* [PATCH v2] ARM: dts: add CPU nodes for Exynos4 SoCs
@ 2014-07-21 13:57 Bartlomiej Zolnierkiewicz
2014-07-24 23:31 ` Kukjin Kim
0 siblings, 1 reply; 2+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2014-07-21 13:57 UTC (permalink / raw)
To: linux-samsung-soc
Cc: linux-arm-kernel, linux-kernel, Kukjin Kim, Marek Szyprowski,
Lorenzo Pieralisi, Tomasz Figa, Mark Rutland, Thomas Abraham
Recent patch by Tomasz Figa ("irqchip: gic: Fix core ID calculation
when topology is read from DT") fixed GIC driver to filter cluster ID
from values returned by cpu_logical_map() for SoCs having registers
mapped without per-CPU banking making it is possible to add CPU nodes
for Exynos4 SoCs. In case of Exynos SoCs these CPU nodes are also
required by future changes adding initialization of cpuidle states in
Exynos cpuidle driver through DT.
Tested on Origen board (Exynos4210 SoC) and Trats2 (Exynos4412 SoC).
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
Based on next-20140717 branch of linux-next tree +
- [PATCH 2/6] ARM: EXYNOS: Fix core ID used by platsmp and hotplug code
http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg32811.html
- [PATCH] irqchip: gic: Fix core ID calculation when topology is read from DT
http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg34277.html
v2:
- match the unit-address with the reg
arch/arm/boot/dts/exynos4210.dtsi | 17 +++++++++++++++++
arch/arm/boot/dts/exynos4212.dtsi | 17 +++++++++++++++++
arch/arm/boot/dts/exynos4412.dtsi | 29 +++++++++++++++++++++++++++++
3 files changed, 63 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index ee3001f..bc2b444 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -31,6 +31,23 @@
pinctrl2 = &pinctrl_2;
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@900 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x900>;
+ };
+
+ cpu@901 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x901>;
+ };
+ };
+
sysram@02020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x20000>;
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index 3c00e6e..dd0a43e 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -22,6 +22,23 @@
/ {
compatible = "samsung,exynos4212", "samsung,exynos4";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@A00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA00>;
+ };
+
+ cpu@A01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA01>;
+ };
+ };
+
combiner: interrupt-controller@10440000 {
samsung,combiner-nr = <18>;
};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index c42a3e1..435a722 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -22,6 +22,35 @@
/ {
compatible = "samsung,exynos4412", "samsung,exynos4";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@A00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA00>;
+ };
+
+ cpu@A01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA01>;
+ };
+
+ cpu@A02 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA02>;
+ };
+
+ cpu@A03 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA03>;
+ };
+ };
+
combiner: interrupt-controller@10440000 {
samsung,combiner-nr = <20>;
};
--
1.8.2.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] ARM: dts: add CPU nodes for Exynos4 SoCs
2014-07-21 13:57 [PATCH v2] ARM: dts: add CPU nodes for Exynos4 SoCs Bartlomiej Zolnierkiewicz
@ 2014-07-24 23:31 ` Kukjin Kim
0 siblings, 0 replies; 2+ messages in thread
From: Kukjin Kim @ 2014-07-24 23:31 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz
Cc: linux-samsung-soc, Mark Rutland, Lorenzo Pieralisi,
Thomas Abraham, Tomasz Figa, linux-kernel, Kukjin Kim,
linux-arm-kernel, Marek Szyprowski
On 07/21/14 22:57, Bartlomiej Zolnierkiewicz wrote:
> Recent patch by Tomasz Figa ("irqchip: gic: Fix core ID calculation
> when topology is read from DT") fixed GIC driver to filter cluster ID
> from values returned by cpu_logical_map() for SoCs having registers
> mapped without per-CPU banking making it is possible to add CPU nodes
> for Exynos4 SoCs. In case of Exynos SoCs these CPU nodes are also
> required by future changes adding initialization of cpuidle states in
> Exynos cpuidle driver through DT.
>
> Tested on Origen board (Exynos4210 SoC) and Trats2 (Exynos4412 SoC).
>
> Signed-off-by: Bartlomiej Zolnierkiewicz<b.zolnierkie@samsung.com>
> ---
> Based on next-20140717 branch of linux-next tree +
> - [PATCH 2/6] ARM: EXYNOS: Fix core ID used by platsmp and hotplug code
> http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg32811.html
> - [PATCH] irqchip: gic: Fix core ID calculation when topology is read from DT
> http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg34277.html
>
> v2:
> - match the unit-address with the reg
>
> arch/arm/boot/dts/exynos4210.dtsi | 17 +++++++++++++++++
> arch/arm/boot/dts/exynos4212.dtsi | 17 +++++++++++++++++
> arch/arm/boot/dts/exynos4412.dtsi | 29 +++++++++++++++++++++++++++++
> 3 files changed, 63 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
> index ee3001f..bc2b444 100644
> --- a/arch/arm/boot/dts/exynos4210.dtsi
> +++ b/arch/arm/boot/dts/exynos4210.dtsi
> @@ -31,6 +31,23 @@
> pinctrl2 =&pinctrl_2;
> };
>
> + cpus {
> + #address-cells =<1>;
> + #size-cells =<0>;
> +
> + cpu@900 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + reg =<0x900>;
> + };
> +
> + cpu@901 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + reg =<0x901>;
> + };
> + };
> +
> sysram@02020000 {
> compatible = "mmio-sram";
> reg =<0x02020000 0x20000>;
> diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
> index 3c00e6e..dd0a43e 100644
> --- a/arch/arm/boot/dts/exynos4212.dtsi
> +++ b/arch/arm/boot/dts/exynos4212.dtsi
> @@ -22,6 +22,23 @@
> / {
> compatible = "samsung,exynos4212", "samsung,exynos4";
>
> + cpus {
> + #address-cells =<1>;
> + #size-cells =<0>;
> +
> + cpu@A00 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + reg =<0xA00>;
> + };
> +
> + cpu@A01 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + reg =<0xA01>;
> + };
> + };
> +
> combiner: interrupt-controller@10440000 {
> samsung,combiner-nr =<18>;
> };
> diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
> index c42a3e1..435a722 100644
> --- a/arch/arm/boot/dts/exynos4412.dtsi
> +++ b/arch/arm/boot/dts/exynos4412.dtsi
> @@ -22,6 +22,35 @@
> / {
> compatible = "samsung,exynos4412", "samsung,exynos4";
>
> + cpus {
> + #address-cells =<1>;
> + #size-cells =<0>;
> +
> + cpu@A00 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + reg =<0xA00>;
> + };
> +
> + cpu@A01 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + reg =<0xA01>;
> + };
> +
> + cpu@A02 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + reg =<0xA02>;
> + };
> +
> + cpu@A03 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + reg =<0xA03>;
> + };
> + };
> +
> combiner: interrupt-controller@10440000 {
> samsung,combiner-nr =<20>;
> };
OK, I'm fine on this, will apply.
Thanks,
Kukjin
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-07-24 23:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-07-21 13:57 [PATCH v2] ARM: dts: add CPU nodes for Exynos4 SoCs Bartlomiej Zolnierkiewicz
2014-07-24 23:31 ` Kukjin Kim
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox