 0xc20fffff);
 	if (ret)
 		return ret;
 
-- 
1.8.3.1

[PATCH 59/97] ARM: l2c: exynos: convert to common l2c310 early resume functionality

[Russell King]

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-exynos/common.h     |  1 -
 arch/arm/mach-exynos/exynos.c     | 12 +-----------
 arch/arm/mach-exynos/sleep.S      | 30 +-----------------------------
 arch/arm/plat-samsung/s5p-sleep.S |  1 -
 4 files changed, 2 insertions(+), 42 deletions(-)

diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 9ef3f83efaff..88c619d1e145 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -55,7 +55,6 @@ enum sys_powerdown {
 	NUM_SYS_POWERDOWN,
 };
 
-extern unsigned long l2x0_regs_phys;
 struct exynos_pmu_conf {
 	void __iomem *reg;
 	unsigned int val[NUM_SYS_POWERDOWN];
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index a51bf25e7523..fbfc29df3299 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -318,17 +318,7 @@ core_initcall(exynos_core_init);
 
 static int __init exynos4_l2x0_cache_init(void)
 {
-	int ret;
-
-	ret = l2x0_of_init(0x3c400001, 0xc20fffff);
-	if (ret)
-		return ret;
-
-	if (IS_ENABLED(CONFIG_S5P_SLEEP)) {
-		l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
-		clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
-	}
-	return 0;
+	return l2x0_of_init(0x3c400001, 0xc20fffff);
 }
 early_initcall(exynos4_l2x0_cache_init);
 
diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S
index 7e0af530511e..108a45f4bb62 100644
--- a/arch/arm/mach-exynos/sleep.S
+++ b/arch/arm/mach-exynos/sleep.S
@@ -16,8 +16,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
 
 #define CPU_MASK	0xff0ffff0
 #define CPU_CORTEX_A9	0x410fc090
@@ -53,33 +51,7 @@ ENTRY(exynos_cpu_resume)
 	and	r0, r0, r1
 	ldr	r1, =CPU_CORTEX_A9
 	cmp	r0, r1
-	bne	skip_l2_resume
-	adr	r0, l2x0_regs_phys
-	ldr	r0, [r0]
-	cmp	r0, #0
-	beq	skip_l2_resume
-	ldr	r1, [r0, #L2X0_R_PHY_BASE]
-	ldr	r2, [r1, #L2X0_CTRL]
-	tst	r2, #0x1
-	bne	skip_l2_resume
-	ldr	r2, [r0, #L2X0_R_AUX_CTRL]
-	str	r2, [r1, #L2X0_AUX_CTRL]
-	ldr	r2, [r0, #L2X0_R_TAG_LATENCY]
-	str	r2, [r1, #L310_TAG_LATENCY_CTRL]
-	ldr	r2, [r0, #L2X0_R_DATA_LATENCY]
-	str	r2, [r1, #L310_DATA_LATENCY_CTRL]
-	ldr	r2, [r0, #L2X0_R_PREFETCH_CTRL]
-	str	r2, [r1, #L310_PREFETCH_CTRL]
-	ldr	r2, [r0, #L2X0_R_PWR_CTRL]
-	str	r2, [r1, #L310_POWER_CTRL]
-	mov	r2, #1
-	str	r2, [r1, #L2X0_CTRL]
-skip_l2_resume:
+	bleq	l2c310_early_resume
 #endif
 	b	cpu_resume
 ENDPROC(exynos_cpu_resume)
-#ifdef CONFIG_CACHE_L2X0
-	.globl l2x0_regs_phys
-l2x0_regs_phys:
-	.long	0
-#endif
diff --git a/arch/arm/plat-samsung/s5p-sleep.S b/arch/arm/plat-samsung/s5p-sleep.S
index c5001659bdf8..25c68ceb9e2b 100644
--- a/arch/arm/plat-samsung/s5p-sleep.S
+++ b/arch/arm/plat-samsung/s5p-sleep.S
@@ -22,7 +22,6 @@
 */
 
 #include <linux/linkage.h>
-#include <asm/asm-offsets.h>
 
 	.data
 	.align
-- 
1.8.3.1

[PATCH 60/97] ARM: l2c: exynos: convert to generic l2c initialisation (and thereby fix it)

[Russell King]

exynos was unconditionally calling the L2 cache initialisation from an
early_initcall.  This breaks multiplatform kernels.  Thankfully,
converting to generic l2c initialisation fixes this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-exynos/exynos.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index fbfc29df3299..a763c0862da9 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -316,12 +316,6 @@ static int __init exynos_core_init(void)
 }
 core_initcall(exynos_core_init);
 
-static int __init exynos4_l2x0_cache_init(void)
-{
-	return l2x0_of_init(0x3c400001, 0xc20fffff);
-}
-early_initcall(exynos4_l2x0_cache_init);
-
 static void __init exynos_dt_machine_init(void)
 {
 	struct device_node *i2c_np;
@@ -387,6 +381,8 @@ static void __init exynos_reserve(void)
 DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
 	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.l2c_aux_val	= 0x3c400001,
+	.l2c_aux_mask	= 0xc20fffff,
 	.smp		= smp_ops(exynos_smp_ops),
 	.map_io		= exynos_init_io,
 	.init_early	= exynos_firmware_init,
-- 
1.8.3.1