Linux Samsung SOC development
 help / color / mirror / Atom feed
From: "Krzysztof Kozłowski" <k.kozlowski@samsung.com>
To: Inki Dae <inki.dae@samsung.com>,
	airlied@linux.ie, dri-devel@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH] drm/exynos: resolve infinite loop issue on multi-platform
Date: Thu, 06 Nov 2014 13:11:27 +0100	[thread overview]
Message-ID: <545B656F.40401@samsung.com> (raw)
In-Reply-To: <1415269965-427-1-git-send-email-inki.dae@samsung.com>

On 06.11.2014 11:32, Inki Dae wrote:
> This patch resolves temporarily infinite loop issue incurred
> when Exynos drm driver is enabled and multi-platform kernel
> is used by registering Exynos drm device object only in case
> of Exynos SoC. So this patch will be replaced with more generic
> way later.

Does not help for Rinato board.

On Rinato:
-----------------------
Failed to find PMU node
Registering SWP/SWPB emulation handler
mmc0: BKOPS_EN bit is not set
mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz,
actual 100000000HZ div = 0)
exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
mmc0: new HS200 MMC card at address 0001
platform exynos-drm: Driver exynos-drm requests probe deferral
mmcblk0: mmc0:0001 F5X5MA 3.64 GiB
mmcblk0boot0: mmc0:0001 F5X5MA partition 1 4.00 MiB
exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
mmcblk0boot1: mmc0:0001 F5X5MA partition 2 4.00 MiB
platform exynos-drm: Driver exynos-drm requests probe deferral
mmcblk0rpmb: mmc0:0001 F5X5MA partition 3 512 KiB
exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
platform exynos-drm: Driver exynos-drm requests probe deferral
 mmcblk0: p1 p2 p3 p4 p5 p6 p7
exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
platform exynos-drm: Driver exynos-drm requests probe deferral
exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
platform exynos-drm: Driver exynos-drm requests probe deferral

and so on...
-----------------------

I do not know whether it is related but Trats2 board cannot boot due to
lockup after:
[drm] Initialized drm 1.1.0 20060810
(with or without the patch)
https://lkml.org/lkml/2014/11/6/125

Best regards,
Krzysztof

> 
> Signed-off-by: Inki Dae <inki.dae@samsung.com>
> ---
>  drivers/gpu/drm/exynos/exynos_drm_drv.c |   12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
> index 443a206..ecc86aa 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
> @@ -734,6 +734,18 @@ static int exynos_drm_init(void)
>  {
>  	int ret;
>  
> +	/*
> +	 * Register device object only in case of Exynos SoC.
> +	 *
> +	 * Below codes resolves temporarily infinite loop issue incurred
> +	 * by Exynos drm driver when using multi-platform kernel.
> +	 * So these codes will be replaced with more generic way later.
> +	 */
> +	if (!of_machine_is_compatible("samsung,exynos3") &&
> +			!of_machine_is_compatible("samsung,exynos4") &&
> +			!of_machine_is_compatible("samsung,exynos5"))
> +		return -ENODEV;
> +
>  	exynos_drm_pdev = platform_device_register_simple("exynos-drm", -1,
>  								NULL, 0);
>  	if (IS_ERR(exynos_drm_pdev))
> 

  reply	other threads:[~2014-11-06 12:11 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-06 10:32 [PATCH] drm/exynos: resolve infinite loop issue on multi-platform Inki Dae
2014-11-06 12:11 ` Krzysztof Kozłowski [this message]
2014-11-06 12:32   ` Inki Dae
2014-11-06 13:00     ` Krzysztof Kozlowski
2014-11-06 13:44       ` Inki Dae

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=545B656F.40401@samsung.com \
    --to=k.kozlowski@samsung.com \
    --cc=airlied@linux.ie \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=inki.dae@samsung.com \
    --cc=linux-samsung-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox