From: Inki Dae <inki.dae@samsung.com>
To: "Krzysztof Kozłowski" <k.kozlowski@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH] drm/exynos: resolve infinite loop issue on multi-platform
Date: Thu, 06 Nov 2014 21:32:34 +0900 [thread overview]
Message-ID: <545B6A62.7060305@samsung.com> (raw)
In-Reply-To: <545B656F.40401@samsung.com>
On 2014년 11월 06일 21:11, Krzysztof Kozłowski wrote:
> On 06.11.2014 11:32, Inki Dae wrote:
>> This patch resolves temporarily infinite loop issue incurred
>> when Exynos drm driver is enabled and multi-platform kernel
>> is used by registering Exynos drm device object only in case
>> of Exynos SoC. So this patch will be replaced with more generic
>> way later.
>
> Does not help for Rinato board.
>
> On Rinato:
> -----------------------
> Failed to find PMU node
> Registering SWP/SWPB emulation handler
> mmc0: BKOPS_EN bit is not set
> mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz,
> actual 100000000HZ div = 0)
> exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
> mmc0: new HS200 MMC card at address 0001
> platform exynos-drm: Driver exynos-drm requests probe deferral
> mmcblk0: mmc0:0001 F5X5MA 3.64 GiB
> mmcblk0boot0: mmc0:0001 F5X5MA partition 1 4.00 MiB
> exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
> mmcblk0boot1: mmc0:0001 F5X5MA partition 2 4.00 MiB
> platform exynos-drm: Driver exynos-drm requests probe deferral
> mmcblk0rpmb: mmc0:0001 F5X5MA partition 3 512 KiB
> exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
> platform exynos-drm: Driver exynos-drm requests probe deferral
> mmcblk0: p1 p2 p3 p4 p5 p6 p7
> exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
> platform exynos-drm: Driver exynos-drm requests probe deferral
> exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
> platform exynos-drm: Driver exynos-drm requests probe deferral
>
> and so on...
> -----------------------
Can you show me compatible string placed on top of exynos3250-rinato.dts
file? If the compatible has "samsung,exynos3" it should be no problem
with this patch. And the rinato dts file we posted to mainline has the
compatible string.
>
> I do not know whether it is related but Trats2 board cannot boot due to
> lockup after:
> [drm] Initialized drm 1.1.0 20060810
> (with or without the patch)
> https://lkml.org/lkml/2014/11/6/125
>
hmm... it's strange because my trats2 board works well with this patch.
Which kernel did you test? And how can I reproduce above lockup?
Thanks,
Inki Dae
> Best regards,
> Krzysztof
>
>>
>> Signed-off-by: Inki Dae <inki.dae@samsung.com>
>> ---
>> drivers/gpu/drm/exynos/exynos_drm_drv.c | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> index 443a206..ecc86aa 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> @@ -734,6 +734,18 @@ static int exynos_drm_init(void)
>> {
>> int ret;
>>
>> + /*
>> + * Register device object only in case of Exynos SoC.
>> + *
>> + * Below codes resolves temporarily infinite loop issue incurred
>> + * by Exynos drm driver when using multi-platform kernel.
>> + * So these codes will be replaced with more generic way later.
>> + */
>> + if (!of_machine_is_compatible("samsung,exynos3") &&
>> + !of_machine_is_compatible("samsung,exynos4") &&
>> + !of_machine_is_compatible("samsung,exynos5"))
>> + return -ENODEV;
>> +
>> exynos_drm_pdev = platform_device_register_simple("exynos-drm", -1,
>> NULL, 0);
>> if (IS_ERR(exynos_drm_pdev))
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2014-11-06 12:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-06 10:32 [PATCH] drm/exynos: resolve infinite loop issue on multi-platform Inki Dae
2014-11-06 12:11 ` Krzysztof Kozłowski
2014-11-06 12:32 ` Inki Dae [this message]
2014-11-06 13:00 ` Krzysztof Kozlowski
2014-11-06 13:44 ` Inki Dae
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=545B6A62.7060305@samsung.com \
--to=inki.dae@samsung.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=k.kozlowski@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox