From: Joonyoung Shim <jy0922.shim@samsung.com>
To: Gustavo Padovan <gustavo@padovan.org>, linux-samsung-soc@vger.kernel.org
Cc: tjakobi@math.uni-bielefeld.de,
Gustavo Padovan <gustavo.padovan@collabora.co.uk>,
dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v8 02/14] drm/exynos: atomic phase 1: use drm_plane_helper_update()
Date: Thu, 28 May 2015 17:24:26 +0900 [thread overview]
Message-ID: <5566D0BA.9070006@samsung.com> (raw)
In-Reply-To: <1432760183-4342-3-git-send-email-gustavo@padovan.org>
On 05/28/2015 05:56 AM, Gustavo Padovan wrote:
> From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
>
> Rip out the check from exynos_update_plane() and create
> exynos_check_plane() for the check phase enabling use to use
> the atomic helpers to call our check and update phases when updating
> planes.
>
> Update all users of exynos_update_plane() accordingly to call
> exynos_check_plane() before.
>
> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>y
> ---
> drivers/gpu/drm/exynos/exynos_drm_crtc.c | 31 ++++++++++++------------
> drivers/gpu/drm/exynos/exynos_drm_plane.c | 40 +++++++++++++++++++++++--------
> drivers/gpu/drm/exynos/exynos_drm_plane.h | 2 +-
> 3 files changed, 47 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> index 363b019..ba44c9b 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> @@ -116,6 +116,7 @@ static int exynos_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
> struct drm_framebuffer *fb = crtc->primary->fb;
> unsigned int crtc_w;
> unsigned int crtc_h;
> + int ret;
>
> /* when framebuffer changing is requested, crtc's dpms should be on */
> if (exynos_crtc->dpms > DRM_MODE_DPMS_ON) {
> @@ -123,12 +124,17 @@ static int exynos_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
> return -EPERM;
> }
>
> + ret = exynos_check_plane(crtc->primary, fb);
> + if (ret)
> + return ret;
> +
> crtc_w = fb->width - x;
> crtc_h = fb->height - y;
> + exynos_update_plane(crtc->primary, crtc, fb, 0, 0,
> + crtc_w, crtc_h, x << 16, y << 16,
> + crtc_w << 16, crtc_h << 16);
>
> - return exynos_update_plane(crtc->primary, crtc, fb, 0, 0,
> - crtc_w, crtc_h, x << 16, y << 16,
> - crtc_w << 16, crtc_h << 16);
> + return 0;
> }
>
> static void exynos_drm_crtc_disable(struct drm_crtc *crtc)
> @@ -165,7 +171,6 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc,
> {
> struct drm_device *dev = crtc->dev;
> struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
> - struct drm_framebuffer *old_fb = crtc->primary->fb;
> unsigned int crtc_w, crtc_h;
> int ret;
>
> @@ -184,6 +189,10 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc,
> goto out;
> }
>
> + ret = exynos_check_plane(crtc->primary, fb);
> + if (ret)
> + goto out;
> +
> ret = drm_vblank_get(dev, exynos_crtc->pipe);
> if (ret) {
> DRM_DEBUG("failed to acquire vblank counter\n");
> @@ -202,17 +211,9 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc,
> crtc->primary->fb = fb;
> crtc_w = fb->width - crtc->x;
> crtc_h = fb->height - crtc->y;
> - ret = exynos_update_plane(crtc->primary, crtc, fb, 0, 0,
> - crtc_w, crtc_h, crtc->x << 16, crtc->y << 16,
> - crtc_w << 16, crtc_h << 16);
> - if (ret) {
> - crtc->primary->fb = old_fb;
> - spin_lock_irq(&dev->event_lock);
> - exynos_crtc->event = NULL;
> - drm_vblank_put(dev, exynos_crtc->pipe);
> - spin_unlock_irq(&dev->event_lock);
> - return ret;
> - }
> + exynos_update_plane(crtc->primary, crtc, fb, 0, 0,
> + crtc_w, crtc_h, crtc->x << 16, crtc->y << 16,
> + crtc_w << 16, crtc_h << 16);
>
> return 0;
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c
> index b1180fb..b218b7a 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c
> @@ -144,21 +144,15 @@ void exynos_plane_mode_set(struct drm_plane *plane, struct drm_crtc *crtc,
> plane->crtc = crtc;
> }
>
> -int
> +void
> exynos_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
> struct drm_framebuffer *fb, int crtc_x, int crtc_y,
> unsigned int crtc_w, unsigned int crtc_h,
> uint32_t src_x, uint32_t src_y,
> uint32_t src_w, uint32_t src_h)
> {
> -
> struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
> struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane);
> - int ret;
> -
> - ret = exynos_check_plane(plane, fb);
> - if (ret < 0)
> - return ret;
>
> exynos_plane_mode_set(plane, crtc, fb, crtc_x, crtc_y,
> crtc_w, crtc_h, src_x >> 16, src_y >> 16,
> @@ -166,8 +160,6 @@ exynos_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>
> if (exynos_crtc->ops->win_commit)
> exynos_crtc->ops->win_commit(exynos_crtc, exynos_plane->zpos);
> -
> - return 0;
> }
>
> static int exynos_disable_plane(struct drm_plane *plane)
> @@ -183,11 +175,37 @@ static int exynos_disable_plane(struct drm_plane *plane)
> }
>
> static struct drm_plane_funcs exynos_plane_funcs = {
> - .update_plane = exynos_update_plane,
> + .update_plane = drm_plane_helper_update,
> .disable_plane = exynos_disable_plane,
> .destroy = drm_plane_cleanup,
> };
>
> +static int exynos_plane_atomic_check(struct drm_plane *plane,
> + struct drm_plane_state *state)
> +{
> + return exynos_check_plane(plane, state->fb);
> +}
> +
> +static void exynos_plane_atomic_update(struct drm_plane *plane,
> + struct drm_plane_state *old_state)
> +{
> + struct drm_plane_state *state = plane->state;
> +
> + if (!state->crtc)
> + return;
> +
> + exynos_update_plane(plane, state->crtc, state->fb,
> + state->crtc_x, state->crtc_y,
> + state->crtc_w, state->crtc_h,
> + state->src_x >> 16, state->src_y >> 16,
> + state->src_w >> 16, state->src_h >> 16);
should be
+ state->src_x, state->src_y,
+ state->src_w, state->src_h);
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-05-28 8:24 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-27 20:56 [PATCH v8 00/14] drm/exynos: atomic modesetting support Gustavo Padovan
2015-05-27 20:56 ` [PATCH v8 01/14] drm/exynos: fix source data argument for plane Gustavo Padovan
2015-05-27 20:56 ` [PATCH v8 02/14] drm/exynos: atomic phase 1: use drm_plane_helper_update() Gustavo Padovan
2015-05-28 8:24 ` Joonyoung Shim [this message]
2015-05-27 20:56 ` [PATCH v8 03/14] drm/exynos: atomic phase 1: use drm_plane_helper_disable() Gustavo Padovan
2015-05-27 20:56 ` [PATCH v8 04/14] drm/exynos: atomic phase 1: add .mode_set_nofb() callback Gustavo Padovan
2015-05-28 8:24 ` Joonyoung Shim
2015-05-29 6:21 ` Joonyoung Shim
2015-05-27 20:56 ` [PATCH v8 05/14] drm/exynos: atomic phase 2: wire up state reset(), duplicate() and destroy() Gustavo Padovan
2015-05-27 20:56 ` [PATCH v8 06/14] drm/exynos: atomic phase 2: keep track of framebuffer pointer Gustavo Padovan
2015-05-27 20:56 ` [PATCH v8 07/14] drm/exynos: atomic phase 3: atomic updates of planes Gustavo Padovan
2015-05-27 20:56 ` [PATCH v8 08/14] drm/exynos: atomic phase 3: use atomic .set_config helper Gustavo Padovan
2015-05-28 8:25 ` Joonyoung Shim
2015-05-27 20:56 ` [PATCH v8 09/14] drm/exynos: atomic phase 3: convert page flips Gustavo Padovan
2015-05-27 20:56 ` [PATCH v8 10/14] drm/exynos: remove exported functions from exynos_drm_plane Gustavo Padovan
2015-05-27 20:56 ` [PATCH v8 11/14] drm/exynos: don't disable unused functions at init Gustavo Padovan
2015-05-27 20:56 ` [PATCH v8 12/14] drm/exynos: move exynos_drm_crtc_disable() Gustavo Padovan
2015-05-27 20:56 ` [PATCH v8 13/14] drm/exynos: atomic dpms support Gustavo Padovan
2015-05-27 20:56 ` [PATCH v8 14/14] drm/exynos: remove unnecessary calls to disable_plane() Gustavo Padovan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5566D0BA.9070006@samsung.com \
--to=jy0922.shim@samsung.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=gustavo.padovan@collabora.co.uk \
--cc=gustavo@padovan.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=tjakobi@math.uni-bielefeld.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox