[PATCH v4 0/4] Add minimal Samsung Galaxy S20 Series board, SM-G981B and SM-G980F support

[PATCH v4 0/4] Add minimal Samsung Galaxy S20 Series board, SM-G981B and SM-G980F support

[Umer Uddin]

Hi folks,

This series adds initial support for the Samsung Galaxy S20 Series and also
initial board support for the Samsung Galaxy S20 5G (SM-G981B)
codenamed x1s.

The S20 Series feature a lot of similarities in their configuration
and internally Samsung named the common devicetrees in their
downstream kernel 'hubble', please note hubble excludes the
S20 FE series and Note20 series. To accomodate this, I've
now named the device tree common's matching the codenames
(x1s-common).
The device trees have been tested with dtbs_check W=1
and results in no warnings.

This initial bringup consists of:
 * pinctrl
 * gpio-keys
 * simple-framebuffer

This is enough to reach a shell in an initramfs. More platform support
will be added in the future.

Just like SM-N981B, the preferred way to boot the upstream kernel is
by using a shim bootloader, called uniLoader [1], which works around
some issues with the stock, non-replacable Samsung S-LK bootloader.
For example, the stock bootloader leaves the decon trigger control
unset, which causes the framebuffer not to refresh.

Device functionality depends on the patch series from Igor Belwon:
"Add minimal Exynos990 SoC and SM-N981B support"

[1] https://github.com/ivoszbg/uniLoader

Changes in v4:
 - Rebase from krzk's kernel tree to accomodate
   for the merge of r8s
 - Rename exynos990-hubble-common.dtsi
   to exynos990-x1s-common.dtsi

Changes in v3:
 - Fix oversight in yaml
 - Decommonise memory map

Changes in v2:
 - Add Samsung Galaxy S20 into device tree bindings
 - Add support for Samsung Galaxy S20 as well as the 5G variant now
 - Fix typo in Samsung Galaxy S20 5G commit message

Kind regards,
Umer

Umer Uddin (4):
  dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B
    and SM-G980F board
  arm64: dts: exynos: Add initial support for Samsung Galaxy S20 Series
    boards (hubble)
  arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G
    (x1s)
  arm64: dts: exynos: Add initial support for Samsung Galaxy S20
    (x1slte)

 .../bindings/arm/samsung/samsung-boards.yaml  |  2 +
 arch/arm64/boot/dts/exynos/Makefile           |  2 +
 .../boot/dts/exynos/exynos990-x1s-common.dtsi | 98 +++++++++++++++++++
 arch/arm64/boot/dts/exynos/exynos990-x1s.dts  | 28 ++++++
 .../boot/dts/exynos/exynos990-x1slte.dts      | 28 ++++++
 5 files changed, 158 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos990-x1s.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynos990-x1slte.dts

-- 
2.47.1

[PATCH v4 1/4] dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B and SM-G980F board

[Umer Uddin]

Add devicetree bindings for Samsung Galaxy S20 5G
and Samsung Galaxy S20 board.

Signed-off-by: Umer Uddin <umer.uddin@mentallysanemainliners.org>
---
 .../devicetree/bindings/arm/samsung/samsung-boards.yaml         | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index 168e77375..fab29f95d 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -241,6 +241,8 @@ properties:
           - enum:
               - samsung,c1s                     # Samsung Galaxy Note20 5G (SM-N981B)
               - samsung,r8s                     # Samsung Galaxy S20 FE (SM-G780F)
+              - samsung,x1s                     # Samsung Galaxy S20 5G (SM-G981B)
+              - samsung,x1slte                  # Samsung Galaxy S20 (SM-G980F)
           - const: samsung,exynos990
 
       - description: Exynos Auto v9 based boards
-- 
2.47.1

[PATCH v4 2/4] arm64: dts: exynos: Add initial support for Samsung Galaxy S20 Series boards (hubble)

[Umer Uddin]

Add initial support for the Samsung Galaxy S20 Series (hubble) phones.
They were launched in 2020, and are based on the Exynos 990 SoC.
The devices have multiple RAM configurations,
starting from 8GB going all the way up to 16GB for the S20 Ultra devices.

This device tree adds support for the following:

- SimpleFB
- 8GB RAM (Any more will be mapped in device trees)
- Buttons

Signed-off-by: Umer Uddin <umer.uddin@mentallysanemainliners.org>
---
 .../boot/dts/exynos/exynos990-x1s-common.dtsi | 98 +++++++++++++++++++
 1 file changed, 98 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi

diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi b/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
new file mode 100644
index 000000000..55fa8e9e0
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 Series device tree source
+ *
+ * Copyright (c) 2024, Umer Uddin <umer.uddin@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@f1000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xf1000000 0 (1440 * 3200 * 4)>;
+			width = <1440>;
+			height = <3200>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: framebuffer@f1000000 {
+			reg = <0 0xf1000000 0 0x1194000>;
+			no-map;
+		};
+
+		abox_reserved: audio@f7fb0000 {
+			reg = <0 0xf7fb0000 0 0x2a50000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
-- 
2.47.1

[PATCH v4 3/4] arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)

[Umer Uddin]

Add initial support for the Samsung Galaxy S20 5G (x1s/SM-G981B)
phone. It was launched in 2020, and it's based on the Exynos 990 SoC. It
has only one configuration with 12GB of RAM and 128GB of UFS 3.0 storage.

This device tree adds support for the following:

- SimpleFB
- 12GB RAM
- Buttons

Signed-off-by: Umer Uddin <umer.uddin@mentallysanemainliners.org>
---
 arch/arm64/boot/dts/exynos/Makefile          |  1 +
 arch/arm64/boot/dts/exynos/exynos990-x1s.dts | 28 ++++++++++++++++++++
 2 files changed, 29 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos990-x1s.dts

diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 948a2c6cb..6959acfbb 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \
 	exynos850-e850-96.dtb		\
 	exynos8895-dreamlte.dtb		\
 	exynos990-c1s.dtb		\
+	exynos990-x1s.dtb		\
 	exynos990-r8s.dtb               \
 	exynosautov9-sadk.dtb		\
 	exynosautov920-sadk.dtb
diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1s.dts b/arch/arm64/boot/dts/exynos/exynos990-x1s.dts
new file mode 100644
index 000000000..1ae881015
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1s.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 5G (x1s/SM-G981B) device tree source
+ *
+ * Copyright (c) 2024, Umer Uddin <umer.uddin@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990-x1s-common.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Samsung Galaxy S20 5G";
+	compatible = "samsung,x1s", "samsung,exynos990";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x3ab00000>,
+		      /* Memory hole */
+		      <0x0 0xc1200000 0x0 0x1ee00000>,
+		      /* Memory hole */
+		      <0x0 0xe1900000 0x0 0x1e700000>,
+		      /* Memory hole */
+		      <0x8 0x80000000 0x2 0x7e800000>;
+	};
+};
-- 
2.47.1

[PATCH v4 4/4] arm64: dts: exynos: Add initial support for Samsung Galaxy S20 (x1slte)

[Umer Uddin]

Add initial support for the Samsung Galaxy S20 (x1slte/SM-G980F)
phone. It was launched in 2020, and it's based on the Exynos 990 SoC. It
has only one configuration with 8GB of RAM and 128GB of UFS 3.0 storage.

This device tree adds support for the following:

- SimpleFB
- 8GB RAM
- Buttons

Signed-off-by: Umer Uddin <umer.uddin@mentallysanemainliners.org>
---
 arch/arm64/boot/dts/exynos/Makefile           |  1 +
 .../boot/dts/exynos/exynos990-x1slte.dts      | 28 +++++++++++++++++++
 2 files changed, 29 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos990-x1slte.dts

diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 6959acfbb..b546b883a 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \
 	exynos8895-dreamlte.dtb		\
 	exynos990-c1s.dtb		\
 	exynos990-x1s.dtb		\
+	exynos990-x1slte.dtb		\
 	exynos990-r8s.dtb               \
 	exynosautov9-sadk.dtb		\
 	exynosautov920-sadk.dtb
diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts b/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts
new file mode 100644
index 000000000..d3720996b
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 (x1slte/SM-G980F) device tree source
+ *
+ * Copyright (c) 2024, Umer Uddin <umer.uddin@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990-x1s-common.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Samsung Galaxy S20";
+	compatible = "samsung,x1slte", "samsung,exynos990";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x3ab00000>,
+		      /* Memory hole */
+		      <0x0 0xc1200000 0x0 0x1ee00000>,
+		      /* Memory hole */
+		      <0x0 0xe1900000 0x0 0x1e700000>,
+		      /* Memory hole */
+		      <0x8 0x80000000 0x1 0x7ec00000>;
+	};
+};
-- 
2.47.1

Re: [PATCH v4 0/4] Add minimal Samsung Galaxy S20 Series board, SM-G981B and SM-G980F support

[Krzysztof Kozlowski]

On Tue, Dec 03, 2024 at 08:03:22AM +0000, Umer Uddin wrote:
> Hi folks,
> 
> This series adds initial support for the Samsung Galaxy S20 Series and also
> initial board support for the Samsung Galaxy S20 5G (SM-G981B)
> codenamed x1s.
> 
> The S20 Series feature a lot of similarities in their configuration
> and internally Samsung named the common devicetrees in their
> downstream kernel 'hubble', please note hubble excludes the
> S20 FE series and Note20 series. To accomodate this, I've
> now named the device tree common's matching the codenames
> (x1s-common).
> The device trees have been tested with dtbs_check W=1
> and results in no warnings.
> 
> This initial bringup consists of:
>  * pinctrl
>  * gpio-keys
>  * simple-framebuffer
> 
> This is enough to reach a shell in an initramfs. More platform support
> will be added in the future.
> 
> Just like SM-N981B, the preferred way to boot the upstream kernel is
> by using a shim bootloader, called uniLoader [1], which works around
> some issues with the stock, non-replacable Samsung S-LK bootloader.
> For example, the stock bootloader leaves the decon trigger control
> unset, which causes the framebuffer not to refresh.
> 
> Device functionality depends on the patch series from Igor Belwon:
> "Add minimal Exynos990 SoC and SM-N981B support"
> 
> [1] https://github.com/ivoszbg/uniLoader
> 
> Changes in v4:
>  - Rebase from krzk's kernel tree to accomodate
>    for the merge of r8s
>  - Rename exynos990-hubble-common.dtsi
>    to exynos990-x1s-common.dtsi


What else happened here?

b4 diff '20241203080327.4751-2-umer.uddin@mentallysanemainliners.org'
Checking for older revisions
Grabbing search results from lore.kernel.org
  Added from v3: 9 patches
---
Analyzing 29 messages in the thread
WARNING: duplicate messages found at index 3
   Subject 1: arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)
   Subject 2: arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)
  2 is not a reply... assume additional patch
WARNING: duplicate messages found at index 4
   Subject 1: arm64: dts: exynos: Add initial support for Samsung Galaxy S20 (x1slte)
   Subject 2: arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)
  2 is not a reply... assume additional patch
WARNING: duplicate messages found at index 1
   Subject 1: dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B and SM-G980F board
   Subject 2: dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B and SM-G980F board
  2 is not a reply... assume additional patch
WARNING: duplicate messages found at index 2
   Subject 1: arm64: dts: exynos: Add initial support for Samsung Galaxy S20 Series boards (hubble)
   Subject 2: dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B and SM-G980F board
  2 is not a reply... assume additional patch
Preparing fake-am for v3: dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B and SM-G980F board
ERROR: v3 series incomplete; unable to create a fake-am range

Working with these series is a pain.

Best regards,
Krzysztof

Re: [PATCH v4 3/4] arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)

[Krzysztof Kozlowski]

On 03/12/2024 09:03, Umer Uddin wrote:
>  arch/arm64/boot/dts/exynos/Makefile          |  1 +
>  arch/arm64/boot/dts/exynos/exynos990-x1s.dts | 28 ++++++++++++++++++++
>  2 files changed, 29 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos990-x1s.dts
> 
> diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
> index 948a2c6cb..6959acfbb 100644
> --- a/arch/arm64/boot/dts/exynos/Makefile
> +++ b/arch/arm64/boot/dts/exynos/Makefile
> @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \
>  	exynos850-e850-96.dtb		\
>  	exynos8895-dreamlte.dtb		\
>  	exynos990-c1s.dtb		\
> +	exynos990-x1s.dtb		\
>  	exynos990-r8s.dtb               \

Keep the order (sorted).


Best regards,
Krzysztof

Re: Re: [PATCH v3 3/4] arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)

[Umer Uddin]

On 06/12/2024 14:11:28 +0100, Krzysztof Kozlowski wrote:

> Keep the order (sorted).
>
>
> Best regards,
> Krzysztof

Hi Krzysztof, really sorry that had went through, I had seen the error,
but by then it was too late and it was already sent off... I have
sent v5 off though, which should merge properly as the order has been
fixed.

Best Regards,
Umer